The magnetic moment is associated with its spin angular momentum and orbital angular momentum. Spin only magne

NCERT Exemplar · Q15

Cr^{3+}

(i) 2.87 B.M.

(ii) 3.87 B.M.

(iii) 3.47 B.M.

(iv) 3.57 B.M.

Kerala DhseMCQ· 1mImportance★★★★★

55% · 73/132 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Magnetic Moment Calculation

From a Paperclip to a Magnet: The Intuition

You already know that a magnet can pick up iron nails. But what is actually happening inside that nail when it gets near the magnet? And why does a plastic comb, rubbed on hair, pick up tiny bits of paper — but never iron filings?

The answer lies in magnetization — the process by which a material becomes magnetic.

Think of a piece of iron as a chaotic crowd of tiny compass needles. Each needle is an atomic magnetic moment (a tiny magnet, arising from the spin of electrons). In unmagnetized iron, these needles point in random directions. Their magnetic effects cancel out, so the iron as a whole shows no net magnetism.

Now bring a strong magnet close. Its magnetic field acts like a command: "Line up!" The tiny compass needles inside the iron start rotating, aligning themselves with the external field. The more they align, the stronger the iron's own magnetic field becomes. This alignment is magnetization.

Note

Magnetization is not the same as inducing a current. It is a purely magnetic reorientation of atomic dipoles inside a material.

The Precise Definition

Magnetization ( $\vec{M}$ ) is the net magnetic dipole moment per unit volume of a material. It tells you how strongly a material is magnetized — how many tiny atomic magnets are aligned, and in which direction.

If a material has $N$ atoms per unit volume, each with an average magnetic moment $\vec{\mu}_{\text{avg}}$ , then:

\vec{M} = N \vec{\mu}_{\text{avg}}

The SI unit of $\vec{M}$ is amperes per metre (A/m). Why? Because a magnetic dipole moment has units of A·m², and dividing by volume (m³) gives A/m.

\vec{M} = \frac{\text{total magnetic dipole moment}}{\text{volume}}

How Magnetization Connects to the Magnetic Field

When a material gets magnetized, it produces its own magnetic field. The total magnetic field $\vec{B}$ inside the material is the sum of:

The external applied field $\vec{H}$ (caused by free currents, like the current in a solenoid)
The material's response — the magnetization $\vec{M}$

The fundamental relation is:

\vec{B} = \mu_0 (\vec{H} + \vec{M})

where $\mu_0 = 4\pi \times 10^{-7} \, \text{T·m/A}$ is the permeability of free space.

Watch out

Do not confuse $\vec{H}$ (magnetic field intensity, or "magnetizing field") with $\vec{B}$ (magnetic flux density). $\vec{H}$ is what you apply; $\vec{M}$ is what the material does; $\vec{B}$ is the total field you measure.

The Three Kinds of Magnetic Materials

Not all materials respond the same way to an external field. The magnetization $\vec{M}$ is proportional to $\vec{H}$ for most materials (at least for small fields):

\vec{M} = \chi_m \vec{H}

where $\chi_m$ is the magnetic susceptibility — a dimensionless number that tells you how easily a material magnetizes.

Material Type	$\chi_m$	Behaviour	Example
Diamagnetic	Small and negative ( $\approx -10^{-5}$ )	Weakly repelled by a magnet; $\vec{M}$ opposes $\vec{H}$	Water, copper, bismuth
Paramagnetic	Small and positive ( $\approx 10^{-5}$ to $10^{-3}$ )	Weakly attracted; $\vec{M}$ aligns with $\vec{H}$	Aluminium, oxygen gas
Ferromagnetic	Large and positive ( $\gg 1$ )	Strongly attracted; $\vec{M}$ can be huge and persists even after $\vec{H}$ is removed	Iron, nickel, cobalt

Why this formula?

Magnetic Moment Calculation: Why the Formula Holds

Let's build this from first principles — understanding the why before the formula.

