What are transverse waves? Give one example.

II. Short Answer Questions · Q3

Q. What are transverse waves? Give one example.

Tamil Nadu DgeTextbookSubjectiveImportance★★★★★est

14% · 10/73 Questions

✓ Free question

Concept understanding — Wave Type Classification

Wave Type Classification: From Intuition to Precision

Imagine you're standing at the edge of a still pond. You drop a pebble. Ripples spread outward in circles. Now imagine you're holding one end of a long rope tied to a wall. You flick your wrist once — a single hump travels down the rope, hits the wall, and comes back. These are both waves, but they behave differently. Why?

The key difference lies in what is moving versus what is waving.

The Core Intuition

A wave is a disturbance that carries energy from one place to another without permanently moving the medium itself. But the direction of that disturbance relative to the wave's travel direction gives us our first major classification.

Think of a crowd at a stadium doing "the wave." People stand up and sit down (the disturbance moves up-down), but the wave itself travels around the stadium (left-right). The motion of each person is perpendicular to the wave's travel. That's one type.

Now think of a slinky stretched on a table. If you push one end toward the other, a compression travels along the slinky. Each coil moves along the same line as the wave — forward and back. That's the other type.

The Precise Classification

Waves are classified into two fundamental types based on the relationship between the direction of particle displacement (how the medium moves) and the direction of wave propagation (which way the energy travels).

\perp

Transverse Waves

In a transverse wave, the particles of the medium oscillate perpendicular to the direction the wave travels.

Example: Light waves (electromagnetic waves), waves on a string, water waves (surface component), seismic S-waves
Key feature: The wave has crests (high points) and troughs (low points)
Visual: Think of a rope shaken up and down — the rope moves vertically, the wave moves horizontally

Longitudinal Waves

In a longitudinal wave, the particles of the medium oscillate parallel to the direction the wave travels.

Example: Sound waves in air, seismic P-waves, slinky compressions
Key feature: The wave has compressions (regions of high density) and rarefactions (regions of low density)
Visual: Think of a slinky pushed and pulled — coils bunch up and spread out along the same line the wave moves

Note

Some waves are neither purely transverse nor purely longitudinal. Water waves, for instance, have particles moving in circular paths — a combination of both. These are called surface waves or Rayleigh waves in seismology.

Why This Matters

This classification isn't just academic. It determines:

What materials a wave can travel through: Transverse waves (like light) can travel through vacuum. Longitudinal waves (like sound) need a medium. But mechanical transverse waves (like rope waves) also need a medium — the distinction is about how the medium moves, not whether a medium exists.
How waves interact with matter: Sound waves (longitudinal) can travel through solids, liquids, and gases. Seismic S-waves (transverse) cannot travel through liquids — this is how we know Earth's outer core is liquid.
Polarization: Only transverse waves can be polarized (aligned in a specific direction). This is why polarized sunglasses work — they block light waves oscillating in a particular plane.

Quick Reference Table

Property	Transverse	Longitudinal
Particle motion relative to wave	Perpendicular ( $\perp$ )	Parallel ( $\parallel$ )
Shape features	Crests & troughs	Compressions & rarefactions
Can travel in vacuum?	Yes (EM waves only)	No (needs medium)
Can be polarized?	Yes	No
Common examples	Light, rope waves, water surface	Sound, slinky, seismic P-waves

Tip

To remember which is which: Transverse has a T — think of a T-shape (perpendicular). Longitudinal has an L — think of a straight L-shape (parallel, same line).

The One-Sentence Takeaway

A wave is transverse if the medium moves sideways to the wave's direction; it is longitudinal if the medium moves along the same line as the wave.

Students searching for "Wave Type Classification: Definition, Formula & Real-World Examples" or "Wave Type Classification 11 physics" will find this explanation directly aligned with the Class 11 Physics curriculum prescribed under NCERT/CBSE. It is also a recurring theme in JEE Main, NEET and state engineering/medical entrance exams, so working through it carefully pays off well beyond board exams.

Step 1. In a transverse wave, the constituent particles of the medium oscillate about their mean positions in a direction perpendicular to the direction of propagation (energy transfer) of the wave.

Step 2. Example: light (an electromagnetic wave) -- its oscillating electric and magnetic fields point perpendicular to the direction the light travels. A mechanical example is a wave sent along a stretched string by shaking one end up and down.

✓Final answer

A transverse wave is one where particles vibrate perpendicular to the direction of propagation; light is the standard example.

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

Showing the 12 most recent of 18 on this concept.

CBSE 2026Set ANNUAL1 markMCQ
$Q. Why gases cannot support the propagation of transverse wave?$
(1) Gases are incompressible
(2) Gases have no shearing stress
(3) Density of gas is less
(4) Gases can flow
›Reveal solutionSolution

A transverse wave needs the medium to resist a sideways (shearing) deformation; gases cannot offer this, so they cannot carry transverse waves.

In a transverse wave, particles of the medium oscillate perpendicular to the direction of wave travel. For layers of the medium to pull each other sideways and pass this disturbance on, the medium must be able to sustain a shearing (tangential) stress — a restoring force that resists relative sliding of adjacent layers. Solids can do this because of rigidity (shear modulus). Gases (and liquids, to first approximation) have zero shear modulus — their molecules can slide past one another freely with no tangential restoring force. Hence a gas can only support longitudinal (compressional) waves such as sound, never transverse waves.

