Q.A man of height 2 metres walks at a uniform speed of 5 km/h away from a lamp post which is 6 metres high. Find the rate at which the length of his shadow increases.
Concept understanding — Related Rates
Related Rates
The idea: quantities that change together
Many real situations involve two or more quantities that all vary with time, linked by a fixed relationship. Inflate a balloon and its radius and volume both grow; slide a ladder down a wall and the top's height and the foot's distance both change. A related-rates problem gives you the rate at which one quantity is changing and asks for the rate of another, at some instant.
The key insight: if the quantities are tied together by an equation, then their rates are tied together too. We uncover that link by differentiating the equation with respect to time t.
The core mechanism: differentiate with respect to time
Every variable is a function of t, so differentiating brings in the chain rule — each variable's derivative picks up a factor of its own rate. For example, if the volume of a sphere is V=34πr3, then differentiating both sides with respect to t gives
dtdV=4πr2dtdr.
This single equation connects the rate the volume grows, dtdV, to the rate the radius grows, dtdr. Knowing one (and the current r) gives the other.
The standard procedure
Solving a related-rates problem
- Identify the quantities that change with time and the rate you want.
- Write an equation relating those quantities (geometry, a formula, etc.).
- Differentiate both sides with respect to t, treating every variable as a function of t.
- Substitute the known values and the known rate at the given instant.
- Solve for the unknown rate.
Worked example
Air is pumped into a spherical balloon at dtdV=100 cm3/s. How fast is the radius increasing when r=5 cm?
From dtdV=4πr2dtdr, substitute dtdV=100 and r=5:
100=4π(5)2dtdr=100πdtdr⟹dtdr=π1 cm/s.
Substitute the numerical values after differentiating, never before. If you plug r=5 into the volume formula first, r becomes a constant and its rate dtdr vanishes from the equation.
The everyday cases are the sphere/circle (V,A vs. r), the sliding ladder (x2+y2=ℓ2), and the filling cone. In each you differentiate the relation in t and solve for the missing rate.
Related rates problems are a named application within the NCERT Class 12 Application of Derivatives chapter, and classic setups like the growing balloon or the sliding ladder are staples of CBSE board and JEE Main 'rate of change' questions. Students searching 'related rates problems class 12 examples' or 'rate of change of volume and radius' will find this differentiate-then-substitute method is exactly the five-step procedure boards expect to see written out.
The key idea is Related Rates: use similar triangles to relate the variables, then differentiate with respect to time.
Step 1 – Set up the geometry.
Let the distance from the lamp post to the man be l (in km), and the length of his shadow be s (in km). The lamp post is 6 m tall, the man is 2 m tall. From the similar triangles △MSN∼△ASB:
s2=l+s6
Step 2 – Solve for the relation.
Cross-multiplying: 2(l+s)=6s⟹2l+2s=6s⟹2l=4s⟹l=2s.
Step 3 – Differentiate with respect to time.
The man walks at 5 km/h, so dtdl=5 km/h. Differentiating l=2s:
dtdl=2dtds⟹5=2dtds⟹dtds=25=2.5 km/h
The length of his shadow increases at 2.5 km/h.
Using similar triangles, the shadow length s and the man’s distance l from the lamp post are related by l=2s. Differentiating with respect to time gives dtdl=2dtds, so dtds=21⋅5=2.5 km/h. The shadow length increases at 2.5 km/h.
This is a classic related rates problem. The core idea: two quantities (the man’s distance from the lamp post and the length of his shadow) change together because they are linked by geometry. When you know how fast one changes, you can find how fast the other changes — by differentiating the geometric relationship.
The geometry here is driven by light travelling in straight lines. The lamp at the top of the post casts a ray that just grazes the man’s head and hits the ground at the tip of his shadow. That ray, the lamp post, and the ground form a large right triangle. The man’s body and his shadow form a smaller, similar right triangle inside it. Similar triangles give a clean linear relation — no squares, no trig — which makes the differentiation trivial.
Let’s set it up step by step.
