Q.The wavelength of a photon needed to remove a proton from a nucleus which is bound to the nucleus with 1 MeV energy is nearly
Concept understanding — Photon Energy
Photon Energy: The Energy Carried by Light
Light does not carry its energy in a continuous stream. It comes in discrete packets — like individual drops instead of a steady hose. Each packet is called a photon: the smallest possible unit of light of a given frequency. You cannot have half a photon; it is all or nothing.
The Intuition: Colour Determines Energy
Red light and blue light are both light, but they behave differently — blue light causes sunburn and drives chemical reactions more readily than red. The reason is that the colour (frequency) of light directly fixes how much energy each photon carries, and blue photons carry more energy than red photons.
The Planck–Einstein Relation
The energy E of a single photon is directly proportional to its frequency f, and inversely proportional to its wavelength λ:
E=hf=λhc
Where:
- E = energy of one photon (joules, J)
- f = frequency (hertz, Hz)
- λ = wavelength (metres, m)
- c = speed of light in vacuum (3.00×108 m/s)
- h = Planck's constant (6.626×10−34 J·s)
Planck's constant h is extremely tiny, so an individual photon carries a very small amount of energy — which is why we never feel single photons striking our skin.
What This Tells You
- Higher frequency = higher energy. Gamma rays have extremely energetic photons; radio waves have very low-energy photons.
- Shorter wavelength = higher energy. Ultraviolet photons are more energetic than visible-light photons; infrared photons are less.
- Energy is quantised. Light energy comes in fixed packets — you can have 1, 2, or 1000 photons, but never 0.5. This was Max Planck's revolutionary idea of 1900.
This is why UV light causes sunburn (UV photons carry enough energy to damage DNA, while visible photons do not), why X-ray photons are energetic enough to pass through soft tissue but get absorbed by bone, and why a photon needs enough energy to actually break a bond or drive a photochemical/biological reaction, rather than merely wavelength-dependent intensity.
A Concrete Example
Question: Which has more energy — a photon of red light (λ=700 nm) or a photon of blue light (λ=450 nm)?
Since E=λhc, energy is inversely proportional to wavelength, so the shorter-wavelength blue photon carries more energy:
- Red: Ered=700×10−9(6.626×10−34)(3.00×108)≈2.84×10−19 J
- Blue: Eblue=450×10−9(6.626×10−34)(3.00×108)≈4.42×10−19 J
The blue photon carries about 1.5 times the energy of the red photon.
A common mistake is to think brighter light means more energetic photons. Brightness is the number of photons per second, not the energy per photon. A bright red light has many low-energy photons; a dim blue light has fewer but higher-energy ones.
The Big Picture
Photon energy is the bridge between the wave nature of light (frequency, wavelength) and its particle nature (energy packets) — one of the foundational ideas of quantum mechanics: at the smallest scales, energy is not continuous but comes in discrete, indivisible units.
Photon energy, given by the Planck-Einstein relation E = hf, is one of the most fundamental formulas in the NCERT Class 12 Physics Dual Nature of Radiation and Matter chapter, and "photon energy formula and calculation" is a heavily searched query among students preparing for CBSE boards, JEE Main, and NEET. Because this idea links directly to the photoelectric effect and atomic spectra, it also anchors several "modern physics important questions" compiled for competitive-exam revision.
Why this formula?
Why Photon Energy is E=hf — The Reasoning Behind the Formula
The formula E=hf is not something you memorise and plug numbers into. It comes from a deep shift in how physicists understood light.
The problem that forced the formula
By the late 1800s, classical physics said light was a wave — continuous, carrying energy in proportion to its intensity (brightness). But blackbody radiation and the photoelectric effect showed something bizarre: when you shine light on a metal, electrons are ejected only if the light's frequency is above a certain threshold, no matter how bright the light is. Below that frequency, even the brightest lamp won't kick out a single electron. Classically this made no sense — a wave's energy depends on amplitude, not frequency.
Einstein's radical idea (1905)
Einstein proposed that light comes in discrete packets — photons — each carrying a fixed energy that depends only on its frequency, with Planck's constant h as the proportionality:
A single photon's energy is E=hf, where f is the frequency of the light.
This directly explains the photoelectric effect: an electron needs a minimum energy (the work function ϕ) to escape. If a photon's energy hf<ϕ, no electron is ejected — regardless of how many photons you send, because each photon interacts with one electron individually.
E=hf is not derived from deeper principles — it is a postulate justified by the experiments it explains, and it unified optics with quantum mechanics.
