Calculate the maximum work and $\log K_c$ for the given reaction at 298 K: $Ni\,(s) + 2\,Ag^+\,(aq) \rightarrow Ni^{2+}\,(aq) + 2\,Ag\,(s)$ Given: $E^\circ_{Ni^{2+}/Ni} = -0.25$ V, $E^\circ_{Ag^+/Ag} = +0.80$ V $1\,F = 96500$ C $mol^{-1}$

> [!TLDR] > The maximum work is the negative of the Gibbs free energy change, found from the cell’s standard EMF via $\Delta G^\circ = -nFE^\circ_\text{cell}$. For this reaction, $E^\circ_\text{cell} = 1.05$ V, $n = 2$, giving $\Delta G^\circ = -202.65$ kJ/mol, so maximum work = $202.65$ kJ. Then $\log K_c = \frac{nE^\circ_\text{cell}}{0.059} \approx 35.59$. The core idea here is that a spontaneous electrochemical reaction can do electrical work. The maximum work obtainable from the cell (under standard conditions) equals the decrease in Gibbs free energy, $-\Delta G^\circ$. And $\Delta G^\circ$ is directly linked to the standard cell potential by $\Delta G^\circ = -nFE^\circ_\text{cell}$. Once you have $\Delta G^\circ$, the equilibrium constant $K_c$ follows from $\Delta G^\circ = -RT \ln K_c$. Let’s walk through it. 1. **Find the standard cell potential $E^\circ_\text{cell}$.** The cell reaction is: $\text{Ni(s)} + 2\text{Ag}^+(aq) \rightarrow \text{Ni}^{2+}(aq) + 2\text{Ag(s)}$ Nickel is being oxidised (anode) and silver ions are being reduced (cathode). Standard reduction potentials are given: $E^\circ_{\text{Ni}^{2+}/\text{Ni}} = -0.25$ V (this is the reduction potential for Ni²⁺ + 2e⁻ → Ni) $E^\circ_{\text{Ag}^+/\text{Ag}} = +0.80$ V (for Ag⁺ + e⁻ → Ag) The cell potential is: $$E^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode}$$ Here, the cathode is the Ag⁺/Ag half-cell (reduction happens there) and the anode is the Ni²⁺/Ni half-cell (oxidation happens there). So: $$E^\circ_\text{cell} = 0.80 - (-0.25) = 1.05 \text{ V}$$ > [!TIP] > A quick check: the reaction is spontaneous as written because $E^\circ_\text{cell} > 0$. Nickel is above silver in the reactivity series — it displaces Ag⁺ from solution. 2. **Determine $n$, the number of moles of electrons transferred.** From the balanced equation: $\text{Ni} \rightarrow \text{Ni}^{2+} + 2e^-$ (oxidation) $2\text{Ag}^+ +

Calculate the maximum work and log Kc for the given reaction at 298 K: Ni(s) + 2Ag^+(aq) arrow Ni²⁺(aq) + 2Ag(

Question

\log K_c

CBSECBSE Class XII Board 2020Subjective· 3mImportance★★★★★

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Cell Representation Nernst Equation

Cell Representation and the Nernst Equation: From Intuition to Precision

Imagine you have a Daniell cell — a zinc rod in zinc sulphate solution connected by a salt bridge to a copper rod in copper sulphate solution. You know it produces a voltage. But what happens if you dilute the copper sulphate solution? Or if you change the temperature? The voltage changes. The Nernst equation is the tool that tells you exactly how much it changes.

The Intuition First

A battery works because the two half-cells "want" to react — zinc wants to lose electrons, copper ions want to gain them. This "want" is measured as a tendency, or potential. But the strength of that tendency depends on how crowded the ions are.

Think of it like this: If you have a room full of people who all want to leave (like zinc ions wanting to form), the push to get out is stronger when the room is packed. If the room is nearly empty, the push is weaker. Similarly, for copper ions wanting to enter the metal (gain electrons), the pull is stronger when there are many copper ions around, and weaker when there are few.

