Q.Explain with two examples each of the following: coordination entity, ligand, coordination number, coordination polyhedron, homoleptic and heteroleptic.
Concept understanding — Geometrical Isomerism Conditions
Geometrical Isomerism: The Intuition
Imagine you have two friends standing on opposite sides of a door. If the door is open, they can walk around and swap places easily — there's no real difference between who is on the left and who is on the right. But if the door is locked shut, they are stuck. One is permanently on the left side, the other on the right. That locked door creates two distinct arrangements: Friend A on the left, Friend B on the right versus Friend A on the right, Friend B on the left.
That locked door is the key idea behind geometrical isomerism.
In chemistry, molecules are three-dimensional. Atoms connected by a single bond can rotate freely — like an open door. But a double bond (or a ring structure) locks the atoms in place. If you have two different groups attached to each carbon of a double bond, you get two distinct spatial arrangements that cannot interconvert without breaking the bond. These are geometrical isomers (also called cis-trans or E-Z isomers).
The Precise Conditions
For a molecule to show geometrical isomerism, it must satisfy two conditions simultaneously:
Condition 1: There must be a restricted rotation around a bond — typically a carbon-carbon double bond (C=C) or a ring structure.
Condition 2: Each of the two atoms (or groups) involved in that restricted rotation must have two different substituents attached to it.
Let's unpack each.
Condition 1: Restricted Rotation
A single bond (C−C) allows free rotation — the atoms spin around the bond axis like a wheel. So no geometrical isomers exist there. A double bond (C=C) has a pi (π) bond that locks the molecule flat. Rotation would break the π bond, which requires a lot of energy (about 250–270 kJ/mol). At room temperature, this rotation simply does not happen.
Rings (like cyclopropane, cyclobutane, etc.) also restrict rotation because the ring is a closed loop — atoms cannot rotate past each other without breaking the ring.
Condition 2: Two Different Substituents on Each End
This is the "different groups" rule. Look at each carbon of the double bond (or each ring carbon involved). If both carbons have two different groups attached, geometrical isomers exist. If even one carbon has two identical groups, there is only one possible arrangement.
A common mistake: students check only one carbon. Both carbons must have two different substituents. If one carbon has two identical groups (like two hydrogens), the molecule is identical in both arrangements — no isomerism.
How to Check: A Step-by-Step Method
Take any molecule with a double bond. Follow these steps:
- Identify the double bond (or ring). Mark the two carbon atoms involved.
- List the two groups attached to the first carbon. Are they different from each other? If yes, proceed. If no → no geometrical isomerism.
- List the two groups attached to the second carbon. Are they different from each other? If yes → geometrical isomerism exists. If no → no geometrical isomerism.
If the two groups on a carbon are identical, the molecule is symmetric about that carbon. Flipping the other side gives the same molecule — no isomers.
Examples to Cement the Idea
Example 1: But-2-ene (CH3CH=CHCH3)
- Carbon 1 of the double bond: attached to CH3 and H → different ✓
- Carbon 2 of the double bond: attached to CH3 and H → different ✓
Result: Two geometrical isomers exist — cis (both methyl groups on the same side) and trans (methyl groups on opposite sides).
Example 2: 1,2-Dichloroethene (ClCH=CHCl)
- Carbon 1: attached to Cl and H → different ✓
- Carbon 2: attached to Cl and H → different ✓
Result: cis and trans isomers exist.
Example 3: 1,1-Dichloroethene (Cl2C=CH2)
- Carbon 1: attached to Cl and Cl → identical ✗
Result: No geometrical isomerism. Both doubly-bonded carbons carry two identical substituents (H and H on one, Cl and Cl on the other in 1,1-dichloroethene) — geometrical isomerism requires each double-bond carbon to carry two DIFFERENT groups, and neither one here does. The molecule is the same no matter how you look at it.
Example 4: Cyclopropane-1,2-dicarboxylic acid (a ring)
- The ring restricts rotation.
- Carbon 1: attached to COOH and H → different ✓
- Carbon 2: attached to COOH and H → different ✓
Result: cis and trans isomers exist (both carboxylic acid groups on same side vs opposite sides of the ring).
The Naming: cis-trans vs E-Z
For simple cases where the two identical groups are on the same side (like both methyl groups), we use cis (same side) and trans (opposite sides). But when all four substituents are different, cis-trans fails — you need the E-Z system (based on priority rules from Cahn-Ingold-Prelog). That's a separate topic, but the condition for geometrical isomerism remains the same.
Geometrical isomerism requires:
- Restricted rotation (double bond or ring)
- Two different substituents on each of the two atoms involved
If both conditions hold, the molecule exists as two distinct spatial isomers that differ in physical properties (melting point, boiling point, polarity) and often in biological activity.
The conditions required for geometrical isomerism are covered in both the NCERT/CBSE Class 11 Organic Chemistry and Class 12 Coordination Compounds chapters, and ‘conditions for geometrical isomerism’ is a commonly searched important-question topic for board exams, JEE Main and NEET. Applying these two conditions correctly to both alkenes and coordination complexes is a skill tested across multiple competitive-exam chemistry sections.
Why this formula?
Geometrical Isomerism: Why the Conditions Hold
Geometrical isomerism (also called cis-trans or E-Z isomerism) arises when atoms or groups are arranged differently in space around a rigid part of a molecule — typically a double bond or a ring. The key is that rotation is restricted, so the spatial positions become fixed and distinct.
Let’s break down why the conditions are what they are.
1. The Core Requirement: Restricted Rotation
For two molecules to be geometrical isomers, they must have the same connectivity but different spatial arrangement due to a barrier to rotation.
- Double bonds (C=C): The π-bond locks the two carbons in place — rotation requires breaking the π-bond (energy ~250 kJ/mol), so it doesn’t happen at room temperature.
- Rings (e.g., cycloalkanes): The ring structure physically prevents free rotation about C–C single bonds within the ring.
Why this matters: Without restricted rotation, the molecule would freely interconvert between arrangements — no distinct isomers exist.
2. Condition 1: Two Different Groups on Each Carbon (for C=C)
Consider a general alkene:
C=C
Each carbon must have two different substituents (not counting the other carbon of the double bond).
Why?
- If one carbon has two identical groups (e.g., both H), then swapping the groups on that carbon produces the same molecule — no isomerism.
Example:
- 1,2-dichloroethene (ClHC=CHCl): Each carbon has H and Cl (different) → geometrical isomers exist.
- 1,1-dichloroethene (Cl2C=CH2): One carbon has two Cl (identical) → no geometrical isomers.