-
Draw and label the figure.
Let A be the foot of the lamp post, B the lamp (so AB=6 m). Let M be the man’s feet, N his head (so MN=2 m). The point S is the tip of his shadow on the ground.
The distance from the lamp post to the man is AM=l. The shadow length is MS=s.
The ray from B through N hits the ground at S, so N lies on BS.
-
Write the similarity relation.
Triangles △ASB and △MSN share the angle at S and both have a right angle (at A and M respectively). So they are similar:
MNAB=MSAS
Here AS=AM+MS=l+s, and MS=s. Substituting:
26=sl+s
which simplifies to
3=sl+s.
- Solve for the relation between l and s. Multiply through:
3s=l+s⇒l=2s.
This is the key geometric link: the man’s distance from the post is always twice his shadow length.
The relation l=2s is independent of the actual numbers — it comes from the ratio of heights (6:2 = 3:1). If the lamp were 8 m and the man 2 m, you’d get l=3s. Always derive it fresh from the similar triangles.
- Differentiate with respect to time. Both l and s change as the man walks. Differentiate l=2s implicitly:
dtdl=2dtds.
The man walks away at a uniform speed of 5 km/h, so dtdl=5 km/h (positive because l increases).
- Solve for dtds.
5=2dtds⇒dtds=25=2.5 km/h.
A common mistake is to think the shadow length increases at the same rate as the man’s speed. But the geometry shows the shadow grows at half that rate — because the man’s own height “shields” part of the ray. Always check the factor from similar triangles.
The units are consistent: km/h for speed, so the answer is in km/h. If the problem had asked in m/s, you’d convert: 2.5 km/h =36002500≈0.694 m/s — but the given speed is in km/h, so the answer stays in km/h.
The length of his shadow increases at 2.5 km/h.
Method: Related Rates via Similar Triangles
The general technique for shadow/light-source problems, and any setup where similar right triangles link two changing lengths.
Steps
Step 1: Draw the two right triangles and identify what's similar
A light source at a fixed height, an object of fixed height, and the ground form a large triangle (source to the tip of the shadow) containing a smaller, similar triangle (the object to that same shadow tip). Similar triangles arise because both triangles share the angle at the shadow tip and both have a right angle at the ground.
Step 2: Write the similarity ratio and simplify to a linear relation
Set the ratio of corresponding sides of the two triangles equal, then simplify algebraically. For this family of problems it reduces to a simple proportional relation between the object's distance from the light source and the shadow's own length — always re-derive this ratio from the actual heights given, since it changes with the numbers.
Step 3: Differentiate the linear relation with respect to time
Because the relation between the two lengths is linear (not quadratic), differentiating it with respect to t is immediate and introduces no product rule — each side's derivative is just a constant multiple of the other's rate.
Step 4: Substitute the known rate and solve
Substitute the given constant walking speed for the known rate, then solve for the unknown rate. Check the ratio makes physical sense: is the unknown quantity expected to grow faster or slower than the known one, given the relative heights involved?
Common Mistakes
Mistake 1: Assuming the shadow lengthens at the same speed as the man walks
Why it's wrong: it's tempting to think the shadow's tip moves at 5 km/h simply because the man does, but the shadow length and the man's distance from the lamp post are two different quantities related by similar triangles, not identical to each other. Correct approach: derive the actual proportional relationship (l=2s here) from the similar triangles first, and only then differentiate — the shadow turns out to grow at exactly half the man's walking speed in this setup.
Mistake 2: Confusing the "distance from the lamp post" with the "distance to the shadow tip"
Why it's wrong: the similarity ratio in this type of problem compares the whole distance from the light source to the shadow tip (post-to-man plus man-to-shadow-tip) against the man's height — using only the post-to-man distance in that ratio gives the wrong proportion entirely. Correct approach: carefully label the figure so that AS=AM+MS is recognized as the full base of the large triangle, not just the segment from the post to the man.
Showing the 12 most recent of 17 on this concept.
