Q.Find whether the function is continuous or discontinuous at the indicated point: f(x)={3x+5,x2,x≥2x<2 at x=2.
Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check
Is f(x)=∣x∣ continuous at x=0? f(0)=0, limx→0∣x∣=0, and the two agree — yes, even though ∣x∣ has a sharp corner. Continuity demands no break, not smoothness.
Takeaway: continuity at a point means the function value and the two one-sided limits all agree. Agreement ⇒ the graph passes through unbroken; disagreement ⇒ a discontinuity.
Continuity at a Point is the opening idea of the CBSE Class 12 Continuity and Differentiability chapter, and the three-condition test described here matches exactly what NCERT exercises and "continuity and differentiability class 12 important questions" expect students to apply. This concept is also foundational for JEE Main and NEET, where checking continuity is often the first step before testing differentiability of a function.
Concept: Continuity at a point — check whether f(2), the left-hand limit, and the right-hand limit all agree.
Function value: since x≥2 uses 3x+5, f(2)=3(2)+5=11.
Left-hand limit (x→2−, use x2): limx→2−x2=4.
Right-hand limit (x→2+, use 3x+5): limx→2+(3x+5)=11.
Since 4=11, the two one-sided limits differ, so limx→2f(x) does not exist and continuity fails.
f is discontinuous at x=2: the left-hand limit is 4 but the right-hand limit is 11 (a jump), so limx→2f(x) does not exist.
At x=2 the left-hand limit is 4 (from x2) but the right-hand limit is 11 (from 3x+5); they disagree, so f is discontinuous at x=2.
The idea
For f to be continuous at x=2 we need three things to match: the value f(2), the limit coming from the left, and the limit coming from the right. The rule changes exactly at x=2, so that boundary is the only place trouble can appear.
Step-by-step
1. Function value at x=2. The condition x≥2 selects the piece 3x+5:
f(2)=3(2)+5=11.
2. Left-hand limit. For x<2 the function is x2:
limx→2−f(x)=limx→2−x2=22=4.
3. Right-hand limit. For x≥2 the function is 3x+5:
limx→2+f(x)=limx→2+(3x+5)=11.
4. Compare. The left limit is 4 and the right limit is 11. Because
limx→2−f(x)=4=11=limx→2+f(x),
the two-sided limit limx→2f(x) does not exist. With no limit, the continuity test fails no matter what f(2) is — the graph jumps from height 4 up to 11 at x=2.
f is discontinuous at x=2 (jump discontinuity: LHL =4, RHL =11).
Method: Testing Continuity of a Piecewise Function at the Boundary Point
Use this method whenever a function is defined by different formulas on either side of a specific point, and you must decide whether it is continuous there.
Steps
Step 1: Determine which piece defines f(a)
Check which inequality includes the equality sign at the boundary point — that piece is the one used to compute f(a) itself.
Step 2: Compute the left-hand limit
Using the formula that applies for x values strictly less than a, evaluate limx→a−f(x) by direct substitution (assuming that piece is itself a continuous function like a polynomial).
Step 3: Compute the right-hand limit
Using the formula that applies for x values greater than (or equal to, depending on how the pieces are split) a, evaluate limx→a+f(x) similarly.
Step 4: Compare all three values
Continuous at a⟺limx→a−f(x)=limx→a+f(x)=f(a).
If the two one-sided limits disagree, stop there — the two-sided limit does not exist, so the function is discontinuous regardless of what f(a) equals (a jump discontinuity). If they agree with each other but not with f(a), that's a different kind of discontinuity (removable/misplaced-point). Only if all three agree is the function continuous.
Common Mistakes
Mistake 1: Assuming continuity just because f(a) is defined
A student might see that f(2)=11 is a perfectly valid number and stop there, concluding the function must be continuous simply because it has a value at that point. Why it's wrong: being defined at a point is only one of the three continuity conditions — the one-sided limits must also exist and agree with that value. Correct approach: always compute both one-sided limits explicitly before drawing any conclusion, even when f(a) looks unremarkable.
