Q.Calculate the potential of hydrogen electrode in contact with a solution whose pH is 10.
Concept understanding — Cell Representation Nernst Equation
Cell Representation and the Nernst Equation: From Intuition to Precision
Imagine you have a Daniell cell — a zinc rod in zinc sulphate solution connected by a salt bridge to a copper rod in copper sulphate solution. You know it produces a voltage. But what happens if you dilute the copper sulphate solution? Or if you change the temperature? The voltage changes. The Nernst equation is the tool that tells you exactly how much it changes.
The Intuition First
A battery works because the two half-cells "want" to react — zinc wants to lose electrons, copper ions want to gain them. This "want" is measured as a tendency, or potential. But the strength of that tendency depends on how crowded the ions are.
Think of it like this: If you have a room full of people who all want to leave (like zinc ions wanting to form), the push to get out is stronger when the room is packed. If the room is nearly empty, the push is weaker. Similarly, for copper ions wanting to enter the metal (gain electrons), the pull is stronger when there are many copper ions around, and weaker when there are few.
The Nernst equation quantifies this: the actual cell potential depends on the concentrations (or activities) of the ions involved.
The Precise Statement
For a general cell reaction:
aA+bB→cC+dD
The cell potential E under non-standard conditions is given by:
E=E∘−nFRTlnQ
Where:
- E = cell potential under the given conditions (in volts)
- E∘ = standard cell potential (when all reactants/products are at 1 M, 1 atm, 25°C)
- R = universal gas constant (8.314 J/mol·K)
- T = temperature in Kelvin
- n = number of moles of electrons transferred in the balanced half-reactions
- F = Faraday constant (96,485 C/mol)
- Q = reaction quotient = [A]a[B]b[C]c[D]d (using concentrations for dilute solutions)
At 25°C (298 K), the equation simplifies to a very practical form:
E=E∘−n0.0591log10Q
The 0.0591 comes from F2.303RT at 298 K. Notice it uses log10 (common log), not natural log.
Cell Representation: How We Write It
In electrochemistry, we represent a cell with a shorthand notation. For the Daniell cell:
Zn(s)∣Zn2+(aq)∥Cu2+(aq)∣Cu(s)
The single vertical line ∣ represents a phase boundary (solid electrode | solution). The double line ∥ represents the salt bridge.
The anode (oxidation) is written on the left, the cathode (reduction) on the right. Electrons flow from left to right in the external circuit.
Applying the Nernst Equation to a Cell Representation
For the Daniell cell, the half-reactions are:
- Anode (oxidation): Zn(s)→Zn2+(aq)+2e−
- Cathode (reduction): Cu2+(aq)+2e−→Cu(s)
Overall: Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)
Here n=2 (two electrons transferred). The reaction quotient is:
Q=[Cu2+][Zn2+]
So the Nernst equation becomes:
E=E∘−20.0591log10[Cu2+][Zn2+]
Solids (Zn, Cu) do not appear in Q because their concentrations are constant (activity = 1).
A Worked Example
Suppose you have a Daniell cell where [Zn2+]=0.1 M and [Cu2+]=1.0 M at 25°C. E∘ for the cell is 1.10 V.
E=1.10−20.0591log101.00.1
E=1.10−20.0591log10(0.1)
log10(0.1)=−1
E=1.10−20.0591(−1)=1.10+0.02955=1.1296 V
The cell voltage is slightly higher than standard because the zinc ion concentration is lower (less "push" from the anode side, so the net driving force is larger).
A common mistake is to forget that n must match the balanced equation. If you write the half-reactions with different numbers of electrons, you'll get the wrong n. Always check that the overall reaction is balanced.
The Key Insight
The Nernst equation is not just a formula — it's a statement that electrochemical potential is a logarithmic function of concentration. This means:
- Diluting the reactant side (lowering [Cu2+]) decreases E
- Diluting the product side (lowering [Zn2+]) increases E
- At equilibrium, E=0 and Q=K (the equilibrium constant), giving lnK=RTnFE∘
This last point connects electrochemistry directly to thermodynamics — the Nernst equation is just the Gibbs free energy equation (ΔG=−nFE) written in terms of concentrations.
