Q.A coil of self-inductance 2 H carries a steady current of 5 A. Calculate the energy stored in its magnetic field.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Energy Stored in an Inductor
Energy Stored in an Inductor
Think about what happens when you push a heavy door shut against a spring. You do work — you apply a force through a distance — and that work gets stored as elastic potential energy in the spring. Later, the spring can release that energy to push the door back open.
An inductor does something similar, but with a magnetic field instead of a spring.
When you push current through an inductor, you are not just fighting ordinary resistance. You are building up a magnetic field around the coil. That field takes energy to create, and once it exists, the energy is stored in the field itself. If you later try to stop the current, the inductor pushes back, using that stored energy to keep the current flowing for a while.
The Intuition: Work Done Against Induced EMF
Here is the key physical picture. When you start current flowing in an inductor, the changing current produces a changing magnetic flux, which induces a back EMF. This back EMF opposes the change in current — Lenz's law. So to increase the current from zero to some final value I, the battery must do work against this opposing EMF.
That work does not disappear. It is stored as magnetic potential energy in the inductor's field.
If you think of the inductor as a "magnetic spring," the current is like the spring's displacement. The more current you push, the more energy you store. And just like a spring, the inductor can give that energy back when you let the current drop.
The Precise Derivation
Let the current at some instant be i, and let the self-inductance be L. The instantaneous back EMF is
E=−Ldtdi
To keep the current increasing, the source must supply a voltage equal and opposite to this EMF. The instantaneous power delivered to the inductor is
P=vi=Ldtdi⋅i
The total work done to raise the current from 0 to I is the integral of power over time:
U=∫0IPdt=∫0ILidtdidt=∫0ILidi
That integral is straightforward:
U=L∫0Iidi=L[2i2]0I=21LI2
U=21LI2
This is the magnetic energy stored in an inductor carrying a steady current I.
What the Formula Tells You
- Energy depends on I2, not on I. Doubling the current quadruples the stored energy. That makes sense: a stronger current means a stronger magnetic field, and the field energy density is proportional to B2.
- Energy depends on L. A larger inductance means more magnetic flux per ampere, so more energy is stored for the same current.
- The 21 factor is the same one that appears in the energy of a capacitor (21CV2) and the energy of a spring (21kx2). It is a signature of a linear storage system — one where the "effort" (voltage, force) is proportional to the "displacement" (current, extension).
Compare with a capacitor: UC=21CV2. The inductor stores energy in a magnetic field; the capacitor stores energy in an electric field. Both have the same 21 factor because both are linear devices.
Where Does the Energy Live?
It is tempting to say the energy is "in the inductor," but more precisely, it is stored in the magnetic field that the current creates. For a long solenoid of cross-sectional area A and length ℓ, the inductance is L=μ0n2Aℓ (where n is turns per unit length), and the magnetic field inside is B=μ0nI. Substituting into U=21LI2 gives
U=21(μ0n2Aℓ)I2=21μ0B2(Aℓ)
The volume of the field is Aℓ, so the energy density (energy per unit volume) in a magnetic field is
uB=2μ0B2 …
U=21LI2=0.5×2×52. …
Given: L=2 H, I=5 A.
The energy stored in the magnetic field of a current-carrying inductor is
U=21LI2=21×2×(5)2 …
- Forgetting to square the current, giving a much smaller (and dimensionally inconsistent) answe …
- CBSE 2023Set ANNUAL2 marksQ.Find the magnetic potential energy stored in an inductor carrying current I. OR Prove mathematically that current in a capacitor leads the voltage by a phase angle of 2π when an alternating voltage is applied on it.
›Reveal solutionSolution
Work done against the back emf while building up the current in an inductor is stored as magnetic energy, U=21LI2.
When the current in an inductor of self-inductance L is increased from 0 to I, a back emf ε=−LdtdI′ opposes the change. The external source must do work against this back emf to establish the current.
Small work done in time dt, while the instantaneous current is I′:
dW=∣ε∣I′dt=LdtdI′I′dt=LI′dI′
Total work done (= energy stored) as current rises from 0 to I: …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.