Lambda⁰m(NH_4OH) is equal to _______. (i) Lambda⁰m – Class 12 Chemistry

NCERT Exemplar · Q16

\Lambda^0_{m(NH_4OH)}

(i)

\Lambda^0_{m(NH_4OH)} + \Lambda^0_{m(NH_4Cl)} - \Lambda^0_{m(HCl)}

(ii)

\Lambda^0_{m(NH_4Cl)} + \Lambda^0_{m(NaOH)} - \Lambda^0_{m(NaCl)}

(iii)

\Lambda^0_{m(NH_4Cl)} + \Lambda^0_{m(NaCl)} - \Lambda^0_{m(NaOH)}

(iv)

\Lambda^0_{m(NaOH)} + \Lambda^0_{m(NaCl)} - \Lambda^0_{m(NH_4Cl)}

CBSEMCQ· 1mImportance★★★★★

51% · 59/115 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Molar Conductivity

From Resistance to Conductance: Flipping the Idea

You already know resistance ( $R$ ) — it tells you how much a material opposes the flow of current. A high resistance means the wire fights the current; a low resistance means it lets current through easily.

Now flip that thought. Instead of asking "how much does it resist?", ask "how easily does it let current flow?" That's exactly what conductance measures.

Note

Conductance ( $G$ ) is the reciprocal of resistance:

$G = \frac{1}{R}$

Unit: siemens (S) — named after Werner von Siemens. 1 S = 1 A/V (ampere per volt).

If a wire has $R = 10\ \Omega$ , its conductance is $G = 0.1\ \text{S}$ . If $R = 0.5\ \Omega$ , $G = 2\ \text{S}$ — it conducts twice as well.

Ohm's Law in Conductance Form

You know $V = IR$ . Rearranging:

I = \frac{V}{R} = G V

So current = conductance × voltage. A high-conductance material draws a large current for the same voltage — it's a "good conductor."

Now, Conductivity: The Material's Intrinsic Property

Resistance depends on two things: the material itself (its "resistivity" $\rho$ ) and the geometry (length $L$ , cross-sectional area $A$ ):

R = \rho \frac{L}{A}

Conductance also depends on geometry. A thicker wire (larger $A$ ) or a shorter wire (smaller $L$ ) has higher conductance. To isolate the material's inherent ability to conduct, we define conductivity ( $\sigma$ ):

\sigma = \frac{1}{\rho}

Conductivity is the reciprocal of resistivity. It tells you how well the material itself conducts, independent of shape and size.

Unit: siemens per metre (S/m).
High $\sigma$ → good conductor (copper: $\approx 5.8 \times 10^7\ \text{S/m}$ ).
Low $\sigma$ → poor conductor / insulator (glass: $\approx 10^{-12}\ \text{S/m}$ ).

Watch out

Don't confuse conductance (property of a specific object, depends on geometry) with conductivity (property of the material, independent of geometry). A short thick copper wire has high conductance; a long thin copper wire has lower conductance — but both have the same conductivity.

The Big Picture in One Table

Quantity	Symbol	Definition	Depends on	Unit
Resistance	$R$	$V/I$	Material + geometry	$\Omega$
Resistivity	$\rho$	$R A / L$	Material only	$\Omega \cdot \text{m}$
Conductance	$G$	$1/R$	Material + geometry	S
Conductivity	$\sigma$	$1/\rho$	Material only	S/m

Intuitive Analogy

Think of a water pipe:

Resistance = how hard it is to push water through (narrow, long pipe).
Conductance = how easily water flows (wide, short pipe). …

Why this formula?

Conductance and Conductivity: Why the Formulas Hold

Let's build this from first principles — understanding the why before the what.

1. The Core Idea: How Easily Does Current Flow?

Think of a conductor (like a copper wire). When you apply a voltage across it, electrons drift through the material. Two questions arise:

How much current flows for a given voltage? → This is conductance ( $G$ ).
How well does the material itself allow current? → This is conductivity ( $\sigma$ ).

The key distinction: Conductance depends on the size and shape of the object. Conductivity is an intrinsic property of the material.

