Q.Distinguish between ionic solids and molecular solids.
Concept understanding — Crystal Lattices and Unit Cells
A crystal is built by attaching a basis (one or more atoms, ions or molecules) to every point of a lattice -- a purely geometric, periodic arrangement of points in three dimensions -- so that Lattice + Basis = Crystal. Solids first split into crystalline (long-range ordered, sharp melting point, generally anisotropic) and amorphous (short-range order only, gradual softening, isotropic) forms; a single substance existing in more than one crystalline form is polymorphous (allotropic, for elements), while two substances sharing the same crystal structure and atomic ratio are isomorphous. Crystalline solids further split into four bonding-based families: ionic (charged ions, electrostatic bonding, hard/brittle/high-melting, conducts only molten or dissolved), covalent network (atoms in one giant covalently-bonded 3D structure, extremely hard, high-melting, poor conductor), molecular (neutral molecules or atoms held by weak intermolecular forces, soft, low-melting, insulating), and metallic (metal cations in a mobile electron sea, malleable, ductile, good conductor). The smallest repeating 3D block that reconstructs the whole lattice is the unit cell, fully described by three edge lengths (a, b, c) and three interaxial angles (alpha, beta, gamma); it can be primitive (particles at corners only), body-centred, face-centred, or base-centred. Only 14 distinct lattices (the Bravais lattices) are geometrically possible, falling into 7 crystal systems (cubic, tetragonal, orthorhombic, rhombohedral, monoclinic, triclinic, hexagonal). Corner particles are shared among 8 cells (1/8 share each), face particles among 2 cells (1/2 share each), and body-centre particles are unshared (full share) -- giving 1 particle/cell for simple cubic, 2 for bcc, and 4 for fcc. A substance's density, molar mass, and unit-cell edge length are linked by ρ=a3NAnM.
Ionic solids are held by strong electrostatic forces between charged ions (hard, high-melting, conduct when molten); molecular solids are held by weak intermolecular forces between neutral molecules (soft, low-melting, always insulators).
Ionic: charged ions, strong electrostatic bonding, hard and high-melting, conducts only when molten/dissolved. Molecular: neutral molecules, weak intermolecular forces, soft and low-melting, insulator in every state.
Step 1. Particle type: ionic solids are built from charged cations and anions; molecular solids are built from neutral molecules (or single atoms for monoatomic elements).
Step 2. Bonding: ionic solids are held together by strong electrostatic (coulombic) attraction between oppositely charged ions; molecular solids are held together by comparatively weak intermolecular forces (dispersion, dipole-dipole, or hydrogen bonds).
Step 3. Physical properties: ionic solids are hard but brittle, with high melting points; molecular solids are soft, with low melting points, because far less energy is needed to overcome weak intermolecular forces than strong ionic bonds.
Step 4. Conductivity: ionic solids are nonconductors as solids but conduct well when melted or dissolved (mobile ions); molecular solids are poor conductors (good insulators) in every state, since they contain no charged, mobile particles at all.
Ionic: charged ions, strong electrostatic bonding, hard and high-melting, conducts only when molten/dissolved. Molecular: neutral molecules, weak intermolecular forces, soft and low-melting, insulator in every state.
Compare the two solid types point by point across particle type, bonding strength, hardness/melting point, and conductivity.
- Saying molecular solids can conduct when melted, by wrongly analogising to ionic solids -- molecular solids remain insulators even molten, since melting does not create mobile charged particles.
- Forgetting that ionic solids are brittle as well as hard, not simply 'hard'.
- CBSE 2026Set ANNUAL1 markQ.Copper has fcc structure with edge length 495 pm. What is the radius of copper atom in pm?
›Reveal solutionSolution
For an fcc lattice, r=42a; with a=495 pm, r≈175.0 pm.
In a face-centred cubic (fcc) unit cell, atoms touch each other along the face diagonal. The relation between the edge length a and atomic radius r is:
4r=2a⇒r=42a
Given a=495 pm:
r=41.4142×495=0.35355×495≈175.0 pm
✓Final answerr≈175 pm.
- CBSE 2024Set ANNUAL1 markMCQQ.The number of particles present in Face Centred Cubic Unit Cell is/are _____.(a) 1(b) 2(c) 3(d) 4
›Reveal solutionSolution
FCC unit cell: 8×81+6×21=4 particles.
In an FCC unit cell, particles sit at the 8 corners and the centres of the 6 faces.
Contribution of corner atoms =8×81=1
Contribution of face-centred atoms =6×21=3
Total particles per unit cell =1+3=4.
