Q.The electrode potential of a magnesium electrode varies with the concentration of Mg2+ ions according to EMg2+∣Mg=EMg2+∣Mg∘−20.059log[Mg2+]1. Which of the following plots correctly represents EMg2+∣Mg (on the y-axis) against log[Mg2+] (on the x-axis)?
Concept understanding — Nernst Equation
The Nernst Equation: Why Batteries Don't Always Give Their Rated Voltage
Imagine you have a fresh AA battery. It says 1.5 V on the side. But if you measure it with a voltmeter, you might get 1.58 V when it's new, and 1.2 V when it's almost dead. Why does the voltage change? The Nernst equation is the tool that tells you exactly why.
The Core Idea: Concentration Drives Voltage
Every electrochemical cell works because of a chemical reaction that wants to happen. But here's the key: how badly the reaction wants to happen depends on how much of each chemical is present.
Think of it like a slope. A steep hill gives you more energy when you roll down. A shallow hill gives you less. In a battery, the "hill" is the difference in concentration (or more precisely, activity) of ions between the two electrodes. When the battery is fresh, the hill is steep — lots of reactants, few products. As the battery runs, reactants get used up, products build up, the hill flattens, and the voltage drops.
The Nernst equation is the mathematical formula that calculates the exact voltage for any given set of concentrations.
The Precise Statement
For a general electrochemical reaction:
aA+bB→cC+dD
The cell potential E under non-standard conditions is:
E=E∘−nFRTlnQ
Where:
- E = cell potential under the given conditions (what you actually measure)
- E∘ = standard cell potential (the voltage when all reactants and products are at 1 M concentration, 1 atm pressure, 25°C)
- R = universal gas constant (8.314 J/mol·K)
- T = temperature in Kelvin
- n = number of moles of electrons transferred in the balanced reaction
- F = Faraday constant (96,485 C/mol)
- Q = reaction quotient = [A]a[B]b[C]c[D]d (using concentrations for now)
At 25°C (298 K), the constants combine into a simpler form:
E=E∘−n0.0592log10Q
The 0.0592 comes from F2.303RT at 298 K. The 2.303 converts natural log to base-10 log, which is more convenient for calculations.
What It Actually Means
The equation has three parts:
-
E∘ — the "ideal" voltage when everything is at standard conditions. This is what you'd get in a textbook table.
-
nFRT — a scaling factor. It tells you how sensitive the voltage is to concentration changes. More electrons transferred (n) means less sensitivity.
-
lnQ — the "concentration penalty". When Q is small (lots of reactants, few products), lnQ is negative, so E is higher than E∘. When Q is large (products building up), lnQ is positive, so E drops below E∘.
A Concrete Example
Consider the Daniell cell: Zn∣Zn2+∣∣Cu2+∣Cu
The reaction is: Zn+Cu2+→Zn2++Cu
E∘=1.10 V, n=2
If [Cu2+]=0.1 M and [Zn2+]=1.0 M:
Q=[Cu2+][Zn2+]=0.11.0=10
E=1.10−20.0592log10(10)=1.10−0.0296×1=1.07 V
The voltage dropped by 0.03 V because the copper ion concentration is lower than standard.
A common mistake: forgetting that Q uses the concentrations of aqueous species and gases (as partial pressures), but not pure solids or liquids. In the Daniell cell, solid Zn and Cu don't appear in Q.
Why It Matters
The Nernst equation isn't just for batteries. It explains:
- Why a pH meter works (it measures the voltage across a membrane sensitive to H⁺ concentration)
- How nerve cells maintain their resting potential (concentration gradients of Na⁺ and K⁺ across the cell membrane)
- Why corrosion happens faster in salt water (the Nernst equation shows that lower ion concentrations can make metals more reactive)
The Takeaway
The Nernst equation is the bridge between thermodynamics (how much energy a reaction could release) and real-world conditions (what's actually in the beaker). It tells you that voltage isn't fixed — it's a dynamic quantity that responds to what's happening inside the cell.
The Nernst equation is one of the most heavily tested formulas in the NCERT/CBSE Class 12 Chemistry Electrochemistry chapter, and ‘Nernst equation derivation’ or ‘Nernst equation numericals’ appear repeatedly in board important-questions lists and JEE Main/NEET chemistry papers. Being comfortable with this equation is essential for solving cell-potential problems in competitive exams.