The Nernst equation quantifies this: the actual cell potential depends on the concentrations (or activities) of the ions involved.

The Precise Statement

For a general cell reaction:

aA + bB \rightarrow cC + dD

The cell potential $E$ under non-standard conditions is given by:

E = E^\circ - \frac{RT}{nF} \ln Q

Where:

$E$ = cell potential under the given conditions (in volts)
$E^\circ$ = standard cell potential (when all reactants/products are at 1 M, 1 atm, 25°C)
$R$ = universal gas constant (8.314 J/mol·K)
$T$ = temperature in Kelvin
$n$ = number of moles of electrons transferred in the balanced half-reactions
$F$ = Faraday constant (96,485 C/mol)
$Q$ = reaction quotient = $\frac{[C]^c [D]^d}{[A]^a [B]^b}$ (using concentrations for dilute solutions)

At 25°C (298 K), the equation simplifies to a very practical form:

E = E^\circ - \frac{0.0591}{n} \log_{10} Q

The 0.0591 comes from $\frac{2.303RT}{F}$ at 298 K. Notice it uses $\log_{10}$ (common log), not natural log.

Cell Representation: How We Write It

In electrochemistry, we represent a cell with a shorthand notation. For the Daniell cell:

\text{Zn(s)} \mid \text{Zn}^{2+}(\text{aq}) \parallel \text{Cu}^{2+}(\text{aq}) \mid \text{Cu(s)}

The single vertical line $\mid$ represents a phase boundary (solid electrode | solution). The double line $\parallel$ represents the salt bridge.

The anode (oxidation) is written on the left, the cathode (reduction) on the right. Electrons flow from left to right in the external circuit.

Applying the Nernst Equation to a Cell Representation

For the Daniell cell, the half-reactions are:

Anode (oxidation): $\text{Zn(s)} \rightarrow \text{Zn}^{2+}(\text{aq}) + 2e^-$
Cathode (reduction): $\text{Cu}^{2+}(\text{aq}) + 2e^- \rightarrow \text{Cu(s)}$

Overall: $\text{Zn(s)} + \text{Cu}^{2+}(\text{aq}) \rightarrow \text{Zn}^{2+}(\text{aq}) + \text{Cu(s)}$

Here $n = 2$ (two electrons transferred). The reaction quotient is:

Q = \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]}

So the Nernst equation becomes:

E = E^\circ - \frac{0.0591}{2} \log_{10} \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]}

Note

Solids (Zn, Cu) do not appear in $Q$ because their concentrations are constant (activity = 1).

A Worked Example

Suppose you have a Daniell cell where $[\text{Zn}^{2+}] = 0.1$ M and $[\text{Cu}^{2+}] = 1.0$ M at 25°C. $E^\circ$ for the cell is 1.10 V.

$E = 1.10 - \frac{0.0591}{2} \log_{10} \frac{0.1}{1.0}$ …

Why this formula?

Cell Representation & the Nernst Equation: Why It Works

The Core Question

Why does a cell's voltage change when concentrations change? The Nernst equation answers this — but the reason lies in the link between chemical free energy and electrical work.

1. The Fundamental Link: Gibbs Free Energy & Cell Potential

A galvanic cell does electrical work. The maximum useful work a cell can do equals the change in Gibbs free energy ( $\Delta G$ ):

\Delta G = -nFE_{\text{cell}}

Where:

$n$ = moles of electrons transferred
$F$ = Faraday constant ( $96,485 \, \text{C mol}^{-1}$ )
$E_{\text{cell}}$ = cell potential (volts)

Why negative? A spontaneous reaction has $\Delta G < 0$ and $E_{\text{cell}} > 0$ — the negative sign makes this consistent.

