Q.The radius of an air bubble is increasing at the rate of $\frac{1}{2} \text{ cm/s}$. At what rate is the volume of the bubble increasing when the radius is $1 \text{ cm}$?

Showing the 12 most recent of 17 on this concept.

1. AP EAPCET 2025Set eng-2025-05-24-FN1 markMCQ
   Q.If the surface area of a spherical bubble is increasing at the rate of 4 sq.cm/sec, then the rate of change in its volume (in cubic cm/sec) when its radius is 8 cms is (A) $8$ (B) $12$ (C) $15$ (D) $16$

   ›Reveal solutionSolution

   A related-rates problem: given $\dfrac{dS}{dt}$, find $\dfrac{dV}{dt}$ by eliminating $\dfrac{dr}{dt}$ through the common variable $r$. Answer: $16$ cubic cm/sec.

   Concept and Intuition

   Both surface area $S$ and volume $V$ of a sphere depend on the single variable $r$ (radius), which itself changes with time. The strategy in any related-rates problem is: express both quantities in terms of the shared variable, differentiate each with respect to time using the chain rule, and then eliminate the unknown rate ($\dfrac{dr}{dt}$ here) between the two equations.

   Step-by-Step Solution

   1. Surface area: $S=4\pi r^2$. Differentiating w.r.t. $t$: $\dfrac{dS}{dt}=8\pi r\,\dfrac{dr}{dt}$.
   2. We're given $\dfrac{dS}{dt}=4$, so $8\pi r\,\dfrac{dr}{dt}=4 \Rightarrow \dfrac{dr}{dt}=\dfrac{4}{8\pi r}=\dfrac{1}{2\pi r}$.
   3. Volume: $V=\dfrac43\pi r^3$. Differentiating w.r.t. $t$: $\dfrac{dV}{dt}=4\pi r^2\,\dfrac{dr}{dt}$.
   4. Substitute $\dfrac{dr}{dt}$ from step 2: …

   🔒 Start your 14-day free trial to see the full solution →
2. AP EAPCET 2021Set eng-2021-08-23-AN1 markMCQ
   Q.The volume of a spherical ball is increasing at a rate of $4\pi \text{ cm}^3.\text{s}^{-1}$. The rate at which its radius increases, when its volume is $288\pi \text{ cm}^3$, is ______ $\text{cm}.\text{s}^{-1}$. (A) $\dfrac{1}{6}$ (B) $\dfrac{1}{36}$ (C) $\dfrac{1}{9}$ (D) $\dfrac{1}{24}$

   ›Reveal solutionSolution

   Related rates on $V=\tfrac43\pi r^3$ give $\dfrac{dr}{dt}=\dfrac{1}{r^2}$, and at the given volume $r=6$, so $\dfrac{dr}{dt}=\dfrac1{36}$.

   Concept and Intuition

   This is a classic related-rates problem: differentiate the volume formula with respect to time using the chain rule, then substitute the known rate and the radius at the instant of interest (found from the given volume).

   Step-by-Step Solution

   1. $V=\dfrac43\pi r^3$.
   2. Differentiate w.r.t. time: $\dfrac{dV}{dt}=4\pi r^2\dfrac{dr}{dt}$.
   3. Given $\dfrac{dV}{dt}=4\pi$: $4\pi=4\pi r^2\dfrac{dr}{dt} \Rightarrow \dfrac{dr}{dt}=\dfrac{1}{r^2}$.
   4. Find $r$ when $V=288\pi$: $\dfrac43\pi r^3=288\pi \Rightarrow r^3=216 \Rightarrow r=6$. …

   🔒 Start your 14-day free trial to see the full solution →
3. AP EAPCET 2025Set eng-2025-05-23-FN1 markMCQ
   Q.If the volume of a sphere is increasing at the rate of 12 c.c./sec, then the rate (in sq. cm/sec) at which its surface area is increasing, when the diameter of the sphere is 12 cm is (A) 2 (B) 3 (C) 4 (D) 6

   ›Reveal solutionSolution

   This is a related-rates problem: given how fast volume grows, find how fast surface area grows at a specific radius; the answer is $4\text{ cm}^2/\text{s}$.

   Concept and Intuition

   Both $V$ and $S$ of a sphere depend only on $r$, so differentiating each with respect to time and eliminating $\frac{dr}{dt}$ (found from the volume-rate condition) gives the surface-area rate.

