Q.Which compound in each of the following pairs will react faster in SN2 reaction with −OH?
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Ambident Nucleophile Reactivity
Ambident Nucleophile Reactivity
Most nucleophiles attack through a single, obvious atom — a single lone pair, a single reactive site. An ambident nucleophile is unusual: it has TWO different atoms that each carry enough electron density to act as the attacking site, so it can bond to an electrophile through either one, giving two structurally different products from the same reagent.
Why This Happens: Resonance Delocalisation
An ambident nucleophile's negative charge (or lone pair) is delocalised by resonance across more than one atom, so more than one atom is genuinely nucleophilic.
Cyanide ion, CN−: −C≡N:↔:C=N−. Both the carbon and the nitrogen carry real electron density and can attack an electrophile.
- Attack through carbon gives an alkyl cyanide (nitrile), R−C≡N.
- Attack through nitrogen gives an alkyl isocyanide (isonitrile), R−N≡C.
Nitrite ion, NO2−: the negative charge is shared between nitrogen and the oxygens.
- Attack through oxygen gives an alkyl nitrite, R−O−N=O.
- Attack through nitrogen gives a nitroalkane, R−NO2.
What Decides Which End Attacks: The Counter-Ion Matters
For cyanide specifically, the identity of the metal counter-ion changes which end of CN− ends up bonded to the electrophile — this is the classic KCN-vs-AgCN contrast:
- KCN is genuinely ionic: it dissociates fully to give a FREE CN− ion. The carbon end is intrinsically the more nucleophilic site (more polarisable, and it forms the stronger C–C bond with the alkyl carbon), so KCN reacts through carbon, giving the nitrile as the major product.
- AgCN is covalent, with silver bonded to the CARBON of the cyanide group (Ag−C≡N). With the carbon end already occupied by silver, it is the NITROGEN lone pair that is left free to attack the alkyl halide — so AgCN gives the isocyanide as the major product.
A common mistake is to assume silver coordinates to nitrogen (since nitrogen is "more electronegative" or "harder"). It is the opposite: silver bonds to carbon, and it is precisely THAT occupation of the carbon end that forces attack to happen through nitrogen instead. …
Why this formula?
Ambident Nucleophile Reactivity: Why the Rules Hold
Ambident nucleophiles are nucleophiles that have two (or more) different atoms capable of donating a lone pair to form a bond with an electrophile. Classic examples include:
- Cyanide ion (CNX−): can attack via carbon or nitrogen
- Nitrite ion (NOX2X−): can attack via oxygen or nitrogen
- Enolate ions: can attack via carbon or oxygen
The key question: Why does one atom react preferentially over the other?
The Core Principle: Hard-Soft Acid-Base (HSAB) Theory
The reactivity of ambident nucleophiles is governed by HSAB theory, which states:
Hard acids prefer hard bases; soft acids prefer soft bases.
Why this holds — the reasoning:
- Hard species are small, highly charged, and non-polarizable. Their interactions are dominated by ionic (electrostatic) forces.
- Soft species are large, polarizable, and have diffuse electron clouds. Their interactions are dominated by covalent (orbital overlap) forces.
For an ambident nucleophile, the two attacking atoms differ in hardness/softness:
| Ambident Nucleophile | Harder Atom | Softer Atom |
|---|---|---|
| CNX− | N (hard) | C (soft) |
| NOX2X− | O (hard) | N (soft) |
| Enolate (CHX2=CH−OX−) | O (hard) | C (soft) |
The Key Formula(e) and Their Derivation
1. Charge Density Rule (for hard-hard interactions)
For a hard electrophile (e.g., HX+, CHX3X+, AlClX3):
The nucleophile attacks via the atom with higher charge density (more negative charge).
Why?
Hard-hard interactions are electrostatic. The force between charges is:
F=r2k⋅q1⋅q2
- q1, q2 = charges on the species
- r = distance between them
A hard electrophile has a localized positive charge. The nucleophile's atom with greater negative charge density (more concentrated charge) exerts a stronger electrostatic attraction. This atom is typically the more electronegative one (e.g., O in enolate, N in cyanide).