2. The Chemical Side: $\Delta G$ Depends on Concentration

For a general redox reaction:

aA + bB \rightarrow cC + dD

The Gibbs free energy under non-standard conditions is:

\Delta G = \Delta G^\circ + RT \ln Q

Where $Q$ is the reaction quotient:

Q = \frac{[C]^c [D]^d}{[A]^a [B]^b}

Why this form? It comes from the relationship between chemical potential and concentration — the entropy of mixing drives concentration dependence.

3. Combining Both Sides: The Derivation

Set the electrical work equal to the chemical free energy change:

-nFE_{\text{cell}} = -nFE^\circ_{\text{cell}} + RT \ln Q

Divide both sides by $-nF$ :

E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{RT}{nF} \ln Q

This is the Nernst equation.

4. The "Why" in Plain Terms

Concept	Physical Meaning
$E^\circ_{\text{cell}}$	Voltage when all species are at 1 M (standard state)
$-\frac{RT}{nF} \ln Q$	Correction factor — adjusts voltage for real concentrations
$Q$	Tells you how far the reaction is from equilibrium

Key insight: When $Q = K$ (equilibrium), $E_{\text{cell}} = 0$ — the battery is dead because no net reaction occurs.

5. The Common Form (log base 10)

At $25^\circ \text{C}$ ( $298 \, \text{K}$ ):

\frac{RT}{F} \ln 10 \approx 0.0592 \, \text{V}

So:

E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592}{n} \log_{10} Q

Why convert to log? Exam convenience — most concentration values are powers of 10.

--- …

Start your 14-day free trial to unlock the full solution →

The maximum work is the negative of the Gibbs free energy change, found from the cell’s standard EMF via $\Delta G^\circ = -nFE^\circ_\text{cell}$ . For this reaction, $E^\circ_\text{cell} = 1.05$ V, $n = 2$ , giving $\Delta G^\circ = -202.65$ kJ/mol, so maximum work = $202.65$ kJ. Then $\log K_c = \frac{nE^\circ_\text{cell}}{0.059} \approx 35.59$ .

The core idea here is that a spontaneous electrochemical reaction can do electrical work. The maximum work obtainable from the cell (under standard conditions) equals the decrease in Gibbs free energy, $-\Delta G^\circ$ . And $\Delta G^\circ$ is directly linked to the standard cell potential by $\Delta G^\circ = -nFE^\circ_\text{cell}$ . Once you have $\Delta G^\circ$ , the equilibrium constant $K_c$ follows from $\Delta G^\circ = -RT \ln K_c$ .

Let’s walk through it.

Find the standard cell potential $E^\circ_\text{cell}$ .

The cell reaction is:

$\text{Ni(s)} + 2\text{Ag}^+(aq) \rightarrow \text{Ni}^{2+}(aq) + 2\text{Ag(s)}$

Nickel is being oxidised (anode) and silver ions are being reduced (cathode).

Standard reduction potentials are given:

$E^\circ_{\text{Ni}^{2+}/\text{Ni}} = -0.25$ V (this is the reduction potential for Ni²⁺ + 2e⁻ → Ni)

$E^\circ_{\text{Ag}^+/\text{Ag}} = +0.80$ V (for Ag⁺ + e⁻ → Ag)

The cell potential is:

E^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode}

Here, the cathode is the Ag⁺/Ag half-cell (reduction happens there) and the anode is the Ni²⁺/Ni half-cell (oxidation happens there). So:

E^\circ_\text{cell} = 0.80 - (-0.25) = 1.05 \text{ V}

Tip

A quick check: the reaction is spontaneous as written because $E^\circ_\text{cell} > 0$ . Nickel is above silver in the reactivity series — it displaces Ag⁺ from solution.

Determine $n$ , the number of moles of electrons transferred.

From the balanced equation:

$\text{Ni} \rightarrow \text{Ni}^{2+} + 2e^-$ (oxidation)

$2\text{Ag}^+ + 2e^- \rightarrow 2\text{Ag}$ (reduction)

So $n = 2$ moles of electrons flow per mole of reaction as written.
Calculate $\Delta G^\circ$ and hence the maximum work.

