Q.An open box with a square base is to be made out of a given quantity of cardboard of area c2. Show that the maximum volume of the box is 63c3 cubic units.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Optimization Word Problem
Optimization Word Problems
Imagine planning a garden with 40 metres of fencing and wanting the largest rectangular area. A long, thin rectangle wastes space; a square feels roomier; somewhere in between lies the best shape. That is an optimisation problem — a fixed resource and a quantity to make as large (or as small) as possible.
Every optimisation word problem has the same skeleton: the best outcome — maximum area, minimum cost, largest volume, shortest time — under a constraint — limited material, a fixed budget, a given perimeter.
The Plan of Attack
The problem gives you a story, not a graph. Your job is to turn it into a single-variable function and find its peak or valley:
- Name the quantity to optimise — call it Q, and write it using variables.
- Find the constraint — a relation between those variables (e.g. "perimeter =40").
- Reduce to one variable — use the constraint to eliminate the rest.
- Differentiate — solve Q′(x)=0 to find the critical points.
- Confirm — use Q′′(x)<0 for a maximum or Q′′(x)>0 for a minimum.
- Answer the question asked — give the actual dimensions/cost, not just x.
In board exams these problems almost always reduce to a quadratic or cubic. Once Q(x) is written, the calculus is mechanical.
The Garden, Worked
40 m of fencing encloses a rectangle; maximise the area.
- Objective: A=lw.
- Constraint: 2l+2w=40, so l+w=20.
- Reduce: w=20−l, giving A(l)=l(20−l)=20l−l2.
- Differentiate: A′(l)=20−2l=0⟹l=10.
- Confirm: A′′(l)=−2<0, a maximum.
So l=w=10 m — a 10 m × 10 m square.
A common slip: solving A′(l)=0 and stopping. Always check max vs min, and answer in the units asked.
The Common Families
| Problem type | Typical objective | Typical constraint |
|--------------|-------------------|--------------------| …
Concept: Optimization Word Problem — maximizing volume under a fixed surface area constraint.
Let the square base have side x and the height be h. The cardboard area (open box) is:
x2+4xh=c2
So h=4xc2−x2. Volume V=x2h=4x(c2−x2).
Differentiate V with respect to x and set to zero:
dxdV=4c2−3x2=0⇒x2=3c2 …
We treat the box’s dimensions as variables, express volume in terms of one variable using the fixed surface area c2, then maximize by calculus. The maximum volume is 63c3.
This is a classic optimization problem: you have a fixed amount of material (cardboard of area c2) and you want to shape it into an open-top box (square base, no lid) that holds the greatest possible volume. The key is to translate the physical constraint — the given area — into an equation linking the dimensions, then write volume as a function of a single variable and find its maximum using differentiation.
Let’s go step by step.
1. Define the variables.
Let the side of the square base be x units, and let the height of the box be h units. Since the box is open at the top, the cardboard used consists of:
- the base: area x2
- four side walls: each of area xh, so total side area 4xh
The total area of cardboard is given as c2. So:
x2+4xh=c2
2. Express height in terms of base side.
From the area constraint:
4xh=c2−x2⇒h=4xc2−x2
We need x>0 and h>0, so c2−x2>0, i.e. 0<x<c.
3. Write the volume function.
Volume V of the box is base area times height:
V=x2h=x2⋅4xc2−x2=4x(c2−x2)
So:
V(x)=4c2x−x3
4. Maximize V(x) for 0<x<c.
Differentiate with respect to x:
V′(x)=4c2−3x2
Set V′(x)=0:
c2−3x2=0⇒x2=3c2⇒x=3c
(The negative root is irrelevant.)
A common mistake is to forget that x must be positive and less than c. Here c/3≈0.577c, which is valid.
5. Confirm it’s a maximum.
Check the second derivative: …
Method: Maximizing the Volume of a Container Built from a Fixed Amount of Material
This is the standard box-from-a-sheet optimization family: express the material used as a constraint equation, use it to eliminate one dimension, then maximize the resulting single-variable volume function.
