Give reasons: (i) Shaving soaps contain glycerol. (ii) Antacids should not be used for longer time.

Question

Q. Give reasons:

(i) Shaving soaps contain glycerol.

(ii) Antacids should not be used for longer time.

CBSECBSE Class XII Board 2020Subjective· 2mImportance★★★★★est

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Soaps and Detergents

Soaps and Detergents – The Intuition

Imagine you've just cooked a greasy pan. Water alone slides off the oil like it's repelled. You need something that can grab onto both the water and the grease, then pull the grease away. That's exactly what a soap or detergent does.

At the heart of it is a simple molecular trick: one end of the molecule loves water (hydrophilic), and the other end loves oil and grease (hydrophobic). When you scrub, the hydrophobic ends burrow into the grease, while the hydrophilic ends stick out, ready to be carried away by water. Rinse, and the whole greasy blob goes down the drain.

The Precise Chemistry

Soaps – The Traditional Cleaner

A soap is the sodium or potassium salt of a long-chain fatty acid. You make it by reacting a fat or oil (a triglyceride) with a strong base like NaOH — this is called saponification.

The general structure is:

\text{R-COO}^- \text{Na}^+

where R is a long hydrocarbon chain (typically 12–18 carbons). The $\text{R}$ part is hydrophobic (water-hating), and the $\text{COO}^- \text{Na}^+$ part is hydrophilic (water-loving).

Important

Soaps work beautifully in soft water. But in hard water (water containing $\text{Ca}^{2+}$ or $\text{Mg}^{2+}$ ions), the soap reacts to form an insoluble scum:

$2\,\text{RCOO}^- \text{Na}^+ + \text{Ca}^{2+} \rightarrow (\text{RCOO})_2\text{Ca} \downarrow + 2\,\text{Na}^+$

That white, sticky precipitate is useless for cleaning and leaves a ring in your tub.

Detergents – The Hard-Water Solution

Detergents are synthetic surfactants designed to avoid the scum problem. Instead of a carboxylate group ( $\text{COO}^-$ ), they use a sulfonate group ( $\text{SO}_3^-$ ) or a sulfate group ( $\text{OSO}_3^-$ ). The key difference: calcium and magnesium salts of sulfonates are soluble in water.

A common example is sodium dodecylbenzenesulfonate:

\text{C}_{12}\text{H}_{25}\text{-}\text{C}_6\text{H}_4\text{-}\text{SO}_3^- \text{Na}^+

The long alkyl chain ( $\text{C}_{12}\text{H}_{25}$ ) is hydrophobic; the sulfonate head ( $\text{SO}_3^-$ ) is hydrophilic. Because the calcium salt of this sulfonate is soluble, no scum forms in hard water.

\text{RCOO}^- \text{Na}^+

How They Clean – The Mechanism

Micelle formation: In water, soap/detergent molecules cluster into spheres called micelles. The hydrophobic tails point inward, trapping grease, and the hydrophilic heads face outward, keeping the whole assembly suspended in water.
Emulsification: The grease gets broken into tiny droplets, each surrounded by a layer of surfactant molecules. This is an emulsion — a stable dispersion of one liquid in another.
Removal: Rinsing washes away the micelles, taking the grease with them.

Tip

For exams: Remember that micelles form only above a certain concentration called the critical micelle concentration (CMC). Below that, surfactants exist as individual molecules.

--- …

Start your 14-day free trial to unlock the full solution →

Glycerol in shaving soaps acts as a humectant to retain moisture and prevent the lather from drying out on the skin. Antacids should not be used for long periods because they can mask underlying medical conditions and cause side effects like alkalosis or kidney stones.

(i) Shaving soaps contain glycerol.

Concept and intuition:

Shaving soaps are designed to produce a rich, stable lather that softens the beard and lubricates the skin for a smooth shave. But a common problem with soap lather is that it dries out quickly when exposed to air, leaving the skin feeling tight and irritated. Glycerol (also called glycerine) is a humectant — a substance that attracts and holds water molecules from the air. By adding glycerol, the soap lather stays moist and slippery for longer, reducing friction and protecting the skin from razor burn.

Step-by-step reasoning:

What is glycerol?

