Q.Show that the right circular cone of least curved surface and given volume has an altitude equal to 2 time the radius of the base.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Optimization Word Problem
Optimization Word Problems
Imagine planning a garden with 40 metres of fencing and wanting the largest rectangular area. A long, thin rectangle wastes space; a square feels roomier; somewhere in between lies the best shape. That is an optimisation problem — a fixed resource and a quantity to make as large (or as small) as possible.
Every optimisation word problem has the same skeleton: the best outcome — maximum area, minimum cost, largest volume, shortest time — under a constraint — limited material, a fixed budget, a given perimeter.
The Plan of Attack
The problem gives you a story, not a graph. Your job is to turn it into a single-variable function and find its peak or valley:
- Name the quantity to optimise — call it Q, and write it using variables.
- Find the constraint — a relation between those variables (e.g. "perimeter =40").
- Reduce to one variable — use the constraint to eliminate the rest.
- Differentiate — solve Q′(x)=0 to find the critical points.
- Confirm — use Q′′(x)<0 for a maximum or Q′′(x)>0 for a minimum.
- Answer the question asked — give the actual dimensions/cost, not just x.
In board exams these problems almost always reduce to a quadratic or cubic. Once Q(x) is written, the calculus is mechanical.
The Garden, Worked
40 m of fencing encloses a rectangle; maximise the area.
- Objective: A=lw.
- Constraint: 2l+2w=40, so l+w=20.
- Reduce: w=20−l, giving A(l)=l(20−l)=20l−l2.
- Differentiate: A′(l)=20−2l=0⟹l=10.
- Confirm: A′′(l)=−2<0, a maximum.
So l=w=10 m — a 10 m × 10 m square.
A common slip: solving A′(l)=0 and stopping. Always check max vs min, and answer in the units asked.
The Common Families
| Problem type | Typical objective | Typical constraint |
|--------------|-------------------|--------------------| …
Idea: Fix the volume, write the curved surface area as a function of one variable, and minimise it with single-variable calculus (no Lagrange needed).
Let the cone have base radius r, height h, slant height l=r2+h2.
- Curved surface area: S=πrl=πrr2+h2.
- Given (fixed) volume: V=31πr2h ⇒ h=πr23V.
Minimising S is the same as minimising S2=π2r2(r2+h2)=π2r4+π2r2h2. Substitute h2=π2r49V2:
f(r)=S2=π2r4+r29V2.
Differentiate and set to zero:
f′(r)=4π2r3−r318V2=0 ⇒ r6=2π29V2.
Now use h2=π2r49V2, so …
Writing the curved surface area of a fixed-volume cone in one variable and minimising it gives h2=2r2, so the altitude equals 2 times the base radius.
What we are asked
Among all right circular cones of the same volume, find the one with the smallest curved surface area, and show its height h satisfies h=2r, where r is the base radius.
Setting up the two facts
For a right circular cone with radius r, height h and slant height l:
- slant height: l=r2+h2,
- curved surface area (what we minimise): S=πrl=πrr2+h2,
- volume (what is fixed): V=31πr2h.
The volume V is a given constant, so the two variables r and h are not free — they are linked. From the volume,
h=πr23V⇒h2=π2r49V2.(1)
This lets us turn S into a function of the single variable r.
A neat trick: minimise S2
Square roots are awkward to differentiate, and S>0, so minimising S is exactly the same as minimising S2:
S2=π2r2(r2+h2)=π2r4+π2r2h2.
Now put in (1), π2r2h2=π2r2⋅π2r49V2=r29V2:
f(r):=S2=π2r4+r29V2.
Find the critical point
Differentiate with respect to r:
f′(r)=4π2r3−r318V2.
Set f′(r)=0:
4π2r3=r318V2 ⇒ 4π2r6=18V2 ⇒ r6=2π29V2.(2)
Read off the ratio h/r …
Method: Minimizing a Surface Expression That Contains a Square Root (the "Minimize S2" Trick)
Whenever the quantity you must optimize involves a square root — most often because it comes from a slant height l=r2+h2 — differentiating it directly is messy and error-prone. This method removes the square root before differentiating.
Steps
Step 1: Write the objective and the constraint using the solid's standard formulas
For a right circular cone with base radius r, height h, and slant height l=r2+h2:
Scurved=πrl=πrr2+h2(to minimize),V=31πr2h(fixed)
Step 2: Use the constraint to eliminate one variable
Solve the fixed-volume equation for h in terms of r (and the constant V):
h=πr23V
Step 3: Minimize S2 instead of S
Since S>0, the value of r that minimizes S is exactly the value that minimizes S2 — and S2=π2r2(r2+h2) has no square root, so it differentiates cleanly. Substitute the h from Step 2 to get S2 as a function of r alone.
Step 4: Differentiate, set to zero, and solve …
Common Mistakes
Mistake 1: Differentiating S=πrr2+h2 directly instead of squaring first
Differentiating a product involving a square root (using the product and chain rules together) is far more error-prone than differentiating the algebraically simpler S2. A student who insists on differentiating S directly is much more likely to drop a factor or mishandle the chain rule.
Mistake 2: Confusing "curved surface area" with "total surface area"
This chapter contains near-identical problems that ask for the curved surface (πrl) versus the total surface (πr2+πrl, including the base). Using the wrong formula for "surface area" gives a completely different optimal ratio between h and r — always re-read exactly which surface the question means. …
- CBSE 2026Set ANNUAL1 markQ.(Continuing the aluminium-box case study of Q.38) What will be the dimensions of the largest box?