Formal condition:
For a C=C bond, geometrical isomerism is possible iff each doubly bonded carbon bears two different substituents.
3. Condition 2: For Rings — Similar Logic
In a ring (e.g., cyclopropane, cyclohexane), the ring itself restricts rotation. Here, geometrical isomerism occurs when two substituents on different ring carbons can be on the same side (cis) or opposite sides (trans).
Why?
- The ring is a closed loop — you cannot rotate one carbon relative to another without breaking bonds.
- If the two substituents are on different carbons, their relative orientation (same side / opposite sides) is fixed.
Condition:
- The ring must have at least two substituents (could be same or different) on different carbons.
- If both substituents are on the same carbon, swapping them doesn’t change the molecule (no isomerism).
Example:
- 1,2-dimethylcyclopropane: Two methyl groups on adjacent carbons → cis and trans isomers exist.
- 1,1-dimethylcyclopropane: Both methyls on same carbon → no geometrical isomerism.
4. The E-Z Notation (Why It’s Needed)
When the four substituents on a C=C are all different, cis-trans naming fails. The Cahn-Ingold-Prelog priority rules assign E (opposite sides) or Z (same side).
Why this works:
- Priority is based on atomic number (higher = higher priority).
- Compare the two groups on each carbon — if the higher priority groups are on the same side → Z (German zusammen = together); if opposite → E (entgegen = opposite).
Key insight: The condition remains the same — each carbon must have two different groups — but the naming becomes unambiguous.
5. Summary of Conditions (Exam-Ready)
| Structure | Condition | Why? |
|---|---|---|
| C=C double bond | Each carbon must have two different substituents | Otherwise, swapping groups gives same molecule |
| Ring (e.g., cycloalkane) | At least two substituents on different carbons | Ring prevents rotation; same-side/opposite-side are distinct |
| General | Restricted rotation (double bond or ring) | Without it, free rotation makes isomers identical |
6. Common Exam Pitfall
Don’t confuse:
- Geometrical isomerism ≠ optical isomerism (chirality).
- A molecule can have geometrical isomers even if it has no chiral centre.
- For rings: cis and trans are geometrical isomers only if the substituents are on different carbons.
Final takeaway: The conditions exist because restricted rotation creates a fixed spatial arrangement, and different substituents ensure that swapping positions actually changes the molecule. Without either, you get the same compound — not an isomer.
The key idea is that each term describes a specific structural feature of a coordination compound. Here is the breakdown with two examples for each.
Coordination entity – the central metal ion bonded to a fixed set of ligands, written inside square brackets.
- [Co(NH3)6]3+
- [Fe(CN)6]4−
Ligand – an ion or molecule that donates a lone pair to the metal.
- NH3 (ammine)
- Cl− (chlorido)
Coordination number – the number of ligand donor atoms directly bonded to the metal.
- In [Ni(CO)4], coordination number = 4.
- In [Fe(CN)6]3−, coordination number = 6.
Coordination polyhedron – the spatial arrangement of the donor atoms around the metal.
- Tetrahedral: [Ni(CO)4]
- Octahedral: [Co(NH3)6]3+
Homoleptic complex – all ligands are identical.
- [Cu(NH3)4]2+
- [Fe(CN)6]4−
Heteroleptic complex – at least two different types of ligands.
- [Co(NH3)5Cl]2+
- [Pt(NH3)2Cl2]
The six terms are defined with two examples each as shown above.
This question asks for definitions and two examples each of six fundamental coordination chemistry terms. The key is to understand each term's precise meaning in the context of a coordination compound, then pick clear, distinct examples that illustrate the concept without overlap.
The Concept: Building Blocks of Coordination Compounds
Coordination chemistry is the study of compounds formed between a central metal atom/ion and surrounding molecules or ions called ligands. Think of it like a solar system: the metal is the sun, and the ligands are planets held in orbit by coordinate bonds. Each term below describes a different aspect of this structure.
Let's work through each term systematically, with two well-chosen examples for each.
1. Coordination Entity
A coordination entity is the electrically charged or neutral species that contains the central metal atom/ion bonded to a fixed number of ligands. It's the "core" of the coordination compound, often written inside square brackets in formulas.
Example 1: [Co(NH3)6]3+ — This is a cationic coordination entity where cobalt(III) is surrounded by six ammonia ligands.
Example 2: [Fe(CN)6]4− — This is an anionic coordination entity where iron(II) is bonded to six cyanide ligands.
The coordination entity can be positive, negative, or neutral. For example, [Ni(CO)4] is a neutral coordination entity.
2. Ligand
A ligand is an ion or molecule that donates a pair of electrons to the central metal atom/ion to form a coordinate bond. Ligands are Lewis bases — they have at least one lone pair of electrons available for donation.
Example 1: NH3 (ammonia) — A monodentate ligand that donates through the nitrogen lone pair. It forms complexes like [Cu(NH3)4]2+.
Example 2: EDTA4− (ethylenediaminetetraacetate ion) — A hexadentate ligand that can donate through six donor atoms (two N and four O atoms). It forms very stable complexes, like [Co(EDTA)]−.
| Ligand Type | Denticity | Example |
|---|---|---|
| Monodentate | 1 | Cl−, H2O, NH3 |
| Bidentate | 2 | en (ethylenediamine), ox2− (oxalate) |
| Polydentate | >2 | EDTA4− (hexadentate) |
3. Coordination Number
The coordination number of a central metal atom/ion is the total number of ligand donor atoms directly bonded to it. It is NOT the number of ligands — a bidentate ligand counts as 2 toward the coordination number.
Example 1: In [Ag(NH3)2]+, the coordination number of Ag⁺ is 2 (two monodentate NH₃ ligands, each donating one atom).
Example 2: In [Co(en)3]3+, the coordination number of Co³⁺ is 6 (three bidentate en ligands, each donating two N atoms, so 3×2=6).
A common mistake: counting the number of ligands instead of donor atoms. For [Co(en)3]3+, there are 3 ligands but the coordination number is 6. Always count donor atoms, not ligand molecules.
4. Coordination Polyhedron
The coordination polyhedron is the geometric arrangement of the ligand donor atoms around the central metal atom/ion. It describes the spatial shape formed by joining the positions of the donor atoms.
Example 1: Octahedral — In [Co(NH3)6]3+, the six NH₃ ligands occupy the six vertices of a regular octahedron around Co³⁺. Bond angles are 90°.
Example 2: Tetrahedral — In [Ni(CO)4], the four CO ligands occupy the four vertices of a tetrahedron around Ni(0). Bond angles are approximately 109.5°.
