Q.(75, 726) is a point on the terminal side of an angle θ in standard position. Determine the trigonometric function values of angle θ.
Concept understanding — Trigonometric Functions and Their Graphs
Trigonometric ratios were first defined only for acute angles inside a right triangle. This concept develops the full picture: trigonometric functions defined for any angle (or any real number), the rules that govern their signs and symmetry, and how they behave graphically.
1. From ratios to functions — the coordinate definition. Place an angle θ in standard position at the origin, initial side along the positive x-axis. Let P(x,y) be any point (other than the origin) on the terminal side, and r=OP=x2+y2. Then
sinθ=ry,cosθ=rx,tanθ=xy (x=0),cotθ=yx (y=0),cosecθ=yr (y=0),secθ=xr (x=0).
This matches the right-triangle ratios exactly when θ is acute, but now works for any θ. Since ∣x∣,∣y∣≤r, we always have −1≤sinθ≤1 and −1≤cosθ≤1. The value obtained does not depend on which point P is chosen on the terminal side (similar triangles give the same ratio).
Taking P on the unit circle x2+y2=1 makes r=1, so cosθ=x and sinθ=y directly — the point P is (cosθ,sinθ). This gives the exact values at the quadrantal angles:
| θ | 0∘ | 90∘ | 180∘ | 270∘ | 360∘ |
|---|---|---|---|---|---|
| cosθ | 1 | 0 | −1 | 0 | 1 |
| sinθ | 0 | 1 | 0 | −1 | 0 |
from which sinθ=0⟺θ=nπ and cosθ=0⟺θ=(2n+1)π/2 for integer n; tanθ is undefined exactly where cosθ=0. Also, any two angles differing by a whole multiple of 360∘ (2π) give identical values for every trigonometric function.
2. Signs — the ASTC rule. Since x,y change sign across the four quadrants while r>0 always, each function's sign is fixed by the quadrant of θ:
| Quadrant | Positive | Negative |
|---|---|---|
| I (x>0,y>0) | all six | — |
| II (x<0,y>0) | sin,cosec | cos,sec,tan,cot |
| III (x<0,y<0) | tan,cot | sin,cosec,cos,sec |
| IV (x>0,y<0) | cos,sec | sin,cosec,tan,cot |
Remembered by the mnemonic 'All Students Take Chocolate' (quadrants I, II, III, IV in order: All, Sine, Tangent, Cosine, each together with its reciprocal). Given one function's value and the quadrant, the Pythagorean identity sin2θ+cos2θ=1 (or 1+tan2θ=sec2θ) fixes the paired ratio up to a sign, and ASTC picks the correct sign; the remaining four functions then follow from the quotient identities (tan=sin/cos, cot=cos/sin) and reciprocal identities (cosec=1/sin, sec=1/cos).
3. Extending to real numbers — the wrapping function. For applications beyond geometry (waves, oscillations, calculus), trigonometric functions are extended to any real number t, not just an angle. Starting at A(1,0) on the unit circle, wrap an arc of length ∣t∣ around the circle — anticlockwise if t>0, clockwise if t<0 — to reach a point B(x,y). Since the circle has radius 1, the arc length equals the subtended angle θ in radians, so we simply define sint=sinθ=y and cost=cosθ=x. Every property already established for angles (bounds, signs, periodicity) carries over unchanged to real-number inputs.