The equivalent forms
Since c=fλ for light in vacuum, the same idea in terms of wavelength is:
E=λhc
Use this when you're given λ instead of f. A photon also carries momentum (despite having no mass):
p=cE=λh
This follows from special relativity: E2=(pc)2+(mc2)2, and for a photon m=0, so E=pc, hence p=h/λ.
- h=6.626×10−34 J⋅s (Planck's constant)
- c=3.0×108 m/s (speed of light)
- For atomic-scale problems use electronvolts: 1 eV=1.602×10−19 J
A common exam trap
E=hf means higher frequency = more energy per photon — true. But a brighter light does not mean higher photon energy. Intensity is the number of photons per second per area; each photon still carries hf.
Do not confuse intensity (number of photons) with frequency (energy per photon). They are independent.
Final answer: E=hf
The key idea is that the photon must supply at least the binding energy of the proton — here 1 MeV.
Reasoning:
- The minimum photon energy required is E=1 MeV=106 eV.
- Use the photon energy-wavelength relation:
E=λhc⇒λ=Ehc.
- A useful shortcut: hc≈1240 eV⋅nm. So
λ=106 eV1240 eV⋅nm=1.24×10−3 nm.
This matches option (B).
The wavelength is nearly 1.2×10−3 nm, which corresponds to option (B).
The photon must supply exactly the binding energy of the proton (1 MeV). Using E=hc/λ, the wavelength comes out to about 1.24×10−3 nm, which matches option (B).
The core idea here is that removing a proton from a nucleus requires overcoming the nuclear binding force. That binding energy is given as 1 MeV — the minimum energy a photon must carry to eject the proton. Since a photon’s energy is inversely proportional to its wavelength, we can directly compute the wavelength.
A common pitfall is forgetting to convert units properly or mixing up the energy-wavelength relation for photons. Let’s walk through it cleanly.
- Recall the photon energy-wavelength relation For any photon, E=λhc, where h is Planck’s constant and c is the speed of light. The product hc is a very useful constant:
hc=1240 eV⋅nm
(This is exact enough for all exam purposes — it comes from h=4.135667×10−15 eV⋅s and c=2.998×108 m/s, giving hc≈1240 eV⋅nm.)
- Set the photon energy equal to the binding energy The photon must have E=1 MeV=106 eV. So:
λhc=106 eV
- Solve for λ
λ=106 eVhc=106 eV1240 eV⋅nm=1.24×10−3 nm
- Match with the options The value 1.24×10−3 nm is extremely close to 1.2×10−3 nm — the slight difference is due to rounding hc to 1240 instead of 1239.84. In multiple-choice exams, this is the intended match.
A very common mistake is to use E=hf and then forget that c=fλ, or to mix up units (e.g., using hc=1240 eV⋅nm but then treating the energy in MeV without converting to eV). Always convert MeV to eV first: 1 MeV=106 eV.
Memorising hc=1240 eV⋅nm saves enormous time. For any photon energy in eV, the wavelength in nm is simply 1240/E. For MeV energies, just shift the decimal: 1240/106=1.24×10−3.
The correct option is (B) 1.2×10−3 nm.
Method: Converting a Threshold/Binding Energy into a Photon Wavelength
Use this whenever a question gives you a minimum energy a photon must supply (a binding energy, an ionisation energy, a work function) and asks for the corresponding photon wavelength.
Steps
Step 1: Identify the minimum photon energy required
The photon must carry at least the stated binding/threshold energy — treat that value as E directly. Convert it to electron-volts if it isn't already (e.g. 1 MeV=106 eV); electron-volts pair naturally with the shortcut in Step 3.
Step 2: Start from the photon energy–wavelength relation
E=λhc⇒λ=Ehc
Step 3: Use the hc≈1240 eV⋅nm shortcut
For any photon energy expressed in eV, the wavelength in nanometres is simply
λ(nm)=E(eV)1240
This avoids carrying h and c separately through the algebra and is accurate enough for exam purposes.
Step 4: Apply to this problem and sanity-check the order of magnitude
Divide 1240 by the energy in eV, watching the powers of ten carefully — a binding energy in the MeV range (nuclear scale) should give a wavelength many orders of magnitude shorter than a typical atomic-scale binding energy (eV range, giving hundreds of nm). If your answer doesn't fall in the expected range for the physical scale of the problem, re-check the unit conversion in Step 1 rather than the formula.
- AP EAPCET 2025Set eng-2025-05-21-FN1 markMCQQ.If an electron in the excited state falls to ground state, a photon of energy 5 eV is emitted, then the wavelength of the photon is nearly (A) 748 nm (B) 598 nm (C) 398 nm (D) 248 nm
›Reveal solutionSolution
Tests the photon energy–wavelength relation for a hydrogen-atom-like transition; the emitted photon has λ≈248 nm.