   Step-by-Step Solution

   1. $V=\dfrac43\pi r^3$, so $\dfrac{dV}{dt}=4\pi r^2\dfrac{dr}{dt}$.
   2. Given $\dfrac{dV}{dt}=12$ and diameter $=12\Rightarrow r=6$: $12=4\pi(36)\dfrac{dr}{dt}\Rightarrow \dfrac{dr}{dt}=\dfrac{12}{144\pi}=\dfrac{1}{12\pi}$.
   3. $S=4\pi r^2\Rightarrow \dfrac{dS}{dt}=8\pi r\dfrac{dr}{dt}$. …

   🔒 Start your 14-day free trial to see the full solution →
4. AP EAPCET 2021Set eng-2021-08-20-AN1 markMCQ
   Q.The volume of a spherical balloon is increasing at the rate of $30\ cc$ per minute. Find the rate of change of surface area of the balloon, when its radius is $6\ cm$. (A) $5\ cm^2.min^{-1}$ (B) $30\ cm^2.min^{-1}$ (C) $10\ cm^2.min^{-1}$ (D) $20\ cm^2.min^{-1}$

   ›Reveal solutionSolution

   A standard related-rates chain: volume rate → radius rate → surface-area rate. The answer is $10\ cm^2/\text{min}$.

   Concept and Intuition

   Both $V$ and $S$ of a sphere depend only on $r$, so their rates of change are linked through $dr/dt$ via the chain rule. First use the given $dV/dt$ to find $dr/dt$ at the specified radius, then plug that into $dS/dt$.

   Step-by-Step Solution

   1. $V=\dfrac43\pi r^3\Rightarrow\dfrac{dV}{dt}=4\pi r^2\dfrac{dr}{dt}$.
   2. Given $\dfrac{dV}{dt}=30\ cc/min$ and $r=6$ cm: $30=4\pi(6)^2\dfrac{dr}{dt}=144\pi\dfrac{dr}{dt}$.
   3. $\dfrac{dr}{dt}=\dfrac{30}{144\pi}=\dfrac{5}{24\pi}$ cm/min.
   4. $S=4\pi r^2\Rightarrow\dfrac{dS}{dt}=8\pi r\dfrac{dr}{dt}$. …

   🔒 Start your 14-day free trial to see the full solution →
5. AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQ
   Q.If a cylindrical tank of radius 3 m is filled with water at the rate of $\dfrac{3}{2}$ $m^3$/sec, then the rate of change of its water level in (m/sec) is (A) $\dfrac{1}{3\pi}$ (B) $\dfrac{1}{2\pi}$ (C) $\dfrac{1}{\pi}$ (D) $\dfrac{1}{6\pi}$

   ›Reveal solutionSolution

   This tests related rates for a cylinder of fixed radius; the water level rises at $\dfrac{1}{6\pi}$ m/s.

   Concept and Intuition

   Since the radius doesn't change as the tank fills, the volume $V=\pi r^2h$ is a function of $h$ alone (with $r$ a constant), so differentiating with respect to time directly links $dV/dt$ to $dh/dt$ through the constant cross-sectional area $\pi r^2$.

   Step-by-Step Solution

   1. $V = \pi r^2 h$, with $r=3$ constant, so $V=9\pi h$.
   2. Differentiate w.r.t. time: $\dfrac{dV}{dt} = 9\pi\dfrac{dh}{dt}$. …

   🔒 Start your 14-day free trial to see the full solution →
6. AP EAPCET 2026Set eng-2026-05-18-AN1 markMCQ
   Q.If the rate of increase in the surface area of a cube is $6\ sq.cm./sec$, then the rate of increase in its volume (in $c.c./sec$), when the length of its edge is $12\ cm$, is (A) $6$ (B) $12$ (C) $18$ (D) $9$

   ›Reveal solutionSolution

   A related-rates problem: convert the given rate of change of surface area into the rate of change of the edge length, then into the rate of change of volume.

   Concept and Intuition

   Both surface area and volume of a cube are functions of the single variable $a$ (the edge length), so differentiating each with respect to time and using the chain rule links their rates through $da/dt$ — the one quantity actually changing independently.

   Step-by-Step Solution

   1. Surface area: $S=6a^2\Rightarrow\dfrac{dS}{dt}=12a\dfrac{da}{dt}$.
   2. Given $\dfrac{dS}{dt}=6$: $12a\dfrac{da}{dt}=6\Rightarrow\dfrac{da}{dt}=\dfrac{1}{2a}$.
   3. Volume: $V=a^3\Rightarrow\dfrac{dV}{dt}=3a^2\dfrac{da}{dt}$. …

   🔒 Start your 14-day free trial to see the full solution →
7. AP EAPCET 2021Set eng-2021-08-20-AN1 markMCQ
   Q.A spherical iron ball $10\ cm$ in radius is coated with a layer of ice of uniform thickness, which melts at a rate of $50\ cm^3/min$. When the thickness of the ice is $15\ cm$, the rate at which the thickness of ice decreases is ______ $cm/min$ (A) $\dfrac{5}{6\pi}$ (B) $\dfrac{1}{54\pi}$ (C) $\dfrac{1}{18\pi}$ (D) $\dfrac{1}{36\pi}$

   ›Reveal solutionSolution

   This is a related-rates problem: only the outer radius of the ice matters for relating the rate of volume loss to the rate of thickness loss. The answer is $\dfrac{1}{18\pi}$ cm/min.