Example:
Enolate with CHX3I (hard electrophile) → O-alkylation (harder O attacks)
2. Polarizability Rule (for soft-soft interactions)
For a soft electrophile (e.g., CHX3CHX2I, HgX2+, BrX2):
The nucleophile attacks via the atom with higher polarizability (softer atom).
Why?
Soft-soft interactions are covalent and depend on orbital overlap. The softer atom has:
- Larger, more diffuse orbitals (e.g., 3p vs 2p)
- Lower electronegativity
- Greater polarizability — its electron cloud can distort easily to form a bond
The energy of orbital overlap is approximated by:
ΔE∝energy gap(overlap integral)2
A softer atom has a higher-energy HOMO (closer to the electrophile's LUMO), giving a smaller energy gap and stronger interaction.
Example: …
Concept: SN2 reactivity here is governed by leaving group ability (pair i) and steric hindrance (pair ii) — not by any ambident-nucleophile behaviour. −OH is not an ambident nucleophile: it has only one nucleophilic atom (oxygen). Ambident nucleophiles like CN− or NO2− have two different donor atoms and can give two different products; that isn't relevant here.
Reasoning:
- In SN2, the rate depends on how easily the leaving group departs. Iodide (I−) is a better leaving group than bromide (Br−) because the C–I bond is weaker and I− is more stable (larger, more polarizable). So CH3I reacts faster than CH3Br. …
In SN2 reactions, the nucleophile attacks from the back, so the leaving group's ability and steric hindrance around the carbon determine the rate. For pair (i), CH3I reacts faster because iodide is a better leaving group than bromide. For pair (ii), CH3Cl reacts much faster because the bulky tert-butyl group in (CH3)3CCl blocks the backside attack.
The Core Idea: What Makes an SN2 Reaction Fast?
An SN2 reaction is a single-step, bimolecular substitution. The nucleophile (−OH here) attacks the carbon from the side opposite the leaving group. This means two things matter enormously:
- The leaving group must be able to depart easily. A good leaving group stabilises the negative charge it carries after leaving. In the halogens, this ability increases down the group: I−>Br−>Cl−>F−.
- The carbon centre must be accessible. The nucleophile needs a clear path to the back of the carbon. Any bulky groups near that carbon physically block the attack — this is steric hindrance.
Let's apply these two principles to each pair.
Pair (i): CH3Br vs CH3I
Both are primary alkyl halides with no branching at the reacting carbon. So steric hindrance is identical — the only difference is the leaving group.
Step 1: Compare leaving group ability.
The leaving group departs as a halide ion (Br− or I−). The better the leaving group, the lower the activation energy for the SN2 step.
Iodide (I−) is a much better leaving group than bromide (Br−). Why? Iodine is larger and more polarisable — its negative charge is spread over a bigger volume, making it more stable in solution. Also, the C−I bond is weaker than the C−Br bond, so it breaks more easily.
Step 2: Apply the rate effect.
Since the nucleophile and the carbon skeleton are identical, the reaction with the better leaving group will be faster.
A quick memory aid: In SN2 reactions, the rate of halide leaving groups follows the trend I−>Br−>Cl−>F−. This is exactly the opposite of bond strength — weaker bonds break faster.
Result for (i): CH3I reacts faster than CH3Br.
Pair (ii): (CH3)3CCl vs CH3Cl
Here, the leaving group is the same (chloride) in both, but the carbon skeleton is drastically different.
Step 1: Examine the carbon centre.
- CH3Cl is methyl chloride — the carbon is attached to three hydrogens and one chlorine. There is almost no steric bulk around the backside.
- (CH3)3CCl is tert-butyl chloride — the carbon is attached to three methyl groups and one chlorine. Those three methyl groups are large and stick out in all directions.
Step 2: Visualise the backside attack. …
Method: Steric Hindrance & Leaving Group Ability in SN2
Concept-first understanding:
In SN2 reactions, the nucleophile attacks from the backside of the carbon–leaving group bond. Two factors dominate the rate:
- Leaving group ability – better leaving groups (weaker bases, more polarizable) leave faster.
- Steric hindrance – bulky groups around the reaction centre block the backside attack, slowing the reaction.
(i) CH3Br vs CH3I
Method: Compare leaving group ability (basicity & polarizability).