Glycerol is a trihydroxy alcohol ( $\mathrm{C_3H_8O_3}$ ) with three –OH groups. These hydroxyl groups form hydrogen bonds with water, making glycerol highly hygroscopic (water-attracting).
How does it work in shaving soap?

When you whip the soap into a lather, water is trapped in the foam. Without glycerol, the water evaporates quickly, and the lather dries into a crust. Glycerol slows evaporation by holding water molecules, keeping the lather soft and creamy throughout the shave.
Additional benefit:

Glycerol also acts as a mild moisturiser for the skin, preventing the drying effect that ordinary soap can have. This is why many shaving creams and soaps list glycerol as a key ingredient.

Watch out

A common mistake is to think glycerol is added only to make the soap foam more. In fact, glycerol does not increase foam volume — it improves foam stability and moisture retention.

(ii) Antacids should not be used for longer time.

Concept and intuition:

Antacids are over-the-counter medicines that neutralise excess stomach acid (HCl) to relieve heartburn or indigestion. They work quickly, but they are meant for short-term relief only. Prolonged use can disrupt the body’s acid-base balance, interfere with digestion, and lead to serious health issues.

Step-by-step reasoning:

How antacids work: Common antacids contain bases like magnesium hydroxide ( $\mathrm{Mg(OH)_2}$ ), aluminium hydroxide ( $\mathrm{Al(OH)_3}$ ), or sodium bicarbonate ( $\mathrm{NaHCO_3}$ ). They react with stomach HCl:

\mathrm{Mg(OH)_2 + 2HCl \rightarrow MgCl_2 + 2H_2O}

This neutralisation raises the pH of the stomach contents, providing relief.

Why long-term use is harmful:
- Masking serious conditions: Persistent acidity could be a symptom of peptic ulcers, GERD, or even stomach cancer. Using antacids repeatedly delays diagnosis and proper treatment. …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

CBSE 2025Set D1 markMCQ
$Q. Alkali salt of palmitic acid is known as$
(a) an alkoxide
(b) an ester
(c) a soap
(d) an epoxide
›Reveal solutionSolution

Soaps are sodium or potassium salts of higher fatty acids; the alkali salt of palmitic acid is therefore a soap.

Palmitic acid is a long-chain (higher) fatty acid, C15H31COOH. Its sodium or potassium (alkali metal) salt, e.g. sodium palmitate C15H31COONa, is a soap. Soaps are made by alkaline hydrolysis (saponification) of fats and oils, which are esters of glycerol with such fatty acids.

…

Start your 14-day free trial to see the full solution →
CBSE 2023Set F1 markMCQ
$Q. Which of the following is used as a soap?$
(a) C17H35COONa
(b) (C17H35COO)2Ca
(c) C17H35COOH
(d) C15H31COOH
›Reveal solutionSolution

Soap is the sodium (or potassium) salt of a long-chain fatty acid: C17H35COONa — option (A).

Soaps are sodium or potassium salts of higher fatty acids (e.g. stearic acid). Sodium stearate, C17H35COONa, is a typical soap: the ionic –COO⁻Na⁺ head is water-loving and the long hydrocarbon tail is oil-loving, allowing it to emulsify grease.

…

Start your 14-day free trial to see the full solution →
CBSE 2022Set ANNUAL1 mark
$Q. Why do soaps not work in hard water?$
›Reveal solutionSolution

Hard water's Ca2+/Mg2+ ions displace Na+/K+ from soap molecules, forming an insoluble curdy precipitate instead of a working lather.

Ordinary soap is a sodium (or potassium) salt of a long-chain fatty acid, e.g. sodium stearate (C₁₇H₃₅COONa). Hard water contains dissolved Ca²⁺ and Mg²⁺ salts. These divalent ions react with the soap's fatty-acid anion to form calcium/magnesium stearate, which is insoluble in water and precipitates as a sticky scum:

2C₁₇H₃₅COONa + Ca²⁺ → (C₁₇H₃₅COO)₂Ca↓ + 2Na⁺.

…

Start your 14-day free trial to see the full solution →
CBSE 2020Set 56/1/11 mark
$Q. Which structural unit present in a detergent makes it non-biodegradable?$
›Reveal solutionSolution
Highly branched hydrocarbon chains resist bacterial enzyme attack, making detergents non-biodegradable; the answer is branched alkyl chains.

