Oxidation of ketones involves carbon-carbon bond cleavage. Name the products formed on oxidation of 2,5-dimeth

NCERT Exemplar · Q20

Q. Oxidation of ketones involves carbon-carbon bond cleavage. Name the products formed on oxidation of 2,5-dimethylhexan-3-one.

Jharkhand JacShort· 2mImportance★★★★★

61% · 53/87 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Alcohol Oxidation

Alcohol Oxidation: The Intuition First

Imagine you have a molecule of ethanol — the alcohol in your hand sanitizer or a drink. It has a carbon atom bonded to an –OH group. Now picture that –OH group as a "handle" that can be transformed. Oxidation, in organic chemistry, doesn't always mean adding oxygen — it often means removing hydrogen from a carbon that already has a bond to oxygen. For alcohols, oxidation is like "stripping away" hydrogen atoms from the carbon that holds the –OH, turning the alcohol into a more oxidized functional group.

Think of it this way: a primary alcohol (R–CH₂–OH) has two hydrogens on the carbon with the –OH. If you remove one hydrogen and the hydrogen from the –OH, you get an aldehyde (R–CHO). Remove both hydrogens (and the –OH hydrogen), and you get a carboxylic acid (R–COOH). A secondary alcohol (R–CHOH–R') has only one hydrogen on that carbon — remove it, and you get a ketone (R–CO–R'). A tertiary alcohol has no hydrogen on that carbon — so it cannot be oxidized without breaking the carbon skeleton.

That's the core intuition: oxidation of an alcohol is about removing hydrogens from the carbon bearing the –OH group. The more hydrogens you can remove, the more oxidized the product.

The Precise Statement

Alcohol oxidation is the process in which an alcohol loses hydrogen atoms (dehydrogenation) from the carbon bonded to the -OH group, increasing the number of C-O bonds (or decreasing C-H bonds). The outcome depends on the class of the alcohol:

Alcohol Class	Structure	Product after oxidation	Reagent example
Primary (1°)	R–CH₂–OH	Aldehyde (R–CHO) then Carboxylic acid (R–COOH)	PCC (stops at aldehyde); K₂Cr₂O₇/H⁺ (goes to acid)
Secondary (2°)	R–CHOH–R'	Ketone (R–CO–R')	K₂Cr₂O₇/H⁺, CrO₃, etc.
Tertiary (3°)	R₃C–OH	No reaction (under normal conditions)	—

Watch out

A common mistake: students think "oxidation" always adds oxygen. For alcohols, it's removal of hydrogen from the carbon with the –OH. The oxygen from the –OH stays — it's the hydrogens that leave.

Why Does Tertiary Alcohol Not Oxidize?

Look at the carbon with the –OH in a tertiary alcohol: it has three carbon groups attached and no hydrogen. To form a C=O bond, you'd need to remove a hydrogen from that carbon — but there is none. The only way to oxidize a tertiary alcohol is to break a C–C bond (strong and difficult), which is not typical oxidation. So in standard organic chemistry, tertiary alcohols are inert to mild oxidizing agents.

A Real-World Analogy

Think of the alcohol carbon as a "parking spot" with a certain number of hydrogen "cars." Primary alcohol has two cars parked. Oxidation is like towing away one car (→ aldehyde) or both cars (→ carboxylic acid). Secondary alcohol has one car — tow it away, and you get a ketone. Tertiary alcohol has zero cars — nothing to tow, so no reaction.

Key Reagents to Remember (for exams)

PCC (pyridinium chlorochromate): oxidizes 1° alcohols to aldehydes only — stops there.
K₂Cr₂O₇ / H₂SO₄ (acidified potassium dichromate): oxidizes 1° alcohols all the way to carboxylic acids; 2° alcohols to ketones. (Not to be confused with Jones reagent, which is specifically CrO₃ dissolved in dilute aqueous H₂SO₄, often used in acetone — a related but distinct oxidant with the same general 1°→acid / 2°→ketone outcome.) …

Why this formula?

Alcohol Oxidation: Why the Reactions Work the Way They Do

Alcohol oxidation is a fundamental reaction in organic chemistry, and understanding why it proceeds as it does is crucial for Indian board exams (Class 12, JEE, NEET). Let's break it down step-by-step.

1. The Core Idea: Loss of Hydrogen

Oxidation in organic chemistry means loss of hydrogen (or gain of oxygen). For alcohols, this happens at the carbon bearing the –OH group.