Since log[Mg2+]1=−log[Mg2+], the equation becomes E=E∘+20.059log[Mg2+] — a straight line of positive slope. As EMg2+∣Mg∘ is negative (about −2.37 V), the line has a negative intercept.
The plot must be a straight line (rules out the curve) with a positive slope (rules out the falling line), and its intercept must be negative because the standard potential of Mg is negative. Only option A satisfies all three.
Option A (graph (i) in the book): a straight line of positive slope 20.059=0.0295 with a negative E-axis intercept.
Rewriting the Nernst expression shows E depends linearly on log[Mg2+] with a positive slope. Because Mg has a negative standard electrode potential, the line rises from a negative intercept. So the correct graph is a straight line going up from lower-left to upper-right (option A / graph (i)).
Concept
The potential of a single electrode follows the Nernst equation. For the half-reaction Mg2++2e−→Mg the given form is
EMg2+∣Mg=EMg2+∣Mg∘−20.059log[Mg2+]1.
Why this form
A graph is easiest to read when the equation is in the straight-line form y=mx+c. Here y=E, x=log[Mg2+].
Steps
- Use the log identity log[Mg2+]1=−log[Mg2+].
- Substitute:
E=E∘−20.059(−log[Mg2+])=E∘+20.059log[Mg2+].
- Compare with y=mx+c: slope m=+20.059=+0.0295 (positive), intercept c=EMg2+∣Mg∘.
- So E increases linearly as log[Mg2+] increases — a rising straight line.
- The standard reduction potential of magnesium is negative (E∘≈−2.37 V), so the intercept lies below the origin.
Eliminating the distractors
- B — a rising straight line, but drawn with a positive intercept; it cannot represent Mg, whose E∘ is negative.
- C — a curve; the relation is linear, not curved, so this is wrong.
- D — a falling straight line (negative slope); the slope here is positive, so this is wrong.
Option A (graph (i)): a straight line of positive slope 0.0295 with a negative intercept equal to EMg2+∣Mg∘.
- CBSE 2025Set 56/4/11 markMCQQ.In an electrochemical cell, the following reaction takes place : 2Cu+(aq)+Zn(s)→2Cu(s)+Zn2+(aq) Ecell∘=1⋅28 V As the reaction progresses, what will happen to the overall voltage of the cell ? (A) Voltage will remain constant. (B) It will decrease as [Zn2+] increases. (C) It will increase as [Cu+] increases. (D) It will increase as [Zn2+] increases.
›Reveal solutionSolution
The cell voltage depends on the reaction quotient via the Nernst equation. As the reaction proceeds, [Zn2+] increases and [Cu+] decreases, so the voltage decreases. The correct option is (B).
The Nernst equation tells us that the actual voltage of an electrochemical cell under non-standard conditions is:
Ecell=Ecell∘−n0.059logQ
where Q is the reaction quotient. For the given reaction:
2Cu+(aq)+Zn(s)→2Cu(s)+Zn2+(aq)
the reaction quotient is:
Q=[Cu+]2[Zn2+]
(Remember: pure solids like Zn and Cu have activity = 1, so they don’t appear in Q.)
The number of electrons transferred, n, is 2 (each Cu⁺ gains one electron, and two Cu⁺ ions are reduced; Zn loses two electrons).
So the Nernst equation becomes:
Ecell=1.28−20.059log[Cu+]2[Zn2+]
Now, as the reaction progresses:
- [Zn2+] increases — Zn metal is oxidised to Zn²⁺, so its concentration in solution rises.
- [Cu+] decreases — Cu⁺ ions are reduced to Cu metal, so their concentration falls.
- Both changes make the fraction [Cu+]2[Zn2+] larger.
- A larger Q means logQ is larger (more positive).
- Since we subtract this term, Ecell decreases.
Watch outA common mistake is to think that because [Zn2+] appears in the numerator, the voltage might increase. But the Nernst equation has a minus sign in front of the log term — so anything that increases Q actually lowers the voltage.
TipYou can remember the direction: as a cell discharges (runs spontaneously), its voltage drops from E∘ toward zero. So if the reaction is proceeding forward, the voltage must decrease — that eliminates options (C) and (D) immediately.
Let’s check the options:
- (A) Voltage will remain constant. — False; it changes as concentrations change.
- (B) It will decrease as [Zn2+] increases. — Correct; increasing [Zn2+] raises Q, lowering E.