Mistake 2: Using the wrong piece for one of the one-sided limits
Because the boundary condition is x≥2 (not x>2), it's tempting to also use the 3x+5 piece when computing the left-hand limit as x→2−. Why it's wrong: the left-hand limit must use only the formula valid for x strictly less than 2, which here is x2 — mixing up which piece belongs to which side directly causes a wrong (and possibly misleadingly "matching") answer. Correct approach: re-read the domain conditions carefully before choosing which formula to use for each one-sided limit.
Showing the 12 most recent of 20 on this concept.
- CBSE 2023Set 65/1/11 markMCQQ.The value of k for which f(x)={3x+5,kx2,x≥2x<2 is a continuous function, is : (A) −411 (B) 114 (C) 11 (D) 411
›Reveal solutionSolution
For a piecewise function to be continuous at the join point x=2, the left-hand limit and right-hand limit must equal the function value at x=2. Equating k(2)2 with 3(2)+5 gives 4k=11, so k=411. The correct option is (D).
The Core Idea: Continuity at a Point
A function is continuous at a point if three things match perfectly — the value from the left, the value from the right, and the actual function value at that point. For a piecewise function like this one, the only place where things could break is at the boundary where the formula changes, which is x=2.
Think of it like two roads meeting at a junction. For a smooth ride, the elevation of the left road as you approach the junction must exactly match the elevation of the right road as you approach from the other side — and that elevation must also be the height of the junction itself. If they don't match, there's a jump, and the function is discontinuous.
Here, the left piece (x<2) uses kx2, and the right piece (x≥2) uses 3x+5. The function value at x=2 is given by the right piece (since x≥2 includes 2). So we need the left-hand limit to equal that value.
Step-by-Step Solution
1. Find the function value at x=2.
Since x=2 falls in the case x≥2, we use f(x)=3x+5.
f(2)=3(2)+5=6+5=11
2. Find the left-hand limit as x→2−.
For x<2, the function is f(x)=kx2. As x approaches 2 from the left, we simply substitute x=2 into this expression (since kx2 is a polynomial and polynomials are continuous everywhere).
limx→2−f(x)=limx→2−kx2=k(2)2=4k
3. Find the right-hand limit as x→2+.
For x>2, the function is f(x)=3x+5. Again, this is a polynomial, so the limit is just the value at x=2.
limx→2+f(x)=limx→2+(3x+5)=3(2)+5=11
4. Apply the continuity condition.
For f to be continuous at x=2, we need:
limx→2−f(x)=limx→2+f(x)=f(2)
We already have limx→2+f(x)=11 and f(2)=11, so the right-hand side is consistent. The only condition left is:
4k=11
5. Solve for k.
k=411
Watch outA common mistake is to forget that f(2) is defined by the x≥2 piece, not by the x<2 piece. Some students incorrectly set k(2)2=3(2)+5 but then forget that f(2) itself is 11, so they end up solving 4k=11 correctly anyway — but the reasoning is incomplete. Always check all three parts: left limit, right limit, and function value.
TipIn piecewise functions where each piece is a polynomial, the only potential trouble is at the boundary. You never need to compute limits using ϵ-δ here — just substitute the boundary point into each piece, because polynomials are continuous everywhere. The entire problem reduces to solving one simple equation.
✓Final answerThe value of k is 411, which corresponds to option (D).
- CBSE 2025Set 65/4/11 markMCQQ.The function f defined by f(x)={x,5,if x≤1if x>1 is not continuous at : (A) x=0 (B) x=1 (C) x=2 (D) x=5
›Reveal solutionSolution
The function has a jump at x=1 because the left-hand limit (1) and the right-hand limit (5) do not match, so it is discontinuous only at x=1. The correct option is (B).
Continuity at a point means three things must hold: the function is defined there, the limit exists there, and the limit equals the function value. For a piecewise function, the only place where things can go wrong is at the boundary between the pieces — here, at x=1. Everywhere else, the function is just a simple rule (either x or the constant 5), so it's automatically continuous.
Let’s check each candidate point.
-
At x=0
For x≤1, the rule is f(x)=x. Since 0≤1, we have f(0)=0.
The left-hand limit: limx→0−f(x)=limx→0−x=0.