2. Ohm's Law in Terms of Conductance

You know Ohm's law:

V = IR

But we can rewrite it as:

I = \frac{V}{R}

Define conductance $G$ as the reciprocal of resistance:

G = \frac{1}{R}

So:

I = G V

Why this makes sense:

A larger $G$ means more current for the same voltage — the conductor "conducts" better.
$G$ has units of siemens (S) = $\text{A/V}$ .

3. From Resistance to Conductivity: The Geometry Factor

Resistance of a uniform conductor depends on:

Length $L$ (longer → more resistance)
Cross-sectional area $A$ (thicker → less resistance)
Material property $\rho$ (resistivity)

The formula:

R = \rho \frac{L}{A}

Now, conductivity $\sigma$ is the reciprocal of resistivity:

\sigma = \frac{1}{\rho}

So:

R = \frac{1}{\sigma} \cdot \frac{L}{A}

Why this form?

If you double the length, electrons have to travel twice as far, colliding more → resistance doubles.
If you double the area, there's twice as many "lanes" for electrons → resistance halves.

4. The Key Formula: Conductance in Terms of Conductivity

Since $G = 1/R$ , we get:

G = \sigma \frac{A}{L}

This is the central relationship. Let's see why it holds:

$\sigma$ tells you how well the material conducts (intrinsic).
$A/L$ tells you how the geometry amplifies or reduces that.

Intuition:

A fat, short wire ( $A$ large, $L$ small) has high conductance.
A thin, long wire ( $A$ small, $L$ large) has low conductance.
A material with high $\sigma$ (like copper) gives higher $G$ than one with low $\sigma$ (like iron), for the same shape.

5. Microscopic Derivation (Why $\sigma$ Exists)

At the microscopic level, conductivity arises from electron motion:

\sigma = n e \mu

Where:

$n$ = number of free electrons per unit volume
$e$ = electron charge …

Start your 14-day free trial to unlock the full solution →

The limiting molar conductivity of a weak electrolyte like $NH_4OH$ can be found by combining the $\Lambda_m^0$ values of strong electrolytes that share its ions. Using Kohlrausch’s law of independent ion migration, the correct expression is $\Lambda_{m(NH_4OH)}^0 = \Lambda_{m(NH_4Cl)}^0 + \Lambda_{m(NaOH)}^0 - \Lambda_{m(NaCl)}^0$ , which corresponds to option (ii).

The key idea here is Kohlrausch’s law: at infinite dilution, each ion contributes a fixed amount to the molar conductivity, independent of the other ion it travels with. So the limiting molar conductivity of any electrolyte is simply the sum of the limiting conductivities of its constituent ions.

For a weak base like $NH_4OH$ , we cannot measure $\Lambda_m^0$ directly by extrapolation (because it doesn’t fully dissociate even at low concentrations). But we can build it from the $\Lambda_m^0$ values of strong electrolytes that contain the same ions — $NH_4^+$ and $OH^-$ — by adding and subtracting known values to cancel out the unwanted ions.

Let’s see how.

Write what we want in terms of ions.

$\Lambda_{m(NH_4OH)}^0 = \lambda_{NH_4^+}^0 + \lambda_{OH^-}^0$

That’s our target.
Find strong electrolytes that give us these ions.
- $NH_4Cl$ gives $\lambda_{NH_4^+}^0 + \lambda_{Cl^-}^0$
- $NaOH$ gives $\lambda_{Na^+}^0 + \lambda_{OH^-}^0$
- $NaCl$ gives $\lambda_{Na^+}^0 + \lambda_{Cl^-}^0$
Combine them to isolate the target sum.

If we add the first two and subtract the third:

(\lambda_{NH_4^+}^0 + \lambda_{Cl^-}^0) + (\lambda_{Na^+}^0 + \lambda_{OH^-}^0) - (\lambda_{Na^+}^0 + \lambda_{Cl^-}^0)

The $\lambda_{Na^+}^0$ and $\lambda_{Cl^-}^0$ cancel perfectly, leaving:

\lambda_{NH_4^+}^0 + \lambda_{OH^-}^0 = \Lambda_{m(NH_4OH)}^0

Translate back to electrolyte notation. So: …

Start your 14-day free trial to unlock the full solution →

Common Mistakes & How to Avoid Them

Mistake 1: Not Understanding Kohlrausch’s Law

Students often try to memorise the answer without knowing why the formula works.

