Q.Amongst the following ions which one has the highest magnetic moment value?
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Magnetic Moment Calculation
From a Paperclip to a Magnet: The Intuition
You already know that a magnet can pick up iron nails. But what is actually happening inside that nail when it gets near the magnet? And why does a plastic comb, rubbed on hair, pick up tiny bits of paper — but never iron filings?
The answer lies in magnetization — the process by which a material becomes magnetic.
Think of a piece of iron as a chaotic crowd of tiny compass needles. Each needle is an atomic magnetic moment (a tiny magnet, arising from the spin of electrons). In unmagnetized iron, these needles point in random directions. Their magnetic effects cancel out, so the iron as a whole shows no net magnetism.
Now bring a strong magnet close. Its magnetic field acts like a command: "Line up!" The tiny compass needles inside the iron start rotating, aligning themselves with the external field. The more they align, the stronger the iron's own magnetic field becomes. This alignment is magnetization.
Magnetization is not the same as inducing a current. It is a purely magnetic reorientation of atomic dipoles inside a material.
The Precise Definition
Magnetization (M) is the net magnetic dipole moment per unit volume of a material. It tells you how strongly a material is magnetized — how many tiny atomic magnets are aligned, and in which direction.
If a material has N atoms per unit volume, each with an average magnetic moment μavg, then:
M=Nμavg
The SI unit of M is amperes per metre (A/m). Why? Because a magnetic dipole moment has units of A·m², and dividing by volume (m³) gives A/m.
M=volumetotal magnetic dipole moment
How Magnetization Connects to the Magnetic Field
When a material gets magnetized, it produces its own magnetic field. The total magnetic field B inside the material is the sum of:
- The external applied field H (caused by free currents, like the current in a solenoid)
- The material's response — the magnetization M
The fundamental relation is:
B=μ0(H+M)
where μ0=4π×10−7T⋅m/A is the permeability of free space.
Do not confuse H (magnetic field intensity, or "magnetizing field") with B (magnetic flux density). H is what you apply; M is what the material does; B is the total field you measure.
The Three Kinds of Magnetic Materials
Not all materials respond the same way to an external field. The magnetization M is proportional to H for most materials (at least for small fields):
M=χmH
where χm is the magnetic susceptibility — a dimensionless number that tells you how easily a material magnetizes.
| Material Type | χm | Behaviour | Example |
|---|---|---|---|
| Diamagnetic | Small and negative (≈−10−5) | Weakly repelled by a magnet; M opposes H | Water, copper, bismuth |
| Paramagnetic | Small and positive (≈10−5 to 10−3) | Weakly attracted; M aligns with H | Aluminium, oxygen gas |
| Ferromagnetic | Large and positive (≫1) | Strongly attracted; M can be huge and persists even after H is removed | Iron, nickel, cobalt |
Why this formula?
Magnetic Moment Calculation: Why the Formula Holds
Let's build this from first principles — understanding the why before the formula.
1. What is Magnetic Moment?
A magnetic moment (μ) is a measure of the strength and orientation of a magnet or current loop. It tells us how strongly an object will interact with an external magnetic field.
The core idea: any moving charge creates a magnetic field. A loop of current is like a tiny bar magnet — its magnetic moment quantifies this.
2. The Fundamental Formula: Current Loop
The Setup
Consider a planar loop of wire carrying a steady current I, enclosing an area A.
Why μ=IA?
Step 1: Force on a moving charge
A charge q moving with velocity v in a magnetic field B experiences:
F=q(v×B)
Step 2: Torque on a current loop
For a rectangular loop of sides a and b (A=ab), placed in a uniform B:
- Current I means charge flows. On side of length a, the force magnitude is F=IaB (since I=tq and v=ta).
- These forces on opposite sides form a couple (equal, opposite, not collinear).
- Torque τ=force×perpendicular distance=(IaB)×(bsinθ)
Step 3: Recognize the pattern
τ=I(ab)Bsinθ=IABsinθ
This looks exactly like:
τ=μBsinθ
Comparing, we identify:
μ=IA
Why this works: The torque on a current loop is proportional to the current and the area — this product naturally defines the magnetic moment.
