(i) For a chemical reaction R -> P, the plot of concentration (R) versus time (t) is given as shown (see figur

Question 41 of 45

Q. (i) For a chemical reaction R -> P, the plot of concentration (R) versus time (t) is given as shown (see figure). Predict the order of the reaction.

(ii) Starting from the integrated form of a first order reaction, show that the half-life period of the reaction is independent of the initial concentration of the reactant.

(iii) A first order reaction is 25% complete in 40 minutes. Calculate the value of the rate constant. In what time will the reaction be 80% completed? (1+2+2) OR

(i) Write two differences between order and molecularity of a reaction.

(ii) What is a zero order reaction? The unit of the rate constant of a reaction is L mol-1 s-1. Determine the order of the reaction.

(iii) The rate of a chemical reaction is increased by four times when temperature increases from 293 K to 313 K. Calculate the energy of activation for the reaction. Assume that the activation energy is independent of temperature. (R = 8.314 J K-1 mol-1) (1+2+2)

West Bengal WbchseWest Bengal HS (WBCHSE) Board 2023Subjective· 5mImportance★★★★★

91% · 41/45 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Integrated Rate Law First Order

Integrated Rate Law for a First-Order Reaction

Imagine you have a reaction where the rate depends only on the concentration of one reactant — double the concentration, double the rate. That’s a first-order reaction. The question is: if you start with some amount of A, how does its concentration actually decay over time? The differential rate law tells you the instantaneous speed, but the integrated rate law tells you the path the concentration follows.

The Intuition

Think of a radioactive sample. Every atom has the same fixed probability of decaying per second, regardless of how many atoms are left. So if you start with 1000 atoms, in the first second maybe 100 decay. In the next second, you have 900 left, so only 90 decay. The number decaying per second keeps dropping because there are fewer atoms to decay. The result is not a straight-line drop in concentration — it’s a curve that falls steeply at first, then flattens out. That curve is an exponential decay.

For a first-order chemical reaction, the same logic holds: the rate at any moment is proportional to how much reactant is still there. So the concentration doesn’t fall by equal amounts in equal time intervals; it falls by equal fractions in equal time intervals.

The Derivation (Short)

Start with the differential rate law for a first-order reaction:

-\frac{d[A]}{dt} = k[A]

Rearrange so that all $[A]$ terms are on one side and $dt$ on the other:

\frac{d[A]}{[A]} = -k\,dt

Integrate from time $0$ (initial concentration $[A]_0$ ) to time $t$ (concentration $[A]$ ):

\int_{[A]_0}^{[A]} \frac{d[A]}{[A]} = -k \int_0^t dt

The left side integrates to $\ln[A] - \ln[A]_0$ , and the right side gives $-kt$ . So:

\ln[A] - \ln[A]_0 = -kt

Or equivalently:

\ln\frac{[A]}{[A]_0} = -kt

Convert to base-10 logarithms (since $\ln x = 2.303 \log_{10} x$ ):

\log\frac{[A]}{[A]_0} = -\frac{kt}{2.303}

Rearranging gives the form you usually see in exams:

k = \frac{2.303}{t} \log\frac{[A]_0}{[A]}

The Linear Plot — The Key Insight

The equation $\ln[A] = \ln[A]_0 - kt$ is of the form $y = mx + c$ , where $y = \ln[A]$ , $m = -k$ , $x = t$ , and $c = \ln[A]_0$ . So if you plot $\ln[A]$ (or $\log[A]$ ) against time, you get a straight line with slope $-k$ (or $-k/2.303$ for base-10 logs).

This is the hallmark of a first-order reaction. If your experimental data gives a straight line when you plot $\log[\text{reactant}]$ vs. time, the reaction is first order. If it curves, it’s not.

Tip

You don’t need to know $[A]_0$ to find $k$ from the plot — just measure the slope. The intercept gives $\ln[A]_0$ , which is a useful check.

What This Means Practically

The half-life ( $t_{1/2}$ ) is constant for a first-order reaction. Set $[A] = [A]_0/2$ in the integrated law: $\ln(1/2) = -k t_{1/2}$ , so $t_{1/2} = \frac{\ln 2}{k} \approx \frac{0.693}{k}$ . It doesn’t depend on how much you started with. …

Start your 14-day free trial to unlock the full solution →

A linear [R]-vs-t graph signals zero order; a first-order half-life formula shows it is independent of starting concentration; the given first-order data give k and the time to 80% completion.