How to avoid:

Kohlrausch’s Law states that at infinite dilution, molar conductivity is the sum of independent ionic contributions:

\Lambda_m^0 = \lambda_+^0 + \lambda_-^0

For a weak base like $NH_4OH$ , you cannot measure $\Lambda_m^0$ directly (it doesn’t fully dissociate). So you build it from strong electrolytes whose $\Lambda_m^0$ values are known.

Mistake 2: Forgetting to Cancel Ions Correctly

Students pick options without checking if the unwanted ions cancel out.

How to avoid:

Write each electrolyte as its ions, then cancel common ions.

For correct option (ii):

\Lambda_{m(NH_4Cl)}^0 = \lambda_{NH_4^+}^0 + \lambda_{Cl^-}^0

\Lambda_{m(NaOH)}^0 = \lambda_{Na^+}^0 + \lambda_{OH^-}^0

\Lambda_{m(NaCl)}^0 = \lambda_{Na^+}^0 + \lambda_{Cl^-}^0

Now do:

(\lambda_{NH_4^+} + \lambda_{Cl^-}) + (\lambda_{Na^+} + \lambda_{OH^-}) - (\lambda_{Na^+} + \lambda_{Cl^-})

Cancel $\lambda_{Na^+}$ and $\lambda_{Cl^-}$ → you get:

\boxed{\lambda_{NH_4^+}^0 + \lambda_{OH^-}^0 = \Lambda_{m(NH_4OH)}^0}

Mistake 3: Confusing Addition/Subtraction Signs

Students misplace the minus sign, especially in options like (iii) or (iv).

How to avoid:

Always write the ionic breakdown before deciding the sign. The target is $NH_4^+ + OH^-$ .

You need $NH_4^+$ from $NH_4Cl$
You need $OH^-$ from $NaOH$
You must subtract the common ion pair ( $Na^+ + Cl^-$ ) that appears twice — that’s $NaCl$ .

So the correct structure is:

\Lambda_{m(NH_4Cl)}^0 + \Lambda_{m(NaOH)}^0 - \Lambda_{m(NaCl)}^0

Mistake 4: Picking Option (i) Without Checking

Option (i) looks similar but uses $HCl$ instead of $NaOH$ and $NaCl$ . …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

Showing the 12 most recent of 32 on this concept.

CBSE 2025Set ANNUAL1 mark
$Q. What is the SI unit of molar conductivity?$
›Reveal solutionSolution

Molar conductivity's SI unit is S m² mol⁻¹.

Molar conductivity $\Lambda_m = \dfrac{\kappa}{C}$ , where $\kappa$ (conductivity) has SI unit $S\,m^{-1}$ and concentration $C$ has SI unit $mol\,m^{-3}$ .

$\Lambda_m = \dfrac{S\,m^{-1}}{mol\,m^{-3}} = S\,m^2\,mol^{-1}$

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 mark
$Q. Define the following — Limiting molar conductivity$
›Reveal solutionSolution

Limiting molar conductivity is molar conductivity extrapolated to zero concentration.

Limiting molar conductivity ( $\Lambda_m^0$ or $\Lambda_m^\infty$ ) is the molar conductivity of an electrolyte solution when the concentration approaches zero (i.e. at infinite dilution). At infinite dilution, dissociation of the electrolyte is essentially complete and inter-ionic attractions vanish, so each ion conducts independently and to its maximum extent. For strong electrolytes, $\Lambda_m^0$ is obtained by extrapolating the $\Lambda_m$ …

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. Equivalent conductances of sodium acetate, sodium chloride and hydrochloric acid at infinite dilution are 224, 38.2, 203 ohm^-1 cm^2 eqv^-1 respectively at 298K. So the (lambda)0 CH3COOH is:$
(a) 288.5 ohm^-1 cm^2 eqv.^-1
(b) 288.8 ohm^-1 cm^2 eqv.^-1
(c) 388.8 ohm^-1 cm^2 eqv.^-1
(d) 59.2 ohm^-1 cm^2 eqv.^-1
›Reveal solutionSolution

λ0(CH3COOH) = λ0(CH3COONa) + λ0(HCl) − λ0(NaCl) = 224 + 203 − 38.2 = 388.8 ohm^-1 cm^2 eqv^-1.