Cell representation and the Nernst equation together form a heavily tested pair within the NCERT/CBSE Class 12 Chemistry Electrochemistry chapter, and ‘how to write cell representation’ or ‘Nernst equation for cell reaction’ are common important-question searches for board exams, JEE Main and NEET. Being fluent in both the notation and the formula is essential for solving electrochemistry numericals quickly in competitive exams.
Why this formula?
Cell Representation & the Nernst Equation: Why It Works
The Core Question
Why does a cell's voltage change when concentrations change? The Nernst equation answers this — but the reason lies in the link between chemical free energy and electrical work.
1. The Fundamental Link: Gibbs Free Energy & Cell Potential
A galvanic cell does electrical work. The maximum useful work a cell can do equals the change in Gibbs free energy (ΔG):
ΔG=−nFEcell
Where:
- n = moles of electrons transferred
- F = Faraday constant (96,485C mol−1)
- Ecell = cell potential (volts)
Why negative? A spontaneous reaction has ΔG<0 and Ecell>0 — the negative sign makes this consistent.
2. The Chemical Side: ΔG Depends on Concentration
For a general redox reaction:
aA+bB→cC+dD
The Gibbs free energy under non-standard conditions is:
ΔG=ΔG∘+RTlnQ
Where Q is the reaction quotient:
Q=[A]a[B]b[C]c[D]d
Why this form? It comes from the relationship between chemical potential and concentration — the entropy of mixing drives concentration dependence.
3. Combining Both Sides: The Derivation
Set the electrical work equal to the chemical free energy change:
−nFEcell=−nFEcell∘+RTlnQ
Divide both sides by −nF:
Ecell=Ecell∘−nFRTlnQ
This is the Nernst equation.
4. The "Why" in Plain Terms
| Concept | Physical Meaning |
|---|---|
| Ecell∘ | Voltage when all species are at 1 M (standard state) |
| −nFRTlnQ | Correction factor — adjusts voltage for real concentrations |
| Q | Tells you how far the reaction is from equilibrium |
Key insight: When Q=K (equilibrium), Ecell=0 — the battery is dead because no net reaction occurs.
5. The Common Form (log base 10)
At 25∘C (298K):
FRTln10≈0.0592V
So:
Ecell=Ecell∘−n0.0592log10Q
Why convert to log? Exam convenience — most concentration values are powers of 10.
6. Cell Representation: How to Write Q
For a cell written as:
Zn(s)∣Zn2+(aq)∥Cu2+(aq)∣Cu(s)
The reaction is:
Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)
Solids are omitted from Q (activity = 1):
Q=[Cu2+][Zn2+]
Why omit solids? Their concentration doesn't change — they're pure phases with fixed chemical potential.
7. Exam-Ready Summary
| Step | What to Do | Why |
|---|---|---|
| 1 | Write balanced half-reactions | Identify n (electrons transferred) |
| 2 | Write overall reaction | Determine Q form |
| 3 | Plug into Nernst | Corrects E∘ for real conditions |
| 4 | Use log10 at 25∘C | 0.0592/n is exam standard |
Final takeaway: The Nernst equation is thermodynamics in disguise — it's the Gibbs free energy equation rewritten in electrical units. Every time you use it, you're balancing chemical potential against electrical potential.
The key idea is the Nernst equation applied to the hydrogen electrode, where the potential depends on the concentration (activity) of H+ ions, which is directly related to pH.
For the hydrogen electrode reaction: 2H++2e−→H2(g), the Nernst equation at 298 K is:
E=E∘−20.059log[H+]2PH2
Given E∘=0V (standard hydrogen electrode) and PH2=1atm (standard condition), this simplifies to:
E=0−20.059log[H+]21=−0.059log[H+]1=−0.059×pH
Substituting pH = 10:
E=−0.059×10=−0.59V
The potential of the hydrogen electrode is −0.59V.
The Nernst equation for the hydrogen electrode directly links its potential to the pH of the solution. For pH = 10, the potential is –0.591 V (vs. SHE).
