Q.Find the points at which the function f given by f(x)=(x−2)4(x+1)3 has
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Derivative Sign Analysis
Derivative Sign Analysis: What the Slope Tells You
Imagine walking along a hilly road — sometimes uphill, sometimes downhill, occasionally flat. The derivative at any point is simply the slope of the road under your feet at that instant.
Derivative sign analysis figures out where a function is increasing, where it is decreasing, and where it has flat spots (critical points) — all from the sign of its derivative.
The Intuition First
If f′(x) is positive, the function is increasing — the graph rises as you move right. If f′(x) is negative, it is decreasing. If f′(x)=0, there is a horizontal tangent — a potential peak, valley, or flat inflection.
The key: a single point tells you little; you look at intervals. If f′(x)>0 for all x in (a,b), the function is strictly increasing on that whole interval. Same logic for negative.
The analysis is local — it describes behaviour on intervals, not isolated points. A zero derivative at a single point doesn't guarantee a max or min; check the sign change across that point.
The Precise Statement
Let f be differentiable on an open interval I. Then:
- If f′(x)>0 for all x in I, then f is strictly increasing on I.
- If f′(x)<0 for all x in I, then f is strictly decreasing on I.
- If f′(x)=0 for all x in I, then f is constant on I.
Points where f′(x)=0 (or where f′ does not exist) are critical points — the candidates for local maxima and minima.
If f′(x)>0 on (a,b)⟹f increasing on (a,b)
If f′(x)<0 on (a,b)⟹f decreasing on (a,b)
How to Perform It (Step-by-Step)
- Find the derivative f′(x).
- Find critical points: solve f′(x)=0 and check where f′(x) is undefined (but f is defined).
- Plot these on a number line — they split the domain into intervals.
- Pick a test point inside each interval and evaluate f′; only the sign matters.
- Record the sign in each interval and interpret: + means increasing, – means decreasing.
A Concrete Example
Take f(x)=x3−3x.
Step 1: f′(x)=3x2−3=3(x−1)(x+1).
Step 2: Critical points: x=−1 and x=1.
Step 3: Intervals: (−∞,−1), (−1,1), (1,∞).
Step 4: Test points:
- x=−2: f′(−2)=3(4−1)=9>0.
- x=0: f′(0)=−3<0.
- x=2: f′(2)=9>0.
Step 5: So f increases on (−∞,−1), decreases on (−1,1), increases on (1,∞). Thus x=−1 is a local maximum (sign changes + to –), and x=1 is a local minimum (– to +). …
Idea: Differentiate, factor, and use the sign change of f′ (first derivative test) at each critical point.
f(x)=(x−2)4(x+1)3. By the product rule,
f′(x)=4(x−2)3(x+1)3+3(x−2)4(x+1)2.
Factor out (x−2)3(x+1)2:
f′(x)=(x−2)3(x+1)2[4(x+1)+3(x−2)]=(x−2)3(x+1)2(7x−2).
Critical points: x=−1, x=72, x=2.
Sign of f′ (note (x+1)2≥0 never changes sign):
- x<−1: (−)(+)(−)=+
- −1<x<72: (−)(+)(−)=+
- 72<x<2: (−)(+)(+)=−
- x>2: (+)(+)(+)=+
Classify: …
With f′(x)=(x−2)3(x+1)2(7x−2), the sign of f′ gives a local maximum at x=72, a local minimum at x=2, and a point of inflexion at x=−1.
The plan
To locate maxima, minima and inflexions we look at where the slope f′(x) is zero and, crucially, how the sign of f′ changes there. Positive-to-negative means a peak (local max); negative-to-positive means a valley (local min); no change means a horizontal point of inflexion.
Step 1 — Differentiate and factor
f(x)=(x−2)4(x+1)3.
Using the product rule,
f′(x)=4(x−2)3(x+1)3+3(x−2)4(x+1)2.
Both terms share (x−2)3(x+1)2, so
f′(x)=(x−2)3(x+1)2[4(x+1)+3(x−2)].
Simplify the bracket: 4x+4+3x−6=7x−2. Hence
f′(x)=(x−2)3(x+1)2(7x−2).