- COMEDK 2025Set 2025-E1 markMCQQ.A man is moving away from a tower 41.6 m high at a rate of 2 m/s. If the eyelevel of the man is 1.6 m above the ground, then the rate at which the angle of elevation of the top of the tower changes, when he is at a distance of 30 m from the foot of the tower is : (A) −1254rad/sec (B) 6254rad/sec (C) −1252rad/sec (D) 6251rad/sec
›Reveal solutionSolution
The angle of elevation decreases as the man moves away; using related rates and the tangent function, the rate is found to be −1254 rad/s, so the correct option is (A).
We have a tower of height 41.6 m, and the man’s eye level is 1.6 m above ground. So the effective height of the tower above the man’s eye level is 41.6−1.6=40 m. The man moves away from the tower at 2 m/s. We need the rate of change of the angle of elevation θ when his horizontal distance from the foot is 30 m.
Concept and intuition:
The angle of elevation θ satisfies tanθ=adjacentopposite=x40, where x is the horizontal distance from the man to the tower. As x increases, θ decreases, so we expect a negative rate. Differentiating with respect to time gives a relation between dtdθ and dtdx. This is a classic related-rates problem: we know dtdx=2 m/s, and we want dtdθ at x=30.
Step-by-step solution:
- Set up the relationship. Let x be the distance from the man to the foot of the tower. The effective height above eye level is H=40 m. Then
tanθ=x40.
- Differentiate implicitly with respect to time t. Using the chain rule:
sec2θ⋅dtdθ=−x240⋅dtdx.
Here dtdx=2 m/s (positive because distance increases).
- Find sec2θ at the given instant. When x=30 m,
tanθ=3040=34.
Recall sec2θ=1+tan2θ=1+(34)2=1+916=925.
- Substitute into the differentiated equation.
925⋅dtdθ=−(30)240⋅2.
Compute the right side:
−90040⋅2=−90080=−908=−454.
- Solve for dtdθ.
dtdθ=−454⋅259=−112536=−1254.
The negative sign confirms the angle is decreasing.
Watch outA common mistake is forgetting to subtract the man’s eye level from the tower height, or using the full 41.6 m directly. Always check the vertical difference from eye level to the top.
TipNotice that 1254=0.032 rad/s — a small rate, which makes sense because the angle changes slowly when the man is far away.
✓Final answerThe correct option is (A).
ANSWER: A
- COMEDK 2024Set 2024-M1 markMCQQ.For a given curve y=2x−x2, when x increases at the rate of 3 units/sec, then how does the slope of the curve change? (A) Decreasing at 3 units/sec (B) Increasing at 3 units/sec (C) Decreasing at 6 units/sec (D) Increasing at 6 units/sec
›Reveal solutionSolution
The slope of the curve is given by the derivative dxdy=2−2x, and its rate of change with respect to time is dtd(slope)=−2⋅dtdx. With dtdx=3 units/sec, the slope decreases at 6 units/sec, so the answer is (C).
The key idea is that we are not asked for the slope itself, but for how fast the slope changes over time. That means we need the time derivative of the slope, using the chain rule, because the slope depends on x, and x itself changes with time.
Concept & Intuition:
Imagine a point moving along the parabola y=2x−x2. As x increases steadily (3 units every second), the slope of the tangent line at the moving point changes. The slope is m=2−2x, a linear function of x. If x increases, m decreases because of the −2x term. The question is: how fast does m decrease? That’s just the derivative of m with respect to time: dtdm=dxdm⋅dtdx.
Step-by-step solution:
- Find the slope of the curve as a function of x. The slope at any point is the derivative dxdy:
y=2x−x2⇒dxdy=2−2x.
So the slope m(x)=2−2x.
- We need the rate of change of the slope with respect to time. That is dtdm. Since m depends on x, and x depends on t, use the chain rule:
dtdm=dxdm⋅dtdx.
- Compute dxdm. From m=2−2x, differentiate with respect to x:
dxdm=−2.
This is constant — the slope of the curve changes linearly with x, so its rate of change per unit x is always −2.