3. For a Single Moving Charge (Orbital Magnetic Moment)
The Setup
An electron of charge −e moves in a circular orbit of radius r with speed v.
Why μ=2evr?
Step 1: Treat orbit as a current loop
- Time for one revolution: T=v2πr
- Current (charge per unit time): I=Te=2πrev
Step 2: Apply μ=IA
- Area of orbit: A=πr2
- So: μ=(2πrev)(πr2)=2evr
Step 3: Express in terms of angular momentum
- Orbital angular momentum: L=mvr
- Therefore: μ=2meL
Why this matters: The magnetic moment is directly proportional to angular momentum. The factor 2me is called the gyromagnetic ratio — it links mechanics to magnetism.
4. For a Solenoid (Many Turns)
The Setup
A solenoid of N turns, length l, carrying current I, cross-sectional area A.
Why μ=NIA? …
Concept: Magnetic Moment Calculation
The magnetic moment μ depends on the number of unpaired electrons n:
μ=n(n+2)μB
Step 1 – Find n for each ion
- [Cr(H2O)6]3+: Cr in +3 state → [Ar]3d3 → n=3
- [Fe(H2O)6]2+: Fe in +2 state → [Ar]3d6 (high-spin, weak field ligand H₂O) → n=4
- [Zn(H2O)6]2+: Zn in +2 state → [Ar]3d10 → n=0
Step 2 – Compute μ …
The magnetic moment depends on the number of unpaired electrons. [Fe(H2O)6]2+ has 4 unpaired electrons (high-spin d6), giving the highest value of μ=4(4+2)=24≈4.90 BM.
The magnetic moment of a transition metal complex is a direct window into its electronic structure. For first-row transition metals, the spin-only formula μ=n(n+2) BM (where n is the number of unpaired electrons) works beautifully because orbital contributions are usually quenched by the ligand field. So the question reduces to: which ion has the most unpaired electrons?
Let’s examine each complex one by one.
-
[Cr(H2O)6]3+
Chromium in its +3 oxidation state: atomic number 24, so Cr3+ has 24−3=21 electrons. The configuration is [Ar]3d3. Water is a weak field ligand, so no pairing occurs — the three d electrons occupy three different t2g orbitals (Hund’s rule). Unpaired electrons: n=3.
Magnetic moment: μ=3(3+2)=15≈3.87 BM.
-
[Fe(H2O)6]2+
Iron in +2 state: atomic number 26, so Fe2+ has 26−2=24 electrons. Configuration: [Ar]3d6. Water is again weak field, so this is a high-spin complex. The six electrons fill the t2g set (three orbitals, each with one electron first, then one pairs) and then two go into eg orbitals. The t2g set has 4 electrons (one orbital doubly occupied, two singly), and eg has 2 electrons (one each). Total unpaired: 4 (two in t2g and two in eg).
Magnetic moment: μ=4(4+2)=24≈4.90 BM.
-
[Zn(H2O)6]2+ …
Method: Spin-Only Magnetic Moment Formula
We use the spin-only formula for first-row transition metal complexes (where orbital contribution is often quenched):
μ=n(n+2) B.M.
Where:
- μ = magnetic moment in Bohr magnetons (B.M.)
- n = number of unpaired electrons
Steps
Step 1: Find the oxidation state and electron configuration of the metal ion.
-
(i) [Cr(H2O)6]3+
Cr atomic number = 24
Cr3+: remove 3 electrons → [Ar]3d3
Unpaired electrons: 3
-
(ii) [Fe(H2O)6]2+
Fe atomic number = 26
Fe2+: remove 2 electrons → [Ar]3d6
H2O is a weak field ligand → high spin
Unpaired electrons: 4
-
(iii) [Zn(H2O)6]2+
Zn atomic number = 30
Zn2+: remove 2 electrons → [Ar]3d10
Unpaired electrons: 0
--- …
Here are the most common mistakes students make when solving this magnetic moment problem, along with how to avoid each.
