Write the special features of Magnetic Lorentz force.

Question 68 of 91

Q. Write the special features of Magnetic Lorentz force.

Puducherry TnboardTamil Nadu HSC (DGE) Board 2019Subjective· 3mImportance★★★★★

75% · 68/91 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Charged Particle in Magnetic Field

Charged Particle in a Magnetic Field

When a charged particle moves through a magnetic field, the field grabs it sideways. Unlike an electric field, which can speed a charge up or slow it down, a magnetic field only bends the path — it never changes the particle's speed. Understanding why leads directly to circular and helical motion, the basis of cyclotrons, mass spectrometers and the aurora.

The force: always sideways

A particle of charge $q$ moving with velocity $\vec{v}$ in a magnetic field $\vec{B}$ feels the magnetic (Lorentz) force:

\vec{F} = q\,(\vec{v} \times \vec{B})

Because of the cross product, $\vec{F}$ is perpendicular to both $\vec{v}$ and $\vec{B}$ . Its magnitude is

F = |q|\,v\,B\sin\theta

where $\theta$ is the angle between $\vec{v}$ and $\vec{B}$ .

Important

Since $\vec{F} \perp \vec{v}$ , the force does no work: $\vec{F}\cdot\vec{v} = 0$ . Therefore the kinetic energy and the speed stay constant — the field only changes the direction of motion, never the magnitude.

Case 1: velocity perpendicular to the field → a circle

If $\vec{v} \perp \vec{B}$ ( $\theta = 90^\circ$ ), the force $F = qvB$ stays constant in size and always points toward one central point. That is exactly the condition for uniform circular motion, with the magnetic force acting as the centripetal force:

qvB = \frac{mv^2}{r}

Solving for the radius:

r = \frac{mv}{qB}

The time period of one revolution is

T = \frac{2\pi r}{v} = \frac{2\pi m}{qB}

Note

The period $T$ (and the frequency $f = qB/2\pi m$ , the cyclotron frequency) does not depend on the speed or the radius. A faster particle traces a bigger circle but takes exactly the same time per loop. This speed-independence is what makes the cyclotron work.

Case 2: velocity at an angle → a helix

If $\vec{v}$ makes an angle $\theta$ with $\vec{B}$ , split it into two parts:

Perpendicular component $v_\perp = v\sin\theta$ — feels the magnetic force and drives circular motion of radius $r = \dfrac{mv_\perp}{qB}$ .
Parallel component $v_\parallel = v\cos\theta$ — feels no force (since $\vec{v_\parallel}\times\vec{B}=0$ ) and carries the particle steadily along the field line.

Combining a circle with a steady drift gives a helix. The distance advanced along the field in one full turn is the pitch:

p = v_\parallel\,T = v\cos\theta \cdot \frac{2\pi m}{qB}

A quick example

An electron ( $m = 9.1\times10^{-31}\ \text{kg}$ , $q = 1.6\times10^{-19}\ \text{C}$ ) enters a $0.02\ \text{T}$ field at $10^{6}\ \text{m/s}$ , perpendicular to $\vec{B}$ :

$r = \frac{mv}{qB} = \frac{(9.1\times10^{-31})(10^{6})}{(1.6\times10^{-19})(0.02)} \approx 2.8\times10^{-4}\ \text{m}$ …

Why this formula?

Charged Particle in a Magnetic Field — Why the Key Formulas Hold

Let's build this from first principles. The core idea is that a magnetic field exerts a force only on a moving charge, and that force is always perpendicular to both the velocity and the field.

1. The Fundamental Force Law: Lorentz Force

The starting point is the Lorentz force for a charge $q$ moving with velocity $\vec{v}$ in a magnetic field $\vec{B}$ :

\vec{F}_m = q (\vec{v} \times \vec{B})

Why this form?

