Q.A stone is dropped into a quiet lake and waves move in circles at the speed of 5 cm/s. At the instant when the radius of the circular wave is 8 cm, how fast is the enclosed area increasing?
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Related Rates
Related Rates
The idea: quantities that change together
Many real situations involve two or more quantities that all vary with time, linked by a fixed relationship. Inflate a balloon and its radius and volume both grow; slide a ladder down a wall and the top's height and the foot's distance both change. A related-rates problem gives you the rate at which one quantity is changing and asks for the rate of another, at some instant.
The key insight: if the quantities are tied together by an equation, then their rates are tied together too. We uncover that link by differentiating the equation with respect to time t.
The core mechanism: differentiate with respect to time
Every variable is a function of t, so differentiating brings in the chain rule — each variable's derivative picks up a factor of its own rate. For example, if the volume of a sphere is V=34πr3, then differentiating both sides with respect to t gives
dtdV=4πr2dtdr.
This single equation connects the rate the volume grows, dtdV, to the rate the radius grows, dtdr. Knowing one (and the current r) gives the other.
The standard procedure
Solving a related-rates problem
- Identify the quantities that change with time and the rate you want.
- Write an equation relating those quantities (geometry, a formula, etc.).
- Differentiate both sides with respect to t, treating every variable as a function of t.
- Substitute the known values and the known rate at the given instant.
- Solve for the unknown rate.
Worked example
Air is pumped into a spherical balloon at dtdV=100 cm3/s. How fast is the radius increasing when r=5 cm?
From dtdV=4πr2dtdr, substitute dtdV=100 and r=5:
100=4π(5)2dtdr=100πdtdr⟹dtdr=π1 cm/s. …
Concept: Related Rates — we relate the rate of change of the radius to the rate of change of the area using differentiation with respect to time.
Step 1: Area of a circle: A=πr2. Differentiate both sides with respect to time t:
dtdA=2πr⋅dtdr. …
The area enclosed by a circular wave expands at a rate proportional to the radius times the wave speed. Using related rates, we find that when r=8 cm and dtdr=5 cm/s, the area increases at 80π cm²/s.
This is a classic related rates problem. The key idea: when two quantities change with time and are linked by a formula, we differentiate that formula with respect to time to find how fast one changes given the other.
Here, the wave spreads as a circle whose radius grows at a constant speed. The area enclosed depends on the radius, so the rate of area increase depends on both the current radius and how fast the radius is growing.
-
Identify the variables and given rates.
Let r be the radius (in cm) of the circular wave at time t seconds.
The wave speed is dtdr=5 cm/s (constant).
We want dtdA when r=8 cm, where A is the enclosed area.
-
Write the relationship between area and radius.
For a circle, A=πr2.
-
Differentiate both sides with respect to time t.
Since A and r are functions of t, we use the chain rule:
dtdA=dtd(πr2)=2πr⋅dtdr.
This step is the heart of related rates: differentiate the formula as if r were a function, then multiply by dtdr. No need to solve for r(t) explicitly — we only need the instantaneous values. …
Method: Translating a Word Problem into a Related-Rates Setup
Word problems describing a physical scenario (a spreading wave, an inflating balloon, a growing shadow) first need to be converted into the standard geometric relation before the calculus begins.
Steps
Step 1: Identify the geometric shape and name its variables
Read the physical description and recognize the underlying shape — here, the spreading ripple is a circle, so let r be its radius and A its enclosed area, both functions of time.
Step 2: Identify which rate is given and which is asked for
"Waves move ... at the speed of 5 cm/s" is the given rate of the radius, dtdr; "how fast is the area increasing" is the rate being asked for, dtdA. …
Common Mistakes
Mistake 1: Misreading the wave speed as the rate of change of area instead of radius
The "5 cm/s" describes how fast the radius of the circular wavefront grows, not directly the area — plugging it straight into a formula for dtdA without first relating A and r skips the actual related-rates step.
Mistake 2: Substituting the radius before differentiating …
Showing the 12 most recent of 17 on this concept.
- AP EAPCET 2025Set eng-2025-05-24-FN1 markMCQQ.If the surface area of a spherical bubble is increasing at the rate of 4 sq.cm/sec, then the rate of change in its volume (in cubic cm/sec) when its radius is 8 cms is (A) 8 (B) 12 (C) 15 (D) 16
›Reveal solutionSolution
A related-rates problem: given dtdS, find dtdV by eliminating dtdr through the common variable r. Answer: 16 cubic cm/sec.