   Concept and Intuition

   The iron ball's own radius (10 cm) is fixed and drops out of the derivative — only the total outer radius $R=10+x$, where $x$ is the ice thickness, matters, since $V_{ice}=\tfrac43\pi R^3-\tfrac43\pi(10)^3$ and the constant term vanishes on differentiating. This reduces the problem to the standard "rate of change of a sphere's volume vs. its radius" relation, $dV/dt=4\pi R^2\,dR/dt$.

   Step-by-Step Solution

   1. Let $x(t)$ be the ice thickness at time $t$; outer radius $R=10+x$.
   2. $V_{ice}=\dfrac43\pi(10+x)^3-\dfrac43\pi(10)^3$.
   3. $\dfrac{dV_{ice}}{dt}=4\pi(10+x)^2\dfrac{dx}{dt}$ (the constant term differentiates to zero).
   4. The ice melts (volume decreases) at $50\text{ cm}^3/\text{min}$, so $\dfrac{dV_{ice}}{dt}=-50$. …

   🔒 Start your 14-day free trial to see the full solution →
8. AP EAPCET 2021Set eng-2021-08-20-FN1 markMCQ
   Q.The diameter and altitude of a right circular cone, at a certain instant, were found to be $10\ cm$ and $20\ cm$ respectively. If its diameter is increasing at a rate of $2\ cm/s$, then at what rate must its altitude change, in order to keep its volume constant? (A) $4\ cm/s$ (B) $6\ cm/s$ (C) $-4\ cm/s$ (D) $-8\ cm/s$

   ›Reveal solutionSolution

   This tests related rates: differentiating the volume of a cone with respect to time and setting the total rate of change to zero to keep volume constant. Answer: $-8$ cm/s.

   Concept and Intuition

   When a quantity built from several changing variables must stay constant, differentiate the formula with respect to time and set the total derivative to zero — this links the individual rates of change together.

   Step-by-Step Solution

   1. Diameter $=10$ cm $\Rightarrow$ radius $r=5$ cm; height $h=20$ cm.
   2. Diameter increasing at $2$ cm/s $\Rightarrow \dfrac{d(2r)}{dt}=2 \Rightarrow \dfrac{dr}{dt}=1$ cm/s.
   3. Volume: $V = \dfrac13\pi r^2 h$. Differentiate with respect to $t$: $\dfrac{dV}{dt} = \dfrac13\pi\left(2rh\dfrac{dr}{dt} + r^2\dfrac{dh}{dt}\right)$.
   4. For constant volume, $\dfrac{dV}{dt}=0 \Rightarrow 2rh\dfrac{dr}{dt} + r^2\dfrac{dh}{dt} = 0$. …

   🔒 Start your 14-day free trial to see the full solution →
9. AP EAPCET 2026Set eng-2026-05-14-FN1 markMCQ
   Q.The surface area of a sphere is $49\pi\ sq.cm$. If it is increased by $0.016\ sq.cm$, then the approximate increase in its volume (in $c.c.$) is (A) $0.07$ (B) $0.04$ (C) $0.032$ (D) $0.028$

   ›Reveal solutionSolution

   Using differentials to connect a small change in surface area to the corresponding small change in volume, via the shared variable $r$, gives an approximate volume increase of $0.028$ c.c.

   Concept and Intuition

   When a small change in one geometric quantity (surface area) causes a small change in another (volume), and both depend on a common variable ($r$), we can relate their differentials directly: $dS = 8\pi r\,dr$ and $dV = 4\pi r^2\,dr$ share the same $dr$, so we solve for $dr$ from the given $dS$ and substitute into the $dV$ formula — this is the standard "approximate change" technique using derivatives.

   Step-by-Step Solution

   1. Surface area of sphere: $S=4\pi r^2 = 49\pi \Rightarrow r^2 = \dfrac{49}{4} \Rightarrow r = \dfrac72 = 3.5\ \text{cm}$.
   2. Differentiate $S=4\pi r^2$: $dS = 8\pi r\, dr$.
   3. Given $dS = 0.016$, and $r=3.5$: $dr = \dfrac{0.016}{8\pi(3.5)} = \dfrac{0.016}{28\pi}$.
   4. Volume: $V = \dfrac43\pi r^3$. Differentiate: $dV = 4\pi r^2\, dr$.
   5. $r^2 = 12.25$, so $dV = 4\pi(12.25)\,dr = 49\pi\, dr$. …

