Q.Discuss the continuity of the function f, where f is defined by f(x)=⎩⎨⎧−2,2x,2,if x≤−1if −1<x≤1if x>1
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
For a piecewise function, check the boundary points where the formula changes — here x=−1 and x=1; elsewhere each piece is a polynomial and is continuous.
At x=−1: LHL =limx→−1−(−2)=−2; RHL =limx→−1+2x=−2; and f(−1)=−2. All equal, so f is continuous here. …
Checking the two breakpoints x=−1 and x=1 shows the pieces meet with matching values, so f is continuous on all of R.
A piecewise function can only break where its definition switches — here at x=−1 and x=1. On each open interval (−∞,−1), (−1,1), (1,∞) the function is a constant or the line 2x, all continuous. So we only need to test the two boundaries, checking limx→a−f=limx→a+f=f(a).
At x=−1
Left piece (x≤−1) gives −2: x→−1−limf(x)=−2.
Middle piece (−1<x≤1) gives 2x: x→−1+lim2x=2(−1)=−2.
Value: f(−1)=−2 (the first piece includes x=−1).
All three equal −2, so f is continuous at x=−1.
At x=1
Middle piece gives 2x: x→1−lim2x=2. …
Method: Confirming Continuity Across Several Boundaries Without Assuming an Outcome
A function with several pieces is not automatically more likely to be discontinuous just because it has more switch points — this method shows how to verify (rather than guess) that every boundary actually holds up.
Steps
Step 1: Locate every switch point and note which piece owns each one
For each boundary, check the inequality symbols carefully to see which of the two neighbouring pieces includes the boundary value itself (the one with ≤ or ≥).
Step 2: Apply the three-condition test at each boundary in turn
f(a)=limx→a−f(x)=limx→a+f(x)
Compute all three quantities from their respective pieces — never assume the outcome in advance, even if a boundary "looks" like it should behave a certain way.
Step 3: Treat a coincidental numeric match with care, not as automatic proof …
Common Mistakes
Mistake 1: Using the wrong neighbouring piece to compute f(−1), even though the numbers happen to coincide
Why it's wrong: the boundary condition is x≤−1, so f(−1) must come from the constant piece (−2), not from the middle piece 2x — here both happen to equal −2 at x=−1, which can mask a genuine piece-selection error that would matter on a different problem. Correct approach: always confirm which inequality includes the equals sign before deciding which formula defines f(a), even if the numbers seem to work out either way.
Mistake 2: Assuming a three-piece function with two switch points is more likely to contain a discontinuity than a simpler function …
- KEAM 2026Set eng-2026-04174 marksMCQQ.Let f(x)=⎩⎨⎧αx21−sec2(αx),−3,for x=0for x=0 be continuous at x=0. Then the value of α is equal to (A) −3 (B) 3 (C) 1 (D) −1 (E) 9
›Reveal solutionSolution
Continuity requires limx→0f(x)=f(0)=−3.
1−sec2(αx)=−tan2(αx). As x→0, tan(αx)≈αx, so …
- KEAM 2026Set eng-2026-04204 marksMCQQ.Consider the function f(x)=xe−x2. Which one of the following is not true? (A) f(x) is continuous at x=1 (B) f(x) is continuous at x=−1 (C) f(x) is continuous at x=2 (D) f(x) is continuous at x=−2 (E) f(x) is continuous at x=0
›Reveal solutionSolution
The function is continuous everywhere it is defined; it fails only at x=0, so the false claim is (E).
f(x)=xe−2/x is a product/composition of continuous functions for all x=0, so it is continuous at x=1,−1,2,−2. …
- KEAM 2026Set eng-2026-04224 marksMCQQ.Let f(x)={ax+3a4xx<1x≥1. If limx→1f(x) exists, then the possible values of a are (A) −1,−4 (B) 1,−4 (C) 4,−4 (D) 4,−1 (E) 1,4
›Reveal solutionSolution
Match the left- and right-hand values at x=1.
Left limit (x<1): a(1)+3=a+3. Right limit (x≥1): a4(1)=a4. …
- KEAM 2025Set eng-2025-04234 marksMCQQ.Let f(x)=⎩⎨⎧xtanαx+(β+1)tanx,5,for x=0for x=0 be continuous at x=0. Then the value of α+β is equal to (A) 2 (B) 3 (C) 4 (D) 5 (E) 6
›Reveal solutionSolution
α+β=4.
Concept and Intuition
Continuity at 0 means the limit of f equals f(0)=5. Use tan(kx)/x→k.
Step-by-Step Solution
- limx→0xtan(αx)+(β+1)tanx=α+(β+1).
- Set equal to 5: α+β+1=5.
- α+β=4.
Common Mistakes …
- KEAM 2025Set eng-2025-04284 marksMCQQ.The set of all points where the function f(x)=x2−4x, x∈R, is discontinuous, is (A) {0,2} (B) {0,4} (C) {0,−2,2} (D) {2,4} (E) {−2,2}
›Reveal solutionSolution
A rational function is discontinuous only where its denominator vanishes: x2−4=0⇒x=±2.
The function
f(x)=x2−4x
is a ratio of polynomials, hence continuous everywhere its denominator is non-zero.
The denominator vanishes when
x2−4=0⇒x=2 or x=−2. …
- KEAM 2023Set eng-2023-P2-B24 marksMCQQ.Let f:R→R be defined by f(x)=⎩⎨⎧3exx2+3x+3x2−3x−3if x<0if 0≤x<1if x≥1 (A) f is continuous on R (B) f is not continuous on R (C) f is continuous on R∖{0} (D) f is continuous on R∖{1} (E) f is not continuous on R∖{0,1}
›Reveal solutionSolution
f is continuous at x = 0 (both sides give 3) but jumps at x = 1 (left 7, right -5), so f is continuous everywhere except x = 1, i.e. on R \ {1}.
Concept and Intuition
Check the two join points of the piecewise definition; continuity holds where the one-sided limits and the value agree.
Step-by-Step Solution
- At x = 0: left limit 3e^0 = 3; right value 0 + 0 + 3 = 3. Equal, so continuous at 0.
- At x = 1: left limit 1 + 3 + 3 = 7; right value 1 - 3 - 3 = -5. Not equal, so discontinuous at 1. …
- KEAM 2022Set eng-2022-P2-B14 marksMCQQ.Let f(x)=⎩⎨⎧x+2,4x−1,x2+5,for x<1for 1≤x≤3for x>3. Then (A) f(x) is not continuous at x=−1 (B) f(x) is continuous at x=1 (C) f(x) is continuous at x=3 (D) f(x) is not continuous at x=5 (E) f(x) is not continuous at x=2
›Reveal solutionSolution
f is continuous at x=1.
Concept and Intuition
Check continuity only at the junction points x=1 and x=3; each piece is polynomial (continuous) elsewhere, so the interior points named in wrong options are trivially continuous.
Step-by-Step Solution
- At x=1: left piece x+2→3, right piece 4x−1=3, value =3. Matched ⇒ continuous.
- At x=3: piece 4x−1=11, right piece x2+5=14. Mismatch ⇒ discontinuous (so (C) is false). …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.