Concept and Intuition
Both surface area S and volume V of a sphere depend on the single variable r (radius), which itself changes with time. The strategy in any related-rates problem is: express both quantities in terms of the shared variable, differentiate each with respect to time using the chain rule, and then eliminate the unknown rate (dtdr here) between the two equations.
Step-by-Step Solution
- Surface area: S=4πr2. Differentiating w.r.t. t: dtdS=8πrdtdr.
- We're given dtdS=4, so 8πrdtdr=4⇒dtdr=8πr4=2πr1.
- Volume: V=34πr3. Differentiating w.r.t. t: dtdV=4πr2dtdr.
- Substitute dtdr from step 2: …
- AP EAPCET 2024Set eng-2024-05-23-FN1 markMCQQ.A is a point on the circle with radius 8 and centre at O. A particle P is moving on the circumference of the circle starting from A. M is the foot of the perpendicular from P on OA and ∠POM=θ. When OM=4 and dtdθ=6 radians/sec, then the rate of change of PM is (in units/sec) (A) 243 (B) 24 (C) 153 (D) 483
›Reveal solutionSolution
M is the foot of the perpendicular from P to line OA, so OM=OPcosθ and PM=OPsinθ in the right triangle OMP; differentiate PM with respect to time.
Concept and Intuition
As P moves around the circle, the right triangle OMP (right-angled at M) has hypotenuse OP=8 (the radius) fixed, and angle θ=∠POM varying with time. So OM and PM are both simple trig functions of θ, and their time-rates follow directly by the chain rule using θ˙.
Step-by-Step Solution
- In right triangle OMP (right angle at M): OM=OPcosθ=8cosθ and PM=OPsinθ=8sinθ.
- Given OM=4: 8cosθ=4⇒cosθ=21⇒θ=60∘, and sinθ=23.
- Differentiate PM=8sinθ with respect to time: dtd(PM)=8cosθ⋅dtdθ. …
- AP EAPCET 2026Set eng-2026-05-14-FN1 markMCQQ.If the vertical angle of a cone is 60∘ and the rate of change of its total surface area is 23 cm2/sec, then the rate of change of its volume (in cm3/sec) when its radius is 5 cm, is (A) 15 (B) 10 (C) 5 (D) 9
›Reveal solutionSolution
A related-rates problem: using the 60° vertical angle to fix h and slant height l in terms of r, then chaining dtdS→dtdr→dtdV gives 5 cm3/sec.
Concept and Intuition
When a cone's vertical (apex) angle is fixed, its shape stays similar as it grows — radius and height stay in a fixed ratio determined by the semi-vertical angle. This lets us express both surface area and volume purely in terms of r, so a single related-rates chain (through dr/dt) connects the given rate of surface-area change to the unknown rate of volume change.
Step-by-Step Solution
- Vertical angle =60°, so semi-vertical angle α=30°. In the cone's cross-section, tanα=r/h, so r=htan30°=h/3, i.e. h=r3.
- Slant height: l=r2+h2=r2+3r2=4r2=2r.
- Total surface area: S=πr2+πrl=πr2+πr(2r)=3πr2.
- Differentiate: dtdS=6πrdtdr.
- Given dtdS=23 and r=5: 23=6π(5)dtdr=30πdtdr, so dtdr=30π23=15π3.
- Volume: V=31πr2h=31πr2(r3)=3πr3. …
- AP EAPCET 2021Set eng-2021-08-23-AN1 markMCQQ.The volume of a spherical ball is increasing at a rate of 4π cm3.s−1. The rate at which its radius increases, when its volume is 288π cm3, is ______ cm.s−1. (A) 61 (B) 361 (C) 91 (D) 241
›Reveal solutionSolution
Related rates on V=34πr3 give dtdr=r21, and at the given volume r=6, so dtdr=361.
Concept and Intuition
This is a classic related-rates problem: differentiate the volume formula with respect to time using the chain rule, then substitute the known rate and the radius at the instant of interest (found from the given volume).
Step-by-Step Solution
- V=34πr3.
- Differentiate w.r.t. time: dtdV=4πr2dtdr.
- Given dtdV=4π: 4π=4πr2dtdr⇒dtdr=r21.