- Use the given dtdx. The problem states x increases at 3 units/sec, so
dtdx=3.
- Multiply to find dtdm:
dtdm=(−2)⋅3=−6.
The negative sign means the slope is decreasing at a rate of 6 units per second.
TipA common mistake is to confuse the slope itself with its rate of change. The slope at a given x is 2−2x, but the rate at which that slope changes over time is constant (−6 here) because dxdm is constant and dtdx is constant. So the slope decreases uniformly.
Watch outDo not plug a specific x value into 2−2x and then differentiate that number — that gives zero. The slope changes because x moves; you must use the chain rule.
✓Final answerThe correct option is (C).
ANSWER: C
- COMEDK 2025Set 2025-M1 markMCQQ.Oil from a conical funnel is dripping at the rate of 5 cm3/s. If the radius and height of the funnel are 10 cm and 20 cm respectively, then the rate at which the oil level drops when it is 5 cm from the top is (A) 45π8 cm/s (B) −452π cm/s (C) −454π cm/s (D) −45π4 cm/s
›Reveal solutionSolution
The rate at which the oil level drops is found by relating the volume of a cone to its height using similar triangles, then differentiating with respect to time. The answer is −45π4 cm/s, which corresponds to option (D).
Concept & Intuition
This is a classic related rates problem. Oil is draining from a conical funnel, so the volume is decreasing at a known rate (dV/dt=−5 cm³/s). We want the rate at which the height of the oil changes (dh/dt) when the oil is at a particular depth. The key twist: as the oil level drops, the radius of the oil's surface also shrinks, because the funnel is conical. The radius and height of the oil are not independent — they are linked by the geometry of the cone (similar triangles). So we first express volume purely in terms of height, then differentiate.
Step-by-step solution
- Set up the geometry. The funnel is a right circular cone with radius R=10 cm and height H=20 cm. At any moment, the oil forms a smaller cone of height h (measured from the tip) and radius r. By similar triangles:
hr=HR=2010=21
So r=2h.
- Write the volume of oil in terms of h. Volume of a cone: V=31πr2h. Substitute r=h/2:
V=31π(2h)2h=31π⋅4h2⋅h=12πh3
- Differentiate with respect to time t. Using the chain rule:
dtdV=12π⋅3h2⋅dtdh=4πh2dtdh
- Plug in known values. We are told the oil is dripping out at 5 cm³/s, so dV/dt=−5 (negative because volume is decreasing). The oil is 5 cm from the top of the funnel. Since the funnel is 20 cm tall, the oil height from the tip is h=20−5=15 cm. Substitute:
−5=4π(15)2dtdh
−5=4π⋅225⋅dtdh
−5=4225πdtdh
- Solve for dh/dt.
dtdh=−5⋅225π4=−225π20=−45π4
The negative sign confirms the oil level is dropping.
Watch outA common mistake is to use the full funnel's radius and height directly in the volume formula, forgetting that the oil's radius changes with height. Always use similar triangles to relate r and h for the current oil cone.
TipNotice that the rate dh/dt is not constant — it depends on h. That’s why we needed the specific height (15 cm) to get a numerical answer.
✓Final answerThe correct option is (D).
ANSWER: D
- COMEDK 2023Set 2023-E1 markMCQQ.The altitude of a cone is 20 cm and its semi vertical angle is 30∘. If the semi vertical angle is increasing at the rate of 20 per second, then the radius of the base is increasing at the rate of (A) 160 cm/sec (B) 10 cm/sec (C) 3160 cm/sec (D) 30 cm/sec
›Reveal solutionSolution
(Note on units: the paper quotes the angular rate as '2 degrees per second' but the options are only consistent with treating that rate as 2 in the same angular unit used for the derivative - i.e. the option set is built on dr/dt = h sec^2 a * 2 = 160/3. Converting 2 degrees to radians would give 20*(4/3)*(pi/90) ~ 0.93 cm/s, which matches none of the four options. The intended and only available answer is 160/3 cm/sec.)