Step 2 — Critical points
Set f′(x)=0:
(x−2)3=0⇒x=2,(x+1)2=0⇒x=−1,7x−2=0⇒x=72.
In increasing order these are x=−1, 72, 2.
Step 3 — Sign chart of f′
The factor (x+1)2 is never negative, so it cannot switch the sign of f′ — it only makes f′ vanish at x=−1. The sign of f′ is therefore controlled by (x−2)3 (same sign as x−2) and (7x−2).
| Interval | (x−2)3 | (x+1)2 | (7x−2) | f′(x) |
|---|---|---|---|---|
| (−∞,−1) | − | + | − | + |
| (−1,72) | − | + | − | + |
| (72,2) | − | + | + | − |
| (2,∞) | + | + | + | + |
Step 4 — Classify each critical point …
Method: Classifying Critical Points Using Root Multiplicity in the First Derivative
This method locates and classifies every local maximum, local minimum, and point of inflexion of a function whose derivative factors into repeated linear factors — very common when the original function is itself a product of powers, like (x−a)m(x−b)n.
Steps
Step 1: Differentiate using the product rule and factor out the common part
For f(x)=(x−p)m(x−q)n, apply the product rule and notice both resulting terms share the factor (x−p)m−1(x−q)n−1 — pull it out to leave a simple linear bracket behind.
f′(x)=(x−p)m−1(x−q)n−1[m(x−q)+n(x−p)]
Step 2: Identify every critical point, keeping track of each factor's multiplicity (exponent)
Set each factor of f′(x) to zero. Note the exponent on each repeated factor — this exponent is the key to classification in the next step.
Step 3: Build a sign chart, using the multiplicity rule to shortcut the sign of each factor …
Common Mistakes
Mistake 1: Assuming every zero of f′(x) is automatically a local maximum or minimum
Why it's wrong: a root of f′ coming from a factor raised to an even power (like (x+1)2 here) makes f′=0 at that point but does NOT change the sign of f′ on either side, so the curve keeps rising (or keeps falling) through it — it's a point of inflexion, not an extremum. Correct approach: always check the sign of f′ on both sides of every critical point before classifying it; the exponent's parity is a fast shortcut, but only once you've confirmed why it works with the sign chart.
Mistake 2: Making an arithmetic slip when combining the two product-rule terms into one bracket …
Showing the 12 most recent of 15 on this concept.
- AP EAPCET 2022Set eng-2022-07-08-FN1 markMCQQ.At x=0, f(x)=cosx−1+2x2−3x3 (A) has a minimum value (B) has a maximum value (C) has no extremum value (D) is not defined
›Reveal solutionSolution
The Taylor expansion of f about x=0 has leading term −x3/3 (odd power), so f passes through 0 changing sign — an inflection-type behavior, not an extremum.
Concept and Intuition
At a candidate critical point, if the first nonzero derivative is of odd order, the function does not have a local extremum there (it's increasing or decreasing straight through); only an even-order first-nonzero derivative gives a genuine min/max.
Step-by-Step Solution
- cosx=1−2x2+24x4−…
- f(x)=cosx−1+2x2−3x3=(1−2x2+24x4)−1+2x2−3x3+⋯=−3x3+24x4+…
- Near x=0, f(x)≈−3x3: for small x>0, f<0; for small x<0, f>0 (since −(−∣x∣)3/3=∣x∣3/3>0).
- So f changes sign through x=0 rather than staying one-signed on both sides — confirming this is not a local extremum. …
- AP EAPCET 2026Set eng-2026-05-12-FN1 markMCQQ.In the interval (−∞,0) the function f(x)=x2+x128 (A) has only one local minimum value at x=4 (B) has one maximum and one minimum at x=4 and x=−4 respectively (C) is increasing (D) is decreasing
›Reveal solutionSolution
Checking the sign of f′(x)=2x−128/x2 on (−∞,0) shows it is always negative there, so the function is monotonically decreasing throughout the interval — no local max/min occurs in this domain.
Concept and Intuition
A function's monotonic behaviour on an interval is read off the sign of its derivative there. Critical points (where f′=0) only matter if they actually lie inside the interval in question; a critical point outside the interval is irrelevant to that interval's monotonicity.
Step-by-Step Solution
- f(x)=x2+x128. Differentiate: f′(x)=2x−x2128.