Steps:
-
Identify the leaving groups:
- Br− (bromide)
- I− (iodide)
-
Recall the trend:
- Better leaving groups are weaker bases and more polarizable.
- Basicity order: F−>Cl−>Br−>I− (least basic = best leaving group).
- Polarizability increases down the group: I− is largest and most polarizable.
-
Apply to the pair:
- I− is a better leaving group than Br−.
- Both substrates are methyl halides (no steric difference).
Result:
CH3I reacts faster than CH3Br with −OH.
(ii) (CH3)3CCl vs CH3Cl
Method: Compare steric hindrance around the reaction centre.
Steps:
-
Identify the substrate type:
- (CH3)3CCl = tertiary alkyl halide (3 bulky methyl groups).
- CH3Cl = methyl halide (no bulky groups).
-
Recall the SN2 steric requirement:
- The nucleophile must approach the backside of the carbon. …
Common Mistakes: Ambident Nucleophile Reactivity & SN2 Reaction Rates
Students often confuse nucleophile strength with leaving group ability when comparing SN2 rates. Here are the most frequent errors and how to avoid them.
Mistake 1: Confusing Leaving Group Ability with Nucleophilicity
The error: Thinking that a stronger nucleophile (like −OH) always reacts faster with a better nucleophile (like CH3I vs CH3Br) — but the question is about the substrate, not the nucleophile.
Why it’s wrong: In SN2, the rate depends on leaving group ability, not on how good the nucleophile is at attacking itself. The nucleophile (−OH) is the same in both comparisons.
How to avoid: Always identify what is changing — here, it’s the halide leaving group (Br vs I) or the alkyl group (tertiary vs primary). The nucleophile is fixed.
Mistake 2: Forgetting the Leaving Group Trend in SN2
The error: Saying CH3Br reacts faster than CH3I because Br is smaller or more electronegative.
Why it’s wrong: In SN2, the better leaving group is the one that can stabilize the negative charge after departure. Iodide (I−) is larger, more polarizable, and a weaker base than bromide (Br−), so it leaves more easily.
Correct reasoning:
- Leaving group ability: I−>Br−>Cl−>F−
- Therefore, CH3I reacts faster than CH3Br with −OH.
How to avoid: Memorize the leaving group trend: larger, weaker base = better leaving group. Use periodic trends: down the group, leaving ability increases.
Mistake 3: Ignoring Steric Hindrance in SN2
The error: Thinking (CH3)3CCl reacts faster because it has more alkyl groups (electron-donating) that stabilize the transition state.
Why it’s wrong: SN2 is extremely sensitive to steric hindrance. The nucleophile must attack from the back side, and bulky groups block this approach. Tertiary carbons are so hindered that SN2 is nearly impossible.
Correct reasoning:
- CH3Cl (primary) has no steric hindrance → fast SN2
- (CH3)3CCl (tertiary) is severely hindered → SN2 is negligible; it prefers SN1 or elimination
How to avoid: Remember the SN2 reactivity order:
Methyl > Primary > Secondary > Tertiary (tertiary is essentially unreactive in SN2).
Mistake 4: Misapplying “Ambident Nucleophile” Concept Here
The error: Thinking −OH is an ambident nucleophile (it can attack via O or H) and that this affects the rate comparison.
Why it’s wrong: −OH is not ambident — it has only one nucleophilic atom (oxygen). Ambident nucleophiles (like −CN, −NO2) have two possible attack sites. This question is purely about substrate reactivity.
How to avoid: Only invoke ambident nucleophile behavior when the nucleophile itself has multiple nucleophilic atoms. Here, focus on the substrate (alkyl halide) differences.
--- …
- AP EAPCET 2026Set eng-2026-05-12-AN1 markMCQQ.What are A and B in the following reaction sequence? C4H9BrASN2C4H9NO2 (major Product) SnHClB (A) AgNO2 ; CH3CH2CH2CH2NH2 (n-butylamine) (B) AgNO2 ; (CH3)3C−NH2 (tert-butylamine) (C) KNO2 ; CH3CH2CH(NH2)CH3 (sec-butylamine) (D) KNO2 ; (CH3)2CHCH2NH2 (isobutylamine)
›Reveal solutionSolution
AgNO2 (covalent silver nitrite) gives the nitroalkane as major product via N-attack in a clean SN2 (no skeletal rearrangement); Sn/HCl then reduces the nitro group to give n-butylamine.