Concept: related rates on a cone. With altitude h fixed and semi-vertical angle alpha varying, r = h tan alpha, so dr/dt = h sec^2(alpha) * d(alpha)/dt.
Given h = 20 cm, alpha = 30 degrees, d(alpha)/dt = 2 per second.
sec^2(30) = 1/cos^2(30) = 1/(3/4) = 4/3.
dr/dt = 20 * (4/3) * 2 = 160/3 cm/sec.
(Note on units: the paper quotes the angular rate as '2 degrees per second' but the options are only consistent with treating that rate as 2 in the same angular unit used for the derivative - i.e. the option set is built on dr/dt = h sec^2 a * 2 = 160/3. Converting 2 degrees to radians would give 20*(4/3)*(pi/90) ~ 0.93 cm/s, which matches none of the four options. The intended and only available answer is 160/3 cm/sec.)
✓Final answerThe correct option is (C) — 3160 cm/sec
ANSWER: C
- COMEDK 2026Set 2026-M1 markMCQQ.A square plate is contracting at a uniform rate of 2 cm2/min. The rate at which the perimeter is decreasing when the side of the square is 16 cm is: (A) 81 cm/min (B) 41 cm/min (C) 16 cm/min (D) 32 cm/min
›Reveal solutionSolution
The area decreases at a constant rate; we relate the side length to area, differentiate with respect to time, and then find the perimeter’s rate of change. The perimeter decreases at 41 cm/min when the side is 16 cm.
We have a square plate whose area is shrinking at a steady rate of 2 cm2/min. The question asks: at the moment the side length is 16 cm, how fast is the perimeter decreasing?
The key idea is related rates: we connect the changing area to the changing side length, then connect the side length to the perimeter. Because the contraction is uniform, the side length shrinks at a rate that depends on the current side length.
- Define variables and given rate Let s be the side length (in cm) and A the area (in cm²). For a square:
A=s2
We are told:
dtdA=−2(negative because area is decreasing)
- Relate the rates of area and side Differentiate A=s2 with respect to time t:
dtdA=2s⋅dtds
Substitute the known rate:
−2=2s⋅dtds
Solve for dtds:
dtds=−s1
At the instant s=16 cm:
dtds=−161 cm/min
The negative sign confirms the side length is decreasing.
- Find the perimeter’s rate of change Perimeter P=4s. Differentiate:
dtdP=4⋅dtds
Plug in dtds=−161:
dtdP=4×(−161)=−41 cm/min
The negative sign means the perimeter is decreasing. The question asks for the rate at which it is decreasing, so we take the magnitude: 41 cm/min.
Watch outA common mistake is to forget that dtds depends on s — it is not constant. If you incorrectly assume dtds is constant, you might get a wrong answer like 16 or 32 cm/min.
TipNotice that dtds=−s1 means the side shrinks faster when the square is smaller — intuitive, because a fixed area loss is a larger fraction of a small square.
✓Final answerThe correct option is (B).
ANSWER: B
- COMEDK 2025Set 2025-E1 markMCQQ.If the length of the diagonal of a square is increasing at the rate of 0.1 cm/sec. What is the rate of increase of its area when the side is 215 cm ? (A) 3 cm2/sec (B) 0.15 cm2/sec (C) 1.5 cm2/sec (D) 32 cm2/sec
›Reveal solutionSolution
The key idea is to relate the side length and diagonal of a square, then use the chain rule to connect the rates of change of the diagonal and the area. The area increases at 1.5cm2/sec when the side is 215 cm, so the correct option is (C).
We are told the diagonal of a square is increasing at a constant rate of 0.1cm/s. We need the rate of increase of the area when the side length is 215cm. The natural approach is to express the area in terms of the diagonal, then differentiate with respect to time.
Concept and intuition:
For a square, the diagonal d and side s are related by d=s2. The area A=s2. If we know how fast d changes, we can find how fast s changes, and then how fast A changes. Alternatively, we can directly relate A to d: since s=d/2, then A=(d/2)2=d2/2. Differentiating this gives dA/dt=d⋅(dd/dt). This is simpler because we don't need to find ds/dt separately.
