Q.How will you carry out the following conversions, both starting from aniline (C6H5NH2)?
(i) aniline is to be converted into 3,5-dibromonitrobenzene (a benzene ring with –NO2 at position 1 and –Br at positions 3 and 5);
(ii) aniline is to be converted into 3,5-dibromo-4-iodonitrobenzene (a benzene ring with –NO2 at position 1, –Br at positions 3 and 5, and –I at position 4).
Imagine you have a benzene ring, and you want to attach a new group — say a chlorine, a bromine, a cyano group, or even a hydroxyl — directly onto the ring. The benzene ring is stubborn; it doesn't easily let go of its hydrogen atoms for simple substitution. But there is a clever trick: first convert the ring into a diazonium salt, a highly reactive intermediate that will let you swap in almost any group you want.
That is the core idea. A diazonium salt is a temporary, energetic handle on the benzene ring that you can then replace with a wide variety of substituents. It is one of the most powerful tools in aromatic synthesis.
What is a Diazonium Salt?
A diazonium salt has the general formula Ar–N₂⁺ X⁻, where Ar is an aryl group (like phenyl, C₆H₅–), N₂⁺ is a diazonium cation (two nitrogen atoms triple-bonded, with a positive charge on the terminal nitrogen), and X⁻ is a counterion like chloride, bromide, or hydrogensulfate.
The key structural feature: the –N₂⁺ group is attached directly to the benzene ring. This group is unstable — it wants to leave as N₂ gas. That instability is exactly what makes it useful: when the N₂ leaves, the ring is left with a highly reactive carbocation-like intermediate that can be attacked by a nucleophile.
Watch out
Diazonium salts are thermally unstable and can explode if dried. They are almost always prepared and used in cold solution (0–5 °C) without isolation.
How Do You Make One? (Diazotization)
You start with a primary aromatic amine (Ar–NH₂). Treat it with nitrous acid (HNO₂) at low temperature (0–5 °C). The reaction is:
Ar–NH2+NaNO2+2HCl0−5∘CAr–N2+Cl−+NaCl+2H2O
The nitrous acid is generated in situ from sodium nitrite and a mineral acid. The amine gets converted into the diazonium salt almost instantly. You must keep the solution cold; if it warms up, the diazonium salt decomposes and you get phenol and nitrogen gas.
Two Major Classes of Reactions
Once you have the diazonium salt in solution, you can do two fundamentally different things with it:
1. Substitution Reactions (N₂ leaves)
Here the –N₂⁺ group is replaced by another group. The nitrogen gas bubbles away, and the ring gets a new substituent. This is called dediazoniation. The leaving group is N₂, which is extremely stable, so the reaction is thermodynamically driven.
The most common substitutions:
Reagent/Condition
Product
Name
CuCl / HCl, heat
Ar–Cl
Sandmeyer reaction
CuBr / HBr, heat
Ar–Br
Sandmeyer reaction
CuCN / KCN, heat
Ar–CN
Sandmeyer reaction
KI, heat
Ar–I
Direct substitution
H₂O, heat
Ar–OH
Hydrolysis
H₃PO₂ (hypophosphorous acid)
Ar–H
Reduction (replaces N₂ with H)
Cu₂O, Cu(NO₃)₂, H₂O
Ar–NO₂
Replacement with nitro group
Tip
The Sandmeyer reaction uses copper(I) halide or cyanide as a catalyst. The copper helps transfer the halide or cyanide to the ring. Without copper, the reaction is much slower or gives different products.
The mechanism for Sandmeyer: the diazonium salt accepts an electron from Cu⁺, forming an aryl radical, which then abstracts a halogen from CuX₂. The N₂ leaves as a gas.
2. Coupling Reactions (N₂ stays)
Here the diazonium salt keeps its N₂ group and attacks another aromatic ring (usually an activated one like phenol or aniline). The result is an azo compound with the general structure Ar–N=N–Ar'. These compounds are intensely coloured — many are used as dyes.
The reaction is an electrophilic aromatic substitution. The diazonium cation is a weak electrophile, so it only attacks rings that are strongly activated (with –OH, –NH₂, –NHR, –NR₂ groups). The coupling occurs at the para position if available; otherwise ortho.
Coupling requires the coupling component (phenol or aniline) to be in its reactive form: phenol is used in alkaline solution (phenoxide ion is more activating), aniline is used in slightly acidic or neutral solution (to avoid protonation of the amino group).
In both, first build 2,6-dibromo-4-nitroaniline (acetylate, nitrate para, hydrolyse, brominate the two positions ortho to –NH2). Then convert –NH2 to a diazonium salt: deaminate with H3PO2 for (i), or replace with iodide (KI) for (ii). …
Both targets share the intermediate 2,6-dibromo-4-nitroaniline, built by using the amino group to place –NO2 (para) and –Br (both ortho). The amino group is then diazotised and either removed (H3PO2 → H) to give the 3,5-dibromo product, or replaced by iodine (KI) to give the 3,5-dibromo-4-iodo product.