Concept and Intuition
Nitrite, NO2−, is an ambident nucleophile — it can bond to an electrophile through either its nitrogen or one of its oxygens, giving two different constitutional products from the same formal reagent. The identity of the counter-cation changes which end reacts: with the more ionic alkali-metal nitrites (Na/KNO2), the reaction tends toward O-attack, giving alkyl nitrites (esters, R–O–N=O); with the more covalent silver salt AgNO2, the reaction instead proceeds through nitrogen, giving the nitroalkane R–NO2 as the major product — mirroring the well-known KCN (C-attack, nitrile) vs AgCN (N-attack, isocyanide) contrast for cyanide.
Step-by-Step Solution
- The question states the major product's formula as C4H9NO2, i.e. a nitroalkane (R–NO2), not an alkyl nitrite ester — this identifies the reagent needed as AgNO2, which favours N-attack.
- The arrow is explicitly labelled SN2: a clean, single-step backside-attack substitution with inversion at the reacting carbon and, crucially, no carbocation intermediate — so no skeletal rearrangement is possible.
- Taking C4H9Br in its default (straight-chain) reading as n-butyl bromide, SN2 attack by AgNO2 gives 1-nitrobutane, CH3CH2CH2CH2NO2, with the carbon skeleton unchanged. …
- AP EAPCET 2026Set eng-2026-05-13-FN1 markMCQQ.In which of the following set/s, reactant and reagent are correctly matched to get ethyl isonitrile as major product? I. CH3CH2Cl — AgCN II. CH3CHO — NH2OH, (CH3CO)2O III. CH3CH2NH2 — CHCl3/OH−, Δ The correct answer is (A) I , III (B) II , III (C) I only (D) II only
›Reveal solutionSolution
This tests which reagent pairs genuinely give an isonitrile (isocyanide) as the major product. AgCN + alkyl halide (N-attack) and the carbylamine reaction (1° amine + CHCl₃/KOH) both do; the oxime-dehydration route gives a nitrile instead. Answer: I, III.
Concept and Intuition
Isonitriles (R−NC) and nitriles (R−CN) are structural isomers formed from the ambident cyanide ion CN−, which can attack an electrophile through either its carbon end or its nitrogen end. With KCN (essentially ionic), the more nucleophilic and less electronegative carbon end attacks preferentially, giving the nitrile as major product. With AgCN, the compound is largely covalent — silver is bonded to the carbon of CN− (soft–soft Ag–C interaction), which ties up the carbon and leaves the lone pair on nitrogen free to act as the nucleophile. So AgCN + R–X gives the isocyanide as the major product. Separately, the carbylamine reaction — a 1° amine treated with chloroform and alcoholic KOH — is a completely different, classical route to isocyanides: KOH generates the electrophilic carbene :CCl2 from CHCl3, which is attacked by the amine nitrogen's lone pair, and after loss of HCl twice, gives R−NC directly. This reaction is in fact used as a qualitative test for primary amines (the isocyanide has a distinctive foul smell).
Step-by-Step Solution
- Statement I: CH3CH2Cl + AgCN. Because AgCN is covalent (Ag–C≡N), the nitrogen lone pair performs the SN2 attack on the alkyl halide's carbon, displacing Cl−, giving CH3CH2−N≡C (ethyl isocyanide) as the major product. Correctly matched. …
- AP EAPCET 2026Set eng-2026-05-18-FN1 markMCQQ.Identify the product Y in the following reaction sequence (catalyst; major product) C2H4i) HBrii) AgCNXH2/CatalystY (major product) (A) n-propyl amine (B) Isopropyl amine (C) Ethyl amine (D) Ethyl methyl amine
›Reveal solutionSolution
This tests the AgCN-vs-KCN distinction (isocyanide formation) and the reduction of isocyanides to secondary N-methylamines; the product Y is ethyl methyl amine.