Common coordination polyhedra and their coordination numbers:
- Linear: CN = 2
- Square planar: CN = 4
- Tetrahedral: CN = 4
- Octahedral: CN = 6
5. Homoleptic Complex
A homoleptic complex is one in which the central metal atom/ion is bonded to only one type of ligand. All ligands are identical.
Example 1: [Cu(NH3)4]2+ — Only ammonia ligands are present. The complex is homoleptic.
Example 2: [Fe(CO)5] — Only carbonyl (CO) ligands are present. This is a homoleptic carbonyl complex.
The word "homoleptic" comes from Greek: homo (same) + leptos (taken). So it literally means "taken from the same" — all ligands are the same.
6. Heteroleptic Complex
A heteroleptic complex is one in which the central metal atom/ion is bonded to two or more different types of ligands.
Example 1: [Co(NH3)5Cl]2+ — Contains both ammonia and chloride ligands. Two different ligand types make it heteroleptic.
Example 2: [Pt(NH3)2Cl2] — Contains both ammonia and chloride ligands. Even though there are two of each, the presence of two different ligand types makes it heteroleptic.
Don't confuse "heteroleptic" with "mixed valence" or "polynuclear." Heteroleptic simply means multiple ligand types, regardless of how many metal centers are present.
The two examples for each term are: Coordination entity — [Co(NH3)6]3+ and [Fe(CN)6]4−; Ligand — NH3 and EDTA4−; Coordination number — 2 in [Ag(NH3)2]+ and 6 in [Co(en)3]3+; Coordination polyhedron — octahedral in [Co(NH3)6]3+ and tetrahedral in [Ni(CO)4]; Homoleptic — [Cu(NH3)4]2+ and [Fe(CO)5]; Heteroleptic — [Co(NH3)5Cl]2+ and [Pt(NH3)2Cl2].
Defining Coordination-Chemistry Terms — Method: Definition-Then-Example
Method Name
Precise Definition, Then Two Distinct Examples
Steps
- State the precise definition of the term first, in terms of the central metal atom/ion and its bonded ligands — never start with an example, since a vague definition is where most marks are lost.
- Identify the structural feature the term describes — is it about the whole species (coordination entity), a single donor group (ligand), a count (coordination number), a shape (coordination polyhedron), or the variety of ligands present (homoleptic/heteroleptic)?
- Recall one clear, standard NCERT-level example that unambiguously demonstrates the term.
- Recall a second, genuinely different example (different metal and/or different ligand set) so the answer shows real understanding, not just memorised repetition.
- Cross-check consistency: make sure the same complex is not reused for two different terms unless that reuse is the point (e.g. using [Co(NH3)6]3+ again to illustrate "octahedral" after already using it for "coordination entity" is fine and expected).
Examples for Key Coordination Chemistry Terms
1. Coordination Entity
A coordination entity is an ion or molecule containing a central metal atom bonded to surrounding ligands.
| Example | Formula | Explanation |
|---|---|---|
| Hexaaquacopper(II) ion | [Cu(H2O)6]2+ | Central Cu²⁺ with six water ligands |
| Tetrachloronickelate(II) ion | [NiCl4]2− | Central Ni²⁺ with four chloride ligands |
2. Ligand
A ligand is an ion or molecule that donates a lone pair to the central metal atom.
| Example | Formula | Donor atom(s) |
|---|---|---|
| Water | H2O | Oxygen (O) |
| Ammonia | NH3 | Nitrogen (N) |
3. Coordination Number
The coordination number is the number of ligand donor atoms directly bonded to the central metal.
| Example | Complex | Coordination Number |
|---|---|---|
| Tetrahedral | [Ni(CO)4] | 4 |
| Octahedral | [Co(NH3)6]3+ | 6 |
4. Coordination Polyhedron
The coordination polyhedron is the geometric shape formed by the donor atoms around the central metal.
| Example | Complex | Polyhedron |
|---|---|---|
| Tetrahedral | [Ni(CO)4] | Tetrahedron |
| Octahedral | [Co(NH3)6]3+ | Octahedron |
5. Homoleptic vs Heteroleptic
| Type | Definition | Example |
|---|---|---|
| Homoleptic | All ligands are identical | [Co(NH3)6]3+ (only ammonia) |
| Heteroleptic | Two or more different types of ligands | [Co(NH3)4Cl2]+ (ammonia + chloride) |
Key exam tip: Give the definition in your own precise words before the
examples — an answer that opens straight with "for example..." without ever
stating the definition loses easy marks even if the examples are correct.
Common Mistakes When Defining Coordination-Chemistry Terms
Students lose marks on this question not because the chemistry is hard, but
because the six terms get mixed up with each other. Here are the most
frequent slips and how to avoid them.
Mistake 1: Confusing "Ligand" with "Coordination Entity"
The error: Treating the whole formula (including counter ions) as the
"coordination entity," or calling a single ligand the "coordination entity."
How to avoid:
- The coordination entity is only what sits inside the square brackets — the central metal atom/ion plus the ligands directly bonded to it (e.g. [Co(NH3)6]3+).
- A ligand is just one of the individual donor species bonded to the metal (e.g. NH3 is one ligand within that coordination entity).
- Any ion sitting outside the brackets (like Cl− in [Co(NH3)6]Cl3) is neither the coordination entity nor a ligand — it is a counter ion.
Mistake 2: Counting Ligands Instead of Donor Atoms for Coordination Number
The error: Assuming coordination number always equals the number of
ligand molecules/ions present.
How to avoid:
- Coordination number = number of ligand donor atoms bonded to the metal, not the number of ligand species.
- A monodentate ligand contributes 1 to the coordination number; a bidentate ligand (like en) contributes 2.
- Example: [Co(en)3]3+ has only 3 ligand molecules but a coordination number of 6 (3 × 2 donor atoms).
Mistake 3: Assuming Coordination Number Fixes the Coordination Polyhedron
The error: Thinking coordination number 4 always means tetrahedral, or
that coordination number 6 always means octahedral.
How to avoid:
- Coordination number 4 can be tetrahedral (e.g. [Ni(CO)4]) or square planar (e.g. [PtCl4]2−) — the coordination number alone does not decide the shape.
- Coordination polyhedron is the actual geometric arrangement of donor atoms; it must be stated/derived separately from the coordination number.
Mistake 4: Miscounting Ligand Types for Homoleptic/Heteroleptic
The error: Calling a complex "heteroleptic" just because it has more
than one ligand, even if all the ligands are of the same type.