Let's work through step by step.
- Relate area to diagonal. For a square with side s, diagonal d=s2 and area A=s2. Substituting s=d/2 gives:
A=(2d)2=2d2.
- Differentiate with respect to time. Using the chain rule:
dtdA=dtd(2d2)=21⋅2d⋅dtdd=d⋅dtdd.
We are given dtdd=0.1cm/s.
- Find the diagonal when the side is 215 cm. Since d=s2,
d=215⋅2=15cm.
- Plug into the rate equation.
dtdA=15×0.1=1.5cm2/sec.
TipNotice we never needed to compute ds/dt explicitly. By expressing area directly in terms of the diagonal, we saved a step and reduced the chance of algebraic error.
Watch outA common mistake is to forget that the diagonal and side are not independent — students sometimes try to differentiate A=s2 without first relating s to d, leading to confusion about which rate is given.
Thus, the rate of increase of the area is 1.5cm2/sec.
✓Final answerThe correct option is (C).
ANSWER: C
- COMEDK 2026Set 2026-A1 markMCQQ.An open hemispherical storage tank has radius 13 m . Oil flows into the tank such that the depth ' h ' of oil in the tank changes at the rate of 3 m/hr. When the depth h=1 m, the rate of change of the area of the top surface of the oil is (A) 72π m2/hr (B) 75π m2/hr (C) 24π m2/hr (D) 26π m2/hr
›Reveal solutionSolution
The oil surface is a circle of radius r with r2=2Rh−h2 for a bowl of radius R. So area A=π(2Rh−h2) and dtdA=π(2R−2h)dtdh. At R=13, h=1, dtdh=3 this is 72π m2/hr — option (A).
Concept & Intuition
In a hemispherical bowl of radius R, the free surface at oil depth h (measured from the lowest point) is a horizontal circle. Its radius r comes from the sphere geometry: the surface is a distance R−h from the centre, so r2=R2−(R−h)2=2Rh−h2. Differentiate the surface area with respect to time and use the given dtdh.
Step-by-step solution
- Radius of the top circle at depth h:
r2=R2−(R−h)2=2Rh−h2.
- Area of the top surface:
A=πr2=π(2Rh−h2).
- Differentiate with respect to time:
dtdA=π(2R−2h)dtdh.
- Substitute R=13, h=1, dtdh=3:
dtdA=π(2⋅13−2⋅1)(3)=π(26−2)(3)=π(24)(3)=72π.
✓Final answerdtdA=72π m2/hr — option (A).
ANSWER: A
- COMEDK 2026Set 2026-M1 markMCQQ.If 3 cm/s is the rate at which the side of an equilateral triangle increases, then the rate of change of area, when the side is 12 cm is: (A) 93 cm2/s (B) 18 cm2/s (C) 63 cm2/s (D) 183 cm2/s
›Reveal solutionSolution
The area of an equilateral triangle depends on its side length; by differentiating the area formula with respect to time, we find the rate of change of area when the side is 12 cm is 183cm2/s, which corresponds to option (D).
We are told the side length s of an equilateral triangle increases at a constant rate: dtds=3 cm/s. We need the rate of change of the area A when s=12 cm. The key idea is to relate A to s using geometry, then differentiate with respect to time t using the chain rule — this turns a static formula into a dynamic relationship.
- Area of an equilateral triangle in terms of its side For an equilateral triangle of side s, the height is 23s (by splitting it into two 30-60-90 right triangles). The area is
A=21⋅base⋅height=21⋅s⋅23s=43s2.
- Differentiate with respect to time Both A and s are functions of time t. Using the chain rule:
dtdA=dtd(43s2)=43⋅2s⋅dtds=23s⋅dtds.
- Substitute the given values We have dtds=3 cm/s and s=12 cm at the moment of interest.
dtdA=23⋅12⋅3=23⋅36=183cm2/s.