Concept and Intuition
Cyanide salts react with alkyl halides at either the carbon end (giving a nitrile, R-CN) or the nitrogen end (giving an isocyanide/carbylamine, R-NC), and which end attacks depends on the counter-cation. KCN is largely ionic, so the more nucleophilic carbon end of CN− attacks, giving the nitrile. AgCN is more covalent (Ag–C bond character ties up the carbon), forcing the alkyl halide to be attacked through nitrogen, giving the isocyanide. Isocyanides, R−N≡C, are then reduced by H2/catalyst by sequential addition across both the π bonds of the N≡C triple bond, ending in a secondary amine R−NH−CH3 (the terminal carbon becomes a methyl group bonded to N).
Step-by-Step Solution
- C2H4+HBr→CH3CH2Br (simple electrophilic addition of HBr to ethylene; both carbons are equivalent so there's no regiochemistry issue).
- CH3CH2Br+AgCN→CH3CH2−NC (ethyl isocyanide) — this is X. AgCN's covalent Ag–C bond makes the nitrogen end of cyanide the nucleophile, giving the isocyanide rather than the nitrile that KCN would give. …
- AP EAPCET 2026Set ap-2026-05-19-FN1 markMCQQ.Consider the following reaction C2H5Cl+KCN⟶X (major product) X can also be obtained from which of the following reactions? I. C2H5NH2KOH / CHCl3, Δ II. C2H5CONH2Py, Δ III. C2H5CHO(i) NH2OH (ii) (CH3CO)2O Correct answer is (only = only) (A) I, II only (B) II, III only (C) I, III only (D) I, II, III
›Reveal solutionSolution
Ethyl chloride + KCN gives the nitrile C2H5CN; checking each alternative route shows the carbylamine reaction (I) instead gives the isomeric isocyanide, while amide dehydration (II) and aldoxime dehydration (III) both genuinely give the same nitrile.
Concept and Intuition
Cyanide is an ambident nucleophile: with alkyl halides in KCN it attacks through carbon to give a nitrile (R−CN), while the carbylamine (isocyanide) test attacks through nitrogen to give an isocyanide (R−NC) — these are structural isomers, not the same compound. Nitriles can also be made by dehydrating a primary amide (losing water from −CONH2) or by dehydrating an aldoxime (itself made from an aldehyde + hydroxylamine), both of which retain the original carbon count of the starting compound.
Step-by-Step Solution
- C2H5Cl+KCN→C2H5−CN (X = propanenitrile) via C-attack (SN2).
- Route I: C2H5NH2CHCl3/KOH,ΔC2H5NC — this is the carbylamine reaction, producing the isocyanide R−NC, NOT the nitrile R−CN. So I does not give X.
- Route II: C2H5CONH2 on dehydration loses H2O to directly give C2H5CN — same compound as X. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.An alkyl halide C3H7Cl, on reaction with a reagent X gave the major product Y (C4H7N). Y on hydrolysis released gas, which turns red litmus to blue. What are X and Y? (A) KCN/C2H5OH, CH3CH2CH2−NC (propyl isocyanide) (B) KCN/C2H5OH, CH3CH2CH2−CN (butanenitrile) (C) AgCN/C2H5OH, CH3CH2CH2−CN (butanenitrile) (D) AgCN/C2H5OH, CH3CH2CH2−NC (propyl isocyanide)
›Reveal solutionSolution
KCN/ethanol attacks alkyl halides mainly through carbon, giving the nitrile as major product; nitrile hydrolysis releases NH3 (turns red litmus blue) — X, Y = KCN/C2H5OH, propyl cyanide, option (B).
Concept and Intuition
Cyanide ion, CN−, is an ambident nucleophile — it can attack through either its carbon or its nitrogen atom, giving two different products from the same alkyl halide:
- R−X+CN−→R−CN (alkyl cyanide/nitrile) — attack through carbon.
- R−X+CN−→R−NC (alkyl isocyanide/carbylamine) — attack through nitrogen.
Which product dominates depends on the counter-ion/solvent:
- KCN (or NaCN) in a polar solvent like ethanol is largely ionic, so the more nucleophilic carbon end of CN− attacks preferentially — nitrile is the major product.
