Q.Locate and label any five of the following geographical features on the political outline map of India with appropriate symbols (on page 15) : (22.1) The State having the highest rank in the Human Development Index (22.2) The State having highest population density (2011) (22.3) The leading groundnut producer State (22.4) Bailadila – iron ore mines (22.5) An oil refinery in Punjab (22.6) A centre of cotton textile industry in Karnataka (22.7) The major seaport in Andhra Pradesh (22.8) The eastern terminal station of East-West Corridor [Note : The following questions are for the Visually Impaired Candidates only, in lieu of Q. No. 22. Attempt any five questions. (22.1) Which State of India has the highest rank in the Human Development Index ? (22.2) In which State of India is the density of population (2011) the highest ? (22.3) Which State of India is the leading producer in groundnut ? (22.4) In which State are the Bailadila – iron ore mines located ? (22.5) Name the oil refinery located in Punjab. (22.6) Name any centre of cotton textile industry located in Karnataka. (22.7) Name the major sea port located in Andhra Pradesh. (22.8) Name the easternmost place of East-West Corridor.]

The idea of a foot loose industry is one of the most freeing concepts in industrial geography. Unlike heavy industries that must huddle near coal mines, iron ore deposits, or ports to keep transport costs low, foot loose industries produce goods that are light, compact, and high in value relative to their weight. Think of electronics assembly, diamond cutting, software development, or precision instruments. The raw materials they use are often small and easily shipped, and the finished product is even more valuable per kilogram. This means the cost of moving either inputs or outputs is a tiny fraction of the total production cost — so the factory does not have to be anchored to any particular resource.

Because of this, foot loose industries can indeed be located in a wide variety of places. A company making microchips can set up in a bustling city, a quiet suburb, a special economic zone, or even a remote town — as long as it can get a reliable supply of electricity, clean water, and skilled workers. The assertion (A) is therefore correct. …

The question tests your ability to identify towns whose primary economic base is mining or quarrying of minerals. A mining town is not just any town that happens to have a mine nearby — it is a settlement that grew specifically because of mineral extraction, often planned around the mine or oilfield. The key is to check each town in the options against this definition.

Let’s examine each option:

1. Option (A): Kandla, Kochchi, Kozhikode

   Kandla is a major port town (handling cargo, not mining). Kochchi (Kochi) is a port city and commercial hub. Kozhikode is a historical trading port. None of these are mining towns — they are port/coastal cities.

2. Option (B): Ankaleshwar, Singrauli, Digboi

   • Ankaleshwar (Gujarat): Grew around the Ankaleshwar oilfield, one of India’s oldest onshore oil-producing regions. It is a classic mining town (petroleum extraction).
   • Singrauli (Madhya Pradesh/Uttar Pradesh border): A major coal-mining and thermal power hub. The town developed due to vast coal reserves.
   • Digboi (Assam): India’s oldest oilfield and refinery town, established in the late 19th century. Entirely a petroleum mining settlement. All three are unequivocally mining towns.

3. Option (C): Mumbai, Salem, Modinagar

   Mumbai is a financial and commercial capital, not a mining town (though it has a port). Salem is an industrial city (steel, textiles) but not primarily a mining settlement — though it has nearby mineral deposits, the town itself is not a mining town. Modinagar is an industrial town (sugar, textiles) with no mining base. So this option fails.

4. Option (D): Varanasi, Roorki, Aligarh …

To understand which industries are the worst offenders for water pollution, you first need to recall the concept of industrial location factors — but here the focus shifts to the environmental impact of that location. Industries are not just placed near raw materials or markets; they also release effluents into rivers, lakes, and groundwater. The key question is: which industries produce the most harmful liquid waste?

The answer lies in the nature of the raw materials and processes involved. Industries that use large amounts of water and chemicals, or that process organic matter (like animal hides or wood pulp), tend to generate highly polluted wastewater. This wastewater often contains high biological oxygen demand (BOD), toxic heavy metals, acids, alkalis, and suspended solids.

