Q.Show that the function f given by f(x)={x3+3,1,if x=0if x=0 is not continuous at x=0.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity At A Point — A function f is continuous at x=a iff limx→af(x)=f(a).
Step 1: Compute the limit as x→0. For x=0, f(x)=x3+3, so
limx→0f(x)=limx→0(x3+3)=0+3=3.
Step 2: The function value at x=0 is given directly: f(0)=1. …
The function is not continuous at x=0 because the limit as x→0 is 3, but the function value at 0 is 1 — they are not equal.
We need to check continuity at a single point. For a function f to be continuous at x=a, three things must hold:
- f(a) is defined.
- limx→af(x) exists.
- limx→af(x)=f(a).
If any one of these fails, the function is discontinuous at that point. Here, the function is defined piecewise: it behaves like x3+3 everywhere except at x=0, where it is given a different value, 1. That mismatch is the red flag.
Let’s check each condition.
-
f(0) is defined.
The definition says f(0)=1. So condition 1 is satisfied.
-
Does limx→0f(x) exist?
For x=0, f(x)=x3+3. As x approaches 0, x3 approaches 0, so x3+3 approaches 3.
Since the function is given by the same expression x3+3 for all x=0, the left-hand limit and right-hand limit are both 3.
Therefore, x→0limf(x)=3.
-
Does limx→0f(x) equal f(0)? …
Method: Proving Discontinuity When a Point Is Redefined
This method is used when a piecewise function follows one formula almost everywhere but is deliberately assigned a different, isolated value at one point — the goal is to show the continuity definition fails there.
Steps
Step 1: Identify the "generic" formula and the "exceptional" value
Separate the function into the rule that applies for x=a and the standalone value assigned at x=a itself.
Step 2: Compute the limit using the generic formula
Since the one-sided behaviour near a is governed entirely by the generic piece (the exceptional value at the single point a doesn't affect the limit), compute
limx→af(x)
using ordinary substitution into the generic formula — the surrounding formula (often a polynomial) is typically continuous, so this limit exists and equals a direct substitution.
Step 3: Read off the function's actual value at the point …
Common Mistakes
Mistake 1: Concluding continuity just because f(0) is defined
Why it's wrong: a function being defined at a point is only one of the three continuity conditions — it says nothing about whether the limit exists or matches that value. Correct approach: always compute limx→0f(x) separately and compare it with f(0) before concluding anything.
Mistake 2: Substituting x=0 into the "x=0" formula to find f(0) …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2024Set eng-2024-05-21-AN1 markMCQQ.If the function f(x)=x1+x−1 is continuous at x=0 then f(0)= (A) −21 (B) 31 (C) 21 (D) −31
›Reveal solutionSolution
Rationalizing the numerator turns the 0/0 form into a simple limit, which must equal f(0) for continuity.
Concept and Intuition
For f to be continuous at x=0, we need f(0)=x→0limf(x). Since the given formula for f(x) is 0/0 at x=0, we must simplify it algebraically first.
Step-by-Step Solution
- x1+x−1=x(1+x+1)(1+x−1)(1+x+1)=x(1+x+1)(1+x)−1=x(1+x+1)x=1+x+11.
- As x→0: 1+11=21. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2023Set eng-2023-05-18-AN1 markMCQQ.Let Sn=1+3x+9x2+27x3+…n terms and −31<x<31. If limn→∞Sn=f(x), then f(x) is discontinuous at the point x= (A) 0 (B) 31 (C) 1 (D) −1
›Reveal solutionSolution
The infinite geometric series sums to f(x)=1/(1−3x) on (−1/3,1/3), and this function has an infinite discontinuity exactly at x=1/3, the edge of the interval where the series stops converging.
Concept and Intuition
An infinite geometric series 1+r+r2+… converges to 1−r1 only when ∣r∣<1; as r→1 this sum diverges to infinity. Here r=3x, so the series converges for ∣x∣<1/3 and the resulting closed-form function has a vertical asymptote right at the boundary x=1/3.
Step-by-Step Solution
- Sn=1+3x+(3x)2+⋯+(3x)n−1, a geometric series with first term 1 and common ratio 3x.
- Sum: Sn=1−3x1−(3x)n (for 3x=1).
- For −31<x<31, ∣3x∣<1, so (3x)n→0 as n→∞.
- Hence f(x)=limn→∞Sn=1−3x1.
- This function f(x)=1−3x1 is undefined/blows up exactly where 1−3x=0, i.e. x=31 — an infinite discontinuity right at the edge of the domain of convergence. …
- AP EAPCET 2021Set eng-2021-08-20-AN1 markMCQQ.If f(x)=sinx3loge(1+x2(tanx)), x=0 is to be continuous at x=0, then f(0) must be equal to ______ (A) 1 (B) 0 (C) 21 (D) −1
›Reveal solutionSolution
Using the small-angle equivalences loge(1+u)∼u, tanx∼x, and sinx3∼x3 near x=0, the limit of f(x) works out to 1, so f(0)=1 is required for continuity.