- Find critical points: f′(x)=0⇒2x=x2128⇒2x3=128⇒x3=64⇒x=4.
- The only critical point is x=4, which is not in (−∞,0).
- Check the sign of f′(x) for any x<0: 2x is negative (since x<0); x2>0 always, so x2128>0, making −x2128 negative.
- So f′(x) is the sum of two negative quantities for every x<0: f′(x)<0 throughout (−∞,0). …
- AP EAPCET 2025Set eng-2025-05-23-FN1 markMCQQ.Let P(x)=x4+ax3+bx2+cx+d be such that x=0 is the only real root of P1(x)=0. If P(−1)<P(1), then in the interval [−1,1] (A) P(-1) is not minimum of P(x), but P(1) is the maximum of P(x) (B) P(-1) is minimum of P(x), but P(1) is not the maximum of P(x) (C) Neither P(-1) is the minimum nor P(1) is the maximum of P(x) (D) P(-1) is the minimum and P(1) is the maximum of P(x)
›Reveal solutionSolution
This tests reading the sign of P′ from the structure of a cubic with a single real root; P turns out to be strictly decreasing then increasing with its minimum at the interior point x=0, so P(−1) is never the minimum, while the given inequality forces P(1) to be the maximum.
Concept and Intuition
A quartic's monotonicity on an interval is governed by the sign of its derivative, a cubic here. If that cubic has only one real root, the other two roots are a complex-conjugate pair, so the cubic (as a real function) doesn't change sign there — it only changes sign at the single real root. That tells us P has exactly one turning point on all of R, at x=0, and it must be a minimum (since P→+∞ both ways, being a quartic with positive leading coefficient).
Step-by-Step Solution
- P′(x)=4x3+3ax2+2bx+c. Since x=0 is a root, P′(0)=c=0.
- So P′(x)=4x3+3ax2+2bx=x(4x2+3ax+2b).
- For x=0 to be the only real root of P′, the quadratic factor 4x2+3ax+2b must have no real zero, i.e. discriminant 9a2−32b<0. Since its leading coefficient 4>0 and it has no real root, 4x2+3ax+2b>0 for all real x.
- Therefore P′(x)=x⋅(always positive), so P′(x)<0 for x<0 and P′(x)>0 for x>0: P is strictly decreasing on [−1,0] and strictly increasing on [0,1]. …
- AP EAPCET 2023Set eng-2023-05-19-FN1 markMCQQ.The maximum value of 'a' such that the second derivative of x4+ax3+23x2+1 is positive for all real x is (A) 3 (B) −3 (C) 2 (D) −2
›Reveal solutionSolution
The second derivative is a quadratic in x; positivity for all x requires a non-positive discriminant, which bounds a.
Concept and Intuition
An upward-opening quadratic Ax2+Bx+C (here in x, with A=12>0) is ≥0 for all real x exactly when its discriminant B2−4AC≤0.
Step-by-Step Solution
- f(x)=x4+ax3+23x2+1.
- f′(x)=4x3+3ax2+3x.
- f′′(x)=12x2+6ax+3.
- Require f′′(x)≥0 for all real x (boundary case of the required positivity): discriminant of 12x2+6ax+3 is (6a)2−4(12)(3)=36a2−144.
- Need 36a2−144≤0⇒a2≤4⇒−2≤a≤2. …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If the tangent drawn to the curve y=x3−ax2+x+1 at each point x∈R, is inclined at an acute angle with the positive direction of X-axis, then the set of all possible values of 'a' is (A) R−(−3,3) (B) [−3,3] (C) R (D) (−3,3)
›Reveal solutionSolution
The tangent slope 3x2−2ax+1 must stay strictly positive for all real x; requiring a negative discriminant gives a∈(−3,3).
Concept and Intuition
"Tangent inclined at an acute angle with the positive x-axis" means the tangent's slope is strictly positive (an acute angle has tanθ>0). Since this must hold for every real x (the curve's domain), the derivative — a quadratic in x — must never touch or cross zero; it must be strictly positive throughout.
Step-by-Step Solution
- y=x3−ax2+x+1⇒y′=3x2−2ax+1.
- Require y′>0 for all x∈R.
