Q.A proton (q=1.6×10−19 C, m=1.67×10−27 kg) moves in a cyclotron operating at a magnetic field of 1 T. Find its cyclotron frequency.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Cyclotron
The Cyclotron: Why a Constant Frequency Can Accelerate a Particle to High Speeds
Imagine you want to throw a ball faster and faster, but you can only give it a small push each time. You could set up two paddles that slap the ball back and forth, each time adding a little speed. But the ball would just go in a straight line and fly away. To keep it contained, you need something to bend its path back toward you after each push.
That is the core idea of a cyclotron. It uses a magnetic field to bend the path of a charged particle into a circle, and an electric field (applied across two hollow D-shaped electrodes called "dees") to give it a kick of energy each time it crosses the gap between them. The trick is that the electric field must reverse direction at exactly the right moment — once per half-circle — so that it always pushes the particle forward, never backward.
The Surprising Fact: Frequency Does Not Depend on Speed
Here is the key insight that makes the cyclotron work. When a charged particle moves in a uniform magnetic field B, it experiences a centripetal force:
F=qvB=rmv2
From this, the radius of its circular path is:
r=qBmv
The time it takes to complete one full circle (the period T) is:
T=v2πr=qB2πm
Notice: v cancels out. The period — and therefore the frequency f=1/T — depends only on the charge q, the mass m, and the magnetic field B. It does not depend on how fast the particle is moving.
f=2πmqB
This is the cyclotron frequency. As the particle gains energy and its speed increases, its orbit radius grows (since r=mv/qB), but the time per revolution stays exactly the same. So you can set the alternating voltage across the dees to this fixed frequency, and it will always be in sync with the particle's motion — no matter how fast the particle gets.
How It Actually Works
- A charged particle (say, a proton) is released near the centre, between the two dees.
- A magnetic field perpendicular to the dees bends its path into a half-circle inside one dee.
- When it reaches the gap, the electric field is oriented to accelerate it forward. The particle gains kinetic energy.
- It enters the other dee with a slightly higher speed, so its next half-circle has a slightly larger radius.
- By the time it returns to the gap, the electric field has reversed polarity — because exactly one half-period has passed — so it again accelerates the particle forward.
- This repeats. Each crossing of the gap adds energy. The spiral path grows outward until the particle reaches the edge and is extracted.
A common mistake is to think the particle speeds up inside the dees. It does not — the electric field is zero inside the hollow dees (they are conductors). Acceleration happens only in the gap between them. The magnetic field inside the dees merely bends the path.
The Limitation: Relativity …
Use f=qB/(2πm), the cyclotron frequency. …
Given q=1.6×10−19 C, B=1 T, m=1.67×10−27 kg:
f=2πmqB=2π(1.67×10−27)(1.6×10−19)(1)=1.049×10−261.6×10−19≈1.53×107 Hz …
Substitute directly into f=qB/(2πm) (Section 4.9); no speed or radius is needed since the cy …
- Trying to use the particle's speed or radius in the formula -- the whole point of the cyclotron-frequency result is that it needs neither. …
- CBSE 2023Set F1 markMCQQ.If T is time period and V is maximum speed of a charged particle in cyclotron, then (A) T ∝ V (B) T ∝ V^2 (C) T ∝ 1/V (D) T ∝ 1/V^2
›Reveal solutionSolution
The cyclotron period T = 2πm/(qB) is independent of the speed V, so none of the offered proportionalities holds.
The cyclotron frequency and period come from equating the magnetic force to the centripetal force:
qvB=rmv2⇒r=qBmv
The period is
T=v2πr=qB2πm
…
- CBSE 2022Set ANNUAL1 markQ.The name of machine that accelerates charged particles or ions to high energies is ______ (fill in the blank).
›Reveal solutionSolution
The device that accelerates charged particles or ions to high kinetic energies using crossed static magnetic and oscillating electric fields is the cyclotron.
A cyclotron consists of two hollow D-shaped electrodes ("dees") placed in a strong uniform magnetic field, with a high-frequency alternating voltage applied between them. A charged particle injected near the centre is accelerated each time it crosses the gap between the dees, and the magnetic field bends it into a circular path of increasing radius as its speed grows. Because the time for one half-revolution …
- CBSE 2020Set ANNUAL1 markQ.How does cyclotron increase the energy of charged particles?
›Reveal solutionSolution
The magnetic field only bends the path (does no work); the oscillating electric field across the dee-gap does the actual accelerating, once every half-cycle, in resonance with the constant cyclotron frequency.
A cyclotron has two hollow, semicircular metal electrodes called dees (D1, D2), placed in a strong, uniform magnetic field B perpendicular to their plane, with a narrow gap between them connected to a high-frequency oscillating voltage source.
Role of the magnetic field: Inside a dee (a field-free, hollow region electrically), the particle experiences only the magnetic force, which makes it move in a semicircular arc of radius
r=qBmv
Since F=qv×B is always perpendicular to v, the magnetic field changes only the direction of motion, doing no work and not changing the speed.
Role of the electric field: Each time the particle crosses the narrow gap between the two dees, it passes through the oscillating electric field. If the field's direction is correctly synchronised, the particle is given a push and gains kinetic energy qV (where V is the gap's instantaneous potential difference) every single crossing.
Why this works repeatedly (resonance condition): The time for the particle to complete a semicircle in a dee is
t=qBπm
which is independent of the particle's speed and radius (since larger v exactly gives a proportionally larger r, keeping the transit time constant). So if the oscillator frequency is fixed at the cyclotron frequency
uc=2πmqB …
- CBSE 2019Set ANNUAL1 markMCQQ.A beam of protons and α-particles are successively accelerated in a cyclotron. The ratio of the normal magnetic field to be applied to the cyclotron so that protons and α-particles have the same period of rotation is :(a) 1 : 4(b) 4 : 1(c) 1 : 2(d) 2 : 1
›Reveal solutionSolution
Since the cyclotron period depends on mass, charge and magnetic field but not speed, equal periods for a proton and an alpha particle require the magnetic field ratio Bp:Bα=1:2.
Inside a cyclotron, a charged particle moves in a circular path because the magnetic force provides the centripetal force: qvB=rmv2, giving radius r=qBmv. The period of one revolution is T=v2πr=qB2πm, which is independent of the particle's speed v.
For the proton: Tp=qpBp2πmp. For the alpha particle: Tα=qαBα2πmα.
The alpha particle has mass mα=4mp (it is a helium nucleus: 2 protons + 2 neutrons, each roughly the proton mass) and charge qα=2qp (it carries two units of elementary charge).
…
- CBSE 2018Set ANNUAL1 markMCQQ.The period of revolution of a charged particle inside a cyclotron does not depend on :(a) the velocity of the particle(b) the magnetic induction(c) the mass of the particle(d) the charge of the particle
›Reveal solutionSolution
The period of revolution of a charged particle inside a cyclotron is independent of its velocity.
Inside a cyclotron, the magnetic force provides the centripetal force for the particle's circular path: qvB=rmv2, which gives an orbit radius r=qBmv.
The period of one revolution is:
T=v2πr=v2π⋅qBmv=qB2πm
…
- CBSE 2018Set ANNUAL1 markQ.Give an application of cyclotron.
›Reveal solutionSolution
A cyclotron is used to accelerate charged particles to very high kinetic energies for nuclear research and for producing medical radioisotopes.
Concept: In a cyclotron a perpendicular magnetic field keeps the charged particle moving in circular arcs inside two dees, while an alternating voltage across the gap gives it an energy "kick" each half-cycle, spiralling it outward to high speed.
…
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.