The right-hand limit: limx→0+f(x)=limx→0+x=0 (because near 0, x is still ≤1).
So the limit exists and equals 0, which matches f(0). Continuous here.
-
At x=1 — the critical boundary
- Left-hand limit: as x approaches 1 from below, x≤1, so f(x)=x. Hence
limx→1−f(x)=limx→1−x=1.
- Right-hand limit: as x approaches 1 from above, x>1, so f(x)=5. Hence
limx→1+f(x)=5.
- The left and right limits are different (1=5), so the two-sided limit does not exist.
- The function value is f(1)=1 (since 1≤1). Even though f(1) equals the left-hand limit, the limit itself doesn't exist, so continuity fails.
Watch outA common mistake is to think that because f(1)=1 matches the left-hand limit, the function is continuous. But continuity requires the two-sided limit to exist and match — a single side isn't enough.
-
At x=2
For x>1, f(x)=5. So f(2)=5, and both one-sided limits are 5. Continuous.
-
At x=5
Same reasoning: f(5)=5, limits are 5. Continuous.
TipFor a piecewise function with a single break, you only ever need to test the boundary point(s). All other points inherit continuity from the individual pieces.
✓Final answerThe function is not continuous at x=1, so the correct option is (B).
-
- CBSE 2024Set 65/1/11 markMCQQ.For the function f(x)={x2+3,1,x=0x=0, which of the following statements is true? (A) f(x) is continuous and differentiable for all x∈R. (B) f(x) is continuous for all x∈R. (C) f(x) is continuous and differentiable for all x∈R−{0}. (D) f(x) is discontinuous at infinite points.
›Reveal solutionSolution
The function is a parabola with a hole at x=0 and a single isolated point at (0,1). Because the limit as x→0 is 3, not 1, the function is discontinuous at x=0 — but it is continuous and differentiable everywhere else. The correct option is (C).
The key to this problem is understanding what continuity and differentiability mean at a point, and then checking the one point where the definition changes.
Continuity at a point x=a requires three things to match: the function value f(a), the left-hand limit limx→a−f(x), and the right-hand limit limx→a+f(x). If any one of these differs, the function is discontinuous there.
Differentiability at a point requires continuity first — and then the left and right derivatives must also be equal. So if a function is discontinuous at a point, it cannot be differentiable there.
Here, the function is defined by two pieces: for every x except 0, it behaves like x2+3 (a smooth parabola shifted up by 3). At x=0 alone, it jumps to the value 1. That single point is the only place where anything unusual can happen.
Let’s check systematically.
- Check continuity at x=0 For x=0, f(x)=x2+3. As x approaches 0 from either side, x2 approaches 0, so
limx→0f(x)=02+3=3.
But f(0)=1. Since 3=1, the limit does not equal the function value.
Watch outA common mistake is to think that because the formula x2+3 is continuous everywhere, the whole function is continuous. But the definition at x=0 overrides that — the function is piecewise-defined, and the value at the breakpoint must match the limit.
Hence f is discontinuous at x=0.
-
Check continuity for x=0
For any a=0, near a the function is simply f(x)=x2+3, which is a polynomial. Polynomials are continuous everywhere. So f is continuous at every x=0.
-
Check differentiability at x=0
Since f is not continuous at 0, it cannot be differentiable there. (Differentiability implies continuity — that’s a theorem you must remember.)
-
Check differentiability for x=0
For any a=0, the function is locally just x2+3, whose derivative is 2x. Polynomials are differentiable everywhere, so f is differentiable at every x=0.
TipYou don’t need to compute left and right derivatives at 0 here — the discontinuity alone kills differentiability. But if the function were continuous at 0, you’d then check if the slopes from left and right match.
Now look at the options:
- (A) says continuous and differentiable for all x∈R. False — fails at x=0.
- (B) says continuous for all x∈R. False — discontinuous at 0.
- (C) says continuous and differentiable for all x∈R−{0}. True — that’s exactly what we found.
- (D) says discontinuous at infinite points. False — only one point of discontinuity.
✓Final answerThe correct option is (C).
