Q.LED emits light when connected in ______. (Fill in the blank using 'forward bias' or 'reversed bias')

Optoelectronic Devices: When Light Meets a p-n Junction

You already know that a p-n junction diode lets current flow one way. But there is a deeper story: the junction can also talk to light. It can either emit light when current passes through it, or generate current when light falls on it. Devices that do this are called optoelectronic devices — and they are simply p-n junctions designed to make that light–electricity conversion efficient.

The Intuition: Two Sides of the Same Coin

Think of a p-n junction as a tiny energy staircase. On the p-side, holes are at a high energy level (the valence band). On the n-side, electrons are at a higher energy level (the conduction band). When an electron falls down that staircase — from the n-side to the p-side — it loses energy. That energy has to go somewhere.

In an ordinary silicon diode, the lost energy turns into heat (vibrations of the crystal lattice). But in a direct bandgap semiconductor like gallium arsenide, that energy can instead be released as a photon — a particle of light. That is an LED (light-emitting diode).

Now reverse the process. A photon carrying just the right amount of energy can hit the junction and kick an electron up the staircase — from the valence band to the conduction band. That creates an electron–hole pair. If you connect the diode to a circuit, those carriers get swept away by the built-in electric field, producing a current. That is a photodiode (or, if you do it on a large area with no external bias, a solar cell).

The Precise Statement

An optoelectronic device is a p-n junction (or a related semiconductor structure) that converts electrical energy into light (LED, laser diode) or light into electrical energy (photodiode, solar cell). The conversion happens because electrons and photons exchange energy across the bandgap of the semiconductor.

How Each One Works (Briefly)

LED: Under forward bias, electrons from the n-side and holes from the p-side meet in the depletion region. They recombine. In a direct-gap semiconductor, that recombination emits a photon whose energy equals the bandgap. The colour of the LED depends on the bandgap — wider gap gives shorter wavelength (blue), narrower gap gives longer wavelength (red).

Photodiode: Under reverse bias, the depletion region widens and the electric field is strong. When a photon with energy $h\nu \ge E_g$ is absorbed, it creates an electron–hole pair. The field immediately sweeps them apart — electron to n-side, hole to p-side — producing a photocurrent proportional to the light intensity.

Solar cell: Same physics as a photodiode, but no external battery. The built-in field separates the photo-generated carriers, creating a voltage across the junction. Connect a load, and current flows. The cell is essentially a large-area photodiode optimised for sunlight. …