Steps
Step 1: Name the dimensions and write the material (area) constraint
Assign a variable to each independent dimension of the container (e.g. base side, height). Add up the areas of every actual piece of material used — base, walls, and a lid if present — and set that sum equal to the given fixed area.
Step 2: Solve the constraint for one dimension and substitute into the volume formula
Solve the area equation for the less convenient variable (typically height, since it usually appears linearly) in terms of the other. Substitute this into the volume formula so that volume becomes a function of a single variable.
Step 3: Differentiate, solve, and confirm it is a maximum …
Common Mistakes
Mistake 1: Writing the area equation as if the box had a lid
Since the box is open (no top), the cardboard used is only the base plus four sides: x2+4xh=c2. Why it's wrong: forgetting "open" and including a top face gives 2x2+4xh=c2 instead, which changes every downstream step and produces a wrong maximum volume. Correct approach: re-check whether a box problem says "open" or "closed" and count faces accordingly — one square base, four rectangular sides, zero tops, for this problem.
Mistake 2: Losing track of the domain 0<x<c and accepting a negative or invalid root …
Showing the 12 most recent of 19 on this concept.
- AP EAPCET 2021Set eng-2021-10-05-FN1 markMCQQ.From a rectangular sheet having dimensions 30 cm×80 cm, four equal squares of side x cm are cut at each corner. The remaining sides of the rectangle are folded up vertically so as to form an open rectangular box. Find the value of 'x' for which the volume of the box formed is maximum. (A) x=30 cm (B) x=20 cm (C) x=320 cm (D) x=15 cm
›Reveal solutionSolution
Express box volume as a function of the cut-square side x, maximize with calculus, and discard the root that isn't physically valid. The answer is (C).
Concept and Intuition
Cutting squares of side x from each corner and folding up gives a box of dimensions (30−2x)×(80−2x)×x. The volume is a cubic in x with two critical points; physically x must be less than half the shorter side (15 cm), which rules out one root.
Step-by-Step Solution
- V(x)=x(30−2x)(80−2x).
- Expand: (30−2x)(80−2x)=2400−60x−160x+4x2=2400−220x+4x2.
- V(x)=2400x−220x2+4x3.
- V′(x)=2400−440x+12x2. Set to 0: 12x2−440x+2400=0⇒3x2−110x+600=0.
- x=6110±1102−4(3)(600)=6110±12100−7200=6110±70, giving x=30 or x=320. …
- AP EAPCET 2026Set eng-2026-05-18-FN1 markMCQQ.The maximum volume (in cu. m) of the right circular cone having slant height 3m. is (A) 6π (B) 33π (C) 34π (D) 23π
›Reveal solutionSolution
Express the cone's volume in terms of its height alone using the fixed slant height, then maximize; the maximum volume is 23π m3.
Concept and Intuition
With the slant height l fixed, radius and height are linked by r2+h2=l2 (Pythagoras on the cone's cross-section). This turns a two-variable optimization (over r and h) into a single-variable one, which we handle with ordinary calculus.
Step-by-Step Solution
- Given l=3, so r2+h2=9 ⇒ r2=9−h2 (with 0<h<3).
- Volume of a cone:
V=31πr2h=3π(9−h2)h=3π(9h−h3).
- Differentiate with respect to h and set to zero:
dhdV=3π(9−3h2)=0 ⇒ h2=3 ⇒ h=3.
- Check it's a maximum: dh2d2V=3π(−6h)<0 for h>0, confirming a maximum.
- Substitute back: …
- AP EAPCET 2022Set eng-2022-07-07-AN1 markMCQQ.If an open cylinder of given surface area has maximum volume then its radius is (A) Height of the cylinder (B) Height of the cylinder / 2 (C) 2 times Height of the cylinder (D) 3 times Height of the cylinder
›Reveal solutionSolution
A constrained-optimisation problem: maximise the volume of an open cylinder for a fixed surface area. Answer: the radius equals the height (r=h).