For a zero-order reaction, rate is independent of concentration: [R] = [R]0 - kt, which is the equation of a straight line with negative slope -k. The described graph (straight line declining from a higher [R] at t=0 towards the t-axis) exactly matches this — so the reaction is zero order.
For a first-order reaction: $k = \frac{2.303}{t}\log\frac{[R]_0}{[R]}$ . At the half-life, $[R] = [R]_0/2$ : $t_{1/2} = \frac{2.303}{k}\log\frac{[R]_0}{[R]_0/2} = \frac{2.303}{k}\log 2 = \frac{0.693}{k}$ Since $[R]_0$ cancels out completely, $t_{1/2}$ depends only on the rate constant k (fixed for a given reaction at a given temperature) and not on the starting concentration.
25% complete in 40 min means 75% of [R]0 remains: …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

CBSE 2026Set ANNUAL1 markMCQ
$Q. For a first order reaction the correct graph is$
(a) concentration [R0] (y-axis) vs time (x-axis): a curve decreasing from a high value toward zero, labelled K = - slope
(b) ln[R0] (y-axis) vs time (x-axis): a straight line with negative slope, labelled K = - slope
(c) concentration log[R0] (y-axis) vs time (x-axis): a straight line with positive slope starting from origin, labelled K = slope
(d) concentration [R0] (y-axis) vs time (x-axis): a flat horizontal line (constant concentration)
›Reveal solutionSolution
For a first-order reaction, only a plot of ln(concentration) versus time is linear; a plot of concentration itself versus time is an exponential curve, not a straight line.

For a first-order reaction, integrating the rate law -d[R]/dt = k[R] gives:

ln[R] = ln[R]0 - kt

This is the equation of a straight line (y = mx + c) when ln[R] is plotted on the y-axis against t on the x-axis, with slope = -k, i.e. k = -slope.

Option (a), plain concentration [R] vs t, gives a decaying curve (exponential), not a straight line. …
Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. If the graph of log(a - x) against 't' a straight line, the order of reaction is:$
(a) Zero
(b) First
(c) Second
(d) Third
›Reveal solutionSolution

The integrated first-order rate law, k = (2.303/t) log[a/(a−x)], rearranges to log(a−x) = log a − (k/2.303)t, which is linear in t — so a straight line for log(a−x) vs t confirms first-order kinetics.

For a first-order reaction A → products, the rate law is −d[A]/dt = k[A]. Integrating with initial concentration 'a' and amount reacted 'x' at time t (so remaining concentration is a−x):

ln(a−x) = ln a − kt

⇒ log(a−x) = log a − (k/2.303) t

…

Start your 14-day free trial to see the full solution →
CBSE 2023Set 56/2/11 markMCQ
$\ln[R]$
›Reveal solutionSolution
For a first-order reaction, the integrated rate law $\ln[R] = -kt + \ln[R]_0$ is a straight line when $\ln[R]$ is plotted against time. The slope of this line is $-k$ , so the correct answer is (B).

Why the Arrhenius plot idea works here

The question asks about the slope of $\ln[R]$ vs. time for a first-order reaction. This is a classic application of the integrated rate law — not the Arrhenius equation (which deals with temperature dependence of $k$ ), but the same principle of linearising an exponential decay.

A first-order reaction follows:
$\text{Rate} = -\frac{d[R]}{dt} = k[R]$
When you integrate this differential equation, you get an exponential decay in concentration $[R]$ . Taking the natural logarithm converts that exponential into a straight line — and the slope of that line tells you the rate constant.
$\ln[R] = -kt + \ln[R]_0$
Step-by-step derivation

1. Start with the differential rate law

For a first-order reaction $A \rightarrow \text{products}$ :
$-\frac{d[A]}{dt} = k[A]$
2. Separate variables and integrate
$\int_{[A]_0}^{[A]} \frac{d[A]}{[A]} = -k \int_0^t dt$
This gives:
$\ln[A] - \ln[A]_0 = -kt$
3. Rearrange into straight-line form
$\ln[A] = -kt + \ln[A]_0$
Compare with $y = mx + c$ :

$y = \ln[A]$ (vertical axis)

$x = t$ (horizontal axis)

$m = -k$ (slope)

$c = \ln[A]_0$ (intercept)

4. Identify the slope

The slope is clearly $-k$ . …
Start your 14-day free trial to see the full solution →
CBSE 2023Set ANNUAL1 markMCQ
$Q. Expression k = (2.303/t) log([R]0/[R]) is integrated rate equation of order of reaction -$
(a) Zero order
(b) First order
(c) Second order
(d) Third order
›Reveal solutionSolution

The given logarithmic expression is the standard integrated rate law of a first-order reaction.

For a first-order reaction, rate = -d[R]/dt = k[R]. Integrating between limits [R]0 (at t=0) and [R] (at time t):

ln([R]0/[R]) = kt, or in base-10 form, k = (2.303/t) log10([R]0/[R]).