Primary alcohol ( $R-CH_2OH$ ): Has two hydrogens on the carbon attached to –OH.
Secondary alcohol ( $R_2CHOH$ ): Has one hydrogen on that carbon.
Tertiary alcohol ( $R_3COH$ ): Has zero hydrogens on that carbon.

Key insight: The number of hydrogens on the carbon with –OH determines if and how far oxidation can go.

2. Why Primary Alcohols Give Aldehydes (Then Carboxylic Acids)

Step 1: Aldehyde formation

When a primary alcohol ( $R-CH_2OH$ ) is oxidized, the first product is an aldehyde ( $R-CHO$ ).

Why? The oxidizing agent (like $K_2Cr_2O_7$ / $H_2SO_4$ or $PCC$ ) removes two hydrogens:

One from the –OH group
One from the carbon atom

The carbon–oxygen bond becomes a double bond ( $C=O$ ), forming the aldehyde.

R-CH_2OH \xrightarrow{[O]} R-CHO + H_2O

But why stop here? The aldehyde still has one hydrogen on the carbonyl carbon. If a strong oxidant is present, it can remove that hydrogen too.

Step 2: Carboxylic acid formation

With excess strong oxidant (e.g., $K_2Cr_2O_7$ / $H_2SO_4$ , heat), the aldehyde is further oxidized to a carboxylic acid ( $R-COOH$ ).

R-CHO \xrightarrow{[O]} R-COOH

Why does this happen? The aldehyde's carbonyl carbon is electrophilic (partially positive). Water (from the reaction medium) adds to it, forming a gem-diol intermediate. The oxidant then removes two more hydrogens, giving the acid.

Exam tip: To stop at the aldehyde, use a mild oxidant like PCC (pyridinium chlorochromate) in anhydrous conditions — no water means no gem-diol formation.

3. Why Secondary Alcohols Give Ketones (and Stop)

A secondary alcohol ( $R_2CHOH$ ) has only one hydrogen on the carbon with –OH. Oxidation removes:

One hydrogen from –OH
One hydrogen from the carbon

This forms a ketone ( $R_2C=O$ ).

R_2CHOH \xrightarrow{[O]} R_2C=O + H_2O

Why does it stop here? The ketone has no hydrogen on the carbonyl carbon. Without that hydrogen, further oxidation (under normal conditions) is impossible — you'd need to break a $C-C$ bond, which requires much harsher conditions.

Key result: Secondary alcohols cannot be oxidized further than ketones under standard conditions.

4. Why Tertiary Alcohols Do NOT Oxidize

A tertiary alcohol ( $R_3COH$ ) has zero hydrogens on the carbon bearing –OH.

What happens if you try? The oxidant cannot remove any hydrogen from that carbon. The only possible reaction would be breaking a $C-C$ bond, which doesn't happen under normal oxidation conditions.

Result: Tertiary alcohols are resistant to oxidation under mild to moderate conditions. They require strong heating with powerful oxidants (like $K_2Cr_2O_7$ / $H_2SO_4$ , heat) to break carbon–carbon bonds — this is destructive oxidation, not useful for synthesis.

5. The "Why" in One Table

Alcohol Type	Hydrogens on C–OH	Product	Why?
Primary ( $1^\circ$ )	2	Aldehyde → Carboxylic acid	Two hydrogens available; aldehyde still has one more

Start your 14-day free trial to unlock the full solution →

Oxidative cleavage of the C-C bonds next to the carbonyl of 2,5-dimethylhexan-3-one gives two carboxylic acids: 2-methylpropanoic acid (isobutyric acid) and 3-methylbutanoic acid (isovaleric acid).

The structure

2,5-Dimethylhexan-3-one (carbonyl at C3, methyls at C2 and C5):

(CH_3)_2CH\text{-}CO\text{-}CH_2\text{-}CH(CH_3)_2

so the carbonyl group is flanked by an isopropyl group on one side and an isobutyl group on the other.

Oxidation

A ketone has no H on the carbonyl carbon, so it can only be oxidised by breaking the C-C bonds on either side of $>C=O$ ; each attached group is converted to a $-COOH$ group ( $R\text{-}CO\text{-}R' \rightarrow R\text{-}COOH + R'\text{-}COOH$ ): …

Start your 14-day free trial to unlock the full solution →

Method: Haloform Reaction (for Methyl Ketones) — Not applicable here

2,5-dimethylhexan-3-one is not a methyl ketone. It has the carbonyl group at position 3, not adjacent to a methyl group. So the haloform reaction does not apply.