How to avoid:
- Homoleptic = bonded to only one kind of ligand, no matter how many copies (e.g. [Fe(CO)5] — five CO ligands, still homoleptic).
- Heteroleptic = bonded to two or more different kinds of ligands (e.g. [Co(NH3)5Cl]2+ — ammine and chlorido are different ligand types).
- Count types of ligand, not the total number of ligand molecules.
Mistake 5: Giving Vague or Duplicate Examples
The error: Reusing the same complex for two different terms, or giving
an example that is not actually a valid, well-known coordination compound.
How to avoid:
- Pick two distinct, standard NCERT-level examples for each term so the answer clearly demonstrates understanding rather than repetition — e.g. [Co(NH3)6]3+ and [Fe(CN)6]4− for coordination entity; [Ni(CO)4] (tetrahedral) and [Co(NH3)6]3+ (octahedral) for coordination polyhedron.
Quick Revision Table
| Term | Common Mistake | Correct Understanding |
|---|---|---|
| Coordination entity | Confused with the whole formula | Only the species inside [ ] |
| Ligand | Confused with the coordination entity | One donor species bonded to the metal |
| Coordination number | Counted ligands, not donor atoms | Sum of donor atoms from all ligands |
| Coordination polyhedron | Assumed fixed by coordination number alone | The actual 3-D shape (e.g. CN=4 can be tetrahedral or square planar) |
| Homoleptic/heteroleptic | Counted ligand molecules, not ligand types | Based on number of different types of ligand |
Final tip: Define each term precisely first, then attach two clean,
distinct examples — don't let the six terms blur into one another.
- COMEDK 2026Set 2026-A1 markMCQQ.Which one of the following complex-isomerism pair matches correctly? (A) [CrCl2(ox)2]3− - Exhibits cis- trans isomerism and cis isomer is optically active (B) [PtCl2(NH3)2] - Exhibits both cis- trans and optical isomerism (C) [Fe(CN)4(NH3)2]−- Exhibits cis- trans isomerism and both exhibit optical isomerism (D) [Cr(C2O4)3]3− - Exhibits cis- trans isomerism but is optically inactive
›Reveal solutionSolution
The key is to check each complex for possible geometric (cis/trans) and optical isomerism based on its coordination geometry and ligand arrangement. Only option (A) correctly pairs a complex that exhibits cis-trans isomerism with the cis isomer being optically active.
-
Understand the coordination geometries and isomerism rules
- For octahedral complexes with two identical bidentate ligands (like oxalate, ox²⁻) and two monodentate ligands, the two monodentate ligands can be adjacent (cis) or opposite (trans).
- Optical activity arises when the complex lacks a plane of symmetry — the cis isomer of such a complex is often chiral (non-superimposable mirror image), while the trans isomer is usually achiral.
-
Analyze option (A): [CrCl2(ox)2]3−
- Chromium(III) is octahedral. Two oxalate (ox²⁻) ligands are bidentate, occupying four coordination sites. The two chloride ligands occupy the remaining two sites.
- The two Cl⁻ can be cis (adjacent) or trans (opposite). So cis-trans isomerism exists.
- The cis isomer has no plane of symmetry (the two oxalate rings create a chiral arrangement), so it is optically active. The trans isomer has a plane of symmetry and is optically inactive.
- This matches the statement exactly.
-
Analyze option (B): [PtCl2(NH3)2]
- Platinum(II) is square planar. It exhibits cis-trans isomerism (cis and trans isomers are well-known).
- However, square planar complexes with two identical monodentate ligands and two identical other monodentate ligands are never optically active — they have a plane of symmetry in both isomers.
- So the claim “exhibits both cis-trans and optical isomerism” is false.
-
Analyze option (C): [Fe(CN)4(NH3)2]−
- Iron in this complex is likely low-spin Fe(II) or Fe(III), octahedral. Four CN⁻ and two NH₃ ligands.
- The two NH₃ can be cis or trans, so cis-trans isomerism is possible.
- However, the cis isomer of an octahedral complex with four identical monodentate ligands and two identical others does have a plane of symmetry (the plane containing the two NH₃ and two opposite CN⁻). Thus, neither cis nor trans is chiral.
- The statement “both exhibit optical isomerism” is false.
-
Analyze option (D): [Cr(C2O4)3]3−
- This is a tris(oxalato)chromate(III) complex. All three ligands are bidentate, so there is no cis-trans isomerism (all positions are equivalent in terms of ligand identity).
- However, this complex is a well-known example of a chiral octahedral complex — it exists as a pair of enantiomers (Δ and Λ) and is optically active.
- The statement says it exhibits cis-trans isomerism (false) and is optically inactive (false). So it is completely wrong.
-
Conclusion: Only option (A) correctly describes the isomerism behavior.
Watch outA common mistake is to assume that any octahedral complex with two identical monodentate ligands can have an optically active cis isomer. That is only true when the other four positions are occupied by two identical bidentate ligands (or an asymmetric arrangement). With four identical monodentate ligands (as in option C), the cis isomer is achiral.
✓Final answerThe correct option is (A).
ANSWER: A
-
- COMEDK 2026Set 2026-M1 markMCQQ. Match the Coordination compounds in Column I with the type of stereoisomerism given in Column II exhibited by them. .tg {border-collapse:collapse;border-spacing:0;} .tg td{border-color:black;border-style:solid;border-width:1px;font-family:Arial, sans-serif;font-size:14px; overflow:hidden;padding:10px 5px;word-break:normal;} .tg th{border-color:black;border-style:solid;border-width:1px;font-family:Arial, sans-serif;font-size:14px; font-weight:normal;overflow:hidden;padding:10px 5px;word-break:normal;} .tg .tg-baqh{text-align:center;vertical-align:top} Column I Column I A [Pt(NH3)2Cl2] P fac-mer B Ni[(NH3)2Cl2] Q cis -trans C [Co(NH3)3(NO2)3] R only cis isomer shows optical isomerism D [PtCl2(en)2]2+ S does not exhibit isomerism. (A) A−SB−RC−QD−P (B) A−SB−PC−QD−R (C) A−QB−SC−OD−R (D) A−RB−PC−SD−Q
›Reveal solutionSolution
The key is to identify the geometry and ligand arrangement of each complex, then match it to the stereoisomerism type: square planar [Pt(NH₃)₂Cl₂] shows cis‑trans; tetrahedral Ni[(NH₃)₂Cl₂] is achiral and shows no isomerism; octahedral [Co(NH₃)₃(NO₂)₃] gives fac‑mer; and octahedral [PtCl₂(en)₂]²⁺ has only the cis isomer optically active. The correct match is A‑Q, B‑S, C‑P, D‑R, which corresponds to option (C).