The hydrogen electrode is the reference point for all electrochemistry — its potential under standard conditions (1 M H⁺, 1 atm H₂, 298 K) is defined as exactly 0 V. But when the solution isn't acidic, the H⁺ concentration changes, and so does the electrode's potential. The Nernst equation tells us exactly how.
For the half‑cell reaction
2H++2e−→H2(g)
the Nernst equation at 298 K is:
E=E∘−n0.0591log[H+]2PH2
Here E∘=0 V, n=2, and we take PH2=1 atm (standard pressure). That simplifies things beautifully.
- Substitute the known values
E=0−20.0591log[H+]21
- Simplify the log term
log[H+]21=log[H+]−2=−2log[H+]
So
E=−20.0591×(−2log[H+])=0.0591log[H+]
- Connect to pH By definition, pH=−log[H+], so log[H+]=−pH. Therefore
E=0.0591×(−pH)=−0.0591×pH
This is a clean, linear relationship: every increase of 1 pH unit makes the hydrogen electrode potential more negative by 59.1 mV.
- Plug in pH = 10
E=−0.0591×10=−0.591 V
A common mistake is forgetting the sign. The Nernst equation gives E=0.0591log[H+], and since log[H+] is negative for pH > 0, the potential is negative. A pH 10 solution is basic — the hydrogen electrode should be less able to reduce H⁺, so its potential drops below zero.
The result E=−0.0591×pH is a handy shortcut for any hydrogen electrode problem at 298 K and 1 atm H₂. Just multiply pH by –0.0591 and you're done.
The potential of the hydrogen electrode at pH 10 is −0.591 V (vs. SHE).
Method: Nernst Equation for a Hydrogen Electrode
This is a direct application of the Nernst equation to a single electrode (half-cell), not a full cell.
Step 1: Write the half-cell reaction
For a hydrogen electrode:
2H(aq)++2e−→H2(g)
Step 2: Write the Nernst equation for this half-cell
The general Nernst equation at 298 K (25°C) is:
E=E∘−n0.0591logQ
Where:
- E∘ = standard electrode potential = 0 V (by definition for SHE)
- n = number of electrons transferred = 2
- Q = reaction quotient = [H+]2PH2
Step 3: Substitute conditions
Given pH = 10, so:
[H+]=10−10 M
For a standard hydrogen electrode, PH2=1 atm.
Therefore:
Q=(10−10)21=1020
Step 4: Calculate the potential
E=0−20.0591log(1020)
E=−0.02955×20
E=−0.591 V
Final Answer
The potential of the hydrogen electrode at pH 10 is −0.591 V.
Key Concept Check
- The negative potential makes sense: at pH 10 (basic), H+ concentration is very low, so the reduction of H+ to H2 is less favourable than under standard conditions — hence the potential is lower (more negative).
- If you ever forget the formula, remember: E=−0.0591×pH for a hydrogen electrode at 25°C (since n=1 per H+ in the simplified form). Here: E=−0.0591×10=−0.591 V ✓
Common Mistakes: Potential of Hydrogen Electrode at pH 10
The Correct Approach First
For a hydrogen electrode, the half-cell reaction is:
2H++2e−→H2(g)
The Nernst equation for this electrode (at 298 K) is:
E=E∘−20.0591log[H+]2PH2
Since E∘=0V and PH2=1atm (standard conditions), this simplifies to:
E=0−20.0591log[H+]21=−0.0591log[H+]1
E=−0.0591×pH
At pH = 10: E=−0.591V
✗ Mistake 1: Forgetting the Negative Sign
What students do: They calculate E=+0.0591×pH and write +0.591V.
Why it's wrong: The Nernst equation gives E=−0.0591×pH. At high pH (low [H+]), the reduction potential becomes more negative — the electrode is less likely to gain electrons.
How to avoid: Always write the Nernst equation in full before simplifying. The negative sign comes from log(1/[H+])=−log[H+].
✗ Mistake 2: Using the Wrong Form of the Nernst Equation
What students do: They use E=E∘−n0.0591logQ but write Q=PH2[H+]2 (inverted).