- CBSE 2026Set 65/3/11 markMCQQ.The value of k for which the function f(x)={x2sinx1,k(x+1),x=0x=0 is a continuous function, is: (A) 41 (B) 2 (C) 21 (D) 0
›Reveal solutionSolution
For continuity at x=0, the limit of x2sinx1 as x→0 must equal the function value k(0+1)=k. Since the limit is 0, we need k=0.
A function is continuous at a point when three conditions align: the function is defined there, the limit exists as we approach that point, and crucially, the limit equals the function's value at that point. This problem tests whether you can recognize that continuity at x=0 creates a bridge between two different expressions.
The function behaves as x2sinx1 everywhere except at zero, where it suddenly switches to k(x+1). At x=0, this second piece gives us f(0)=k(0+1)=k. For continuity, we need:
limx→0f(x)=f(0)
Since we approach zero from the region where x=0, the relevant limit is:
limx→0x2sinx1=k
Let me find this limit.
-
Recognize the bounded oscillation
The sine function satisfies −1≤sinx1≤1 for all x=0, no matter how wildly x1 oscillates as x→0.
-
Apply the squeeze theorem
Multiplying the inequality by x2 (which is always non-negative):
−x2≤x2sinx1≤x2
- Evaluate the bounding limits As x→0:
limx→0(−x2)=0andlimx→0x2=0
- Conclude via the squeeze theorem Since x2sinx1 is squeezed between two expressions that both approach 0:
limx→0x2sinx1=0
- Match the limit to the function value For continuity at x=0:
k=limx→0x2sinx1=0
TipWhenever you see xnsinx1 or xncosx1 with n>0, the limit as x→0 is always 0 because the polynomial term dominates the bounded oscillation.
Watch outDon't try to evaluate sinx1 as x→0 directly — it oscillates infinitely and has no limit. The key is that x2 forces the product to zero despite the oscillation.
✓Final answerThe correct option is (D) 0.
-
- CBSE 20241 markMCQQ.The value of k, for which f(x)={3x+2π3cosx+sinx,k,x=−3πx=−3π is continuous at x=−3π, is : (A) 32 (B) −32 (C) 23 (D) 6 ∼∼∼
›Reveal solutionSolution
Continuity requires k=limx→−π/3f(x). The quotient is a 00 form at x=−3π, and the limit evaluates to 32 — option (A).
For f to be continuous at x=−3π, we need
k=limx→−π/33(x+3π)3cosx+sinx.
Simplify the numerator. Writing it as a single sine:
3cosx+sinx=2(23cosx+21sinx)=2sin(x+3π).
At x=−3π this is 2sin0=0, and the denominator also vanishes — a genuine 00 form.
Evaluate the limit. Let t=x+3π, so t→0:
k=limt→03t2sint=32limt→0tsint=32⋅1=32.
✓Final answerk=32, which is option (A).
- CBSE 2026Set ANNUAL1 markQ.Prove that the function f(x) = 5x - 3 is continuous at x = -3.
›Reveal solutionSolution
A function f is continuous at x=a if x→alimf(x)=f(a); check this directly for the linear function f(x)=5x−3 at a=−3.
Concept: f is continuous at x=a when: (i) f(a) is defined, (ii) x→alimf(x) exists, and (iii) the two are equal.
Working:
f(−3)=5(−3)−3=−15−3=−18
limx→−3f(x)=limx→−3(5x−3)=5(−3)−3=−18
Since x→−3limf(x)=f(−3)=−18, all three conditions hold, so f(x)=5x−3 is continuous at x=−3. (In fact every polynomial is continuous at every real number, by the same reasoning.)
✓Final answerf(x)=5x−3 is continuous at x=−3 since limx→−3f(x)=f(−3)=−18.
- CBSE 2025Set IX1 markQ.Prove that the function f(x)=∣x∣, is continuous at x=0.
›Reveal solutionSolution
Left limit, right limit and the value all equal 0, so ∣x∣ is continuous at 0.
Concept. f is continuous at x=a iff x→a−limf(x)=x→a+limf(x)=f(a).
Here f(x)=∣x∣={−x,x,x<0x≥0
- Left-hand limit: x→0−limf(x)=x→0−lim(−x)=0.