✓Final answer(d) 4
- CBSE 2024Set ANNUAL1 markMCQQ.Which of the following ionic solid compounds shows both Schottky as well as Frenkel defects?(a) AgBr(b) NaCl(c) CsCl(d) ZnS
›Reveal solutionSolution
AgBr is the classic example of an ionic solid that shows both Schottky and Frenkel defects.
A Schottky defect occurs when a cation and an anion of similar size leave their lattice sites together, creating a pair of vacancies (seen in NaCl, KCl, CsCl). A Frenkel defect occurs when a smaller ion (usually the cation) leaves its normal site and squeezes into an interstitial site, leaving a vacancy behind (seen in AgCl, AgBr, AgI, ZnS) — here there is a large difference between cation and anion size.
In AgBr, the Ag+ ion is small enough relative to Br− to migrate to an interstitial position (giving a Frenkel defect), and AgBr is also cited in NCERT-level chemistry as the standard example that exhibits both Schottky and Frenkel defects simultaneously, unlike NaCl (Schottky only) or ZnS (Frenkel only, due to large size difference) or CsCl (Schottky only, similar-sized ions).
✓Final answerAgBr shows both Schottky and Frenkel defects.
- CBSE 2023Set ANNUAL1 markMCQQ.The relation between radius of sphere and edge length in body centered cubic lattice is given by formula:(a) 3r=4a(b) r=a3×4(c) r=43a(d) r=42×a
›Reveal solutionSolution
In a body-centred cubic lattice, atoms touch along the body diagonal, giving 4r=3a, i.e. r=(3/4)a.
In a bcc unit cell, the corner atoms and the body-centre atom touch along the body diagonal of the cube. The body diagonal has length 3a (where a is the edge length), and along this diagonal there are 4 atomic radii in contact (corner atom + centre atom + centre atom + corner atom, i.e. r+2r+r=4r):
4r=3a⇒r=43a
✓Final answer(c) r=(3/4)a, equivalently 4r=3a
- CBSE 2022Set ANNUAL1 markQ.How many atoms are there in a unit cell of a metal crystallizing in f.c.c. structure?
›Reveal solutionSolution
Counting each corner atom as 1/8 (shared by 8 cells) and each face-centred atom as 1/2 (shared by 2 cells) gives 4 atoms per f.c.c. unit cell.
Counting contributions in an f.c.c. lattice
An f.c.c. (cubic close-packed) unit cell has atoms at the 8 corners of the cube AND at the centre of each of the 6 faces.
- Corner atoms: each of the 8 corners is shared simultaneously among 8 adjoining unit cells, so each corner atom contributes only 81 to this cell: 8×81=1 atom.
- Face-centred atoms: each of the 6 face centres is shared between exactly 2 adjoining unit cells (the cell on each side of that face), so each contributes 21: 6×21=3 atoms.
Total =1+3=4 atoms per unit cell. This is why f.c.c. is also called cubic close packing (ccp) with a packing efficiency of 74%, and why metals like Cu, Ag, Au, Al, and Ni (which crystallise in this structure) use Z=4 directly in the density formula ρ=NAa3ZM.
✓Final answer4 atoms per unit cell in an f.c.c. structure.
- CBSE 2022Set ANNUAL1 markMCQQ.The co-ordination number of atoms in body centred cubic structure (bcc) is _____.(a) 4(b) 6(c) 8(d) 12
›Reveal solutionSolution
The coordination number of a body-centred cubic lattice is 8.
In a body-centred cubic (bcc) unit cell, the atom at the body centre is in direct contact with the 8 atoms located at the corners of the cube (each corner atom is equidistant from the centre atom, along the body diagonal). Correspondingly, each corner atom also touches 8 body-centre atoms of the surrounding cells. Hence the coordination number of bcc is 8 (compare: simple cubic = 6, fcc/hcp = 12).
✓Final answer(c) 8
- CBSE 2022Set ANNUAL1 markMCQQ.The number of unit cells in the cubic system is 'N', the total number of tetrahedral voids in that cubic lattice is(a) 2N(b) 4N(c) 6N(d) 8N
›Reveal solutionSolution
The stem gives N as the number of UNIT CELLS. Each ccp/fcc unit cell contains 8 tetrahedral voids, so the total number in N unit cells is 8N. Answer: (d).
In a face-centred cubic (cubic close-packed) unit cell there are 4 atoms per cell, and the number of tetrahedral voids is twice the number of atoms, i.e. 2 x 4 = 8 tetrahedral voids per unit cell.
The printed stem states that the number of UNIT CELLS is N, so the total number of tetrahedral voids = 8 x N = 8N.