Why it's wrong: For the reduction half-reaction 2H++2e−→H2, the reaction quotient is:
Q=[H+]2PH2
Products over reactants (excluding solids and pure liquids), with gases in atm.
How to avoid: Memorise the pattern: products (gases, aqueous) / reactants (aqueous, gases). For reduction, products are on the right side of the half-reaction.
✗ Mistake 3: Confusing pH with [H+]
What students do: They substitute pH = 10 directly into the equation without converting.
Why it's wrong: The Nernst equation uses [H+] in mol/L, not pH. You must use:
[H+]=10−pH=10−10M
How to avoid: Write the conversion step explicitly: pH=10⇒[H+]=10−10M.
✗ Mistake 4: Using n=1 Instead of n=2
What students do: They write E=−0.0591×pH but think it's because n=1.
Why it's wrong: The half-reaction involves 2 electrons (2e−), so n=2. The simplification works because:
20.0591×2=0.0591
The factor of 2 from log(1/[H+]2)=2log(1/[H+]) cancels with n=2.
How to avoid: Always state n from the balanced half-reaction before simplifying.
✗ Mistake 5: Forgetting Standard Conditions for PH2
What students do: They assume PH2 is not 1 atm and try to include it.
Why it's wrong: The problem states "hydrogen electrode" — by convention, this means PH2=1atm unless specified otherwise.
How to avoid: Remember: standard hydrogen electrode (SHE) always uses PH2=1atm and [H+]=1M for E∘=0V.
✓ Quick Checklist to Avoid All Mistakes
| Step | Action |
|---|---|
| 1 | Write balanced half-reaction: 2H++2e−→H2 |
| 2 | Identify n=2 |
| 3 | Write Nernst equation: E=0−20.0591log[H+]2PH2 |
| 4 | Set PH2=1 atm |
| 5 | Convert pH to [H+]=10−10 M |
| 6 | Simplify: E=−0.0591×pH |
| 7 | Calculate: E=−0.591V |
Final answer: −0.591V
- TG EAPCET 2026Set eng-2026-05-09-AN1 markMCQQ.The following reaction takes place in a galvanic cell 2Cr(s)+3Cd2+(aq)→2Cr3+(aq)+3Cd(s) What is ΔrGΘ of this cell (in kJ mol−1)? (F=96500 C mol−1; ECd2+∣Cd∘=−0.4 V, ECr3+∣Cr∘=−0.74 V) (A) −196.86 (B) −1968.6 (C) −32.81 (D) −19.686
›Reveal solutionSolution
The standard Gibbs free energy change is found from the cell potential via ΔrGΘ=−nFEcellΘ.
With EcellΘ=+0.34 V and n=6, we get ΔrGΘ=−196.86 kJ mol−1, so the correct option is (A).
The key idea is that a galvanic cell converts chemical energy into electrical work. The standard Gibbs free energy change ΔrGΘ is directly related to the maximum electrical work the cell can do, which is given by the product of the charge transferred and the cell potential.
We are given the overall reaction:
2Cr(s)+3Cd2+(aq)→2Cr3+(aq)+3Cd(s)
To find ΔrGΘ, we need the standard cell potential EcellΘ and the number of electrons transferred n.
-
Identify the half-reactions and their standard potentials
- Reduction of cadmium: Cd2++2e−→Cd(s), E∘=−0.40 V
- Reduction of chromium: Cr3++3e−→Cr(s), E∘=−0.74 V
In the overall reaction, Cr is oxidized (it loses electrons) and Cd2+ is reduced. So the cell potential is:
EcellΘ=EcathodeΘ−EanodeΘ
The cathode is where reduction occurs: Cd2+∣Cd with E∘=−0.40 V
The anode is where oxidation occurs: Cr∣Cr3+ with E∘=−0.74 V (but we use the reduction potential as given, then subtract).
Thus:
EcellΘ=(−0.40)−(−0.74)=+0.34 V
-
Determine the number of electrons transferred (n)
From the half-reactions:
- Cd2++2e−→Cd (each Cd²⁺ takes 2 electrons)
- Cr→Cr3++3e− (each Cr loses 3 electrons)
To balance the overall reaction, we need the least common multiple of 2 and 3, which is 6.