Concept and Intuition
For a function to be continuous at a removable-looking point like x=0, its value there must be defined equal to the limit of the function as x→0. Standard small-x equivalences (loge(1+u)∼u for small u; tanx∼x; sinx∼x) let us evaluate the 00-type limit cleanly.
Step-by-Step Solution
- As x→0, let u=x2tanx. Since tanx∼x for small x, u∼x2⋅x=x3→0.
- Using loge(1+u)∼u for small u: loge(1+x2tanx)∼x2tanx∼x3.
- For the denominator, sin(x3)∼x3 as x→0 (since sinθ∼θ for small θ, here θ=x3→0).
- So f(x)=sin(x3)loge(1+x2tanx)→x3x3=1 as x→0. …
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.Which one of the following function is discontinuous at x=1? (A) f(x)=sin2x+tan2x+cos2x−sec2x (B) f(x)=1+2sinx1 (C) f(x)=⎩⎨⎧∣x−1∣+2(x−1)2x−1,1,x=1x=1 (D) f(x)=ex+5
›Reveal solutionSolution
Options (A), (B), (D) simplify to functions that are continuous everywhere; option (C)'s one-sided limits at x=1 disagree (+1 from the right, −1 from the left), so it alone is discontinuous at x=1.
Concept and Intuition
For piecewise/rational-looking expressions, check whether the identity sin2x+cos2x=1 and sec2x−tan2x=1 collapse them to constants (continuous), whether a denominator can vanish, and — for absolute-value expressions — whether the left and right limits genuinely agree.
Step-by-Step Solution
- (A) f(x)=sin2x+tan2x+cos2x−sec2x=(sin2x+cos2x)−(sec2x−tan2x)=1−1=0 for all x where tan,sec are defined; at x=1 (radian) cos1=0, so it's fine and continuous (≡0 near x=1).
- (B) f(x)=1+2sinx1: since 2sinx>0 always, the denominator never vanishes (≥1+2−1=1.5); continuous everywhere, including x=1.
- (C) For x=1, let t=x−1: f=∣t∣+2t2t.
- As t→0+ (x→1+): ∣t∣=t, so f=t+2t2t=1+2t1→1.
- As t→0− (x→1−): ∣t∣=−t, so f=−t+2t2t=−1+2t1→−1. …
- AP EAPCET 2024Set eng-2024-05-20-AN1 markMCQQ.The values of a and b for which the function f(x)=⎩⎨⎧1+∣sinx∣a/∣sinx∣,b,etan2x/tan3x,6−π<x<0x=00<x<6π is continuous at x=0 are (A) a=1,b=32 (B) a=32,b=e2/3 (C) a=32,b=23 (D) a=−1,b=e2/3
›Reveal solutionSolution
Both one-sided limits must equal b; the right side gives e2/3 directly, and the left side (a (1+u)1/u→e-type limit) matches it when a=2/3 — (B).
Concept and Intuition
Continuity at x=0 requires x→0−limf(x)=f(0)=x→0+limf(x). The right branch is a standard eratio of small angles limit, and the left branch is the classical exponential limit (1+u)1/u→e as u→0, raised to a power a.
Step-by-Step Solution
- Right-hand limit: as x→0+, tan2x≈2x and tan3x≈3x, so tan3xtan2x→32. Hence x→0+limetan2x/tan3x=e2/3.
- Left-hand limit: let u=∣sinx∣→0+ as x→0−. The left branch is (1+u)a/u=[(1+u)1/u]a. Since (1+u)1/u→e, this tends to ea.
- For continuity: left limit = right limit =f(0)=b, i.e. ea=e2/3=b. …
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
- AP EAPCET 2026Set eng-2026-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧(2+5x22+3x2)x28+3,k,for x=0for x=0 is a continuous function at x=0, then k= (A) e−2 (B) e−4 (C) e−8 (D) e−16
›Reveal solutionSolution
This tests the standard 1∞ exponential limit technique. Taking logs and expanding to first order in x2 gives k=e−8.
Concept and Intuition
Expressions of the form (base →1)power→∞ are evaluated by writing L=elim(power)⋅log(base) and expanding log(1+u)≈u for the small quantity u= base−1. The constant added to the exponent (here +3) never survives, since it multiplies a term that itself →0.
Step-by-Step Solution
- For continuity at x=0: k=limx→0(2+5x22+3x2)8/x2+3.
- Let L denote this limit. Then logL=limx→0(x28+3)log(2+5x22+3x2).
- Write the base as 1+u where u=2+5x22+3x2−1=2+5x2−2x2≈−x2 for small x (to leading order).