Let’s examine the options:

• Leather, pulp and paper — Tanneries use chromium and other chemicals to treat hides; the wastewater is dark, foul-smelling, and loaded with toxic metals and organic matter. Pulp and paper mills discharge lignin, bleaching agents, and suspended solids that deplete oxygen in water bodies. These are classic, well-documented water polluters.
• Iron, copper and sugar — Iron and copper smelting produce more air pollution (particulates, sulfur dioxide) than water pollution, though some heavy metals can leach. Sugar mills generate organic waste (bagasse, molasses) but the pollution is largely biodegradable and less toxic than leather or paper waste.
• Sugar, petrochemical and fertilizer — Petrochemical and fertilizer industries are indeed major water polluters (hydrocarbons, nitrates, phosphates), but sugar is relatively less harmful. This mix is not the most consistently severe across all three.
• Cotton textile, chemical and power plant — Textile dyeing releases synthetic dyes and heavy metals; chemical plants produce a wide range of toxic effluents; power plants (especially thermal) discharge hot water and some ash slurry. This is a strong contender, but the combination in option (A) — leather, pulp and paper — is more universally recognised as the most concentrated source of toxic, high-BOD, and metal-laden wastewater. …

The idea of footloose industries comes straight from the geography of industrial location. Most industries are "weight-losing" or "bulk-gaining" — they need to be near raw materials, power sources, or large markets to keep transport costs low. A steel plant, for example, sits close to iron ore and coal because hauling those heavy ores over long distances would be ruinously expensive. Footloose industries are the opposite. They use light, high-value inputs and produce small, valuable outputs. Think of electronics assembly, diamond cutting, software development, or precision instruments. The raw materials are not heavy, the finished product is not heavy, and the production process does not consume vast amounts of power or water. So the factory can go almost anywhere — a city, a small town, a special economic zone — as long as one condition is met.

That condition is transport connectivity. Because the inputs and outputs are light, the cost of moving them is not a barrier. But the factory still needs to receive components and ship out finished goods reliably. A diamond polisher in Surat needs a steady flow of rough stones from abroad and a way to send polished gems to Mumbai or Antwerp. A software firm in Bengaluru needs fast internet and air links for its engineers and clients. So the critical factor is not proximity to a coal mine or a port, but access to a transport network — roads, railways, airports, or a combination. Without that, even a footloose industry cannot function.

Open-cast mining, also known as open-pit or open-cut mining, is a surface mining technique where minerals are extracted from an open pit or borrow. This method is typically employed when mineral deposits are found relatively close to the Earth's surface and are spread over a large area. Understanding its fundamental characteristics helps in evaluating the given statements.

Here's a breakdown of each statement:

1. Statement I: "This is the cheapest way of mining."

   Open-cast mining generally involves removing the overlying rock and soil (overburden) to expose the mineral deposit. Compared to underground mining, it avoids the high costs associated with constructing and maintaining shafts, tunnels, and extensive support systems deep below the surface. While it requires significant earth-moving equipment, the overall cost per unit of mineral extracted is often lower, especially for large, shallow deposits. This makes it an economically attractive method for many types of mineral extraction.

   • Conclusion: Statement I is correct.

2. Statement II: "The output is in large quantity."

   Open-cast mines are designed to extract vast quantities of ore or coal. The large scale of operations, utilizing massive excavators, dump trucks, and other heavy machinery, allows for very high production rates. This method is particularly suited for low-grade, high-volume deposits where extracting a large amount of material is necessary to achieve economic viability.

   • Conclusion: Statement II is correct.

3. Statement III: "It requires specially designed lifts, drills." …

The question asks why Kolkata port has minimised its significance — meaning, why has it lost its former importance as a major port? This is a classic geography question about the decline of a once-dominant port. The key is to identify the physical and operational constraints that have reduced its capacity, not just list features that are true but irrelevant.

Let's examine each option carefully.

1. Option (A): "It has a vast hinterland"

   A vast hinterland (the area served by the port) is actually an advantage — it brings more trade and traffic. Having a large hinterland would increase a port's significance, not minimise it. So this cannot be the reason for decline. It's a distractor: true in fact, but opposite in effect.

2. Option (B): "Accumulation of silt in Hugli river"

   This is the core physical problem. Kolkata port is located on the Hugli River, a distributary of the Ganga. The river carries enormous amounts of silt from the Himalayas and the Gangetic plains. This silt gets deposited in the river channel, especially near the mouth, making the water shallow. Large cargo ships require a certain depth (draft) to enter and dock — typically 8–10 metres or more. Siltation reduces the draft to as low as 3–4 metres in some stretches, forcing ships to wait for high tide or use smaller vessels. Dredging is expensive and only partially effective. This directly limits the port's capacity to handle modern, large vessels.

3. Option (C): "Diversion of exports to other ports"

   This is a consequence of the silt problem, not a root cause. Because Kolkata port cannot handle large ships, exporters and shipping lines divert cargo to other ports like Paradip, Haldia, or even Mumbai and Chennai. But the reason for that diversion is the siltation. So while this statement is factually true, it is not the primary cause — it's an effect. The question asks for the cause of minimised significance.

4. Option (D): "Passenger traffic is very low" …