- (C) It will increase as [Cu+] increases. — False; [Cu+] actually decreases, and even if it increased, that would lower Q and raise E — but that’s not what happens here.
- (D) It will increase as [Zn2+] increases. — False; increasing [Zn2+] lowers E, not raises it.
✓Final answerThe correct option is (B) — the voltage decreases as [Zn2+] increases.
- CBSE 2024Set ANNUAL1 markQ.In an electrochemical cell the free energy change is related to EMF of the cell as ______.
›Reveal solutionSolution
The free energy change of a cell reaction is related to its EMF by Delta G = -nFE, which is the thermodynamic basis for the Nernst equation.
The electrical work done by a galvanic cell is equal to the product of the total charge passed and the EMF of the cell. The total charge passed when n moles of electrons flow is nF (F = Faraday constant = 96500 C/mol).
Maximum electrical work obtainable = nFE (E = EMF of the cell)
This maximum work done by the system equals the decrease in Gibbs free energy of the system, so:
Delta G = -nFE
The negative sign shows that when the cell reaction is spontaneous (E is positive for a galvanic cell), Delta G is negative, consistent with the thermodynamic criterion for spontaneity. Under standard conditions, this becomes Delta G-degree = -nFE-degree, and combined with Delta G-degree = -RT ln K, it links the cell EMF to the equilibrium constant of the reaction.
✓Final answerDelta G = -nFE.
- CBSE 2021Set A1 markMCQQ.The Electromotive force (EMF) of the cell for the cell reaction at equilibrium state is(a) positive(b) zero(c) negative(d) none of these
›Reveal solutionSolution
At equilibrium a galvanic cell is fully discharged, so its EMF = 0.
As a galvanic cell operates, the concentrations change until the reaction reaches equilibrium (the cell is 'dead').
From the Nernst equation: Ecell = E°cell − (0.059/n) log Q.
At equilibrium Q = K and Ecell = 0, giving the relation E°cell = (0.059/n) log K.
Also ΔG = −nFEcell; at equilibrium ΔG = 0, so Ecell must be zero. No further net work can be extracted.
✓Final answerThe correct option is (b) zero.
- CBSE 2020Set ANNUAL1 markQ.What is the relation between standard Gibbs' free energy and standard emf of the cell?
›Reveal solutionSolution
The standard Gibbs free energy change of a cell reaction is related to the standard cell emf by ΔG∘=−nFEcell∘.
The maximum electrical work obtainable from a galvanic cell equals the decrease in Gibbs free energy of the cell reaction. The electrical work done is the product of the total charge passed (nF, where n is the number of moles of electrons transferred in the balanced cell reaction and F is Faraday's constant, 96500 C/mol) and the cell's emf:
Electrical work = nFE_cell
Since this work is done at the expense of the free energy of the system, ΔG=−nFEcell, and under standard conditions:
ΔG∘=−nFEcell∘
This equation is central to electrochemistry: a positive Ecell∘ (spontaneous cell reaction) corresponds to a negative ΔG∘, consistent with thermodynamic spontaneity.
✓Final answerΔG∘=−nFEcell∘.
- CBSE 2020Set ANNUAL1 markQ.How is equilibrium constant related to standard Gibb's energy?
›Reveal solutionSolution
The standard Gibbs energy change of a reaction and its equilibrium constant are linked by ΔG∘=−RTlnK.
For any reaction at equilibrium, thermodynamics gives the relation
ΔG∘=−RTlnK=−2.303RTlogK
where R is the gas constant, T the absolute temperature, and K the equilibrium constant.
This connects directly to electrochemistry through the Nernst equation. Since ΔG∘=−nFEcell∘ (where n = number of electrons transferred, F = Faraday constant, Ecell∘ = standard cell potential), equating the two expressions for ΔG∘ gives
−nFEcell∘=−RTlnK⇒Ecell∘=nFRTlnK=n0.0591logK (at 298 K)
So a more negative ΔG∘ (more spontaneous reaction) corresponds to a larger K (equilibrium lies further towards products), and a larger, positive Ecell∘ also corresponds to a larger K — all three quantities describe the same underlying spontaneity.
✓Final answerΔG∘=−RTlnK=−2.303RTlogK; equivalently, via ΔG∘=−nFEcell∘, Ecell∘=n0.0591logK at 298 K.