The stored answer (2N) came from reading N as the number of atoms rather than the number of unit cells, which contradicts the printed stem.
✓Final answer(d) 8N.
- CBSE 2021Set OC1 markMCQQ.The number of atoms in b.c.c. arrangement is(a) 1(b) 2(c) 3(d) 4
›Reveal solutionSolution
A bcc unit cell has 8 corner atoms (1/8 share each) and 1 body-centre atom (full share), giving 2 effective atoms per cell.
Counting the atoms
In a body-centred cubic (bcc) lattice, atoms sit at the 8 corners of the cube and one additional atom sits at the centre of the cube.
- Each corner atom is shared among 8 adjacent unit cells, so it contributes 81 atom to this cell: 8×81=1 atom.
- The body-centre atom lies wholly inside this one unit cell, so it contributes a full atom: 1 atom.
Total=1+1=2 atoms per unit cell
Why the other options are wrong
-
(a) 1 would be true only for a simple cubic cell (8 corners × 1/8 = 1, no body-centre atom).
-
(c) 3 does not correspond to any standard cubic cell — it isn't obtained by any correct fractional count.
-
(d) 4 is the count for a face-centred cubic (fcc) cell (8 corners × 1/8 + 6 face atoms × 1/2 = 1 + 3 = 4), not bcc.
✓Final answer(b) 2 atoms per unit cell.
- CBSE 2021Set OC1 markQ.In crystalline solids, what is a space lattice?
›Reveal solutionSolution
A space lattice is the abstract geometric skeleton of a crystal — an ordered, repeating array of points, each standing for one constituent particle, all with identical surroundings.
Defining a space lattice
In a crystalline solid, the constituent particles (atoms, ions, or molecules) are arranged in a highly ordered, repetitive pattern extending in all three dimensions. If each particle in this arrangement is represented by a single point, the resulting three-dimensional array of points is called a space lattice (or crystal lattice).
The defining property of a space lattice is that every lattice point has exactly the same environment — the same number, kind, and arrangement of neighbouring points at the same distances and orientations — as every other lattice point. Joining the nearest lattice points by straight lines reveals the geometry of the lattice, and the smallest repeating unit of this pattern (which, when repeated in 3-D, generates the entire lattice) is called the unit cell.
✓Final answerA space lattice is a regular, repeating three-dimensional arrangement of points representing the constituent particles of a crystal, in which every point has an identical environment.
- CBSE 2020Set ANNUAL1 markMCQQ.The number of atoms per unit cell of body centred cube is:(a) 1(b) 2(c) 4(d) 6
›Reveal solutionSolution
A body-centred cubic unit cell contains 2 atoms.
In a bcc lattice, atoms sit at the 8 corners and 1 at the body centre. Each corner atom is shared among 8 neighbouring unit cells, so it contributes 1/8 to a given cell; the body-centre atom belongs entirely to that one cell. Total contribution:
Z=8×81+1×1=1+1=2
✓Final answer(b) 2
- CBSE 2017Set ANNUAL1 markMCQQ.An ionic compound crystallises in FCC type structure with 'A' ions at the centre of each face and 'B' ions occupying corners of the cube. The formula of compound is _______.(a) AB4(b) A3B(c) AB(d) AB3
›Reveal solutionSolution
Face-centred A (3 per cell) and corner B (1 per cell) give the ratio A3B.
In an FCC lattice, atoms sit at the 8 corners and the centres of the 6 faces of the cube. Corner atoms are shared among 8 unit cells, so each corner contributes 81 atom per cell; face-centred atoms are shared between 2 unit cells, so each contributes 21 atom per cell.
Number of B ions (at the 8 corners) per unit cell =8×81=1.
Number of A ions (at the 6 face centres) per unit cell =6×21=3.
So the ratio A : B =3:1, giving the formula A3B.
✓Final answer(b) A3B.
- CBSE 2016Set ANNUAL1 markMCQQ.What is the number of particles per unit cell in a face centered cubic lattice?(a) 1(b) 2(c) 3(d) 4
›Reveal solutionSolution
Counting shared corner and face contributions in an FCC unit cell gives 4 lattice points/atoms per cell.
In a face-centred cubic (FCC) lattice, particles occupy the 8 corners and the centres of all 6 faces of the cube.
- Each of the 8 corner particles is shared among 8 adjacent unit cells, so each contributes 81 to this cell: 8×81=1
- Each of the 6 face-centred particles is shared between 2 adjacent unit cells, so each contributes 21: 6×21=3
Total number of particles per FCC unit cell =1+3=4
✓Final answer(d) 4 particles per unit cell in an FCC lattice.
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.