Instead, the oxidation of non-methyl ketones under strong conditions (like hot KMnO₄ or acidic K₂Cr₂O₇) proceeds via carbon-carbon bond cleavage on both sides of the carbonyl.

Method: Oxidative Cleavage of Ketones (Baeyer-Villiger is different — this is strong oxidation)

Concept

Under vigorous oxidation (hot, concentrated KMnO₄/H⁺ or K₂Cr₂O₇/H₂SO₄), ketones undergo C–C bond breaking next to the carbonyl. The carbonyl carbon becomes a carboxylic acid (or CO₂ if it's a terminal group), and the alkyl fragments become carboxylic acids or ketones depending on structure.

Steps

Step 1: Identify the structure

2,5-dimethylhexan-3-one:

CH₃ – CH(CH₃) – CH₂ – CO – CH₂ – CH(CH₃) – CH₃

Numbering:

C1: CH₃
C2: CH(CH₃)
C3: C=O
C4: CH₂
C5: CH(CH₃)
C6: CH₃

Step 2: Cleave both C–C bonds adjacent to the carbonyl

Left side (C2–C3 bond): The fragment from C1–C2 becomes a carboxylic acid. C1–C2 = CH₃–CH(CH₃)– → 2-methylpropanoic acid (isobutyric acid) …

Start your 14-day free trial to unlock the full solution →

Here are the common mistakes students make when tackling the oxidation of 2,5-dimethylhexan-3-one, along with the correct reasoning and how to avoid each.

1. Forgetting that Ketones Resist Normal Oxidation

The Mistake:

Students try to apply the same logic as for alcohols or aldehydes (e.g., using $\ce{K2Cr2O7/H2SO4}$ or $\ce{KMnO4}$ ) and assume the ketone will simply oxidize to a carboxylic acid at the carbonyl carbon.

Why it’s wrong:

Ketones do not undergo oxidation under mild conditions because the carbonyl carbon has no hydrogen atom to lose. Normal oxidation (e.g., with chromic acid) stops at the ketone stage.

How to avoid:

Remember the rule: Only aldehydes (and primary/secondary alcohols) are easily oxidized.
Ketones require harsh conditions (hot, concentrated $\ce{KMnO4}$ or $\ce{HNO3}$ ) that break the carbon–carbon bond next to the carbonyl.

2. Misidentifying the Cleavage Site

The Mistake:

Students think the carbonyl carbon itself is attacked, leading to products like 2,5-dimethylhexanoic acid or a single carboxylic acid.

Why it’s wrong:

Oxidation of ketones involves cleavage of the C–C bond on either side of the carbonyl group. The carbonyl carbon becomes part of a carboxylic acid, and the two alkyl groups become separate acids (or $\ce{CO2}$ if one is a methyl group).

How to avoid:

Draw the ketone structure: $\ce{CH3-CH(CH3)-CH2-CO-CH2-CH(CH3)-CH3}$
Identify the two alkyl groups attached to the carbonyl:
- Left side: isobutyl ( $\ce{-CH2-CH(CH3)-CH3}$ )
- Right side: isobutyl (same)
Each alkyl group becomes a carboxylic acid after cleavage.

3. Forgetting to Account for Symmetry

The Mistake:

Students list two different products (e.g., one acid from the left, another from the right) when the molecule is symmetric.

Why it’s wrong:

Here, both sides are identical isobutyl groups. Cleavage yields two molecules of the same carboxylic acid.

How to avoid:

Check if the ketone is symmetrical (R–CO–R). If yes, the product is a single carboxylic acid (or two identical molecules).
For 2,5-dimethylhexan-3-one, the product is isobutyric acid (2-methylpropanoic acid).

4. Incorrect Naming of the Product

The Mistake:

Students name the product as “2-methylpropanoic acid” but forget to mention it forms two molecules, or they use the wrong IUPAC name.

Why it’s wrong:

The correct IUPAC name is 2-methylpropanoic acid (common name: isobutyric acid). Writing “butanoic acid” or “2,2-dimethylpropanoic acid” is incorrect.

How to avoid: …

Start your 14-day free trial to unlock the full solution →

←Previous questionQ19 — Name the electrophile produced in the reaction of benzene with benzoyl…→Next questionQ21 — Arrange the following in decreasing order of their acidic strength and…

Q.Oxidation of ketones involves carbon-carbon bond cleavage. Name the products formed on oxidation of 2,5-dimethylhexan-3-one.

The structure

Oxidation

🎓Unlock everything free for 14 days

Unlock everything free for 14 days