Concept & Intuition
Stereoisomerism in coordination compounds depends on the coordination number, geometry, and the symmetry of the ligand arrangement.
- Square planar complexes (d⁸ metals like Pt²⁺) with two identical bidentate or two pairs of monodentate ligands can show cis‑trans isomerism.
- Tetrahedral complexes (like Ni²⁺ with four monodentate ligands) are almost always achiral and show no stereoisomerism because all vertices are equivalent.
- Octahedral complexes with three identical and three different monodentate ligands (MA₃B₃ type) exhibit fac‑mer isomerism.
- Octahedral complexes with a bidentate ligand (like en) and two identical monodentate ligands can show cis‑trans isomerism, and only the cis form is chiral (optical isomerism).
Step‑by‑Step Reasoning
-
Complex A: [Pt(NH₃)₂Cl₂]
- Pt²⁺ is d⁸, so the geometry is square planar.
- Two NH₃ and two Cl⁻ ligands can be arranged adjacent (cis) or opposite (trans).
- This is classic cis‑trans isomerism.
- Match: A → Q.
-
Complex B: Ni[(NH₃)₂Cl₂]
- Ni²⁺ in this formulation (no charge shown, but neutral) is typically tetrahedral (common for Ni²⁺ with four monodentate ligands).
- In a tetrahedron, all four positions are equivalent; swapping two identical ligands gives the same compound.
- No cis/trans, no fac/mer, no optical activity.
- Match: B → S (does not exhibit isomerism).
-
Complex C: [Co(NH₃)₃(NO₂)₃]
- Co³⁺ is d⁶, almost always octahedral.
- Three NH₃ and three NO₂⁻ ligands: this is an MA₃B₃ type.
- The three identical ligands can occupy a face of the octahedron (fac) or a meridian (mer).
- Match: C → P (fac‑mer).
-
Complex D: [PtCl₂(en)₂]²⁺
- Pt⁴⁺ is d⁶, octahedral.
- “en” is ethylenediamine, a bidentate ligand. Two en ligands can be arranged cis (both en in adjacent positions) or trans (en ligands opposite).
- The cis isomer lacks a plane of symmetry and is chiral (optical isomerism). The trans isomer is achiral.
- The description “only cis isomer shows optical isomerism” fits exactly.
- Match: D → R.
Matching the options
From above:
A → Q, B → S, C → P, D → R.
This corresponds to option (C).
Watch outA common mistake is to assume Ni[(NH₃)₂Cl₂] is square planar (like Pt) — but Ni²⁺ with four monodentate ligands is almost always tetrahedral, and tetrahedral complexes of this type show no stereoisomerism.
TipFor octahedral MA₃B₃, remember “fac” = three identical ligands on one face (like a tripod), “mer” = three in a line through the centre. Drawing a quick octahedron helps.
✓Final answerThe correct option is (C).
ANSWER: C
- COMEDK 2025Set 2025-A1 markMCQQ.Choose the coordination compound which does not exhibit Optical activity. (A) cis −[PtCl2(en)2]2+ (B) [Co(en)3]3+ (C) trans −[CoCl2(en)2]+ (D) cis −[CoCl2(en)2]+
›Reveal solutionSolution
Optical activity requires a molecule to be chiral (non‑superimposable on its mirror image). Among the given complexes, only the trans isomer of [CoCl2(en)2]+ has a plane of symmetry, making it achiral and thus optically inactive. The correct option is (C).
Concept & Intuition
Optical activity arises when a molecule lacks an improper rotation axis (i.e., it is chiral). For coordination compounds, chirality often comes from chelate rings that create a helical or propeller‑like arrangement with no plane or center of symmetry. The key is to check whether the complex has a mirror plane or a center of inversion — if it does, it cannot be optically active. Here, all complexes contain the bidentate ligand ethylenediamine (en), which forms five‑membered chelate rings. The cis/trans geometry and the number of chelate rings determine symmetry.
Step‑by‑step reasoning
-
Analyze (A): cis‑[PtCl2(en)2]2+
- Pt(IV) is octahedral. Two en ligands and two Cl⁻ ions. In the cis isomer, the two Cl⁻ are adjacent.
- The two en chelate rings create a chiral arrangement: the complex has no plane of symmetry (the chelate rings are not coplanar) and no center of inversion.
- It exists as a pair of non‑superimposable mirror images (Δ and Λ isomers).
- Conclusion: This complex is optically active.
-
Analyze (B): [Co(en)3]3+
- Co(III) is octahedral with three bidentate en ligands. This is a classic example of a chiral complex.
- The three chelate rings form a propeller shape (like a three‑bladed fan). There is no plane or center of symmetry.
- It is well‑known to exist as Δ and Λ enantiomers.
- Conclusion: This complex is optically active.
-
Analyze (C): trans‑[CoCl2(en)2]+
- Co(III) octahedral with two en ligands and two Cl⁻ ions. In the trans isomer, the two Cl⁻ are opposite each other (180° apart).
- The two en ligands lie in a plane; the Cl⁻ atoms are on the axis perpendicular to that plane.
- The molecule has a plane of symmetry that bisects the en ligands and contains the Co–Cl bonds.
- Because of this mirror plane, the complex is superimposable on its mirror image — it is achiral.
- Conclusion: This complex does not exhibit optical activity.
-
Analyze (D): cis‑[CoCl2(en)2]+
- Same formula as (C) but with Cl⁻ adjacent.
- The two en chelate rings are now bent out of plane, and there is no symmetry plane.
- The cis isomer is chiral (it exists as Δ and Λ forms).
- Conclusion: This complex is optically active.
Watch outA common mistake is to think that any complex with chelate rings is automatically chiral. The trans isomer of [CoCl2(en)2]+ shows that symmetry can still exist if the chelate rings are coplanar and the other ligands are opposite each other.
TipFor octahedral complexes of type [M(AA)2X2] (AA = bidentate ligand), the cis isomer is chiral, but the trans isomer is achiral because it has a plane of symmetry. This is a quick rule to remember.
✓Final answerThe correct option is (C).