Multiply the cadmium half-reaction by 3: 3Cd2++6e−→3Cd
Multiply the chromium half-reaction by 2: 2Cr→2Cr3++6e−
So n=6 moles of electrons transferred per mole of reaction as written.
-
Apply the relationship between ΔrGΘ and EcellΘ
The fundamental equation is:
ΔrGΘ=−nFEcellΘ
where F=96500 C mol−1 (Faraday constant).
Substitute:
ΔrGΘ=−6×96500×0.34
First compute 6×96500=579000
Then 579000×0.34=196860
So ΔrGΘ=−196860 J mol−1
Convert to kJ mol⁻¹:
ΔrGΘ=−196.86 kJ mol−1
-
Match with the options
The value −196.86 corresponds to option (A).
Watch outA common mistake is to forget that the chromium half-cell potential given is for reduction, but in the cell chromium is oxidized. Using EcellΘ=EcathodeΘ−EanodeΘ correctly handles this — do not flip the sign of the anode potential manually.
TipNotice that the cell potential is positive (+0.34 V), which tells us the reaction is spontaneous. A negative ΔrGΘ confirms this — always check consistency.
✓Final answerThe correct option is (A).
ANSWER: A
-
- TG EAPCET 2026Set eng-2026-05-09-FN1 markMCQQ.A student builds a galvanic cell utilizing the given reaction Ni(s) + 2Ag+(aq) → Ni2+(aq) + 2Ag(s); E∘ = 1.05 V At 25 ∘C, what could the student do for the cell to generate a potential greater than that of the initial standard cell? (A) Increase the concentration of Ag+(aq) (B) Increase the size of the Ni (s) electrode (C) Decrease the size of the Ag(s) electrode (D) Increase the pressure
›Reveal solutionSolution
The cell potential depends on the reaction quotient Q via the Nernst equation; increasing [Ag+] makes Q smaller, which raises E above E∘. The correct choice is (A).
The key concept here is the Nernst equation, which tells us how the cell potential changes when concentrations deviate from standard conditions (1 M for solutes, 1 atm for gases, pure solids ignored). For the reaction
Ni(s)+2Ag+(aq)→Ni2+(aq)+2Ag(s)
the standard potential is E∘=1.05 V. The student wants E>E∘. Since E∘ is fixed, we must adjust the reaction quotient Q to make E larger.
- Write the Nernst equation for this cell At 25°C, the Nernst equation is
E=E∘−n0.0592logQ
where n is the number of electrons transferred. Here, Ni loses 2 electrons and each Ag⁺ gains 1, so n=2.
The reaction quotient is
Q=[Ag+]2[Ni2+]
(Solids like Ni and Ag do not appear in Q.)
- How to make E>E∘? Since E=E∘−20.0592logQ, we need E>E∘, which means
−20.0592logQ>0⇒logQ<0⇒Q<1
So the cell potential exceeds the standard value when the reaction quotient is less than 1.
- What does Q<1 mean in terms of concentrations?
Q=[Ag+]2[Ni2+]<1⇒[Ni2+]<[Ag+]2
Under standard conditions, both concentrations are 1 M, so Q=1 and E=E∘. To make Q<1, we can either decrease [Ni2+] or increase [Ag+].
- Evaluate the options
- (A) Increase the concentration of Ag⁺(aq) → This makes the denominator larger, so Q becomes smaller → E increases. ✓
- (B) Increase the size of the Ni(s) electrode → Solids do not appear in Q; size has no effect on potential. ✗
- (C) Decrease the size of the Ag(s) electrode → Same reasoning: solids are irrelevant to Q. ✗
- (D) Increase the pressure → No gases are involved; pressure changes do not affect concentrations of dissolved ions significantly. ✗
TipA common mistake is to think that changing the amount of solid electrode changes the potential. But the Nernst equation only includes concentrations of dissolved species and partial pressures of gases. Solids and pure liquids have constant activity = 1.
Watch outIf you mistakenly thought Q=[Ni2+]/[Ag+] (forgetting the square), you might pick the wrong answer. Always balance the stoichiometry carefully when writing Q.