Biodegradability hinges on whether microorganisms can break down a molecule. Bacteria in soil and water possess enzymes that cleave long hydrocarbon chains step-by-step, typically starting from the terminal carbon and working inward through a process called β-oxidation. This works beautifully when the chain is linear—the enzyme can "walk" along it smoothly. But throw in extensive branching, and the enzyme's active site can no longer fit properly around the substrate. The branches create steric hindrance, blocking the enzyme's access.

Early synthetic detergents used alkylbenzene sulfonates (ABS) with highly branched alkyl side chains—often derived from propylene tetramers, which produced structures like this:
$\ce{C6H4-SO3^- Na^+}$
attached to a chain such as $\ce{-CH(CH3)-CH2-CH(CH3)-CH2-CH(CH3)-...}$

These branched chains accumulated in rivers and lakes, famously causing foam mountains in the 1960s because bacteria couldn't degrade them.

Why structure matters

Linear chains (found in soaps and modern biodegradable detergents like linear alkylbenzene sulfonates, LAS) present a smooth surface for enzymatic attack. Bacterial lipases and oxidases can sequentially remove two-carbon units.

Branched chains, especially those with quaternary carbons or methyl groups every few carbons, physically obstruct the enzyme. The branching points cannot be processed by the standard β-oxidation pathway, so the molecule persists. …
Start your 14-day free trial to see the full solution →
CBSE 2020Set 56/3/11 mark
$Q. Name the class of the synthetic detergent which is used in toothpaste.$
›Reveal solutionSolution
The synthetic detergent used in toothpaste is an anionic surfactant — specifically, sodium lauryl sulfate (SLS) — which creates foam and helps remove food particles and plaque.

The question asks for the class of synthetic detergent used in toothpaste, not just a brand name. To answer this, we need to understand what detergents do in toothpaste and how they are classified.

Toothpaste needs a substance that lowers surface tension so that the paste can spread easily, create foam, and help dislodge debris from teeth. This is the job of a surfactant (surface-active agent). Synthetic detergents are a type of surfactant.

Classification of synthetic detergents: Synthetic detergents are broadly classified based on the charge on the hydrophilic (water-loving) part of the molecule:

Anionic detergents: The hydrophilic part carries a negative charge (e.g., sodium lauryl sulfate).

Cationic detergents: The hydrophilic part carries a positive charge (e.g., cetyltrimethylammonium bromide).

Non-ionic detergents: The hydrophilic part has no charge (e.g., polyoxyethylene alkyl ethers).

Why anionic detergents are used in toothpaste: The most common synthetic detergent in toothpaste is sodium lauryl sulfate (SLS). SLS is an anionic detergent because its lauryl sulfate ion ( $\text{C}_{12}\text{H}_{25}\text{OSO}_3^-$ ) carries a negative charge. It is chosen because:

It is an excellent foaming agent, which gives the satisfying lather users expect.

It is effective at removing oily food residues and plaque from teeth.

It is relatively inexpensive and stable in the toothpaste formulation. …
Start your 14-day free trial to see the full solution →
CBSE 2018Set ANNUAL1 mark
$Q. Soft soaps are potassium salts of higher fatty acids. True/False$
›Reveal solutionSolution
The statement is TRUE: soft soaps are potassium salts of long-chain fatty acids, while hard soaps are the corresponding sodium salts.

Soaps are the alkali-metal (sodium or potassium) salts of long-chain fatty acids, made by the alkaline hydrolysis (saponification) of fats/oils (triglycerides):

$\text{Fat/Oil (glyceryl ester)} + NaOH/KOH \rightarrow \text{Soap } (RCOONa \text{ or } RCOOK) + \text{Glycerol}$

Hard soaps are made using $NaOH$ , giving the sodium salt of the fatty acid — harder, less soluble. …
Start your 14-day free trial to see the full solution →

Q.Give reasons:

(i) Shaving soaps contain glycerol.

(ii) Antacids should not be used for longer time.

🎓Unlock everything free for 14 days

Unlock everything free for 14 days