Mistake 1: Forgetting to find the oxidation state of the metal
The Error:
Students often directly write the electronic configuration of the neutral atom (e.g., Cr: 3d54s1) and count unpaired electrons without adjusting for the charge on the complex.
Why it’s wrong:
The magnetic moment depends on the number of unpaired electrons in the metal ion, not the neutral atom. The ligands (H2O) are neutral, so the charge on the complex equals the charge on the metal ion.
How to avoid:
Always determine the oxidation state of the metal first.
- For [Cr(H2O)6]3+: Cr is in +3 state. Cr (24): [Ar]3d54s1 → Cr3+: [Ar]3d3 → 3 unpaired electrons.
- For [Fe(H2O)6]2+: Fe is in +2 state. Fe (26): [Ar]3d64s2 → Fe2+: [Ar]3d6 → 4 unpaired electrons (high spin, as H2O is a weak field ligand).
- For [Zn(H2O)6]2+: Zn is in +2 state. Zn (30): [Ar]3d104s2 → Zn2+: [Ar]3d10 → 0 unpaired electrons.
Mistake 2: Ignoring the ligand field strength (high spin vs. low spin)
The Error:
Students assume all d4, d5, d6, d7 configurations have the same number of unpaired electrons, forgetting that strong-field ligands can cause pairing.
Why it’s wrong:
H2O is a weak field ligand (for first-row transition metals). It does not cause pairing — the complex remains high spin. But if the ligand were strong (e.g., CN−, CO), the electron configuration would change.
How to avoid:
Memorize the spectrochemical series and know that H2O is weak field. For [Fe(H2O)6]2+ (d6):
- Weak field (high spin): t2g4eg2 → 4 unpaired electrons.
- Strong field (low spin): t2g6eg0 → 0 unpaired electrons.
Since H2O is weak, the answer is 4 unpaired electrons.
Mistake 3: Using the wrong formula for magnetic moment
The Error:
Students sometimes use μ=n(n+2) incorrectly — either forgetting the square root or using n as total electrons instead of unpaired electrons.
Why it’s wrong:
The formula is μ=n(n+2) Bohr magnetons, where n = number of unpaired electrons. Using total electrons gives a meaningless number.
How to avoid:
Always compute n first, then plug into μ=n(n+2).
- Cr3+: n=3 → μ=3(5)=15≈3.87 BM
- Fe2+: n=4 → μ=4(6)=24≈4.90 BM …
Showing the 12 most recent of 15 on this concept.
- CBSE 2026Set ANNUAL1 markQ.Write the formula for calculating 'spin only' magnetic moment.
›Reveal solutionSolution
The spin-only formula estimates a transition metal ion's magnetic moment purely from its number of unpaired electrons, ignoring orbital contribution.
…
- CBSE 2026Set ANNUAL1 markQ.Give one example of a complex having tetrahedral geometry and paramagnetic in nature.
›Reveal solutionSolution
[NiCl4]2− is the standard example of a tetrahedral, paramagnetic complex, arising from sp3 hybridisation of Ni2+ with the weak-field Cl− ligand.
Why [NiCl4]2− fits
Ni has configuration [Ar]3d84s2; in Ni2+, this becomes 3d8. Cl− is a weak-field ligand (low in the spectrochemical series), so it does not force pairing of the 3d electrons. With four ligands and no d-orbital freed by pairing, nickel uses one 4s and three 4p orbitals — sp3 hybridisation — giving a **tetrahedr …
- CBSE 2026Set ANNUAL1 markQ.According to VBT, which one has the highest paramagnetic character? [Cr(H2O)6]3+ or [Fe(H2O)6]2+
›Reveal solutionSolution
Counting unpaired d-electrons for each ion under VBT shows Fe2+ (d6, high-spin, 4 unpaired) is more paramagnetic than Cr3+ (d3, always 3 unpaired).