1. What is Magnetic Moment?

A magnetic moment ( $\vec{\mu}$ ) is a measure of the strength and orientation of a magnet or current loop. It tells us how strongly an object will interact with an external magnetic field.

The core idea: any moving charge creates a magnetic field. A loop of current is like a tiny bar magnet — its magnetic moment quantifies this.

2. The Fundamental Formula: Current Loop

The Setup

Consider a planar loop of wire carrying a steady current $I$ , enclosing an area $A$ .

Why $\mu = I A$ ?

Step 1: Force on a moving charge

A charge $q$ moving with velocity $\vec{v}$ in a magnetic field $\vec{B}$ experiences:

\vec{F} = q (\vec{v} \times \vec{B})

Step 2: Torque on a current loop

For a rectangular loop of sides $a$ and $b$ ( $A = ab$ ), placed in a uniform $\vec{B}$ :

Current $I$ means charge flows. On side of length $a$ , the force magnitude is $F = I a B$ (since $I = \frac{q}{t}$ and $v = \frac{a}{t}$ ).
These forces on opposite sides form a couple (equal, opposite, not collinear).
Torque $\tau = \text{force} \times \text{perpendicular distance} = (I a B) \times (b \sin\theta)$

Step 3: Recognize the pattern

\tau = I (ab) B \sin\theta = I A B \sin\theta

This looks exactly like:

\tau = \mu B \sin\theta

Comparing, we identify:

\boxed{\mu = I A}

Why this works: The torque on a current loop is proportional to the current and the area — this product naturally defines the magnetic moment.

3. For a Single Moving Charge (Orbital Magnetic Moment)

The Setup

An electron of charge $-e$ moves in a circular orbit of radius $r$ with speed $v$ .

Why $\mu = \frac{e v r}{2}$ ?

Step 1: Treat orbit as a current loop

Time for one revolution: $T = \frac{2\pi r}{v}$
Current (charge per unit time): $I = \frac{e}{T} = \frac{e v}{2\pi r}$

Step 2: Apply $\mu = I A$

Area of orbit: $A = \pi r^2$
So: $\mu = \left(\frac{e v}{2\pi r}\right) (\pi r^2) = \frac{e v r}{2}$

Step 3: Express in terms of angular momentum

Orbital angular momentum: $L = m v r$
Therefore: $\boxed{\mu = \frac{e}{2m} L}$

Why this matters: The magnetic moment is directly proportional to angular momentum. The factor $\frac{e}{2m}$ is called the gyromagnetic ratio — it links mechanics to magnetism.

4. For a Solenoid (Many Turns)

The Setup

A solenoid of $N$ turns, length $l$ , carrying current $I$ , cross-sectional area $A$ .

Why $\mu = N I A$ ? …

Start your 14-day free trial to unlock the full solution →

$Cr^{3+}$ is $[Ar]3d^3$ with 3 unpaired electrons, so $\mu = \sqrt{3(3+2)} = \sqrt{15} \approx 3.87$ B.M. — option (ii).

The spin-only magnetic moment is

\mu_s = \sqrt{n(n+2)}\ \text{B.M.}

where $n$ is the number of unpaired electrons.

Configuration. Neutral Cr ( $Z=24$ ) is $[Ar]3d^5\,4s^1$ . Removing three electrons (the $4s$ electron first, then two $3d$ electrons) gives

$Cr^{3+}:\ [Ar]3d^3.$ …

Start your 14-day free trial to unlock the full solution →

🧠 The Core Concept First

The spin-only magnetic moment formula is:

\mu_s = \sqrt{n(n+2)} \ \text{B.M.}

Where:

$n$ = number of unpaired electrons
B.M. = Bohr Magneton

For $\text{Cr}^{3+}$ :

Atomic number of Cr = 24
Electronic configuration: $[\text{Ar}]\, 3d^5\, 4s^1$
$\text{Cr}^{3+}$ loses 3 electrons → $[\text{Ar}]\, 3d^3$
So $n = 3$ unpaired electrons

\mu_s = \sqrt{3(3+2)} = \sqrt{15} \approx 3.87 \ \text{B.M.}

✓ Correct answer: (ii) 3.87 B.M.