- A quadratic Ax2+Bx+C with A>0 is positive for all x iff its discriminant B2−4AC<0.
- Here A=3, B=−2a, C=1: discriminant =4a2−12.
- Require 4a2−12<0⇒a2<3⇒−3<a<3. …
- AP EAPCET 2025Set eng-2025-05-21-FN1 markMCQQ.If the function y=g(x) representing the slopes of the tangents drawn to the curve y=3x4−5x3−12x2+18x+3 is strictly increasing then the domain of g(x) is (A) [−21,34] (B) (2−1,34) (C) R−(2−1,43) (D) R−[2−1,34]
›Reveal solutionSolution
The "slope function" g(x) is the derivative of the given quartic; its own strict increase is governed by g′(x)>0, i.e. a second derivative test producing a quadratic inequality. Answer: R−[−21,34].
Concept and Intuition
g(x), "the slope of the tangent" to y=3x4−5x3−12x2+18x+3, is exactly y′(x) — a new function in its own right. Asking where this function is strictly increasing is asking where g′(x)=y′′(x)>0, i.e. a standard increasing/decreasing analysis one derivative order up.
Step-by-Step Solution
- y=3x4−5x3−12x2+18x+3, so g(x)=y′=12x3−15x2−24x+18.
- g is strictly increasing where g′(x)>0: g′(x)=36x2−30x−24.
- Factor out 6: g′(x)=6(6x2−5x−4).
- Solve 6x2−5x−4=0: discriminant =25+96=121=112, so x=125±11, giving x=1216=34 and x=12−6=−21.
- Since the coefficient of x2 is positive, 6x2−5x−4>0 outside the roots and <0 between them: positive for x<−21 or x>34. …
- AP EAPCET 2026Set eng-2026-05-14-FN1 markMCQQ.The cubic equation 2x3−3x2+6x+2=0 (A) has 3 distinct real roots (B) has only one real root in the interval (−1,0) (C) has two distinct real roots (D) has only one real root in the interval (0,1)
›Reveal solutionSolution
Showing f′(x)>0 always (via a negative-discriminant quadratic) proves the cubic is strictly increasing and has exactly one real root; sign checking at −1 and 0 locates it in (−1,0).
Concept and Intuition
A cubic with a strictly positive (or always negative) derivative is monotonic, and a monotonic continuous function can cross zero at most once — so it has exactly one real root. To locate that root, use the Intermediate Value Theorem: find two points where the function has opposite signs, and the root must lie between them.
Step-by-Step Solution
- Let f(x)=2x3−3x2+6x+2. Compute f′(x)=6x2−6x+6=6(x2−x+1).
- Check the discriminant of x2−x+1: D=(−1)2−4(1)(1)=1−4=−3<0. Since the discriminant is negative and the leading coefficient is positive, x2−x+1>0 for all real x.
- So f′(x)=6(x2−x+1)>0 for all x — f is strictly increasing on R, hence it can have at most (and, being an odd-degree polynomial, exactly) one real root.
- This immediately rules out "3 distinct real roots" and "two distinct real roots".
- To locate the root, evaluate f at convenient points: f(−1)=2(−1)−3(1)+6(−1)+2=−2−3−6+2=−9 (negative). f(0)=0−0+0+2=2 (positive). f(1)=2−3+6+2=7 (positive). …
- AP EAPCET 2021Set eng-2021-08-19-FN1 markMCQQ.For which value(s) of 'a', f(x)=−x3+4ax2+2x−5 is decreasing for every 'x'? (A) (1,2) (B) (3,4) (C) R (D) No value of 'a'
›Reveal solutionSolution
f′(x)=−3x2+8ax+2 always attains a positive maximum for every real a, so f can never be decreasing for all x — the answer is "no value of a."
Concept and Intuition
For f to be decreasing on all of R, its derivative must be ≤0 everywhere. f′(x) here is a downward-opening parabola in x, so as x→±∞ it's automatically negative — the only risk is its peak (vertex) value going positive. If that peak is always positive regardless of a, no a can work.
Step-by-Step Solution
- Differentiate: f′(x)=−3x2+8ax+2.
- This is a downward parabola in x (leading coefficient −3<0), with vertex at x0=2(−3)−8a=34a.