- log(1+u)≈u≈−x2 for small x. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.f(x)=⎩⎨⎧x+1(2x2−ax+1)−(ax2+3bx+2),k,if x=−1if x=−1 is a real valued function. If a,b,k∈R and f is continuous on R then k= (A) −31 (B) 6 (C) a−2 (D) a−3
›Reveal solutionSolution
Continuity at the removable-type point requires the numerator to vanish there (fixing b) and then simplifying the quotient to evaluate k as a limit. The answer is k=a−3.
Concept and Intuition
A rational expression x+1N(x) can only have a finite limit as x→−1 if N(−1)=0 (otherwise the limit is ±∞ and no choice of k can make f continuous there). So the first job is to use that vanishing condition to pin down any free constant, then simplify by cancelling the common factor.
Step-by-Step Solution
- Numerator: (2x2−ax+1)−(ax2+3bx+2)=(2−a)x2−(a+3b)x−1.
- At x=−1: (2−a)(1)+(a+3b)−1=1+3b. For the limit (hence continuity) to exist finitely, this must be 0: b=−31.
- With b=−1/3, numerator becomes (2−a)x2−(a−1)x−1.
- Factor out (x+1): writing (2−a)x2−(a−1)x−1=(x+1)[(2−a)x−1] (verified by expansion, matching all coefficients). …
- AP EAPCET 2021Set eng-2021-08-25-FN1 markMCQQ.If the function defined by f(x)=x2log(1+x)1+x−x1, x=0 is continuous at x=0, then 6f(0)= ______ (A) 2 (B) 3 (C) 1 (D) 6
›Reveal solutionSolution
Expand log(1+x) as a Taylor series to resolve the 0/0-type limit and identify the continuous value f(0).
Concept and Intuition
f is defined by a formula that's indeterminate at x=0; continuity forces f(0) to equal the limiting value as x→0, which we extract via the Taylor series of log(1+x).
Step-by-Step Solution
- f(x)=x2log[(1+x)1+x]−x1=x2(1+x)log(1+x)−x1.
- Expand log(1+x)=x−2x2+3x3−⋯.
- (1+x)log(1+x)=(x−2x2+3x3)+(x2−2x3)+O(x4)=x+2x2−6x3+O(x4).
- Divide by x2: x1+21−6x+O(x2).
- Subtract x1: f(x)=21−6x+O(x2)→21 as x→0. …
- AP EAPCET 2025Set eng-2025-05-21-FN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧x+3x2+(a+3)x+(a+1),−25,x=−3x=−3 is continuous at x=−3, then x→alim(x2+x+1)= (A) 47 (B) 25 (C) 74 (D) 52
›Reveal solutionSolution
This tests continuity of a rational function with a removable-type discontinuity: matching the limit to the given value pins down the parameter a, then the asked limit is a trivial polynomial evaluation. Answer: 47.
Concept and Intuition
A piecewise function is continuous at a point if the limit of the "elsewhere" formula, as x approaches that point, equals the value assigned at that point. Here the formula is a rational function whose denominator vanishes at x=−3; for the limit to exist (and be finite, matching −25), the numerator must also vanish there, so that (x+3) cancels — this is the standard "00 removable singularity" idea.
Step-by-Step Solution
- Continuity at x=−3 requires x→−3limx+3x2+(a+3)x+(a+1)=−25.
- Since the denominator →0, the numerator must vanish at x=−3 (else the limit is ±∞, not finite):
(−3)2+(a+3)(−3)+(a+1)=9−3a−9+a+1=1−2a=0⟹a=21.
- Check: with a=21, numerator =x2+27x+23. Factor out (x+3): x2+27x+23=(x+3)(x+21) (verify: (x+3)(x+21)=x2+21x+3x+23=x2+27x+23 ✓).
- So x→−3limx+3(x+3)(x+21)=−3+21=−25, matching the given value — confirming a=21. …
- AP EAPCET 2023Set eng-2023-05-19-FN1 markMCQQ.If a function f(x) defined on [a,b] is discontinuous at x=α∈(a,b), then (A) x→α−limf(x)=x→α+limf(x)=f(α) (B) x→αlimf(x)=f(α) (C) x→a−limf(x)=f(a) (D) x→b+limf(x)=f(b)
›Reveal solutionSolution
Discontinuity at an interior point is, by definition, the failure of "limit equals function value" there.
Concept and Intuition
A function is continuous at α iff limx→αf(x)=f(α) (which subsumes both one-sided limits agreeing with each other and with f(α)). Discontinuity is simply the negation of this statement.
Step-by-Step Solution
- Continuity at α∈(a,b) means limx→α−f(x)=limx→α+f(x)=f(α) — this is option (A), which must be false since f is given to be discontinuous at α.
- The negation of continuity is exactly: the limit at α (however it behaves) is not equal to f(α) — option (B). …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.