✗ Common Mistake #1: Using the wrong $n$ (counting all d-electrons instead of unpaired ones)

What students do wrong:

They see $3d^3$ and think $n = 3$ is correct — but sometimes they mistakenly count total d-electrons (5 for Cr atom) or use the wrong ion.

How to avoid:

Always write the exact electronic configuration of the ion (not the atom).
Count only unpaired electrons in the outermost d-orbital.
For $\text{Cr}^{3+}$ : $3d^3$ → all three are unpaired → $n = 3$ .

✗ Common Mistake #2: Using the orbital contribution formula

What students do wrong:

They try to include orbital angular momentum using $\mu = \sqrt{4S(S+1) + L(L+1)}$ for first-row transition metals.

How to avoid:

For first-row transition metal ions (like Cr), the orbital angular momentum is quenched by the crystal field.
Always use the spin-only formula unless the question explicitly says “including orbital contribution.”
In exam questions, “magnetic moment” for these ions almost always means spin-only.

✗ Common Mistake #3: Calculation error in $\sqrt{n(n+2)}$

What students do wrong:

They compute $3 \times 5 = 15$ correctly, but then approximate $\sqrt{15}$ as 3.47 or 3.57.
They confuse $\sqrt{15}$ with $\sqrt{12}$ (which is for $n=2$ ) or $\sqrt{24}$ (for $n=4$ ).

How to avoid:

Memorise common values:
- $n=1$ → $\sqrt{3} \approx 1.73$
- $n=2$ → $\sqrt{8} \approx 2.83$
- $n=3$ → $\sqrt{15} \approx 3.87$
- $n=4$ → $\sqrt{24} \approx 4.90$
- $n=5$ → $\sqrt{35} \approx 5.92$
Do not approximate — use the exact square root or the given options to match.

--- …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

KEAM 2026Set eng-2026-04194 marksMCQ
$^{2+}$
›Reveal solutionSolution
[!TLDR]

Using $\mu=\sqrt{n(n+2)}$ , Ni²⁺ has 2 unpaired electrons ( $\mu\approx2.83$ BM), so its listed value of 4.73 BM is the incorrect match.

Concept

The spin-only magnetic moment (from the NCERT/CBSE-aligned d-block chapter KEAM follows) is $\mu = \sqrt{n(n+2)}$ Bohr Magnetons, where $n$ is the count of unpaired $d$ electrons. First find each ion's $d^x$ configuration, then $n$ , then $\mu$ .

Solution

Evaluate each ion (remove electrons from 4s first, then 3d):

(A) Ni²⁺ (Z=28) $\to 3d^8$ : 2 unpaired, $\mu=\sqrt{2\cdot4}=\sqrt{8}=2.83$ BM. Listed 4.73 → wrong.

(B) Ti²⁺ (Z=22) $\to 3d^2$ : 2 unpaired, $\mu=\sqrt{8}=2.83\approx2.84$ BM ✓ …
Start your 14-day free trial to see the full solution →
KEAM 2026Set pha-2026-0418F4 marksMCQ
$Ti^{2+}$
›Reveal solutionSolution
$CH_3CH_2CH(C_2H_5)CH_2CH(CH_3)CH_2CH_3$ is 3-ethyl-5-methylheptane.