TipNotice that the factor 23s is exactly the height of the triangle. So the rate of change of area is simply (height) × (rate of change of side). This geometric shortcut can save time in similar problems.
Watch outA common mistake is forgetting the factor 43 or misapplying the chain rule — for example, writing dtdA=23s without multiplying by dtds. Always check that you’ve differentiated with respect to t, not s.
✓Final answerThe correct option is (D).
ANSWER: D
- COMEDK 2025Set 2025-A1 markMCQQ.x=a(θ+sinθ) and y=a(1−cosθ) represents the equation of a curve. If θ changes at a constant rate k then the rate of change of the slope of the tangent to the curve at θ=3π is (A) 2k (B) 3k (C) 32k (D) 32k
›Reveal solutionSolution
The problem asks for the rate of change of the slope of the tangent, not the slope itself. We find dxdy in terms of θ, then differentiate with respect to time using the chain rule, using dtdθ=k. At θ=3π, the result simplifies to 32k, so the correct option is (D).
We are given a cycloid-like parametric curve:
x=a(θ+sinθ), y=a(1−cosθ), with θ increasing at constant rate k, i.e. dtdθ=k.
The slope of the tangent is dxdy. But the question asks for the rate of change of that slope with respect to time — that is dtd(dxdy). This is a classic related-rates problem in parametric form.
1. Find the slope in terms of θ
First compute derivatives with respect to θ:
dθdx=a(1+cosθ),dθdy=asinθ
Then the slope is:
dxdy=dx/dθdy/dθ=a(1+cosθ)asinθ=1+cosθsinθ
Using the identity sinθ=2sin(θ/2)cos(θ/2) and 1+cosθ=2cos2(θ/2), this simplifies to:
dxdy=2cos2(θ/2)2sin(θ/2)cos(θ/2)=tan2θ
So the slope at any θ is simply tan(θ/2).
2. Differentiate the slope with respect to time
We want dtd(dxdy)=dtd(tan2θ).
By the chain rule:
dtd(tan2θ)=sec2(2θ)⋅21⋅dtdθ
Given dtdθ=k, we have:
dtd(dxdy)=2ksec2(2θ)
3. Evaluate at θ=3π
Here 2θ=6π. We know sec(π/6)=32, so sec2(π/6)=34.
Thus:
dtd(dxdy)θ=π/3=2k⋅34=32k
Watch outA common mistake is to compute the slope itself at θ=π/3 (which is tan(π/6)=1/3) and then multiply by k, forgetting the extra factor from the chain rule on tan(θ/2). Always differentiate the slope expression fully.
TipThe simplification 1+cosθsinθ=tan2θ is a neat trigonometric shortcut that makes differentiation much cleaner.
✓Final answerThe correct option is (D).
ANSWER: D
- COMEDK 2023Set 2023-E1 markMCQQ.If the volume of a sphere is increasing at a constant rate, then the rate at which its radius is increasing is (A) inversely proportional to its surface area (B) proportional to the radius (C) a constant (D) inversely proportional to the radius
›Reveal solutionSolution
i.e. the rate of increase of the radius is inversely proportional to the surface area (equivalently, inversely proportional to r^2 - NOT simply inversely proportional to r, so (D) is wrong).
Concept: related rates for a sphere.
V = (4/3) pi r^3
dV/dt = 4 pi r^2 * dr/dt
Given dV/dt = k (a constant), so
dr/dt = k / (4 pi r^2).
But 4 pi r^2 is exactly the surface area S of the sphere. Therefore
dr/dt = k / S,
i.e. the rate of increase of the radius is inversely proportional to the surface area (equivalently, inversely proportional to r^2 - NOT simply inversely proportional to r, so (D) is wrong).
✓Final answerThe correct option is (A) — inversely proportional to its surface area
ANSWER: A
- COMEDK 2024Set 2024-E1 markMCQQ.The side of a cube is equal to the diameter of a sphere. If the side and radius increase at the same rate then the ratio of the increase of their surface area is (A) 3:π (B) π:6 (C) 2π:3 (D) 3:2π
›Reveal solutionSolution
The problem asks for the ratio of the rates of increase of surface areas of a cube and a sphere when their side and radius increase at the same rate, given the side equals the sphere’s diameter. The answer is 3:π, which corresponds to option (A).