- Find r when V=288π: 34πr3=288π⇒r3=216⇒r=6. …
- AP EAPCET 2021Set eng-2021-08-20-AN1 markMCQQ.The volume of a spherical balloon is increasing at the rate of 30 cc per minute. Find the rate of change of surface area of the balloon, when its radius is 6 cm. (A) 5 cm2.min−1 (B) 30 cm2.min−1 (C) 10 cm2.min−1 (D) 20 cm2.min−1
›Reveal solutionSolution
A standard related-rates chain: volume rate → radius rate → surface-area rate. The answer is 10 cm2/min.
Concept and Intuition
Both V and S of a sphere depend only on r, so their rates of change are linked through dr/dt via the chain rule. First use the given dV/dt to find dr/dt at the specified radius, then plug that into dS/dt.
Step-by-Step Solution
- V=34πr3⇒dtdV=4πr2dtdr.
- Given dtdV=30 cc/min and r=6 cm: 30=4π(6)2dtdr=144πdtdr.
- dtdr=144π30=24π5 cm/min.
- S=4πr2⇒dtdS=8πrdtdr. …
- AP EAPCET 2025Set eng-2025-05-23-FN1 markMCQQ.If the volume of a sphere is increasing at the rate of 12 c.c./sec, then the rate (in sq. cm/sec) at which its surface area is increasing, when the diameter of the sphere is 12 cm is (A) 2 (B) 3 (C) 4 (D) 6
›Reveal solutionSolution
This is a related-rates problem: given how fast volume grows, find how fast surface area grows at a specific radius; the answer is 4 cm2/s.
Concept and Intuition
Both V and S of a sphere depend only on r, so differentiating each with respect to time and eliminating dtdr (found from the volume-rate condition) gives the surface-area rate.
Step-by-Step Solution
- V=34πr3, so dtdV=4πr2dtdr.
- Given dtdV=12 and diameter =12⇒r=6: 12=4π(36)dtdr⇒dtdr=144π12=12π1.
- S=4πr2⇒dtdS=8πrdtdr. …
- AP EAPCET 2021Set eng-2021-08-20-FN1 markMCQQ.The diameter and altitude of a right circular cone, at a certain instant, were found to be 10 cm and 20 cm respectively. If its diameter is increasing at a rate of 2 cm/s, then at what rate must its altitude change, in order to keep its volume constant? (A) 4 cm/s (B) 6 cm/s (C) −4 cm/s (D) −8 cm/s
›Reveal solutionSolution
This tests related rates: differentiating the volume of a cone with respect to time and setting the total rate of change to zero to keep volume constant. Answer: −8 cm/s.
Concept and Intuition
When a quantity built from several changing variables must stay constant, differentiate the formula with respect to time and set the total derivative to zero — this links the individual rates of change together.
Step-by-Step Solution
- Diameter =10 cm ⇒ radius r=5 cm; height h=20 cm.
- Diameter increasing at 2 cm/s ⇒dtd(2r)=2⇒dtdr=1 cm/s.
- Volume: V=31πr2h. Differentiate with respect to t: dtdV=31π(2rhdtdr+r2dtdh).
- For constant volume, dtdV=0⇒2rhdtdr+r2dtdh=0. …
- AP EAPCET 2021Set eng-2021-08-20-AN1 markMCQQ.A spherical iron ball 10 cm in radius is coated with a layer of ice of uniform thickness, which melts at a rate of 50 cm3/min. When the thickness of the ice is 15 cm, the rate at which the thickness of ice decreases is ______ cm/min (A) 6π5 (B) 54π1 (C) 18π1 (D) 36π1
›Reveal solutionSolution
This is a related-rates problem: only the outer radius of the ice matters for relating the rate of volume loss to the rate of thickness loss. The answer is 18π1 cm/min.
Concept and Intuition
The iron ball's own radius (10 cm) is fixed and drops out of the derivative — only the total outer radius R=10+x, where x is the ice thickness, matters, since Vice=34πR3−34π(10)3 and the constant term vanishes on differentiating. This reduces the problem to the standard "rate of change of a sphere's volume vs. its radius" relation, dV/dt=4πR2dR/dt.
Step-by-Step Solution
- Let x(t) be the ice thickness at time t; outer radius R=10+x.