Reasoning

Select the longest continuous chain: it contains 7 carbons (heptane). Numbering to give the lowest locants:

an ethyl group at C-3,

a methyl group at C-5. …
Start your 14-day free trial to see the full solution →
KEAM 2026Set pha-2026-0419F4 marksMCQ
$Ti^{2+}$
›Reveal solutionSolution

Diamagnetic means no unpaired electrons. $Sc^{3+}$ is $3d^0$ and $Zn^{2+}$ is $3d^{10}$ — both have all electrons paired. …

Start your 14-day free trial to see the full solution →
KEAM 2025Set eng-2025-04254 marksMCQ
$Q. The magnetic moment of a divalent ion in aqueous solution is 3.87 BM. The number of unpaired electrons present in it is (A) 4 (B) 5 (C) 3 (D) 2 (E) 1$
›Reveal solutionSolution

The spin-only magnetic moment is $\mu = \sqrt{n(n+2)}$ BM. Setting $\mu = 3.87$ gives $n(n+2) = 15$ , so $n = 3$ unpaired electrons.

The spin-only formula relates magnetic moment to the number of unpaired electrons:
$\mu = \sqrt{n(n+2)} \text{ BM}$
Squaring the given moment:

$n(n+2) = (3.87)^2 \approx 15$ …
Start your 14-day free trial to see the full solution →
KEAM 2025Set eng-2025-04264 marksMCQ
$Sc^{3+}$
›Reveal solutionSolution
Magnetic moment rises with unpaired electrons; $Mn^{2+}$ ( $d^5$ ) has 5 unpaired e⁻, the maximum here.

Spin-only magnetic moment $\mu=\sqrt{n(n+2)}$ BM, so more unpaired electrons ( $n$ ) means a larger moment.

$Sc^{3+}$ : $d^0$ , $n=0$ .

$Ti^{3+}$ : $d^1$ , $n=1$ .

$Cr^{2+}$ : $d^4$ , $n=4$ .

$Fe^{2+}$ : $d^6$ , $n=4$ . …
Start your 14-day free trial to see the full solution →
KEAM 2025Set eng-2025-04274 marksMCQ
$Fe^{2+}$
›Reveal solutionSolution
Magnetic moment rises with the number of unpaired electrons. $Mn^{2+}$ ( $d^5$ ) has 5 unpaired electrons, more than any other ion listed, so it has the highest moment.

Reasoning

Spin-only magnetic moment: $\mu = \sqrt{n(n+2)}\,BM$ , where $n$ = number of unpaired electrons.

Electronic configurations (high spin):

(A) $Fe^{2+}$ : $d^6$ → 4 unpaired

(B) $Mn^{2+}$ : $d^5$ → 5 unpaired

(C) $Ni^{2+}$ : $d^8$ → 2 unpaired

(D) $Co^{2+}$ : $d^7$ → 3 unpaired …
Start your 14-day free trial to see the full solution →
KEAM 2025Set eng-2025-04294 marksMCQ
$Zn^{2+}$
›Reveal solutionSolution
$Zn^{2+} = 3d^{10}$ (fully filled, no unpaired electrons) is diamagnetic; the others have unpaired d-electrons and are paramagnetic.

Magnetic behaviour depends on unpaired electrons. The $d$ -electron counts of the $M^{2+}$ ions are:

$Zn^{2+}$ : $[Ar]3d^{10}$ — 0 unpaired electrons → diamagnetic.

$Ni^{2+}$ : $3d^8$ — 2 unpaired.

$Co^{2+}$ : $3d^7$ — 3 unpaired.

$Cu^{2+}$ : $3d^9$ — 1 unpaired. …
Start your 14-day free trial to see the full solution →
KEAM 2025Set pha-2025-0429F4 marksMCQ
$Q. What is the magnetic moment of divalent ion with three unpaired electrons? (A) 2.84 BM (B) 5.92 BM (C) 3.87 BM (D) 4.90 BM (E) 1.73 BM$
›Reveal solutionSolution

The spin-only magnetic moment is $\mu = \sqrt{n(n+2)}$ BM. For 3 unpaired electrons, $\mu = \sqrt{15} \approx 3.87$ BM.