The standard Gibbs free energy change is:

\Delta G^\circ = -nFE^\circ_\text{cell}

Substitute $n = 2$ , $F = 96500$ C/mol, $E^\circ_\text{cell} = 1.05$ V:

\Delta G^\circ = -2 \times 96500 \times 1.05

\Delta G^\circ = -202650 \text{ J/mol} = -202.65 \text{ kJ/mol}

The maximum work that can be obtained from the cell (under standard conditions) is the negative of $\Delta G^\circ$ , i.e., $-\Delta G^\circ$ .

\text{Maximum work} = 202.65 \text{ kJ}

Watch out

A common mistake is to forget the sign. $\Delta G^\circ$ is negative for a spontaneous reaction, so the work done by the system is positive. Maximum work = $-\Delta G^\circ$ , not $\Delta G^\circ$ itself.

Calculate $\log K_c$ . …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

Showing the 12 most recent of 14 on this concept.

CBSE 2026Set ANNUAL1 mark
$Q. What is the potential difference between the two electrodes of the galvanic cell called?$
›Reveal solutionSolution

The potential difference between the two electrodes of a galvanic cell (measured when no current is drawn) is called the electromotive force (EMF) or cell potential, $E_{\text{cell}}$ .

Concept. In a galvanic (voltaic) cell, the two half-cells are at different electrode potentials. The difference between the cathode and anode potentials is what pushes electrons through the external circuit:

$E_{\text{cell}} = E_{\text{cathode}} - E_{\text{anode}}$

…

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 markMCQ
$Q. Consider the following statements about a reaction at equilibrium: A(g) + B(g) \leftrightarrow C(g). Statement I: Adding an inert gas at constant volume will shift the equilibrium to the right. Statement II: A catalyst changes the position of equilibrium.$
(a) i) Both statement I and II are correct
(b) ii) Both statement I and II are incorrect
(c) iii) Statement I is correct and statement II is incorrect
(d) iv) Statement I is incorrect and statement II is correct
›Reveal solutionSolution
[!TLDR]

ii) Both statement I and II are incorrect

Why

Adding an inert gas at constant volume does not change partial pressures/concentrations of reacting species, so it does not shift equilibrium (Statement I false). A catalyst speeds up attainment of equilibrium equally in …
Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 mark
$Zn(s)+Cu^{2+}(aq) \rightarrow Zn^{2+}(aq)+Cu(s)$
›Reveal solutionSolution
An external potential exactly equal and opposite to the cell's own EMF brings the system to balance, so no net current flows in either direction — this is the basis of potentiometric EMF measurement.

The Daniell-type cell $Zn(s)|Zn^{2+}(aq)\|Cu^{2+}(aq)|Cu(s)$ spontaneously drives current in the galvanic direction (electrons flow from Zn anode to Cu cathode through the external circuit) with an EMF of 1.1 V under standard conditions.

If an external opposing potential is applied, it works against this spontaneous cell reaction:

If the external potential is less than 1.1 V, the cell's own EMF still dominates, and current continues to flow in the original (galvanic) direction, though at a reduced magnitude.

If the external potential is greater than 1.1 V, it overpowers the cell's own EMF, and current is forced to flow in the reverse direction (the cell now behaves as an electrolytic cell, being charged/driven backward). …
Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. The correct statement in a cell of zinc and copper is$
(a) zinc acts as cathode and copper as anode
(b) zinc acts as anode and copper as cathode
(c) the standard reduction potential of zinc is more than that of copper
(d) the flow of electrons is from copper to zinc
›Reveal solutionSolution

Zinc has a lower (more negative) standard reduction potential than copper, so it is oxidized (anode) while copper is reduced (cathode).