- Vice=34π(10+x)3−34π(10)3.
- dtdVice=4π(10+x)2dtdx (the constant term differentiates to zero).
- The ice melts (volume decreases) at 50 cm3/min, so dtdVice=−50. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If a cylindrical tank of radius 3 m is filled with water at the rate of 23 m3/sec, then the rate of change of its water level in (m/sec) is (A) 3π1 (B) 2π1 (C) π1 (D) 6π1
›Reveal solutionSolution
This tests related rates for a cylinder of fixed radius; the water level rises at 6π1 m/s.
Concept and Intuition
Since the radius doesn't change as the tank fills, the volume V=πr2h is a function of h alone (with r a constant), so differentiating with respect to time directly links dV/dt to dh/dt through the constant cross-sectional area πr2.
Step-by-Step Solution
- V=πr2h, with r=3 constant, so V=9πh.
- Differentiate w.r.t. time: dtdV=9πdtdh. …
- AP EAPCET 2026Set eng-2026-05-18-AN1 markMCQQ.If the rate of increase in the surface area of a cube is 6 sq.cm./sec, then the rate of increase in its volume (in c.c./sec), when the length of its edge is 12 cm, is (A) 6 (B) 12 (C) 18 (D) 9
›Reveal solutionSolution
A related-rates problem: convert the given rate of change of surface area into the rate of change of the edge length, then into the rate of change of volume.
Concept and Intuition
Both surface area and volume of a cube are functions of the single variable a (the edge length), so differentiating each with respect to time and using the chain rule links their rates through da/dt — the one quantity actually changing independently.
Step-by-Step Solution
- Surface area: S=6a2⇒dtdS=12adtda.
- Given dtdS=6: 12adtda=6⇒dtda=2a1.
- Volume: V=a3⇒dtdV=3a2dtda. …
- AP EAPCET 2021Set eng-2021-10-05-FN1 markMCQQ.A ladder 5 m long is leaning against a wall. If the top of the ladder slides downwards at a rate of 10 cm.sec−1, then the rate at which the angle between the floor and the ladder decreases, when the lower end of ladder is 2 m from the wall, is _____ radian.sec−1 (A) 101 (B) 201 (C) 20 (D) 10
›Reveal solutionSolution
This is a related-rates problem: relate x,y,θ via the ladder's fixed length, then differentiate twice (once for x,y, once for θ) using the chain rule. The answer is (B).
Concept and Intuition
As the top of the ladder slides down, the angle it makes with the floor decreases. Using x=5cosθ directly (with x = distance of foot from wall) lets us relate dy/dt to dθ/dt in one clean step.
Step-by-Step Solution
- Let x = horizontal distance of foot from wall, y = height of top on the wall, θ = angle between floor and ladder. Then x=5cosθ, y=5sinθ.
- Given: dtdy=−10 cm/s=−0.1 m/s (height decreasing), at the instant x=2 m.
- cosθ=5x=52.
- From y=5sinθ: dtdy=5cosθdtdθ.
- Substitute: −0.1=5(52)dtdθ=2dtdθ⇒dtdθ=−0.05=−201 rad/s.
- The negative sign confirms θ is decreasing; its rate of decrease is 201 rad/s. …
- AP EAPCET 2024Set eng-2024-05-22-AN1 markMCQQ.If a man of height 1.8 mt. is walking away from the foot of a light pole of height 6 mt. with a speed of 7 km per hour on a straight horizontal road opposite to the pole, then the rate of change of the length of his shadow is (in kmph) (A) 7 (B) 5 (C) 3 (D) 2
›Reveal solutionSolution
Similar triangles link shadow length to distance walked; the shadow grows at 3 kmph.
Concept and Intuition
The tip of the shadow, the top of the pole, and the top of the man's head are collinear (that's what casts the shadow). This gives a similar-triangles relationship between the man's distance from the pole and his shadow's length, which can be differentiated with respect to time (related rates).
Step-by-Step Solution
- Let x = distance of the man from the pole, s = length of his shadow. The tip of the shadow is at distance x+s from the pole.
- Similar triangles (pole-to-shadow-tip vs man-to-shadow-tip): x+spole height=sman height⇒x+s6=s1.8.
- Cross-multiply: 6s=1.8(x+s)=1.8x+1.8s⇒4.2s=1.8x⇒s=4.21.8x=73x. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.