ANSWER: C
-
- COMEDK 2025Set 2025-M1 markMCQQ.Which one of the following coordination compounds will exhibit both geometrical and optical isomerism? (A) [Cr(ox)3]3− (B) [Co(en)2Cl2]+ (C) [Co(CN)6]3− (D) [Co(NO3)3(NH3)3]
›Reveal solutionSolution
The key is to identify a complex that can exist as non-superimposable mirror images (optical isomerism) while also having non-identical spatial arrangements of ligands (geometrical isomerism). Only (B) [Co(en)2Cl2]+ satisfies both: it has cis/trans geometrical isomers, and the cis form is chiral.
Concept & Intuition
Geometrical isomerism arises when ligands can occupy different positions around the metal (e.g., cis vs. trans in an octahedral complex). Optical isomerism requires the complex to lack a plane of symmetry, so its mirror image is non-superimposable — like left and right hands. For a complex to show both, it must have at least two different arrangements of ligands (geometrical isomers), and at least one of those arrangements must be chiral. We check each option for these conditions.
Step-by-step reasoning
-
Option (A): [Cr(ox)3]3−
- ox = oxalate (C2O42−), a bidentate ligand.
- The complex is octahedral with three identical bidentate ligands.
- All three oxalate ligands are equivalent; there is no possibility of different ligand arrangements (no cis/trans).
- However, the complex is chiral (like the [M(AA)3] type) and shows optical isomerism.
- Conclusion: Geometrical isomerism is absent, so this fails.
-
Option (B): [Co(en)2Cl2]+
- en = ethylenediamine (bidentate), Cl = monodentate.
- The two Cl ligands can be adjacent (cis) or opposite (trans) — this gives geometrical isomerism.
- The trans isomer has a plane of symmetry (the Co–Cl–Co axis and the en ligands lie in a plane), so it is achiral.
- The cis isomer has no plane of symmetry: the two en rings create a helical twist, and the mirror image cannot be rotated to match the original. Hence the cis form is chiral and shows optical isomerism.
- Conclusion: Both geometrical and optical isomerism exist (cis isomer is optically active). This works.
-
Option (C): [Co(CN)6]3−
- All six ligands are identical monodentate CN⁻.
- Only one possible arrangement (no geometrical isomers).
- The complex has many planes of symmetry (e.g., through opposite CN groups), so it is achiral.
- Conclusion: Neither type of isomerism occurs.
-
Option (D): [Co(NO3)3(NH3)3]
- Here NO3− is monodentate (bonded through oxygen).
- Three identical nitrato and three identical ammine ligands.
- Geometrical isomerism is possible: facial (fac) where three identical ligands occupy one face of the octahedron, and meridional (mer) where they lie in a plane.
- However, both fac and mer isomers have planes of symmetry. The fac isomer has a C3 axis and three vertical planes; the mer isomer has a plane through the metal and the three nitrato ligands. Neither is chiral.
- Conclusion: Geometrical isomerism exists, but optical isomerism does not.
Watch outA common mistake is to think that any complex with bidentate ligands is automatically chiral. For example, [Cr(ox)3]3− is chiral but has no geometrical isomers. The question requires both types, so geometrical isomerism must also be possible.
TipFor octahedral MA2B2C2 or MA2B4 type complexes, the cis isomer is often chiral if the two identical bidentate ligands (like en) create a twist. The trans isomer is usually achiral.
✓Final answerThe correct option is (B).
ANSWER: B
-
- COMEDK 2024Set 2024-E1 markMCQQ.Which of the following 2 compounds exhibit both Geometrical and Structural isomerism? A=[Co(NH3)4Cl2]NO2 B=[Co(NH3)Br]SO4C=[Co(NH3)3(NO2)3]D=[Cr(H2O)6]Cl3 (A) A & C (B) C & B (C) B & D (D) A & B
›Reveal solutionSolution
The key is to identify which complexes can show both geometrical (cis/trans) isomerism and structural (ionization) isomerism. Only A and C satisfy both conditions, so the correct option is (A).
Concept & Intuition
Geometrical isomerism arises when ligands can occupy different spatial positions around a metal center (e.g., cis/trans in octahedral complexes with two identical ligands). Structural isomerism here refers to ionization isomerism — where the counter ion and a ligand exchange places, giving different ions in solution. We must check each complex for both possibilities.
Step-by-step reasoning
-
Complex A: [Co(NH3)4Cl2]NO2
- The coordination sphere is [Co(NH3)4Cl2]+ with NO2− as counter ion.
- Geometrical isomerism: With four NH3 and two Cl ligands in an octahedral geometry, the two chlorines can be cis (adjacent) or trans (opposite). So yes, geometrical isomers exist.
- Structural (ionization) isomerism: The NO2− could swap with a Cl− to give [Co(NH3)4(NO2)Cl]Cl — a different compound with different ions. So ionization isomerism is possible.
- Conclusion: A exhibits both.
-
Complex B: [Co(NH3)Br]SO4
- The formula suggests a coordination sphere with one NH3 and one Br− (likely [Co(NH3)Br]+), but cobalt(III) typically has coordination number 6. This formula is unrealistic — it likely means [Co(NH3)5Br]SO4 (a common typo in such problems).
- Assuming the intended formula is [Co(NH3)5Br]SO4:
- Geometrical isomerism: With five identical NH3 and one Br, no cis/trans isomerism is possible (only one arrangement).
- Structural isomerism: SO42− could replace Br− to give [Co(NH3)5SO4]Br — ionization isomerism is possible.
- So B shows only structural isomerism, not geometrical.
-
Complex C: [Co(NH3)3(NO2)3]
- This is a neutral complex (no counter ion).
- Geometrical isomerism: With three NH3 and three NO2 ligands, two geometrical isomers exist: fac (all three identical ligands on one face) and mer (three in a meridian). So yes.
- Structural isomerism: Since there is no counter ion, ionization isomerism is impossible. However, linkage isomerism is possible here because NO2− can bind through N (nitro) or O (nitrito). But the question specifies "Structural isomerism" — in coordination chemistry, structural isomerism includes ionization, hydrate, and linkage isomerism. Linkage isomerism is a type of structural isomerism. So C can show structural isomerism via nitro–nitrito switching.
- Conclusion: C exhibits both geometrical (fac/mer) and structural (linkage) isomerism.
-
Complex D: [Cr(H2O)6]Cl3
- All six ligands are identical water molecules.
- Geometrical isomerism: Impossible — no distinguishable ligand positions.
- Structural isomerism: Hydrate isomerism is possible (e.g., [Cr(H2O)5Cl]Cl2⋅H2O), so it shows structural isomerism.
- Conclusion: D shows only structural isomerism.
Final check:
- A: both geometrical and structural ✓
- B: only structural
- C: both geometrical and structural ✓
- D: only structural
Thus, A and C are the correct pair.