✓Final answerThe correct option is (A).
ANSWER: A
- TG EAPCET 2026Set eng-2026-05-11-AN1 markMCQQ.The following reaction takes place in a galvanic cell at 298 K FeX2+(aq)+AgX+(aq)FeX3+(aq)+Ag(s) The ΔrGΘ (in kJ mol−1) and log Kc values are respectively (F=96500 Cmol−1, EAgX+/AgΘ=0.8 V, EFeX3+/FeX2+Θ=0.77 V, R=8.3 J mol−1K−1) (A) −0.508 ; 2.895 (B) 2.895 ; 5.08 (C) −2.895 ; 0.508 (D) 2.895 ; 0.508
›Reveal solutionSolution
The standard cell potential is EcellΘ=0.03 V, giving ΔrGΘ=−nFEcellΘ=−2.895 kJ mol−1 and logKc=0.059nEcellΘ≈0.508, so the correct pair is option (C).
Concept and intuition:
In a galvanic cell, the spontaneous reaction drives electrons from the anode (oxidation) to the cathode (reduction). The standard cell potential EcellΘ is the difference between the reduction potentials of the two half-cells. From EcellΘ we directly get the Gibbs free energy change via ΔrGΘ=−nFEcellΘ, and the equilibrium constant via the Nernst equation at standard conditions: logKc=0.059nEcellΘ at 298 K. The sign of ΔrGΘ must be negative for a spontaneous reaction, which immediately eliminates options with positive ΔrGΘ.
Step-by-step reasoning:
-
Identify the half-reactions and their standard potentials.
- Reduction: AgX++eX−Ag(s), EΘ=+0.80 V (cathode).
- Oxidation: FeX2+FeX3++eX−, but we have the reduction potential for FeX3+/FeX2+=+0.77 V. For oxidation, we reverse the sign: EoxΘ=−0.77 V. The cell potential is EcellΘ=EcathodeΘ−EanodeΘ=0.80−0.77=0.03 V.
-
Determine the number of electrons transferred (n).
The balanced reaction FeX2++AgX+FeX3++Ag involves one electron transfer: FeX2+FeX3++eX− and AgX++eX−Ag. So n=1.
-
Calculate ΔrGΘ.
ΔrGΘ=−nFEcellΘ=−1×96500 C mol−1×0.03 V.
Since 1 C⋅V=1 J, we get ΔrGΘ=−2895 J mol−1=−2.895 kJ mol−1.
-
Calculate logKc.
At 298 K, the Nernst equation simplifies to EcellΘ=n0.059logKc (using R=8.3, F=96500, and ln→log10 factor 2.303).
Rearranging: logKc=0.059nEcellΘ=0.0591×0.03≈0.5085≈0.508.
-
Match with the options.
The pair (−2.895, 0.508) corresponds to option (C).
Watch outA common mistake is to use the reduction potential of FeX3+/FeX2+ directly as the anode potential without reversing its sign. That would give EcellΘ=0.80−0.77=0.03 anyway (since subtraction already accounts for the sign), but if you mistakenly add them, you get 1.57 V, leading to wrong answers. Always think: cell potential = cathode (reduction) minus anode (oxidation).
TipFor a quick check: a spontaneous reaction has ΔrGΘ<0, so only options with a negative value (A and C) are plausible. Then logKc must be positive because EcellΘ>0, so (A) has logKc=2.895 which is too large for a tiny EΘ of 0.03 V — that leaves (C).
✓Final answerThe correct option is (C).
ANSWER: C
-
- TG EAPCET 2026Set ap-2026-05-04-AN1 markMCQQ.What is the SRP for the following reaction? M3+(aq) + 3e− → M(s) Given: 2M(s) + 3Zn2+(aq) → 2M3+(aq) + 3Zn(s), E∘ = 0.90 V Zn2+(aq) + 2e− → Zn(s), E∘ = -0.76 V (A) +1.66 V (B) -1.66 V (C) -0.14 V (D) +0.14 V
›Reveal solutionSolution
In the given spontaneous cell Zn2+/Zn is the cathode, so Ecell∘=Ecathode∘−Eanode∘ gives EM3+/M∘=−0.76−0.90=−1.66 V.