›Reveal solutionSolution
Substitute the optimal square side x=32 m (found by maximising the volume function) into the length, breadth and height expressions.
From the case study, cutting a square of side x from each corner of the 3 m×8 m sheet and folding up the sides gives a box of:
- Length =(8−2x) m
- Breadth =(3−2x) m
- Height =x m
Maximising V(x)=x(3−2x)(8−2x)=4x3−22x2+24x using V′(x)=12x2−44x+24=0 (i.e. 3x2−11x+6=0) gives roots x=3 or x=32. Since 0<x<1.5 is required for the box to be valid, the admissible root is x=32, and V′′(32)=−28<0 confirms this is the maximum.
Substituting x=32:
Length=8−2(32)=8−34=320 m …
- CBSE 2026Set ANNUAL1 markQ.(Continuing the aluminium-box case study of Q.38) What will be the side of the square removed to form the largest box?
›Reveal solutionSolution
The optimal square side is the critical point of the volume function that lies in the valid domain and satisfies the second-derivative maximum test.
For a square of side x removed from each corner of the 3 m×8 m sheet, the box volume is:
V(x)=x(3−2x)(8−2x)=4x3−22x2+24x,0<x<1.5
Differentiating and setting V′(x)=0:
V′(x)=12x2−44x+24=0⟹3x2−11x+6=0
x=611±121−72=611±7⟹x=3 or x=32
Since the breadth (3−2x) must stay positive, only x<1.5 is valid, so x=3 is rejected and x=32 is the only admissible critical point.
Confirming it is a maximum: …
- CBSE 2025Set ANNUAL1 markQ.A gardener plans to plant flowers in a rectangular flower bed in such a way that a rectangle is inscribed in the semi-circular field (as shown in the figure). Radius of the semi-circular field is 30 m. Let the length of the rectangle be PQ = x m. Based on above information answer the following: What will be the breadth of the rectangular flower bed in terms of x?
›Reveal solutionSolution
The rectangle's top corners lie on the semicircle of radius 30, so the Pythagorean relation between half the length and the breadth gives the breadth as a function of x.
Place the centre O of the semicircle at the origin, with the diameter along the x-axis. Since the rectangle PQRS is symmetric about O with top side PQ=x, the top corners P,Q are at horizontal distance x/2 from O. Let the breadth (height of the rectangle) be b. …
- CBSE 2025Set ANNUAL1 markQ.A gardener plans to plant flowers in a rectangular flower bed in such a way that a rectangle is inscribed in the semi-circular field (as shown in the figure). Radius of the semi-circular field is 30 m. Let the length of the rectangle be PQ = x m. Based on above information answer the following: What will be the area of rectangular region as a function of x?
›Reveal solutionSolution
Area = length × breadth, using the breadth found in terms of x.
The rectangle has length PQ=x and breadth b=900−x2/4 (from the semicircle constraint). So the area is …
- CBSE 2025Set ANNUAL1 markQ.A gardener plans to plant flowers in a rectangular flower bed in such a way that a rectangle is inscribed in the semi-circular field (as shown in the figure). Radius of the semi-circular field is 30 m. Let the length of the rectangle be PQ = x m. Based on above information answer the following: Gardener wants maximum area for the rectangular flower bed. For this to happen, what will be the value of x?
›Reveal solutionSolution
Maximize A(x)2 (equivalent and algebraically simpler) by setting its derivative to zero.
From A(x)=x900−x2/4, consider A2=x2(900−4x2)=900x2−4x4 (maximizing A2 maximizes A since A≥0).
dxd(A2)=1800x−x3=x(1800−x2)
Setting this to zero: x=0 (rejected, gives zero area) or x2=1800⇒x=1800=302.
…
- CBSE 2025Set ANNUAL1 markQ.A gardener plans to plant flowers in a rectangular flower bed in such a way that a rectangle is inscribed in the semi-circular field (as shown in the figure). Radius of the semi-circular field is 30 m. Let the length of the rectangle be PQ = x m. Based on above information answer the following: What will be the area of remaining field (in sq. m) after having the flower bed of maximum area?
›Reveal solutionSolution
Subtract the maximum rectangle area from the total semicircular field area.
Total area of the semicircular field: 21πr2=21π(30)2=450π sq. m.
At maximum, x=302, so breadth b=900−4(302)2=900−41800=900−450=450=152.
…
- CBSE 2024Set ANNUAL1 markQ.[Case study] Let a cone be inscribed in a sphere of radius R. The height and radius of the cone are h and r respectively; x denotes the distance from the sphere's centre O to the centre of the cone's base. Write the relation between r and R in terms of x.
›Reveal solutionSolution
r2=R2−x2.
From the figure, O is the sphere's centre, C is the centre of the cone's circular base, OC=x, CA=r (radius of the cone's base), and OA=R (a radius of the sphere, since A lies on the sphere).
…
- CBSE 2024Set ANNUAL1 markQ.[Case study, same setup as above — cone of height h, radius r inscribed in a sphere of radius R, with x the distance from the sphere's centre to the cone's base] Write the volume V of the cone in terms of R and x.
›Reveal solutionSolution
V=3π(R+x)2(R−x).
From the figure, the cone's height is h=R+x (from the base at C up to the apex D at the top of the sphere), and from the previous part, r2=R2−x2.
Volume of a cone: V=31πr2h. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.