Concept and Intuition
"Open" cylinder means it has only one circular base (like a cup, no lid), so its total surface area is base + lateral surface, S=πr2+2πrh — different from a closed cylinder (two bases) which would give a different optimum (h=2r). Fixing S lets you express h in terms of r, turning the volume into a single-variable function of r to maximise.
Step-by-Step Solution
- Surface constraint: S=πr2+2πrh⇒h=2πrS−πr2.
- Volume: V=πr2h=πr2⋅2πrS−πr2=2r(S−πr2)=2Sr−πr3.
- Differentiate w.r.t. r and set to zero: drdV=2S−3πr2=0⇒S=3πr2. …
- AP EAPCET 2022Set eng-2022-07-06-FN1 markMCQQ.The maximum area of a right angled triangle with hypotenuse h is (A) 22h2 (B) 2h2 (C) 2h2 (D) 4h2
›Reveal solutionSolution
Maximising the area of a right triangle with fixed hypotenuse h occurs at the isosceles case, giving area h2/4.
Concept and Intuition
For a right triangle with legs a,b and fixed hypotenuse h (so a2+b2=h2 is a constraint), the area 21ab is maximised by symmetry when a=b — this is a classic constrained-optimisation result, provable via calculus or the AM-GM inequality (a2+b2≥2ab, so ab≤2a2+b2=2h2, with equality iff a=b).
Step-by-Step Solution
- Let the legs be a and b=h2−a2 (from Pythagoras), and area S=21ah2−a2.
- Maximise S2=41a2(h2−a2) instead (avoids the square root). Let u=a2: S2=41u(h2−u), a downward parabola in u, maximised at u=h2/2.
- So a2=h2/2⇒a=h/2, and then b2=h2−a2=h2/2⇒b=h/2 too — the triangle is isosceles right-angled. …
- AP EAPCET 2023Set eng-2023-05-16-FN1 markMCQQ.Given that the solid obtained by rotating a rectangle about one of its side is a cylinder. If the perimeter of a rectangle is 48 cm and the volume of the cylinder formed by rotating it is maximum, then the dimensions of that rectangle is (A) 14, 10 (B) 20, 4 (C) 18, 6 (D) 8, 16
›Reveal solutionSolution
Maximise V=πr2h subject to 2(r+h)=48; the optimum rectangle is 8×16.
Concept and Intuition
Rotating a rectangle about one of its sides sweeps the opposite side around in a circle, producing a cylinder whose height equals the rotation-axis side and whose radius equals the other side. This converts a plane geometry optimisation into a single-variable calculus problem once the perimeter constraint eliminates one variable.
Step-by-Step Solution
- Let the side about which we rotate be h (height of the cylinder) and the other side be r (radius of the cylinder).
- Perimeter constraint: 2(h+r)=48⇒h+r=24⇒h=24−r.
- Volume: V(r)=πr2h=πr2(24−r)=π(24r2−r3).
- drdV=π(48r−3r2)=3πr(16−r). Setting this to zero: r=0 (rejected, degenerate) or r=16.
- Then h=24−16=8. …
- AP EAPCET 2022Set eng-2022-07-07-FN1 markMCQQ.The perimeter of a sector is constant. If its area is to be maximum, the sectorical angle should be (A) 6πc (B) 4πc (C) 4c (D) 2c
›Reveal solutionSolution
Expressing the sector's area purely in terms of its radius (using the fixed-perimeter constraint) and maximizing gives r=P/4, and back-substituting gives the optimal sectorial angle θ=2 radians.
Concept and Intuition
A circular sector's boundary consists of two straight radii and one arc, so its perimeter is P=2r+rθ. Since P is held fixed, θ is not a free variable — it is determined by r. This turns the two-variable area formula A=21r2θ into a single-variable optimisation problem in r alone.
Step-by-Step Solution
- Perimeter: P=2r+rθ (constant) ⇒θ=rP−2r.
- Area: A=21r2θ=21r2⋅rP−2r=21r(P−2r)=2Pr−r2.
- Differentiate w.r.t. r: drdA=2P−2r. Set to zero: r=4P.