Reasoning

The spin-only formula gives the magnetic moment from the number of unpaired electrons $n$ :
$\mu = \sqrt{n(n+2)}\ \text{BM}$
With $n = 3$ : …
Start your 14-day free trial to see the full solution →
KEAM 2023Set eng-2023-P1-A14 marksMCQ
$[MnBr_4]^{2-}, [FeF_6]^{4-}$
›Reveal solutionSolution
[MnBr4]2- is tetrahedral (sp3, μ=5.9), [FeF6]4- octahedral (sp3d2, μ=4.9), and [Ni(CN)4]2- square planar (dsp2, μ=0).

Concept and Intuition

Geometry and magnetic moment depend on the metal d-count, ligand field strength, and coordination number. Weak-field ligands give high-spin outer-orbital complexes; strong-field CN- pairs electrons giving diamagnetic dsp2 square-planar Ni2+.

Step-by-Step Solution

[MnBr4]2-: Mn2+ is d5; weak-field Br-, CN 4 → tetrahedral, sp3, 5 unpaired → μ = √(5·7) ≈ 5.9 BM.

[FeF6]4-: Fe2+ is d6; weak-field F-, CN 6 → octahedral high-spin, sp3d2, 4 unpaired → μ ≈ 4.9 BM.

[Ni(CN)4]2-: Ni2+ is d8; strong-field CN-, CN 4 → square planar, dsp2, 0 unpaired → μ = 0. …
Start your 14-day free trial to see the full solution →
KEAM 2021Set eng-2021-P1-A14 marksMCQ
$Z = 24$
›Reveal solutionSolution
The magnetic moment of $Cr^{3+}$ is 3.87 BM.

Concept and Intuition

The spin-only magnetic moment depends on the number of unpaired electrons: $\mu = \sqrt{n(n+2)}$ BM.

Step-by-Step Solution

$Z=24$ is Cr, configuration $[Ar]3d^5 4s^1$ .

$Cr^{3+}$ : remove three electrons → $[Ar]3d^3$ .

$3d^3$ has $n=3$ unpaired electrons.

$\mu = \sqrt{3(3+2)} = \sqrt{15} = 3.87$ BM. …
Start your 14-day free trial to see the full solution →

←Previous questionQ14 — Interstitial compounds are formed when small atoms are trapped inside …→Next questionQ16 — KMnO₄ acts as an oxidising agent in alkaline medium. When alkaline KMn…

Q.The magnetic moment is associated with its spin angular momentum and orbital angular momentum. Spin only magnetic moment value of $Cr^{3+}$ ion is ___________.

Concept understanding — Magnetic Moment Calculation

From a Paperclip to a Magnet: The Intuition

The Precise Definition

How Magnetization Connects to the Magnetic Field

The Three Kinds of Magnetic Materials

Why this formula?

Magnetic Moment Calculation: Why the Formula Holds

1. What is Magnetic Moment?

2. The Fundamental Formula: Current Loop

The Setup

Why $\mu = I A$ ?

3. For a Single Moving Charge (Orbital Magnetic Moment)

The Setup

Why $\mu = \frac{e v r}{2}$ ?

4. For a Solenoid (Many Turns)

The Setup

Why $\mu = N I A$ ? …

Method: Spin-Only Magnetic Moment Formula

Steps

🧠 The Core Concept First

✗ Common Mistake #1: Using the wrong $n$ (counting all d-electrons instead of unpaired ones)

✗ Common Mistake #2: Using the orbital contribution formula

✗ Common Mistake #3: Calculation error in $\sqrt{n(n+2)}$

Concept

Solution

Reasoning

Concept and Intuition

Step-by-Step Solution

Concept and Intuition

Step-by-Step Solution

Q.The magnetic moment is associated with its spin angular momentum and orbital angular momentum. Spin only magnetic moment value of Cr3+Cr^{3+}Cr3+ ion is ___________.

🎓Unlock everything free for 14 days

Q.The magnetic moment is associated with its spin angular momentum and orbital angular momentum. Spin only magnetic moment value of $Cr^{3+}$ ion is ___________.

Unlock everything free for 14 days