CH3COOH is a weak electrolyte, so its limiting equivalent conductance cannot be found by direct extrapolation. Instead, Kohlrausch's law of independent migration of ions lets us combine the limiting conductances of related strong electrolytes.

We want λ0(CH3COO-) + λ0(H+). Note that:

λ0(CH3COONa) = λ0(CH3COO-) + λ0(Na+) = 224

λ0(HCl) = λ0(H+) + λ0(Cl-) = 203

λ0(NaCl) = λ0(Na+) + λ0(Cl-) = 38.2

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 mark
$Q. Fill in the blank: Molar conductivity ________ with decrease in concentration.$
›Reveal solutionSolution
Molar conductivity increases as concentration decreases (i.e., on dilution), reaching a maximum limiting value at infinite dilution.

Molar conductivity is given by:

Λm = κ x 1000 / M

As a solution is diluted (concentration M decreases):

For weak electrolytes: the degree of dissociation increases sharply with dilution, so more ions are produced per mole, increasing Λm markedly. …
Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. The unit of molar conductivity is$
(a) S cm^-2 mol^-1
(b) S cm^2 mol^-1
(c) S^-1 cm^2 mol^-1
(d) S cm^2 mol
›Reveal solutionSolution

Molar conductivity relates conductivity (S/cm) to concentration (mol/cm^3), giving the composite unit S cm^2 mol^-1.

Molar conductivity is defined as:

$\Lambda_m = \dfrac{\kappa \times 1000}{C}$

where $\kappa$ (specific conductivity) has units S cm^-1 and $C$ (concentration) has units mol L^-1 (mol per 1000 cm^3).

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$L^{-1}$
(a) 12.9 S cm $^2$ mol $^{-1}$
(b) 1.29 S cm $^2$ mol $^{-1}$
(c) 0.0129 S cm $^2$ mol $^{-1}$
(d) 129 S cm $^2$ mol $^{-1}$
›Reveal solutionSolution

Converting conductivity (per cm) into molar conductivity requires dividing by the molar concentration expressed per cm³, giving a factor of 1000 in the standard formula.

Molar conductivity is related to the specific conductivity (electrolytic conductivity, $\kappa$ ) and molar concentration $C$ (in $mol\,L^{-1}$ ) by:

$\Lambda_m = \frac{\kappa \times 1000}{C}$

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. The formula used to calculate molar conductivity of an electrolyte is _____.$
(a) $\Lambda=\dfrac{1000c}{k}$
(b) $c=\dfrac{1000\Lambda}{k}$
(c) $\Lambda=\dfrac{1000k}{c}$
(d) $k=\dfrac{1000}{\Lambda c}$
›Reveal solutionSolution

$\Lambda_m = \dfrac{1000\,\kappa}{c}$ .

Molar conductivity ( $\Lambda_m$ ) relates to specific conductivity ( $\kappa$ ) and molar concentration $c$ (in $mol\,dm^{-3}$ ) by:

$\Lambda_m = \dfrac{\kappa \times 1000}{c}$

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 mark
$Q. What is the SI unit of molar conductivity? OR Write the relation between specific conductivity and molar conductivity.$
›Reveal solutionSolution

Molar conductivity's SI unit follows from $\Lambda_m = \kappa/C$ : siemens metre-squared per mole.

Molar conductivity is defined as $\Lambda_m = \dfrac{\kappa}{C}$ , where $\kappa$ (specific/electrical conductivity) has SI unit $S\,m^{-1}$ and $C$ (molar concentration) has SI unit $mol\,m^{-3}$ . Dividing, the SI unit of $\Lambda_m$ works out to

$\frac{S\,m^{-1}}{mol\,m^{-3}} = S\,m^2\,mol^{-1}.$

(In practical lab work, where $\kappa$ is often expressed in $S\,cm^{-1}$ and $C$ in $mol\,L^{-1}$ , the commonly used relation is $\Lambda_m = \dfrac{1000\,\kappa}{C}$ , giving the c.g.s.-style unit $S\,cm^2\,mol^{-1}$ .)