- Maximum value of f′ at the vertex:
f′(x0)=−3(34a)2+8a(34a)+2=−316a2+332a2+2=316a2+2.
- Since 316a2≥0 for every real a, the maximum of f′ is always ≥2>0. …
- AP EAPCET 2024Set eng-2024-05-21-FN1 markMCQQ.If f(x)=xx, then the interval in which f(x) decreases is (A) [0,e1] (B) [0,e] (C) [e1,∞] (D) [0,ee]
›Reveal solutionSolution
Differentiate xx using logarithmic differentiation and find where the derivative is negative.
Concept and Intuition
A function decreases where its derivative is negative. Since xx itself is always positive on its domain x>0, the sign of f′(x) is controlled entirely by the factor (logx+1).
Step-by-Step Solution
- f(x)=xx. Take logs: logf=xlogx.
- Differentiate: ff′=logx+1, so f′(x)=xx(logx+1).
- Since xx>0 for all x>0, the sign of f′(x) matches the sign of (logx+1).
- f′(x)<0⟺logx+1<0⟺logx<−1⟺x<e−1=e1. …
- AP EAPCET 2025Set eng-2025-05-26-AN1 markMCQQ.If the displacement S of a particle travelling along a straight line in t seconds is given by S=2t3+2t2−2t−3, then the time taken (in seconds) by the particle to change its direction is (A) 31 (B) 2 (C) 3 (D) 21
›Reveal solutionSolution
A particle changes direction exactly when its velocity is zero and changes sign there. Answer: t=31 s.
Concept and Intuition
Direction of motion is given by the sign of velocity v=dS/dt. The particle reverses direction only at a time where v=0 and v actually changes sign across that instant (not merely touches zero, e.g. at an inflection with no sign change).
Step-by-Step Solution
- S=2t3+2t2−2t−3⇒v=dtdS=6t2+4t−2.
- Factor: v=2(3t2+2t−1)=2(3t−1)(t+1).
- v=0⇒t=31 or t=−1. Since time t≥0, only t=31 is physically valid. …
- AP EAPCET 2023Set eng-2023-05-16-AN1 markMCQQ.A(1,15), B(3,−12), C(6,12) are three consecutive turning points of a continuous curve y=f(x). If f(x)=0 only for x=α and x=β, then ∣β−α∣< (A) 27 (B) 2 (C) 5 (D) 24
›Reveal solutionSolution
The two zeros lie strictly between consecutive turning points; bounding α∈(1,3) and β∈(3,6) gives ∣β−α∣<5.
Concept and Intuition
Between a positive local extreme value and a negative one, a continuous curve must cross zero at least once (Intermediate Value Theorem). The turning points bracket where each zero can occur.
Step-by-Step Solution
- At x=1, f=15>0 (local extreme); at x=3, f=−12<0 (local extreme); so by IVT, f has a zero α strictly between 1 and 3: 1<α<3.
- At x=3, f=−12<0; at x=6, f=12>0; so f has a zero β strictly between 3 and 6: 3<β<6. …
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.The curve represented by x=t5+5t3+20t+7 and y=4t3−3t2−18t+3 is decreasing in the interval (A) (−2,−1) (B) (3/2,2) (C) (−1,3/2) (D) (−2,2)
›Reveal solutionSolution
For a parametric curve with x′(t) always positive, the curve decreases in y exactly where y′(t)<0. Here that interval is (−1,3/2).
Concept and Intuition
For a curve given parametrically, dxdy=dx/dtdy/dt. The curve is 'decreasing' (as a function y of x) precisely where this ratio is negative. If dx/dt never changes sign (stays positive throughout), then the sign of dy/dx is simply the sign of dy/dt — so we only need to analyze dy/dt.
Step-by-Step Solution
- Differentiate x=t5+5t3+20t+7: dtdx=5t4+15t2+20=5(t4+3t2+4).
- Check the sign of t4+3t2+4: substituting u=t2≥0, this is u2+3u+4, whose discriminant is 9−16=−7<0, so it's always positive. Hence dtdx>0 for every real t — x is strictly increasing in t.
- Differentiate y=4t3−3t2−18t+3: dtdy=12t2−6t−18=6(2t2−t−3)=6(2t−3)(t+1). …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.