[Cr(H2O)6]3+
Cr (Z=24) is [Ar]3d54s1; Cr3+ removes 3 electrons to give 3d3. With only 3 electrons for the three t2g orbitals, Hund's rule places one electron in each — t2g3 — giving 3 unpaired electrons, regardless of whether the ligand is weak- or strong-field (there's no way to pair up 3 electrons across 3 orbitals to reduce this further).
[Fe(H2O)6]2+
…
- CBSE 2026Set ANNUAL1 markQ.Write True or False: Value of magnetic moment of a divalent ion in aqueous solution having atomic number 25, will be 5.92 B.M.
›Reveal solutionSolution
Mn2+ has 5 unpaired electrons, giving a spin-only moment of 5.92 B.M., so the statement is true.
Atomic number 25 = manganese, [Ar] 3d5 4s2. The divalent ion Mn2+ = [Ar] 3d5, which has 5 unpaired electrons.
…
- CBSE 2026Set ANNUAL1 markMCQQ.Which one of the following metal ions is likely to have a magnetic moment of 1.73 BM?(a) Fe²⁺(b) Mn²⁺(c) Cr²⁺(d) Cu²⁺
›Reveal solutionSolution
Using μ = √(n(n+2)) BM, 1.73 BM means n = 1 unpaired electron; Cu²⁺ (d⁹) is the only ion with one unpaired electron — option (D).
The spin-only magnetic moment is μ=n(n+2) BM, where n is the number of unpaired electrons. A value of 1.73 BM gives 1(1+2)=3=1.73, so n=1 unpaired electron.
Now count unpaired electrons for each ion:
- Fe2+: 3d6 → 4 unpaired (μ≈4.9 BM). …
- CBSE 2025Set JZ1 markMCQQ.Magnetic moment of a bivalent ion in aqueous solution will be, if its atomic number is 25(a) 1.73 BM(b) 2.83 BM(c) 4.96 BM(d) 5.92 BM
›Reveal solutionSolution
Mn2+ (3d5) has 5 unpaired electrons, so μ=5(5+2)=5.92 BM — option (d).
Concept. The magnetic moment of a transition-metal ion depends only on the number of unpaired d-electrons (n), through the spin-only formula μ=n(n+2) BM.
Step 1 — identify the ion. Atomic number 25 → manganese (Mn), configuration [Ar]3d54s2. A bivalent ion Mn2+ loses the two 4s electrons: Mn2+=[Ar]3d5.
…
- CBSE 2025Set ANNUAL1 markMCQQ.The spin magnetic moment of Co3+ ion is:(a) sqrt(3) BM(b) sqrt(8) BM(c) sqrt(15) BM(d) sqrt(24) BM
›Reveal solutionSolution
Co3+ has the configuration [Ar]3d6; in the high-spin (free-ion) state this places 4 electrons unpaired, giving a spin-only magnetic moment of √(n(n+2)) = √24 BM.
Cobalt (Z = 27) has ground state configuration [Ar]3d7 4s2. Removing 3 electrons to form Co3+ removes the two 4s electrons first and then one 3d electron, giving Co3+: [Ar]3d6.
Filling the five d orbitals with 6 electrons by Hund's rule (maximum multiplicity, i.e., high-spin, as would apply to the free gaseous ion or in a weak field):
↑↓ ↑ ↑ ↑ ↑ → one orbital doubly occupied, four orbitals singly occupied → 4 unpaired electrons (n = 4).
…
- CBSE 2025Set ANNUAL1 markMCQQ.Which of the following is a paramagnetic complex?(a) [Ni(H2O)6]2+(b) [Ni(CO)4](c) [Zn(NH3)4]2+(d) [Co(NH3)6]
›Reveal solutionSolution
Ni2+ (d8) with the weak-field ligand H2O keeps 2 electrons unpaired; the other three complexes all have a d10 or strong-field-paired d-count and are diamagnetic.
[Ni(H₂O)₆]²⁺: Ni²⁺ is d⁸; H₂O is a weak-field ligand and cannot force pairing, so 2 electrons remain unpaired — paramagnetic (octahedral, sp³d² outer-orbital complex).