- Second derivative dr2d2A=−2<0, confirming a maximum.
- Substitute back into θ=rP−2r: with r=P/4, θ=P/4P−P/2=P/4P/2=2. …
- AP EAPCET 2022Set eng-2022-07-04-AN1 markMCQQ.A closed cylinder of given volume will have least surface area when the ratio of its height and base radius is (A) 2:1 (B) 1:2 (C) 2:3 (D) 3:2
›Reveal solutionSolution
Minimising the total surface area of a closed cylinder for a fixed volume, via ordinary calculus, gives the classic result h=2r, i.e. height-to-radius ratio 2:1.
Concept and Intuition
This is a standard optimisation problem: express the surface area as a function of one variable (using the volume constraint to eliminate the other), then find where its derivative vanishes.
Step-by-Step Solution
- Volume constraint: V=πr2h⇒h=πr2V.
- Total surface area (closed cylinder, both circular ends included): S=2πr2+2πrh.
- Substitute h: S=2πr2+2πr⋅πr2V=2πr2+r2V.
- Differentiate with respect to r: drdS=4πr−r22V.
- Set to zero: 4πr=r22V⇒4πr3=2V⇒r3=2πV.
- Since V=πr2h: r3=2ππr2h=2r2h⇒r=2h⇒h=2r. …
- AP EAPCET 2021Set eng-2021-10-05-FN1 markMCQQ.A window is in the shape of a rectangle, with a semi-circle fused to one of its sides, as shown in the figure. [FIGURE] (a rectangle with a semi-circle attached to its right side, forming a window shape) If the perimeter of the window is fixed as 20 units, then its maximum area can be _____ sq. units. (A) π+4400 (B) π+420 (C) π+4100 (D) π+4200
›Reveal solutionSolution
This is a constrained optimization problem: maximize the area of a rectangle with a semicircle on one side, given a fixed perimeter of 20. The maximum area is π+4200, so the correct option is (D).
We have a window shaped like a rectangle with a semicircle attached to its right side. The semicircle’s diameter equals the height of the rectangle. The total perimeter is fixed at 20 units. We want the maximum possible area.
Why this approach works:
When a shape’s perimeter is fixed, the area is maximized by making the shape as “round” as possible — but here the shape is partly rectangular, so we need to balance the rectangle’s width and height. We’ll express area in terms of one variable, then use calculus (or completing the square) to find the maximum.
-
Define variables
Let the rectangle have width x (horizontal side) and height y (vertical side). The semicircle sits on the right side, so its diameter is y, and its radius is r=y/2.
-
Write the perimeter
The perimeter consists of:
- Left vertical side: y
- Top horizontal side: x
- Bottom horizontal side: x
- Right vertical side: y (but this is not part of the outer boundary — the semicircle replaces it)
- The curved semicircular arc: πr=π(y/2)
So total perimeter:
P=y+x+x+π2y=2x+y+2πy
Given P=20:
2x+y(1+2π)=20
- Solve for x in terms of y
2x=20−y(1+2π)⇒x=10−2y(1+2π)
Simplify:
x=10−2y−4πy
-
Write the area
Area = rectangle area + semicircle area:
- Rectangle: x⋅y
- Semicircle: 21πr2=21π(2y)2=8πy2
So:
A=xy+8πy2
Substitute x:
A=y(10−2y−4πy)+8πy2
A=10y−2y2−4πy2+8πy2
- Combine the y2 terms −4πy2+8πy2=−8πy2 So:
A=10y−2y2−8πy2
Factor y2:
A=10y−y2(21+8π)
Write 21=84, so:
A=10y−y2(84+π)
- Maximize using calculus …
-
- AP EAPCET 2023Set eng-2023-05-19-FN1 markMCQQ.If the height of a cone of greatest volume that can be inscribed in a sphere of radius R is kR, then ratio of the volume of the cone to the volume of the sphere is (A) 8:27 (B) 27:64 (C) 8:125 (D) 4:5
›Reveal solutionSolution
Standard optimization: the cone of greatest volume inscribed in a sphere has height 4R/3, and its volume is 8/27 of the sphere's.