…

Start your 14-day free trial to see the full solution →
CBSE 2024Set A11 markMCQ
$Q. When the concentration of electrolytic solution approaches zero, the resulting molar conductivity is known as ;$
(a) specific conductance
(b) resistivity
(c) conductivity
(d) limiting molar conductivity
›Reveal solutionSolution

Molar conductivity at zero concentration (infinite dilution) is called the limiting molar conductivity — option (d).

Molar conductivity $\Lambda_m$ increases as an electrolytic solution is diluted, because more of the electrolyte is present as free, effectively conducting ions. As the concentration approaches zero (infinite dilution), $\Lambda_m$ reaches a limiting maximum value denoted $\Lambda_m^\circ$ , the **limiting molar co …
Start your 14-day free trial to see the full solution →
CBSE 2024Set B1 mark
$Q. Answer in one word/sentence: Write the unit of Equivalence conductivity.$
›Reveal solutionSolution

Equivalent conductivity is conductivity per gram-equivalent of electrolyte per unit volume, giving units of S cm^2 eq^-1.

Equivalent conductivity, $\Lambda_{eq}$ , is defined as $\Lambda_{eq} = \kappa \times V$ , where $\kappa$ (specific conductivity) has units of S cm^-1 (ohm^-1 cm^-1) and V is the volume in cm^3 containing one gram-equivalent of …

Start your 14-day free trial to see the full solution →
CBSE 2024Set ANNUAL1 mark
$2.5 \times 10^{-2}$
›Reveal solutionSolution

Adding the limiting ionic molar conductivities gives Λm°, and dividing the measured Λm by it gives the degree of dissociation.

For a weak electrolyte, the degree of dissociation is given by:

$\alpha = \frac{\Lambda_m}{\Lambda_m°}$

Limiting molar conductivity of methanoic acid (using Kohlrausch's law of independent migration of ions):

$\Lambda_m° = \lambda°_{H^+} + \lambda°_{HCOO^-} = 349.6 + 54.6 = 404.2\ S\,cm^2\,mol^{-1}$ …

Start your 14-day free trial to see the full solution →
CBSE 2024Set ANNUAL1 mark
$Q. Write SI unit of molar conductivity.$
›Reveal solutionSolution

SI unit of molar conductivity is $S\,m^2\,mol^{-1}$ .

Molar conductivity $\Lambda_m$ is defined as the conducting power of all the ions produced by dissolving one mole of an electrolyte, measured between electrodes 1 m apart.

…

Start your 14-day free trial to see the full solution →

←Previous questionQ15 — While charging the lead storage battery _______. (i) PbSO₄ anode is re…→Next questionQ17 — In the electrolysis of aqueous sodium chloride solution which of the h…

Q. $\Lambda^0_{m(NH_4OH)}$ is equal to ______________.

Concept understanding — Molar Conductivity

From Resistance to Conductance: Flipping the Idea

Ohm's Law in Conductance Form

Now, Conductivity: The Material's Intrinsic Property

The Big Picture in One Table

Intuitive Analogy

Why this formula?

Conductance and Conductivity: Why the Formulas Hold

1. The Core Idea: How Easily Does Current Flow?

2. Ohm's Law in Terms of Conductance

3. From Resistance to Conductivity: The Geometry Factor

4. The Key Formula: Conductance in Terms of Conductivity

5. Microscopic Derivation (Why $\sigma$ Exists)

Method: Kohlrausch’s Law of Independent Migration of Ions

Steps

Common Mistakes & How to Avoid Them

Mistake 1: Not Understanding Kohlrausch’s Law

Mistake 2: Forgetting to Cancel Ions Correctly

Mistake 3: Confusing Addition/Subtraction Signs

Mistake 4: Picking Option (i) Without Checking

Q.Λm(NH4OH)0\Lambda^0_{m(NH_4OH)}Λm(NH4​OH)0​ is equal to ______________.

🎓Unlock everything free for 14 days

Q. $\Lambda^0_{m(NH_4OH)}$ is equal to ______________.

Unlock everything free for 14 days