[Ni(CO)₄]: here nickel is in the zero oxidation state, Ni(0), configuration 3d¹⁰4s⁰ — a completely filled d-subshell regardless of ligand field, so it is diamagnetic (sp³, tetrahedral).
[Zn(NH₃)₄]²⁺: Zn²⁺ is always 3d¹⁰ (fully filled) in its only common oxidation state, so it is diamagnetic (sp³, tetrahedral) irrespective of the ligand.
…
- CBSE 2024Set ANNUAL1 markMCQQ.The magnetic moment of Mn+2 in aqueous solution is –(a) 2.84 B.M(b) 3.87 B.M(c) 4.90 B.M(d) 5.92 B.M
›Reveal solutionSolution
Mn²⁺ has a half-filled d⁵ configuration with 5 unpaired electrons, and the spin-only formula gives a magnetic moment of 5.92 B.M.
Mn2+ has the configuration [Ar]3d5 — a half-filled d-subshell, with all 5 electrons unpaired (by Hund's rule, each of the 5 d-orbitals holds one electron).
Using the spin-only formula:
μ=n(n+2) B.M.,n=5
…
- CBSE 2023Set ANNUAL1 markQ.Calculate the spin only magnetic moment of M2+(aq) ion (Z=27).
›Reveal solutionSolution
Z=27 corresponds to cobalt; Co2+(aq) has the configuration 3d7 with 3 unpaired electrons, giving a spin-only magnetic moment of 15≈3.87 BM.
Identify the ion: Z=27 is cobalt (Co), with ground-state configuration [Ar]3d74s2. Removing 2 electrons (always from 4s first) to form Co2+ gives:
Co2+:[Ar]3d7
Count unpaired electrons: Distributing 7 electrons among the five 3d orbitals following Hund's rule (each orbital singly filled first, before pairing) for the aqua ion (a weak-field, high-spin case):
↑↓ ↑↓ ↑ ↑ ↑
…
- CBSE 2020Set 56/2/11 markMCQQ.Total number of unpaired electrons present in Co3+ (Atomic number = 27) is (A) 2 (B) 7 (C) 3 (D) 5
›Reveal solutionSolution
Cobalt loses three electrons to form Co3+, leaving an electronic configuration of [Ar]3d6. In the d6 configuration, pairing depends on ligand field strength, but the question asks for the ground-state free ion, which follows Hund's rule and has 4 unpaired electrons.
The number of unpaired electrons in a transition metal ion determines its magnetic properties. To find this, we need the electronic configuration of the ion and then apply Hund's rule of maximum multiplicity.
Understanding the Configuration
Cobalt has atomic number 27. The neutral atom's electronic configuration is:
[Ar]3d74s2
When cobalt forms Co3+, it loses three electrons. Electrons are always removed from the outermost shell first—both 4s electrons go first, then one 3d electron:
Co3+:[Ar]3d6
Applying Hund's Rule
The five 3d orbitals can hold up to 10 electrons. With 6 electrons to place, Hund's rule tells us to:
- Maximize unpaired electrons first by placing one electron in each orbital with parallel spin.
- Then pair up any remaining electrons.
Let me show the filling pattern for 3d6:
dxy dyz dzx dx2−y2 dz2 ↑↓ ↑ ↑ ↑ ↑ The first five electrons occupy all five orbitals singly (all spin-up). The sixth electron must pair with one of them.
Result: 4 unpaired electrons and 1 paired set. …
- CBSE 2019Set ANNUAL1 markQ.Calculate the magnetic moment of a divalent ion in aqueous solution if its atomic number is 25.
›Reveal solutionSolution
The divalent ion of element 25 is Mn2+, a 3d5 ion with all five d-orbitals singly occupied; the spin-only formula then gives μ≈5.92 BM.
Element with atomic number 25 is manganese (Mn): [Ar]3d54s2.
Forming the divalent ion Mn2+ removes the two 4s electrons first:
Mn2+: [Ar]3d5
By Hund's rule, all five 3d electrons occupy the five d-orbitals singly (maximum multiplicity), giving n=5 unpaired electrons.
…
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.