Concept and Intuition
When an electron falls from an excited state to the ground state, the energy difference is carried away as a single photon, E=hν=λhc. It is convenient to remember the handy constant hc≈1240 eV⋅nm, so that E(eV)λ(nm)=1240.
Step-by-Step Solution
- Given photon energy E=5 eV.
- Using λ=E(eV)1240 nm:
λ=51240=248 nm
- This falls in the ultraviolet region, consistent with a transition ending on the ground state (Lyman-series-like energy).
Common Mistakes
- Forgetting to convert eV to Joules consistently, or misremembering the constant as 1242 vs 1240 (both give nearly the same rounded answer here).
- Confusing wavelength with frequency in the formula.
✓Final answerThe correct option is (D) — 248 nm.
ANSWER: D
- AP EAPCET 2024Set eng-2024-05-23-FN1 markMCQQ.Energy levels A, B and C of a certain atom corresponding to increasing values of energy i.e., EA<EB<EC. If λ1,λ2 & λ3 are the wavelengths of a photon corresponding to the transitions shown, then [FIGURE] (an energy-level diagram with levels EC labelled C at the top, EB labelled B in the middle, and EA labelled A at the bottom; a downward transition arrow λ1 goes from C to B, a downward transition arrow λ2 goes from B to A, and a downward transition arrow λ3 goes directly from C to A) (A) λ3=λ1+λ2 (B) λ3=λ1λ2(λ1+λ2) (C) λ32=λ12+λ22 (D) λ3=(λ1+λ2)λ1λ2
›Reveal solutionSolution
Since the energy released in going directly from C to A must equal the energy released going C→B→A, the photon energies (not wavelengths) add, giving λ3=λ1λ2/(λ1+λ2).
Concept and Intuition
Energy levels obey conservation of energy: the total energy dropped going from level C to level A is a fixed number, EC−EA, regardless of the path taken. Whether the atom emits one photon directly (C→A) or two photons via an intermediate level (C→B then B→A), the energies released must add up to the same total. Photon energy is E=hc/λ, so it is the reciprocals of the wavelengths that add, not the wavelengths themselves.
Step-by-Step Solution
- Energy released in transition C→B: E1=λ1hc.
- Energy released in transition B→A: E2=λ2hc.
- Energy released in the direct transition C→A: E3=λ3hc.
- Conservation of energy: E3=E1+E2, since EC−EA=(EC−EB)+(EB−EA).
- So λ3hc=λ1hc+λ2hc⇒λ31=λ11+λ21=λ1λ2λ1+λ2.
- Invert: λ3=λ1+λ2λ1λ2.
Common Mistakes
- Adding wavelengths directly (λ3=λ1+λ2), which would be true only if frequencies (not photon energies) related that way in the wrong sense — wavelengths of emitted photons for a bigger energy gap are shorter, not longer, so a direct sum is dimensionally tempting but physically wrong.
- Confusing which transition is the larger energy jump (C→A must release more energy than either sub-step, hence a shorter λ3 than both λ1,λ2 — consistent with the harmonic-mean-like formula in option D).
✓Final answerThe correct option is (D) — λ3=(λ1+λ2)λ1λ2.
ANSWER: D
- AP EAPCET 2023Set eng-2023-05-17-AN1 markMCQQ.The particle having zero mass is (A) proton (B) neutron (C) photon (D) electron
›Reveal solutionSolution
The photon is the only listed particle with zero rest mass; protons, neutrons, and electrons are all massive particles.
Concept and Intuition
Particles are classified by whether they have rest mass. Matter particles like the proton, neutron, and electron all have well-defined nonzero rest masses (measured precisely in atomic mass units / MeV). The photon, the quantum of the electromagnetic field, has zero rest mass — it can never be brought to rest and always moves at speed c in vacuum; its total energy is purely kinetic in the relativistic sense, given by E=pc (the massless limit of E2=(pc)2+(mc2)2).
Step-by-Step Solution
- Recall rest masses: proton ≈1.67×10−27 kg, neutron ≈1.67×10−27 kg (slightly more), electron ≈9.1×10−31 kg — all nonzero.
- Photon: has no rest mass; it is required to always move at c, consistent with m=0 in relativistic kinematics.
- Hence the particle with zero mass is the photon.
Common Mistakes
- Confusing "no charge" (neutron) with "no mass" — the neutron is neutral but definitely has mass.
✓Final answerThe correct option is (C) — photon.
ANSWER: C
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.