- Right-hand limit: x→0+limf(x)=x→0+limx=0.
- Value: f(0)=∣0∣=0.
All three coincide, hence f(x)=∣x∣ is continuous at x=0.
✓Final answerf(x)=∣x∣ is continuous at x=0 because limx→0−f=limx→0+f=f(0)=0.
- CBSE 2025Set ANNUAL1 markMCQQ.The function f(x)=∣x∣−∣x+1∣ is:(a) continuous at x=0 as well as at x=−1(b) continuous at x=−1 but not at x=0(c) discontinuous at x=0 as well as at x=−1(d) continuous at x=0 but not at x=−1
›Reveal solutionSolution
∣x∣ and ∣x+1∣ are each continuous everywhere, and the difference of two continuous functions is continuous.
g(x)=∣x∣ is continuous on all of R, and h(x)=∣x+1∣ (a shifted absolute value) is also continuous on all of R. Since f(x)=g(x)−h(x) is a difference of two functions continuous everywhere, f is continuous everywhere, including at x=0 and x=−1.
✓Final answerf is continuous at both x=0 and x=−1 — option (a).
- CBSE 2025Set ANNUAL1 markQ.Check the continuity of the function f given by f(x)=2x+3 at x=1. OR Find the value of k, so that the function f(x)={kx2,3,if x≤2if x>2 is continuous at x=2.
›Reveal solutionSolution
A function is continuous at a point when its limit there equals its value; check both.
Here f(x)=2x+3 (a polynomial), and we test x=1.
Value: f(1)=2(1)+3=5.
Limit: x→1lim(2x+3)=2(1)+3=5.
Since x→1limf(x)=5=f(1), the function is continuous at x=1.
✓Final answerf is continuous at x=1 (indeed 2x+3 is continuous everywhere on R).
Alternative (Or):
Match the left value kx2 to the right value 3 at x=2.
We need f(x)={kx2,3,x≤2x>2 continuous at x=2.
Left-hand limit and value at x=2: x→2−limkx2=k(2)2=4k.
Right-hand limit: x→2+lim3=3.
Continuity requires these equal:
4k=3 ⇒ k=43.
✓Final answerk=43
- CBSE 2024Set EX1 markQ.Show that the function f(x)={x+21if x=0if x=0 is not continuous at x=0.
›Reveal solutionSolution
The limit as x→0 is 2 (from x+2), but the defined value is f(0)=1. Limit = value, so f is discontinuous at 0.
Concept. f is continuous at x=0 iff x→0limf(x)=f(0).
Limit. For x=0, f(x)=x+2, so
limx→0f(x)=limx→0(x+2)=0+2=2.
Value. By definition f(0)=1.
Since x→0limf(x)=2=1=f(0), the condition for continuity fails.
✓Final answerf is not continuous at x=0 because limx→0f(x)=2=f(0)=1.
- CBSE 2024Set ANNUAL1 markQ.Examine the continuity of the function f(x)=5x−3 at x=5.
›Reveal solutionSolution
Check that the limit at x=5 equals the function value there.
Given f(x)=5x−3.
Function value: f(5)=5(5)−3=25−3=22.
Limit: x→5limf(x)=x→5lim(5x−3)=5(5)−3=22.
Since
limx→5f(x)=22=f(5),
the function is continuous at x=5.
✓Final answerf(x)=5x−3 is continuous at x=5, as limx→5f(x)=f(5)=22.
- CBSE 2024Set ANNUAL1 markQ.When is a function f(x) said to be continuous at x=c ?
›Reveal solutionSolution
Standard definition: left-hand limit = right-hand limit = function value at that point.
A function f(x) is said to be continuous at x=c if:
limx→c−f(x)=limx→c+f(x)=f(c)
equivalently, x→climf(x) exists and is equal to f(c). If any one of these fails — the limit does not exist, or f(c) is undefined, or the limit and f(c) differ — then f is discontinuous at x=c.
✓Final answerf(x) is continuous at x=c if x→climf(x)=f(c), i.e. LHL = RHL =f(c).
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.