4. Allied angles. Two angles are allied if their sum or difference is an integer multiple of π/2: so −θ, π/2±θ, π±θ, 3π/2±θ, 2π±θ are all allied to θ. Reflecting P(a,b) across the x-axis (to find the ratios of −θ) gives P′(a,−b), so sin(−θ)=−sinθ and cos(−θ)=cosθ (and hence tan(−θ)=−tanθ, etc.) — these two negative-angle facts are also exactly why cosine is even and sine is odd (point 6 below). A quarter-turn rotation similarly gives sin(90∘+θ)=cosθ, cos(90∘+θ)=−sinθ. Every allied-angle case (for 0<θ<π/2) is summarised in one table:
| −θ | 2π−θ | 2π+θ | π−θ | π+θ | 23π−θ | 23π+θ | 2π−θ | 2π+θ | |
|---|---|---|---|---|---|---|---|---|---|
| sine | −sinθ | cosθ | cosθ | sinθ | −sinθ | −cosθ | −cosθ | −sinθ | sinθ |
| cosine | cosθ | sinθ | −sinθ | −cosθ | −cosθ | −sinθ | sinθ | cosθ | cosθ |
| tangent | −tanθ | cotθ | −cotθ | −tanθ | tanθ | cotθ | −cotθ | −tanθ | tanθ |
(cosecant/secant/cotangent follow as reciprocals). Two rules rebuild this table instead of memorising it: (a) keep vs. co-change — an even multiple of π/2 away from θ (−θ,π±θ,2π±θ) keeps the same function name; an odd multiple (π/2±θ,3π/2±θ) switches to the co-function (sine↔cosine, tan↔cot, sec↔cosec); (b) the sign is then read off ASTC by checking which quadrant the allied angle itself falls into (treating θ as a small acute angle).
The practical technique: reduce any angle by (i) stripping off whole multiples of 360∘/2π (never changes the value), then (ii) writing what remains as 180∘±(acute) or 90∘±(acute) etc., and applying the table — e.g. sin150∘=sin(180∘−30∘)=sin30∘=21, or tan315∘=tan(360∘−45∘)=−tan45∘=−1.
5. Periodicity. f is periodic with period p (the smallest such positive number) if f(x+p)=f(x) for all x. Since a full 2π rotation returns the terminal side to itself, sin,cos,cosec,sec all have period 2π. But tan and cot repeat twice as fast, with period π, because a half rotation already sends both x and y to −x,−y, leaving the ratio y/x unchanged.
6. Graphs of sinx and cosx, and odd/even symmetry. The graph of y=sinx is a wave bounded between −1 and 1, repeating every 2π, rising on (−π/2,π/2) and falling on (π/2,3π/2), crossing zero at every multiple of π. The graph of y=cosx has the identical shape, just shifted left by π/2, since cosx=sin(x+π/2). A function f is even if f(−x)=f(x) (graph symmetric about the y-axis) and odd if f(−x)=−f(x) (graph symmetric about the origin). Because cos(−x)=cosx and sin(−x)=−sinx: cosine (and secant) are even, while sine, tangent, cosecant, and cotangent are all odd. To classify a combination like f(x)=sin2x−2cos2x−cosx: compute f(−x) using the negative-angle identities and compare to f(x) and −f(x) — here f(−x)=f(x) exactly (every term is a sin2, cos2, or bare cos, all unaffected by x→−x), so f is even; but f(x)=sinx+cosx gives f(−x)=−sinx+cosx, which is neither f(x) nor −f(x), so this sum is neither odd nor even. Not every function built from an odd piece and an even piece is itself odd or even — the test must be applied to the whole combination, term by term.
Compute r=x2+y2 for x=75, y=726 — it comes out to exactly 1 (the point already lies on the unit circle) — then read every function straight off x,y,r.
sinθ=726, cosθ=75, tanθ=526, cosecθ=1276, secθ=57, cotθ=1256.
With P(x,y)=(75,726) on the terminal side of θ, first find r=OP, then apply the coordinate definitions of §3.4.1 directly.
Step 1. Identify x,y. x=75, y=726.
Step 2. Compute r=x2+y2.
x2=4925,y2=494⋅6=4924,x2+y2=4925+24=4949=1.
So r=1=1 — the given point already lies on the unit circle.
Step 3. Sine and cosine. sinθ=ry=726,cosθ=rx=75.
Step 4. Tangent and cotangent.
tanθ=xy=5/726/7=526,cotθ=yx=26/75/7=265=1256 (rationalising, multiplying by 6/6).
Step 5. Cosecant and secant.
cosecθ=yr=26/71=267=1276,secθ=xr=5/71=57.
Step 6. Check. sin2θ+cos2θ=4924+4925=1 ✓, confirming the six values are mutually consistent.
sinθ=726, cosθ=75, tanθ=526, cosecθ=1276, secθ=57, cotθ=1256.
Coordinate definition — compute r then read off all six functions
- Not simplifying r=x2+y2 fully and missing that it collapses to exactly 1
- Leaving cosec/cot with a surd in the denominator instead of rationalising
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.