The spontaneous reaction
2M(s)+3Zn2+(aq)→2M3+(aq)+3Zn(s),Ecell∘=+0.90 V
has Zn2+ reduced (cathode) and M oxidised (anode). Therefore
Ecell∘=Ecathode∘−Eanode∘=EZn2+/Zn∘−EM3+/M∘
0.90=(−0.76)−EM3+/M∘
EM3+/M∘=−0.76−0.90=−1.66 V
So the standard reduction potential of M3++3e−→M is −1.66 V.
✓Final answerSRP =−1.66 V — option (B).
- TG EAPCET 2023Set ap-2023-05-10-FN1 markMCQQ.Given: \ce{Cu^{2+}(aq) + e^- -> Cu^+(aq)};\ E^\circ_{\ce{Cu^{2+}/Cu^+}} = +0.153\,\text{V}} \ce{Cu^+(aq) + e^- -> Cu(s)};\ E^\circ_{\ce{Cu^+/Cu}} = +0.520\,\text{V}} What is the value of ECuX2+/Cu∘? (A) 0.520V (B) 0.153V (C) 0.673V (D) 0.336V
›Reveal solutionSolution
The standard potential for the two-electron reduction CuX2+Cu is not the sum of the given potentials — it is the weighted average of the Gibbs free energy changes. The correct value is 0.336 V, option (D).
The trap here is tempting: just add 0.153 V and 0.520 V to get 0.673 V. That would be the answer if potentials were additive — but they are not. Electrode potentials are intensive properties; they depend on the number of electrons transferred. What is additive is the Gibbs free energy change, ΔG∘=−nFE∘.
So to find E∘ for CuX2++2eX−Cu, we must work through the free energies.
-
Write the half-reactions with their n and ΔG∘.
For CuX2++eX−CuX+:
n1=1, E1∘=+0.153 V
ΔG1∘=−n1FE1∘=−F(0.153)
For CuX++eX−Cu:
n2=1, E2∘=+0.520 V
ΔG2∘=−F(0.520)
-
Add the two steps to get the overall reaction.
CuX2++eX−CuX+
CuX++eX−Cu
Sum: CuX2++2eX−Cu
The overall ΔG∘ is the sum:
ΔGtotal∘=ΔG1∘+ΔG2∘=−F(0.153+0.520)=−F(0.673)
-
Relate total ΔG∘ to the overall E∘.
For the overall reaction, n=2. So:
ΔGtotal∘=−nFECuX2+/Cu∘=−2FECuX2+/Cu∘
Equate:
−2FECuX2+/Cu∘=−F(0.673)
Cancel −F (non-zero):
2ECuX2+/Cu∘=0.673
Hence:
ECuX2+/Cu∘=20.673=0.3365 V≈0.336 V
Watch outNever add electrode potentials directly unless the reactions have the same number of electrons. Here, adding gives 0.673 V — which is the free energy sum in disguise, not the potential.
TipWhen combining half-reactions to get a new half-reaction, always convert to ΔG∘ first, then back to E∘. The formula E∘=n1+n2n1E1∘+n2E2∘ works when the reactions are sequential (same species on both sides cancels), as here.
✓Final answerThe value of ECuX2+/Cu∘ is 0.336 V, which corresponds to option (D).
-
- TG EAPCET 2023Set ap-2023-05-10-AN1 markMCQQ.For the cell reaction Zn(s) + Ni2+(aq) → Zn2+(aq) + Ni(s), Ecell∘=0.51 V. Standard Gibbs energy change is (IF = 96500 C mol−1) (A) −24.60 kJ mol−1 (B) −19.29 kJ mol−1 (C) −49.20 kJ mol−1 (D) −98.43 kJ mol−1
›Reveal solutionSolution
The standard Gibbs energy change is directly related to the cell potential by ΔG∘=−nFEcell∘. For this reaction, n=2 electrons transferred, so ΔG∘=−2×96500×0.51=−98430 J mol−1=−98.43 kJ mol−1, matching option (D).