Cross product $\vec{v} \times \vec{B}$ means the force is perpendicular to both $\vec{v}$ and $\vec{B}$ .
Magnitude: $F_m = |q| v B \sin\theta$ , where $\theta$ is the angle between $\vec{v}$ and $\vec{B}$ .
Direction: given by the right-hand rule (for positive $q$ ).

Key insight: Because $\vec{F}_m \perp \vec{v}$ , the magnetic force does no work — it changes only the direction of velocity, not its speed.

2. Circular Motion in a Uniform Magnetic Field

Consider a charge $q$ moving with speed $v$ perpendicular to a uniform $\vec{B}$ (so $\theta = 90^\circ$ , $\sin\theta = 1$ ).

Step 1: Force provides centripetal acceleration

The magnetic force is the only radial force:

F_m = q v B

This must equal the centripetal force required for circular motion:

F_c = \frac{m v^2}{r}

Step 2: Equate and solve for $r$

q v B = \frac{m v^2}{r}

Cancel one $v$ (assuming $v \neq 0$ ):

q B = \frac{m v}{r}

Thus:

\boxed{r = \frac{m v}{q B}}

This is the radius of the circular path (cyclotron radius).

Why this makes sense:

Larger mass $m$ → harder to turn → larger $r$
Larger charge $q$ or stronger $B$ → stronger force → tighter turn → smaller $r$
Faster speed $v$ → more momentum → larger $r$

3. Angular Frequency (Cyclotron Frequency)

From the circular motion relation:

\omega = \frac{v}{r}

Substitute $r = \frac{m v}{q B}$ :

\omega = \frac{v}{\frac{m v}{q B}} = \frac{q B}{m}

Thus:

\boxed{\omega_c = \frac{q B}{m}}

Why this is remarkable:

$\omega_c$ is independent of speed $v$ — all particles with same $q/m$ have the same angular frequency, regardless of how fast they move.
This is the principle behind cyclotrons (particle accelerators).

4. General Motion: Helical Path …

Start your 14-day free trial to unlock the full solution →

The magnetic Lorentz force $\vec F=q\vec v\times\vec B$ has several special features that distinguish it sharply from the electric force: it depends on the charge's velocity, always acts perpendicular to that velocity, and therefore never does work on the charge.

When a charge $q$ moves with velocity $\vec v$ through a magnetic field $\vec B$ , it experiences a magnetic Lorentz force $\vec F = q(\vec v \times \vec B)$ , of magnitude $F = qvB\sin\theta$ , where $\theta$ is the angle between $\vec v$ and $\vec B$ . Its special features are:

It exists only for a moving charge. Unlike the electric force $q\vec E$ , which acts on a charge whether it is at rest or moving, the magnetic force is velocity-dependent: it is zero if the charge is at rest ( $v=0$ ).
It is perpendicular to both $\vec v$ and $\vec B$ . By the property of the cross product, $\vec F$ always points in a direction normal to the plane containing $\vec v$ and $\vec B$ , given by the right-hand rule.
It does no work on the charge. Since $\vec F$ is always perpendicular to $\vec v$ (and hence to the displacement), the work done $dW = \vec F\cdot d\vec s = 0$ at every instant. The magnetic force can therefore change only the direction of motion of the charge, never its speed or kinetic energy.
It vanishes when $\vec v$ is parallel or antiparallel to $\vec B$ ( $\theta = 0°$ or $180°$ , since $\sin\theta = 0$ ), and it is maximum when $\vec v$ is perpendicular to $\vec B$ ( $\theta=90°$ ), giving $F_{max}=qvB$ — this is the condition under which a charged particle moves in a circular path in a uniform magnetic field.

…

Start your 14-day free trial to unlock the full solution →

←Previous questionQ10 — Phosphor-bronze wire is used for suspension in a moving coil galvanome…→Next questionQ12 — A particle of mass m, carrying charge q is accelerated through a poten…

Q.Write the special features of Magnetic Lorentz force.

🎓Unlock everything free for 14 days

Unlock everything free for 14 days