We start by understanding the relationship: the cube’s side length s equals the sphere’s diameter, so s=2r, where r is the sphere’s radius. Both s and r increase at the same rate, meaning dtds=dtdr. We want the ratio of the rates of change of their surface areas.
Concept and intuition:
Surface area growth depends on both the current size and the rate of change of the linear dimension. Since the cube and sphere have different formulas for surface area, their rates of change will differ even when their linear dimensions grow at the same speed. The key is to differentiate each surface area with respect to time, then substitute the given relationship s=2r and the equal rate condition.
-
Write the surface area formulas.
- Cube surface area: Acube=6s2
- Sphere surface area: Asphere=4πr2
-
Differentiate both with respect to time t.
- dtdAcube=12s⋅dtds
- dtdAsphere=8πr⋅dtdr
-
Apply the given conditions.
- The side equals the diameter: s=2r.
- The rates are equal: dtds=dtdr. Substitute s=2r into the cube’s rate:
dtdAcube=12(2r)⋅dtdr=24r⋅dtdr
- Form the ratio of the rates.
dtdAspheredtdAcube=8πr⋅dtdr24r⋅dtdr=8π24=π3
So the ratio (cube : sphere) is 3:π.
TipA common mistake is to forget that the cube’s side equals the diameter, not the radius. Using s=r instead of s=2r would give a different ratio π:6, which is option (B) — a tempting distractor.
✓Final answerThe correct option is (A).
ANSWER: A
-
- COMEDK 2025Set 2025-M1 markMCQQ.A spherical snowball is melting such that its volume is decreasing at the rate of 1 cm3/min. The rate at which the diameter is decreasing when the diameter is 10 cm is (A) 75π11 cm/min (B) 50π1 cm/min (C) 75π2 cm/min (D) 25π1 cm/min
›Reveal solutionSolution
We relate the rate of change of volume to the rate of change of diameter using the formula for the volume of a sphere and implicit differentiation. The diameter decreases at 50π1 cm/min when the diameter is 10 cm, so the correct option is (B).
Concept and intuition:
This is a classic related rates problem. The snowball’s volume shrinks at a known constant rate, and we want how fast its diameter shrinks at a particular instant. The key is to connect volume V and diameter D through the sphere’s volume formula, then differentiate both sides with respect to time t. Because we know dtdV and want dtdD, we just substitute the given diameter and solve.
Step-by-step solution:
- Write the volume in terms of diameter. The volume of a sphere of radius r is V=34πr3. Since the diameter D=2r, we have r=D/2. Substituting:
V=34π(2D)3=34π⋅8D3=6πD3.
This expresses V directly as a function of D, which is convenient because we want dtdD.
- Differentiate with respect to time t. Both V and D depend on t, so we use implicit differentiation:
dtdV=6π⋅3D2⋅dtdD=2πD2dtdD.
- Plug in known values. We are told dtdV=−1 cm³/min (negative because volume is decreasing). At the instant of interest, D=10 cm. Substitute:
−1=2π(10)2⋅dtdD=2π⋅100⋅dtdD=50π⋅dtdD.
- Solve for dtdD.
dtdD=50π−1 cm/min.
The negative sign confirms the diameter is decreasing. The question asks for the rate at which it is decreasing, so we report the magnitude: 50π1 cm/min.
TipA common mistake is to use the radius instead of the diameter in the formula, or to forget the factor of 2 when converting between dr/dt and dD/dt. Writing V directly in terms of D avoids that pitfall entirely.
Watch outDo not forget the negative sign when interpreting the rate. The problem asks for “the rate at which the diameter is decreasing” — that is the absolute value of dtdD, so it is positive.
✓Final answerThe correct option is (B).
ANSWER: B
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.