The key idea is that the standard Gibbs free energy change (ΔG∘) for a spontaneous electrochemical cell reaction is negative and proportional to the cell potential. The relationship is ΔG∘=−nFEcell∘, where n is the number of moles of electrons transferred in the balanced reaction, and F is Faraday’s constant (charge per mole of electrons). This formula comes from the fact that electrical work done by the cell equals the charge transferred times the potential difference, and at constant temperature and pressure, that work equals the decrease in Gibbs free energy.
-
Determine the number of electrons transferred (n).
The half-reactions are:
- Oxidation: Zn(s)→Zn2+(aq)+2e−
- Reduction: Ni2+(aq)+2e−→Ni(s) Each zinc atom loses two electrons, and each nickel ion gains two electrons. So n=2.
-
Apply the formula ΔG∘=−nFEcell∘.
Given:
Ecell∘=0.51 V
F=96500 C mol−1
Therefore:
ΔG∘=−2×96500×0.51
-
Calculate step by step.
First, 2×96500=193000.
Then, 193000×0.51=98430.
So ΔG∘=−98430 J mol−1.
-
Convert to kJ mol−1.
Since 1 kJ=1000 J:
ΔG∘=−98.43 kJ mol−1
Watch outA common mistake is forgetting to multiply by n. If you used n=1 (thinking of a single electron transfer), you’d get −49.215 kJ mol−1, which is option (C) — a tempting distractor. Always check the balanced half-reactions to find the correct n.
TipNotice that the magnitude of ΔG∘ in kJ is simply −n×96.5×Ecell∘ (since F=96.5 kC mol−1). Here, −2×96.5×0.51=−98.43, which is quicker.
✓Final answerThe correct option is (D).
ANSWER: D
-
- TG EAPCET 2023Set eng-2023-05-14-FN1 markMCQQ.For the reaction at 25 ∘C, X2O4(l)⟶2XO2(g), ΔU and ΔS are 2.1 K.Cal and 20 Cal/K respectively. What is ΔG for the reaction at the same temperature? (R = 2 Cal K−1mol−1) (A) −2.67 k.Cal (B) +2.67 k.Cal (C) −1.67 k.Cal (D) +3.67 k.Cal
›Reveal solutionSolution
Converting ΔU to ΔH using the PΔV work of the expanding gas, then applying ΔG=ΔH−TΔS, gives ΔG≈−2.67 k.Cal, so the correct option is (A).
Concept. We're given ΔU and ΔS for a reaction where a liquid converts into gas. Since gas is produced, the reaction does PΔV work on the surroundings, so ΔH=ΔU. We first find ΔH, then apply ΔG=ΔH−TΔS.
-
Relation between ΔH and ΔU. At constant pressure, ΔH=ΔU+PΔV=ΔU+ΔngRT, where Δng is the change in moles of gas.
-
Find Δng. Reaction: X2O4(l)→2XO2(g). The reactant is a liquid (0 mol gas); the product is 2 mol gas. So Δng=2.
-
Compute PΔV. With R=2 CalK−1mol−1 and T=25∘C=298 K:
PΔV=ΔngRT=2×2×298=1192 Cal=1.192 k.Cal
- Compute ΔH.
ΔH=ΔU+PΔV=2.1+1.192=3.292 k.Cal
- Compute TΔS. Converting ΔS=20 Cal/K to k.Cal/K: ΔS=0.020 k.Cal/K.
TΔS=298×0.020=5.96 k.Cal
- Compute ΔG.
ΔG=ΔH−TΔS=3.292−5.96=−2.668 k.Cal≈−2.67 k.Cal
Watch outA common pitfall is mixing calorie and kilocalorie units. Here ΔU is given in k.Cal while ΔS is given in Cal/K — convert everything to the same unit (k.Cal and k.Cal/K here) before combining them.
TipAlways check whether the moles-of-gas term (ΔngRT) is needed to convert between ΔU and ΔH — it's easy to forget when a reaction produces or consumes gas.
✓Final answerThe correct option is (A).
ANSWER: A
-
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.