Concept and Intuition
Setting the base circle of the cone at height h above the sphere's lowest point (with apex at that lowest point), the base radius satisfies r2=2Rh−h2 by the geometry of the circle. Maximizing V(h)=31πr2h gives the classical height 34R.
Step-by-Step Solution
- r2=R2−(h−R)2=2Rh−h2.
- V(h)=31πr2h=31π(2Rh2−h3).
- dhdV=31π(4Rh−3h2)=31πh(4R−3h); setting this to 0 (excluding h=0) gives h=34R, so k=34.
- At this h: r2=2R⋅34R−(34R)2=38R2−916R2=98R2.
- Vmax=31π⋅98R2⋅34R=8132πR3.
- Vsphere=34πR3. …
- AP EAPCET 2021Set eng-2021-08-23-AN1 markMCQQ.If the area of a circular sector of perimeter 60 m is to be maximized, then its radius must be ______ m (A) 20 (B) 15 (C) 10 (D) 5
›Reveal solutionSolution
Expressing the sector's area purely in terms of r using the fixed-perimeter constraint gives A=30r−r2, maximized at r=15.
Concept and Intuition
A circular sector's perimeter includes the two straight radii plus the arc length: P=2r+rθ. Its area is A=21r2θ. Using the fixed perimeter to eliminate θ turns this into a single-variable optimization in r.
Step-by-Step Solution
- Perimeter: 2r+rθ=60⇒θ=r60−2r.
- Area: A=21r2θ=21r2⋅r60−2r=21r(60−2r)=30r−r2.
- Maximize: drdA=30−2r. Set to 0: r=15.
- Second derivative dr2d2A=−2<0, confirming a maximum. …
- AP EAPCET 2026Set eng-2026-05-15-AN1 markMCQQ.The maximum area of the rectangle that can be inscribed in a circle of radius r is (A) 43r (B) r2 (C) 4r2 (D) 2r2
›Reveal solutionSolution
The rectangle of maximum area that fits inside a circle is always a square; working through the calculus confirms the maximum area is 2r2.
Concept and Intuition
Every rectangle inscribed in a circle has its diagonal equal to the circle's diameter, since all four corners lie on the circle and the diagonal subtends the full circle. Among rectangles with a fixed diagonal, the one with maximum area is the square — this is the geometric content behind the calculus optimization below.
Step-by-Step Solution
- Let the rectangle have half-width x and half-height y (centered at the circle's center), so its full diagonal equals the diameter 2r: x2+y2=r2.
- Area A=(2x)(2y)=4xy.
- Maximize A subject to x2+y2=r2. Parametrize x=rcosθ, y=rsinθ, so A=4r2sinθcosθ=2r2sin2θ.
- A is maximized when sin2θ=1, i.e. θ=π/4, giving Amax=2r2. …
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.If a running track of 500 ft. is to be laid out enclosing a playground, the shape of which is a rectangle with a semicircle at each end, then the length of the rectangular portion such that the area of the rectangular portion is to be maximum is (in feet). (A) 100 (B) 125 (C) 150 (D) 200
›Reveal solutionSolution
This is a classic optimization problem: maximize the rectangular area of a stadium-shaped track of fixed perimeter. Answer: x=125 ft.
Concept and Intuition
The track's total perimeter is fixed at 500 ft. The two semicircular ends together form one full circle, and the two straight sides form the rectangle's length. Expressing the rectangle's area purely in terms of its length x (using the perimeter constraint to eliminate the radius) turns this into a single-variable calculus optimization.
Step-by-Step Solution
- Let the rectangle have length x and width 2r (so the semicircles at each end have radius r).
- Total track length: two straight sides of length x each, plus two semicircles (radius r) which together make one full circle of circumference 2πr: 2x+2πr=500⇒x+πr=250⇒r=π250−x.
- Area of the rectangular portion: A=x⋅2r=2x⋅π250−x=π500x−2x2. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.