- AgCN is much more covalent (Ag–C bond character), which leaves the nitrogen lone pair more available/nucleophilic — isocyanide is the major product with AgCN.
The two products differ sharply in what their hydrolysis gives:
- Nitrile hydrolysis: R−CN+2H2OH+/OH−RCOOH+NH3 — releases ammonia gas, a colourless pungent gas that turns red litmus blue (basic gas) — matching the clue in the question.
- Isocyanide hydrolysis: R−NC+2H2O→RNH2+HCOOH — releases an amine and formic acid, not free ammonia gas in the same simple sense.
Step-by-Step Solution
- C3H7Cl (n-propyl chloride) + CN− replaces Cl with CN, giving a 4-carbon, 1-nitrogen product C4H7N — consistent with either CH3CH2CH2−CN (nitrile) or CH3CH2CH2−NC (isocyanide); both share the molecular formula C4H7N. …
- AP EAPCET 2022Set eng-2022-07-05-AN1 markMCQQ.Assertion (A): I-Bromopentane reacts with AgCN to give pentylisocyanide Reason (R): AgCN is mainly ionic in nature (A) A is true R is true and R is correct explanation of A (B) A is true, R is true but R is not correct explanation of A (C) A is true, R is false (D) A is false, R is true
›Reveal solutionSolution
The assertion (isocyanide forms with AgCN) is correct, but the stated reason (that AgCN is ionic) is factually wrong — AgCN is predominantly covalent, and that's the real reason for the isocyanide-selective outcome.
Concept and Intuition
Cyanide is an ambident nucleophile — it can attack an electrophile through either its carbon or its nitrogen lone pair. With ionic KCN/NaCN, the free CN− ion attacks predominantly through carbon (since a C-C bond is more stable than a C-N bond), giving alkyl cyanides (nitriles) as the major product. With AgCN, however, the Ag-C bond is largely covalent, tying up the carbon and leaving the nitrogen lone pair free to act as the nucleophile, giving isocyanides (isonitriles) as the major product.
Step-by-Step Solution
- Evaluate the Assertion: 1-bromopentane reacting with AgCN indeed gives pentyl isocyanide (C5H11−NC) as the major product — this matches known behaviour of AgCN in nucleophilic substitutions, so A is TRUE. …
- AP EAPCET 2022Set eng-2022-07-07-AN1 markMCQQ.Hydrolysis of the minor product formed from the reaction of 1-Bromo propane and ethanolic KCN given (A) CH3CH2CH2−NH2 (a straight three-carbon chain ending in −NH2, n-propylamine) (B) CH3CH(NH2)CH3 (a branched three-carbon chain with −NH2 on the middle carbon, isopropylamine) (C) CH3CH2CH2−COOH (a straight three-carbon chain ending in −COOH, butanoic acid) (D) CH3CH(COOH)CH3 (a branched three-carbon chain with −COOH on the middle carbon, isobutyric acid)
›Reveal solutionSolution
The minor product of alkyl halide + ethanolic KCN is the isocyanide (attack via the N end of the ambident CN−); hydrolysing an isocyanide is the classic carbylamine reaction, giving a primary amine and formic acid.
Concept and Intuition
CN− is an ambident nucleophile — it can attack through carbon (giving a nitrile, R−CN) or through nitrogen (giving an isocyanide/isonitrile, R−NC). With the more ionic, aqueous/ethanolic KCN, C-attack (nitrile) dominates as the major product, but some N-attack (isocyanide) also occurs as a minor product. Isocyanides are hydrolysed (acid-catalyzed) to a primary amine plus formic acid — this reaction is in fact used as a diagnostic (carbylamine test) and as a method to convert an alkyl halide into a primary amine with one carbon degradation avoided (unlike nitrile hydrolysis/reduction, which keeps the extra carbon).
Step-by-Step Solution
- 1-Bromopropane + ethanolic KCN → major product: CH3CH2CH2−CN (butanenitrile precursor, C-attack); minor product: CH3CH2CH2−NC (propyl isocyanide, N-attack).
- Hydrolysis of the isocyanide (minor product): CH3CH2CH2−NC+2H2OH+CH3CH2CH2−NH2+HCOOH. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.