Watch outA common mistake is to forget that linkage isomerism (nitro vs. nitrito) counts as structural isomerism. Also, note that B’s formula is ambiguous — always check coordination numbers.
TipFor octahedral complexes, geometrical isomerism requires at least two different ligand types, with at least two of one kind. Structural isomerism often involves swapping a ligand with a counter ion or changing the binding atom.
✓Final answerThe correct option is (A).
ANSWER: A
-
- COMEDK 2024Set 2024-M1 markMCQQ.Choose the incorrect statement from the following. (A) A tetrahedral complex of the type [Ma2b2] does not show geometrical isomerism (B) Coordination entities of the type [Ma3b3] do not exhibit geometrical isomerism (C) Square planar complex of the type [Mabcd] has 3 possible geometrical isomers (D) In a coordination entity of the type [Ma2(bb)2]2+ only the cis-isomer is optically active
›Reveal solutionSolution
The key is to recall the conditions for geometrical and optical isomerism in coordination complexes. The incorrect statement is (B), because octahedral [Ma3b3] complexes do exhibit geometrical isomerism (fac and mer forms).
The question tests your understanding of isomerism in coordination compounds — specifically, when geometrical (cis/trans, fac/mer) and optical isomers are possible. Let’s examine each statement carefully.
-
Statement (A): A tetrahedral complex of the type [Ma2b2] does not show geometrical isomerism.
Tetrahedral complexes have all four ligands at the vertices of a tetrahedron. In [Ma2b2], any two identical ligands are always adjacent (there is no “opposite” position as in a square). Rotating the molecule gives the same arrangement — all possible placements are equivalent. So no geometrical isomers exist. This statement is correct.
-
Statement (B): Coordination entities of the type [Ma3b3] do not exhibit geometrical isomerism.
For an octahedral complex with three identical ligands (a) and three others (b), two distinct arrangements are possible:
- fac (facial): the three a ligands occupy one face of the octahedron (all mutually adjacent).
- mer (meridional): the three a ligands lie in a plane that goes through the metal, with two opposite and one in between. These are geometrical isomers. So this statement is false — it claims they do not exhibit geometrical isomerism, but they do.
-
Statement (C): Square planar complex of the type [Mabcd] has 3 possible geometrical isomers.
In a square planar complex with four different ligands, the number of distinct arrangements (ignoring mirror images) is given by (4−1)!/2=3 (since rotations and reflections are considered the same). These correspond to placing each ligand in turn at a fixed reference position and arranging the other three. So 3 isomers is correct.
-
Statement (D): In a coordination entity of the type [Ma2(bb)2]2+ only the cis-isomer is optically active.
Here (bb) denotes a bidentate ligand. In an octahedral complex with two identical monodentate ligands (a) and two identical bidentate ligands (bb), the cis arrangement (both a ligands adjacent) is chiral — it has no plane of symmetry — and thus is optically active. The trans arrangement (a ligands opposite) has a plane of symmetry and is optically inactive. So this statement is correct.
Watch outA common mistake is to think that [Ma3b3] has no isomers because “all a’s are the same.” But the relative positions (facial vs. meridional) create distinct spatial arrangements — these are geometrical isomers, not just different orientations.
TipFor octahedral [Ma3b3], remember: fac = three of one kind on a triangular face; mer = three in a straight line through the metal. They are not superimposable by rotation.
✓Final answerThe correct option is (B).
ANSWER: B
-
- COMEDK 2023Set 2023-E1 markMCQQ.Which one of the following is an incorrect statement pertaining to the properties of Coordination compounds? (A) A square planar complex of the type Mabcd, where a, b, c and d are unidentate ligands, exhibits geometrical isomerism and exists in one cis-form and two trans-forms. (B) [Co(NH3)5NO2] Cl2 exists in 2 forms, the red form and the yellow form which are linkage isomers. (C) [Fe(CN)6]3− is called a Low spin complex. (D) Out of cis- [CrCl2(ox)2]3− and trans- [CrCl2(ox)2]3−, the trans isomer is optically inactive.
›Reveal solutionSolution
The incorrect statement is (A): a square-planar Mabcd complex gives three geometrical isomers (each defined by which ligand is trans to a chosen one), not "one cis-form and two trans-forms." The other three statements are all correct.
Option (A) — incorrect. For square-planar [Mabcd] there are three geometrical isomers, obtained by placing each of b, c, d trans to a. Describing them as "one cis-form and two trans-forms" mis-states the isomerism, so this statement is wrong.
Option (B) — correct. [Co(NH3)5NO2]Cl2 exists as the yellow nitro (−NO2, N-bonded) and red nitrito (−ONO, O-bonded) linkage isomers.
Option (C) — correct. CN− is a strong-field ligand; with Fe3+ (d5) it forces electron pairing, giving a low-spin complex.
Option (D) — correct. trans-[CrCl2(ox)2]3− possesses a plane/centre of symmetry and is optically inactive, whereas the cis form is chiral.
Since the question asks for the incorrect statement, the answer is (A).
✓Final answerThe correct option is (A) — A square planar complex of the type Mabcd, where a, b, c and d are unidentate ligands, exhibits geometrical isomerism and exists in one cis-form and two trans-forms.
- COMEDK 2023Set 2023-E1 markMCQQ.Which one of the following Coordination entities exhibits Facial and Meridional isomerism? (A) [Co(H2O)3(NO2)3] (B) [Co( en )2Cl2]+ (C) [Co(NH3)4Br2]NO3 (D) [Co( en )3]Cl3
›Reveal solutionSolution
fac–mer isomerism requires an octahedral Ma3b3 complex. Only [Co(H2O)3(NO2)3] has three of each monodentate ligand, so it shows facial and meridional isomers.
fac–mer isomerism occurs in octahedral complexes of type Ma3b3: the three like ligands can occupy one triangular face (facial) or a meridian (meridional).
- (A) [Co(H2O)3(NO2)3] — Ma3b3 type ⇒ shows fac and mer isomers. ✓
- (B) [Co(en)2Cl2]+ — M(AA)2b2 ⇒ cis/trans (and optical), not fac/mer.
- (C) [Co(NH3)4Br2]NO3 — Ma4b2 ⇒ cis/trans only.
- (D) [Co(en)3]Cl3 — M(AA)3 ⇒ only optical isomerism.