   🔒 Start your 14-day free trial to see the full solution →
10. AP EAPCET 2026Set eng-2026-05-14-FN1 markMCQ
    Q.If the vertical angle of a cone is $60^\circ$ and the rate of change of its total surface area is $2\sqrt{3}\ cm^2/sec$, then the rate of change of its volume (in $cm^3/sec$) when its radius is $5\ cm$, is (A) $15$ (B) $10$ (C) $5$ (D) $9$

    ›Reveal solutionSolution

    A related-rates problem: using the $60°$ vertical angle to fix $h$ and slant height $l$ in terms of $r$, then chaining $\dfrac{dS}{dt}\to\dfrac{dr}{dt}\to\dfrac{dV}{dt}$ gives $5\ \text{cm}^3/\text{sec}$.

    Concept and Intuition

    When a cone's vertical (apex) angle is fixed, its shape stays similar as it grows — radius and height stay in a fixed ratio determined by the semi-vertical angle. This lets us express both surface area and volume purely in terms of $r$, so a single related-rates chain (through $dr/dt$) connects the given rate of surface-area change to the unknown rate of volume change.

    Step-by-Step Solution

    1. Vertical angle $=60°$, so semi-vertical angle $\alpha=30°$. In the cone's cross-section, $\tan\alpha = r/h$, so $r = h\tan30° = h/\sqrt3$, i.e. $h = r\sqrt3$.
    2. Slant height: $l = \sqrt{r^2+h^2} = \sqrt{r^2+3r^2} = \sqrt{4r^2} = 2r$.
    3. Total surface area: $S = \pi r^2 + \pi r l = \pi r^2 + \pi r(2r) = 3\pi r^2$.
    4. Differentiate: $\dfrac{dS}{dt} = 6\pi r\dfrac{dr}{dt}$.
    5. Given $\dfrac{dS}{dt}=2\sqrt3$ and $r=5$: $2\sqrt3 = 6\pi(5)\dfrac{dr}{dt} = 30\pi\dfrac{dr}{dt}$, so $\dfrac{dr}{dt} = \dfrac{2\sqrt3}{30\pi} = \dfrac{\sqrt3}{15\pi}$.
    6. Volume: $V = \dfrac13\pi r^2 h = \dfrac13\pi r^2(r\sqrt3) = \dfrac{\pi r^3}{\sqrt3}$. …

    🔒 Start your 14-day free trial to see the full solution →
11. AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQ
    Q.A point is moving on the curve $y=x^3-3x^2+2x-1$ and the y-coordinate of the point is increasing at the rate of 6 units per second. When the point is at $(2,-1)$, the rate of change of x-coordinate of the point is (A) 3 (B) $\dfrac{1}{2}$ (C) $-\dfrac{1}{2}$ (D) $-3$

    ›Reveal solutionSolution

    A related-rates problem: knowing $dy/dt$ and the curve's slope at the given point lets us solve directly for $dx/dt$. The answer is $3$.

    Concept and Intuition

    For a point moving along $y=f(x)$, the rates of change of $x$ and $y$ with respect to time are linked through the chain rule $\dfrac{dy}{dt}=f'(x)\dfrac{dx}{dt}$ — the curve's local slope is exactly the conversion factor between the two rates at that instant.

    Step-by-Step Solution

    1. $y=x^3-3x^2+2x-1\Rightarrow\dfrac{dy}{dx}=3x^2-6x+2$.
    2. At the point $(2,-1)$: $\dfrac{dy}{dx}=3(4)-6(2)+2=12-12+2=2$. …

    🔒 Start your 14-day free trial to see the full solution →
12. AP EAPCET 2021Set eng-2021-08-19-AN1 markMCQ
    Q.Let '$x$' and '$y$' be the sides of two squares such that $y=x-x^2$. The rate of change of area of the second square with respect to area of the first square is ______. (A) $1-3x+2x^2$ (B) $1+3x-2x^2$ (C) $2x$ (D) $x+2x^3-3x^2$

    ›Reveal solutionSolution

    Use the chain rule to compute a derivative of one area with respect to another, both parametrized by $x$. Answer: $1-3x+2x^2$.

    Concept and Intuition

    "Rate of change of Area2 w.r.t. Area1" means $\dfrac{d(\text{Area2})}{d(\text{Area1})}$, which by the chain rule equals $\dfrac{d(\text{Area2})/dx}{d(\text{Area1})/dx}$ since both areas are functions of the common parameter $x$.

    Step-by-Step Solution

    1. Area1 $=x^2\Rightarrow\dfrac{d(\text{Area1})}{dx}=2x$.
    2. Area2 $=y^2=(x-x^2)^2\Rightarrow\dfrac{d(\text{Area2})}{dx}=2(x-x^2)(1-2x)$. …

    🔒 Start your 14-day free trial to see the full solution →