- CBSE 2019Set ANNUAL1 markQ.Write the Nernst equation for following cell: Sn(s) | Sn²⁺ || H⁺ | H₂(g)(1bar) | Pt(s).
›Reveal solutionSolution
For the cell Sn(s) | Sn²⁺ || H⁺ | H₂(g)(1 bar) | Pt(s), n = 2 and the Nernst equation is Ecell=Ecell∘−20.0591log[H+]2[Sn2+]pH2.
From the cell notation, the left electrode (Sn) is the anode (oxidation) and the right electrode (Pt, with H₂/H⁺) is the cathode (reduction):
Anode (oxidation): Sn(s)→Sn2+(aq)+2e−
Cathode (reduction): 2H+(aq)+2e−→H2(g)
Overall cell reaction: Sn(s)+2H+(aq)→Sn2+(aq)+H2(g)
Here the number of electrons transferred, n=2.
The general Nernst equation is Ecell=Ecell∘−n0.0591logQ, where Q is the reaction quotient (products over reactants, each raised to its stoichiometric coefficient, gases as partial pressure, solids/pure liquids omitted):
Q=[H+]2[Sn2+]pH2
So:
Ecell=Ecell∘−20.0591log[H+]2[Sn2+]pH2
Since pH2=1 bar as stated, this simplifies to Ecell=Ecell∘−20.0591log[H+]2[Sn2+].
✓Final answerEcell=Ecell∘−20.0591log[H+]2[Sn2+]pH2 (n = 2, from Sn → Sn²⁺ + 2e⁻ at the anode and 2H⁺ + 2e⁻ → H₂ at the cathode).
- CBSE 2019Set ANNUAL1 markMCQQ.The electrode potential of any electrode does not depend on(a) the nature of metal and its ions(b) concentration of ions present in solution(c) pressure(d) temperature
›Reveal solutionSolution
By the Nernst equation, electrode potential depends on the nature of the metal/ions, their concentration and temperature, but not on pressure (for a metal electrode), so option (c).
The potential of an electrode is governed by the Nernst equation:
E = E° - (RT/nF) ln (1/[M^n+])
From this and the nature of the half-cell:
-
It depends on the nature of the metal and its ions (through E°).
-
It depends on the concentration of the ions in solution (the [M^n+] term).
-
It depends on temperature (the RT/nF term).
-
It does NOT depend on pressure for a solid metal electrode dipped in its ion solution. (Pressure would matter only for a gas electrode such as the hydrogen electrode.)
✓Final answer(c) pressure.
-
- CBSE 2018Set ANNUAL1 markMCQQ.For HO-C6H4-OH ⇌ O=C6H4=O + 2H+ + 2e-, E° = 1.30 V. At pH = 2, Electrode potential is -(a) 1.36 V(b) 1.30 V(c) 1.42 V(d) 1.20 V
›Reveal solutionSolution
E = E° + 0.059·pH for this couple → 1.30 + 0.118 = 1.42 V.
For the quinhydrone-type couple written as H₂Q ⇌ Q + 2H⁺ + 2e⁻ (n = 2), the Nernst equation for the reaction as written is
E = E° − (0.059/2)·log([Q][H⁺]²/[H₂Q]).
Taking activities of quinone and hydroquinone as unity:
E = E° − (0.059/2)·log[H⁺]² = E° − 0.059·log[H⁺] = E° + 0.059·pH.
At pH = 2: E = 1.30 + 0.059 × 2 = 1.30 + 0.118 = 1.418 ≈ 1.42 V.
✓Final answer(c) 1.42 V.
- CBSE 2016Set ANNUAL1 markQ.Write an equation for the relation between standard free energy change and standard cell potential.
›Reveal solutionSolution
Standard free energy change and standard cell potential are linked by ΔG∘=−nFEcell∘.
The maximum electrical work obtainable from a galvanic cell equals the decrease in Gibbs free energy of the cell reaction. Electrical work done = charge × potential = nFEcell∘, and since this work is done by the system (free energy decreases), we get
ΔG∘=−nFEcell∘
Here n = number of moles of electrons transferred in the balanced redox reaction, F = Faraday constant (96500 C mol−1), and Ecell∘ = standard EMF of the cell. A positive Ecell∘ (spontaneous cell reaction) gives a negative ΔG∘, consistent with thermodynamic spontaneity.
✓Final answerΔG∘=−nFEcell∘
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.