Common intermediate – 2,6-dibromo-4-nitroaniline
Aniline + (CH3CO)2O → acetanilide (protect the –NH2).
Acetanilide + HNO3/H2SO4 → p-nitroacetanilide (–NO2 enters para to the acetamido group).
p-Nitroacetanilide + H3O+ → p-nitroaniline (–NH2 at C1, –NO2 at C4).
p-Nitroaniline + 2 Br2 → 2,6-dibromo-4-nitroaniline. The strongly activating –NH2 directs Br to both ortho positions (C2, C6); the para position is blocked by –NO2.
Conversion (i) – to 3,5-dibromonitrobenzene
Diazotise: 2,6-dibromo-4-nitroaniline + NaNO2/HCl, 273–278 K → diazonium salt.
Deaminate: + H3PO2/H2O → –N2+ (C1) is replaced by –H. Renumbering from the nitro group, the two bromines are at positions 3 and 5 → 3,5-dibromonitrobenzene.
Conversion (ii) – to 3,5-dibromo-4-iodonitrobenzene
Method: Common-Intermediate Branching Synthesis (Build Once, Diverge at the Diazonium Stage)
Core Concept
When two related target molecules differ only in what replaces a diazonium group, build the shared polysubstituted diazonium salt first, then choose different final reagents for each target: H3PO2/H2O for reductive deamination (-N2+ to -H), or KI for direct replacement by iodine (-N2+ to -I).
Steps
Identify what the two targets have in common (here, the -Br positions and the -NO2 group) and what differs (target (i) has -H where target (ii) has -I).
Build the common intermediate using the acetylate, nitrate, hydrolyse, dibrominate sequence: aniline to acetanilide to p-nitroacetanilide to p-nitroaniline to (Br2, both positions ortho to -NH2, since para is blocked by -NO2) to 2,6-dibromo-4-nitroaniline.
Diazotise the common intermediate: NaNO2/HCl, 273-278 K gives the diazonium salt. …
Q.Nitrobenzene is treated with Sn/HCl to give a compound (X) which on treatment with NaNO2 and HCl at 278 K gives compound (Y). When the compound (Y) is treated with Cu/HBr , compound 'Z' is obtained. The compound 'Z' is
(A) Benzene
(B) Benzene diazonium bromide
(C) Phenol
(D) Bromobenzene
(E) Chlorobenzene
Q.A reagent that can be used to reduce benzene diazonium chloride to benzene is
(A) ethanol
(B) methanol
(C) methanoic acid
(D) acetone
(E) phosphorous acid
›Reveal solutionSolution
The diazonium −N2+ group can be reduced/replaced by hydrogen using ethanol (or hypophosphorous acid): C6H5N2+Cl−+C2H5OH→C6H6+CH3CHO+N2+HCl.
Among the options, ethanol is the standard NCERT reagent that reduces benzenediazonium chloride to benzene, liberating nitrogen while being itself oxidised to acetaldehyde. Methanol, methanoic acid, acetone and phosphoro …
Q.When benzene diazonium fluoroborate is heated with aqueous sodium nitrite solution in the presence of copper, the product formed is
(A) fluorobenzene
(B) benzene
(C) aniline
(D) nitrobenzene
(E) phenol
›Reveal solutionSolution
This is the diazonium route to nitroarenes: C6H5N2+BF4− with NaNO2/Cu gives nitrobenzene (−N2+ replaced by −NO2).
Benzene diazonium fluoroborate on warming with aqueous sodium nitrite in the presence of copper powder undergoes substitution of the diazonium group by a nitro group:
In the Gattermann reaction, a benzene diazonium salt is treated with copper powder and the corresponding halogen acid (HCl/HBr). Benzene diazonium chloride with Cu/HCl gives chlorobenzene (with loss of N2). It is the copp …
Q.The product formed, when benzene diazonium fluoroborate is heated with aqueous sodium nitrite solution in the presence of copper is
(A) fluorobenzene
(B) benzene
(C) phenol
(D) p-nitrophenol
(E) nitrobenzene
›Reveal solutionSolution
Heating benzene diazonium fluoroborate with aqueous sodium nitrite and copper gives nitrobenzene.
Concept and Intuition
This is a variant of the Sandmeyer/Balz reaction: the diazonium salt, in the presence of Cu and nitrite ion, has its -N2+ group replaced by -NO2, converting the arene to a nitroarene.
Step-by-Step Solution
C6H5N2+BF4- provides the aryl group with a displaceable diazonium.
With NaNO2 and Cu, the nitrite ion substitutes for N2. …