✓Final answerThe correct option is (A) — [Co(H2O)3(NO2)3]
- COMEDK 2023Set 2023-M1 markMCQQ.The complex [PtCl2(en)2]2+ ion shows (A) structural isomerism (B) geometrical isomerism only (C) optical isomerism only (D) geometrical and optical isomerism
›Reveal solutionSolution
The octahedral [PtCl2(en)2]2+ ion can be cis or trans (geometrical isomerism), and the cis isomer lacks a plane of symmetry so it is optically active — hence it displays both geometrical and optical isomerism.
The complex has Pt bonded to two Cl− ligands and two bidentate ethylenediamine (en) ligands, giving a coordination number of 6 (octahedral).
- Geometrical isomerism: the two Cl− can be adjacent (cis) or opposite (trans).
- Optical isomerism: the cis-[PtCl2(en)2]2+ isomer is non-superimposable on its mirror image (no plane/centre of symmetry), so it exists as a pair of enantiomers. (The trans form is achiral.)
Therefore the complex exhibits both geometrical and optical isomerism.
✓Final answerThe correct option is (D) — geometrical and optical isomerism.
- COMEDK 2023Set 2023-M1 markMCQQ.Which of the following complex show optical isomerism?(i) cis−[COCl(en)2(NH3)]2+(ii) cis−[CrCl2(ox)2]3−(iii) cis−[CO(en)2Cl2]Cl(iv) cis−[CO(NH3)4Cl2]+ (A) (i), (ii),(iii) (B) (i),(ii) (C) (i),(iv) (D) (i), (ii), (iv)
›Reveal solutionSolution
Octahedral complexes with two (or more) cis bidentate chelate rings are chiral. Species (i), (ii) and (iii) meet this, while (iv), having only monodentate ligands, has a mirror plane and is achiral.
A complex shows optical isomerism only if it lacks any improper symmetry element (plane / centre of symmetry) — typically cis-[M(AA)2X2] or cis-[M(AA)2XY] types with bidentate chelates.
- cis-[CoCl(en)2(NH3)]2+: two en chelates in a cis, unsymmetrical arrangement ⇒ chiral. ✓
- cis-[CrCl2(ox)2]3−: two oxalate chelates cis to each other ⇒ chiral (classic cis-[M(AA)2X2]). ✓
- cis-[Co(en)2Cl2]+: the textbook example — the cis form has no plane of symmetry and exists as d/l enantiomers ⇒ chiral. ✓ (Only the trans form is achiral.)
- cis-[Co(NH3)4Cl2]+: only monodentate ligands; the molecule possesses a plane of symmetry ⇒ not optically active. ✗
Hence (i), (ii) and (iii) show optical isomerism.
✓Final answer
The correct option is (A) — (i),
(ii),
(iii)
- COMEDK 2022Set 20221 markMCQQ.The complex which does not show optical isomerism is (A) cis −[Co(en)2Cl2]Cl (B) cis −[CrCl2(ox)2]3− (C) cis −[CoCl(en)2(NH3)]2+ (D) cis −[Co(NH3)4Cl2]+
›Reveal solutionSolution
(A) cis-[Co(en)2Cl2]+ : cis-bis(chelate) - non-superimposable on its mirror image -> OPTICALLY ACTIVE. (B) cis-[CrCl2(ox)2]^3- : cis-bis(chelate) -> OPTICALLY ACTIVE. (C) cis-[CoCl(en)2(NH3)]^2+ : again cis-bis(en) -> OPTICALLY ACTIVE. (D) cis-[Co(NH3)4Cl2]+ : only monodentate ligands. The cis isomer possesses a plane of symmetry (the plane containing the two Cl and two of the NH3), so it is superimposable on its mirror image -> NOT optically active.
Concept: Optical isomerism in octahedral complexes requires the absence of a plane (or centre) of symmetry. Bidentate chelate rings (en, ox) in the cis arrangement destroy the mirror plane; complexes with only monodentate ligands of type [M(A)4B2] retain a plane.
(A) cis-[Co(en)2Cl2]+ : cis-bis(chelate) - non-superimposable on its mirror image -> OPTICALLY ACTIVE.
(B) cis-[CrCl2(ox)2]^3- : cis-bis(chelate) -> OPTICALLY ACTIVE.
(C) cis-[CoCl(en)2(NH3)]^2+ : again cis-bis(en) -> OPTICALLY ACTIVE.
(D) cis-[Co(NH3)4Cl2]+ : only monodentate ligands. The cis isomer possesses a plane of symmetry (the plane containing the two Cl and two of the NH3), so it is superimposable on its mirror image -> NOT optically active.
✓Final answerThe correct option is (D) — cis −[Co(NH3)4Cl2]+
ANSWER: D
- KCET 2021Set B-21 markMCQQ.In Chrysoberyl, a compound containing Beryllium, Aluminium and oxygen, oxide ions form cubic close packed structure. Aluminium ions occupy 41th of tetrahedral voids and Beryllium ions occupy 41th of octahedral voids. The formula of the compound is (A) BeAlO4 (B) BeAl2O4 (C) Be2AlO2 (D) BeAlO2
›Reveal solutionSolution
Count the voids per ccp anion (2 tetrahedral, 1 octahedral), take the stated fractions, and reduce the resulting ratio to the simplest whole numbers.
Step 1 — The void-counting rule for close packing
In any close-packed arrangement (ccp/fcc or hcp) of N spheres:
- number of octahedral voids =N
- number of tetrahedral voids =2N
This is the single fact the whole problem rests on. (Each sphere contributes one octahedral void and two tetrahedral voids to the lattice.)
Step 2 — Set up with N oxide ions
Let the ccp lattice contain N ions of O2−.
Tetrahedral voids=2N,Octahedral voids=N
Step 3 — Fill the voids as stated
Aluminium occupies 41 of the tetrahedral voids:
nAl=41×2N=2N
Beryllium occupies 41 of the octahedral voids:
nBe=41×N=4N
Step 4 — Form the ratio
Be:Al:O=4N:2N:N
Multiply throughout by N4 to clear fractions:
=1:2:4
∴ Formula=BeAl2O4
Step 5 — Check electrical neutrality (an independent confirmation)
Charges: Be2+, Al3+, O2−.
Total positive=1(+2)+2(+3)=+8
Total negative=4(−2)=−8
Net charge =0. ✓ The formula is electrically neutral — a strong check that the void arithmetic is right.
By contrast, option (A) BeAlO4 gives +2+3−8=−3, (C) Be2AlO2 gives +4+3−4=+3, and (D) BeAlO2 gives +2+3−4=+1 — none of them is neutral, so all three are impossible on charge-balance grounds alone.
✓Final answerThe correct option is (B) — BeAl2O4.
ANSWER: B
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.