…

Start your 14-day free trial to see the full solution →
CBSE 2022Set ANNUAL1 markMCQ
$Q. The plot between ln[R] and t for first order reaction is:$
(a) straight line, negative slope (see figure)
(b) straight line, positive slope through origin (see figure)
(c) decreasing curve approaching the axis (see figure)
(d) horizontal straight line (see figure)
›Reveal solutionSolution

For a first order reaction, plotting ln[R] against time gives a straight line with a negative slope equal to -k, because the integrated rate law is linear in ln[R].

For a first order reaction, Rate = k[R]

Integrating: d[R]/[R] = -k dt

On integration: ln[R] = ln[R]0 - kt

This equation has the form y = c + mx, where y = ln[R], x = t, intercept c = ln[R]0, and slope m = -k.

…

Start your 14-day free trial to see the full solution →
CBSE 2020Set 56/3/11 mark
$\ln[R]$
›Reveal solutionSolution
For a first-order reaction, the plot of $\ln[R]$ versus time is a straight line with slope $= -k$ , where $k$ is the rate constant. The slope is negative and its magnitude gives the rate constant directly.

Why the Arrhenius Plot Works

The key insight is that first-order kinetics follows an exponential decay law. When you take the natural logarithm of the concentration, the exponential becomes linear — and the slope of that line is the rate constant (with a negative sign). This is one of the most elegant ways to determine $k$ experimentally.

The integrated rate law for a first-order reaction is:
$[R] = [R]_0 e^{-kt}$
where $[R]_0$ is the initial concentration and $[R]$ is the concentration at time $t$ . Taking $\ln$ on both sides straightens the curve into a line.

Step-by-Step Derivation

Start with the integrated rate law For a first-order reaction $\ce{A -> Products}$ , the concentration at any time $t$ is:

$[R] = [R]_0 e^{-kt}$

Take natural logarithm on both sides

$\ln[R] = \ln\left([R]_0 e^{-kt}\right)$

Use the property $\ln(ab) = \ln a + \ln b$

$\ln[R] = \ln[R]_0 + \ln(e^{-kt})$

Simplify $\ln(e^{-kt}) = -kt$

$\ln[R] = \ln[R]_0 - kt$

Rearrange into slope-intercept form $y = mx + c$ Comparing with $y = mx + c$ :

$y = \ln[R]$

$x = t$

$m = -k$ (the slope)

$c = \ln[R]_0$ (the y-intercept) …
Start your 14-day free trial to see the full solution →
CBSE 2018Set ANNUAL1 markMCQ
$Q. For the reaction C6H5-N2Cl --(Cu, Δ)--> C6H5-Cl + N2, half-life of this reaction is independent of concentration of reactant. After 10 minutes volume of N2 gas is 10 litre and after complete reaction 100 litre. The rate constant of the reaction in min^-1 unit is-$
(a) 2.303/10
(b) (2.303/10) log 5.0
(c) (2.303/10) log 2.0
(d) (2.303/10) log 4.0
›Reveal solutionSolution

First-order gas evolution: k = (2.303/t)·log[V∞/(V∞ − Vt)]; the printed numbers (10 L at 10 min, 100 L total) give k = (2.303/10)·log(100/90), which is not any of the four options — likely a misprint.

Because the half-life is independent of concentration, the reaction is first order. For a gas-evolution first-order reaction the volume of N₂ formed measures the extent of reaction: V∞ ∝ initial reactant a, and (V∞ − Vt) ∝ remaining reactant (a − x). Hence

k = (2.303/t)·log[V∞/(V∞ − Vt)].

Substituting V∞ = 100 L, Vt = 10 L, t = 10 min:

k = (2.303/10)·log(100/90) = (2.303/10)·log(1.11) ≈ 0.0046 min⁻¹.

…

Start your 14-day free trial to see the full solution →
CBSE 2018Set ANNUAL1 markMCQ
$Q. The equation of velocity constant (K) for first order reaction is$
(a) K = (2.303/t) log10 [a/(a-x)]
(b) K = (4.306/t) log10 [a/(a-x)]
(c) K = (2.303/t^2) log10 [a/(a-x)]
(d) K = (4.306/t^2) log10 [a/(a-x)]
›Reveal solutionSolution

The integrated first-order rate law gives K = (2.303/t) log10 [a/(a-x)], so option (a) is correct.

For a first-order reaction, rate = -d[A]/dt = k[A]. On integrating between the initial concentration a (at t = 0) and (a-x) after time t (where x has reacted):

k = (1/t) ln [a/(a-x)]

Converting the natural logarithm to base 10 (ln = 2.303 log10):

…

Start your 14-day free trial to see the full solution →

←Previous questionQ6 — State law of Mass action. **OR** What is active mass?→Next questionQ8 — (i) Establish the integrated form of rate equation of first order reac…

Q.(i) For a chemical reaction R -> P, the plot of concentration (R) versus time (t) is given as shown (see figure). Predict the order of the reaction.

🎓Unlock everything free for 14 days

Unlock everything free for 14 days