In a Daniell-type zinc–copper cell, E°(Zn²⁺/Zn) = −0.76 V is lower than E°(Cu²⁺/Cu) = +0.34 V. The electrode with the lower (more negative) reduction potential is oxidized — zinc loses electrons and acts as the anode (Zn → Zn²⁺ + 2e⁻) — while the electrode with the higher reduction potential is reduced — copper gains electrons and acts as the cathode (Cu²⁺ + 2e⁻ → Cu). Electrons flow …

Start your 14-day free trial to see the full solution →
CBSE 2024Set D1 markMCQ
$Q. The electromotive force of the cell Zn | ZnSO4 || CuSO4 | Cu is 1.1 volt. Its cathode is$
(a) Zn
(b) Cu
(c) ZnSO4
(d) CuSO4
›Reveal solutionSolution
Reduction happens at the cathode; Cu2+ is reduced to Cu, so Cu is the cathode.

In the Daniell cell Zn | ZnSO4 || CuSO4 | Cu:

Anode (oxidation, left): Zn -> Zn2+ + 2e-

Cathode (reduction, right): Cu2+ + 2e- -> Cu …
Start your 14-day free trial to see the full solution →
CBSE 2024Set ANNUAL1 markMCQ
$Q. An electrochemical cell can behave like an electrolytic cell when _______.$
(a) Ecell = 0
(b) Ecell > Eext
(c) Eext > Ecell
(d) Ecell = Eext
›Reveal solutionSolution
A galvanic (electrochemical) cell starts behaving like an electrolytic cell when an external potential greater than the cell's own emf is applied against it, reversing the direction of current flow.

Consider a Daniell cell: Zn(s) | Zn2+(aq) || Cu2+(aq) | Cu(s), which normally works as a galvanic cell producing a cell potential Ecell, with electrons flowing from Zn (anode) to Cu (cathode) through the external circuit.

If an external opposing emf (Eext) is applied to this cell:

When Eext < Ecell, the cell continues to work as a galvanic cell, but the current decreases.

When Eext = Ecell, no current flows through the cell (this is used to measure the cell's emf accurately, e.g. using a potentiometer). …
Start your 14-day free trial to see the full solution →
CBSE 2024Set ANNUAL1 mark
$Q. Write True/False: A hydrogen bridge is used to maintain continuity of ion flow in a Daniell cell.$
›Reveal solutionSolution

This statement is FALSE. A Daniell cell uses a salt bridge (e.g. containing KCl or KNO3 in agar-agar gel), not any "hydrogen bridge", to complete the internal circuit.

A Daniell cell consists of a Zn electrode dipped in ZnSO4 solution (anode) and a Cu electrode dipped in CuSO4 solution (cathode), connected externally by a wire and internally by a salt bridge. The salt bridge allows ions to migrate between the two half-cells, maintaining electrical neutrality in each compartment as the cell reaction proceeds, and completes the internal circuit …

Start your 14-day free trial to see the full solution →
CBSE 2023Set 56/1/11 markMCQ
$Zn + 2Ag^+ \rightarrow Zn^{2+} + 2Ag$
›Reveal solutionSolution
By convention the anode (oxidation) is written on the left and the cathode (reduction) on the right. Zinc is oxidised and silver ions are reduced, so the cell is $Zn \mid Zn^{2+} \parallel Ag^+ \mid Ag$ — option (D).

A cell diagram is written anode (left) $\parallel$ cathode (right), with each half-cell running from the electrode metal outward and the double bar $\parallel$ marking the salt bridge.

For the reaction
$Zn + 2Ag^+ \rightarrow Zn^{2+} + 2Ag$

Zinc loses electrons: $Zn \rightarrow Zn^{2+} + 2e^-$ (oxidation, anode, left).

Silver ions gain electrons: $Ag^+ + e^- \rightarrow Ag$ (reduction, cathode, right).

Writing the anode as metal $\mid$ ion and the cathode as ion $\mid$ metal gives
$Zn \mid Zn^{2+} \parallel Ag^+ \mid Ag$
Checking the options: …
Start your 14-day free trial to see the full solution →
CBSE 2022Set E1 markMCQ
$Q. The standard electrode potentials for the following reactions are given ( At 25°C ): Ag+(aq) + e- -> Ag(s), E° Ag+/Ag = +0.80 V ; Sn2+(aq) + 2e -> Sn(s), E° Sn2+/Sn = -0.14 V. The electromotive force (EMF) of the given cell Sn | Sn2+ (1M) || Ag+ (1M) | Ag is$
(a) 0.66 V
(b) 0.80 V
(c) 1.08 V
(d) 0.94 V
›Reveal solutionSolution
For Sn | Sn2+ || Ag+ | Ag, EMF = E°(Ag+/Ag) - E°(Sn2+/Sn) = 0.80 - (-0.14) = 0.94 V.

In the cell notation the left electrode is the anode (oxidation) and the right is the cathode (reduction):

Cathode (reduction): Ag+ + e- -> Ag, E° = +0.80 V

Anode (oxidation): Sn -> Sn2+ + 2e-, E°(Sn2+/Sn) = -0.14 V

E°cell = E°cathode - E°anode = (+0.80) - (-0.14) = +0.94 V.

…
Start your 14-day free trial to see the full solution →
CBSE 2022Set ANNUAL1 markMCQ
$Q. Which one of the following statements is incorrect for a voltaic cell ?$
(a) It converts chemical energy to electrical energy.
(b) It uses electrical energy to carry out chemical changes.
(c) It is based on a redox reaction.
(d) It has $-\Delta G$ .
›Reveal solutionSolution
A voltaic cell produces electricity from a spontaneous redox reaction — it does not consume electrical energy, so statement (b) describes an electrolytic cell instead.

Checking each option against what a voltaic (galvanic) cell actually does:

(a) True — a voltaic cell converts chemical energy into electrical energy.

(b) False — this describes an electrolytic cell, which uses externally supplied electrical energy to force a non-spontaneous chemical change. A voltaic cell does the opposite. …
Start your 14-day free trial to see the full solution →
CBSE 2022Set ANNUAL1 markMCQ
$Mg\,|\,Mg^{2+}\,||\,Cu^{2+}\,|\,Cu$
(a) $Mg$ as cathode
(b) $Cu$ as cathode
(c) $Cu$ is oxidizing agent
(d) None of the above
›Reveal solutionSolution
By IUPAC convention the electrode written on the LEFT of a cell is the anode and the one on the RIGHT is the cathode. Here Mg is the anode and Cu is the cathode. Option (B).

The cell is written as $Mg\,|\,Mg^{2+}\,||\,Cu^{2+}\,|\,Cu$ .

Convention: anode (negative, oxidation) is written on the left; cathode (positive, reduction) is written on the right.

The electrode reactions are:

Anode (Mg, oxidation): $Mg \rightarrow Mg^{2+} + 2e^-$

Cathode (Cu, reduction): $Cu^{2+} + 2e^- \rightarrow Cu$ …
Start your 14-day free trial to see the full solution →
CBSE 2021Set A1 markMCQ
$Q. Zn(s) | Zn2+(aq) || Cu2+(aq) | Cu(s) is$
(a) Weston cell
(b) Daniel cell
(c) Calomel cell
(d) None of these
›Reveal solutionSolution
A zinc-copper galvanic cell with this notation is the Daniell cell.

The cell Zn(s) | Zn2+(aq) || Cu2+(aq) | Cu(s) is the Daniell cell, a galvanic (voltaic) cell.

At the anode (LHS): Zn(s) → Zn2+ + 2e- (oxidation).

At the cathode (RHS): Cu2+ + 2e- → Cu(s) (reduction). …
Start your 14-day free trial to see the full solution →

🎓Unlock everything free for 14 days

Unlock everything free for 14 days