✓Final answer
$(2) Gases have no shearing stress — with no rigidity, a gas cannot generate the sideways restoring force a transverse wave requires.$
CBSE 2026Set ANNUAL1 markMCQ
$Q. The waves in which the particles of the medium vibrate perpendicular to the direction of wave propagation are called -$
(a) Transverse waves
(b) Progressive waves
(c) Longitudinal waves
(d) Stationary waves
›Reveal solutionSolution

A wave in which particles of the medium oscillate perpendicular to the direction of wave propagation is called a transverse wave (e.g. waves on a stretched string, electromagnetic waves).

Waves are broadly classified by how the medium's particles move relative to the wave's direction of travel. In a transverse wave, particles vibrate at right angles (perpendicular) to the direction of propagation — producing crests and troughs, as seen in waves on a string or water surface waves. This is different from a longitudinal wave (particles vibrate parallel to the direction of propagation, forming compressions and rarefactions, e.g. sound waves), a progressive wave (any wave that transports energy through the medium, transverse or longitudinal), and a stationary/standing wave (formed by superposition of two identical waves travelling in opposite directions, with fixed nodes and antinodes).

✓Final answer
$The correct option is (a) Transverse waves.$
CBSE 2026Set ANNUAL1 markMCQ
$Q. Assertion (A) : Sound waves cannot travel in Vacuum but light can travel in Vacuum. Reason (R) : Sound waves are longitudinal waves and cannot be polarised but electromagnetic waves are transverse and they can be polarised.$
(a) Both A and R are true, and R is the correct explanation for A.
(b) Both A and R are true and R is not the correct explanation for A.
(c) A is true but R is false.
(d) A is false but R is true.
›Reveal solutionSolution

Both statements are individually true, but the reason about polarisation does not correctly explain why sound cannot travel in vacuum while light can.

Checking Assertion (A): Sound is a mechanical wave — it needs a material medium (solid, liquid or gas) whose particles vibrate to carry the disturbance forward. In vacuum there are no particles to vibrate, so sound cannot travel through it. Light is an electromagnetic wave, made of oscillating electric and magnetic fields, and needs no material medium — it travels through vacuum (this is how sunlight reaches Earth). So A is TRUE.

Checking Reason (R): Sound waves are longitudinal (particle vibration is along the direction of propagation) and longitudinal waves cannot be polarised, since there is no transverse direction to restrict. Light (an electromagnetic wave) is transverse, and transverse waves can be polarised. So R is also TRUE as a standalone fact.

Does R explain A? No. The reason sound cannot travel through vacuum is that it is a MECHANICAL wave requiring a medium to carry the disturbance — this has nothing to do with whether the wave can be polarised. Polarisability is a separate property related to the transverse/longitudinal nature of the wave, not to whether a medium is required. So R, though true, is NOT the correct explanation of A.

✓Final answer
$The correct option is (b) Both A and R are true and R is not the correct explanation for A.$
CBSE 2026Set ANNUAL1 markMCQ
$Q. The path difference between the two waves y1 = a1 sin(ωt - 2πx/λ) and y2 = a2 cos(ωt - 2πx/λ + φ) is$
(a) (2π/λ)φ
(b) (λ/2π)φ
(c) (2π/λ)(φ + π/2)
(d) (λ/2π)(φ + π/2)
›Reveal solutionSolution

Convert cos to sin; extra phase = phi + pi/2; path difference = (lambda/2 pi)(phi + pi/2). Answer (D).

Given:

y1 = a1 sin(omega t - 2 pi x/lambda)

y2 = a2 cos(omega t - 2 pi x/lambda + phi).

Using cos(theta) = sin(theta + pi/2), rewrite y2:

y2 = a2 sin(omega t - 2 pi x/lambda + phi + pi/2).

Comparing the arguments of the two sine waves, the phase difference is:

delta_phi = (phi + pi/2).

The path difference is related to phase difference by: path difference = (lambda/2 pi) x delta_phi.

Therefore path difference = (lambda/2 pi)(phi + pi/2).

✓Final answer
$(D) (lambda/2 pi)(phi + pi/2).$
CBSE 2026Set ANNUAL1 markMCQ
$Q.When sound wave is refracted from air to water, which of the following will remain unchanged ?$
(a) Wavelength
(b) Velocity
(c) Frequency
(d) Angular wave number
›Reveal solutionSolution

On refraction the frequency stays the same; speed and wavelength change. Answer (C).

The frequency of a wave is determined by the source producing it. When the wave crosses from one medium to another, the number of wavefronts arriving per second (frequency) cannot change, otherwise energy would accumulate at the boundary.

What changes is the wave speed (higher in water for sound) and, correspondingly, the wavelength (since v = f lambda). The angular wave number k = 2 pi/lambda also changes. Only the frequency remains unchanged.

✓Final answer
$(C) Frequency.$
CBSE 2025Set ANNUAL1 markMCQ
$Q. Sound waves in air cannot be polarized because$
(a) their speed is less
(b) they require medium
(c) these are longitudinal
(d) their speed is temperature dependent
›Reveal solutionSolution

Polarization is a property exclusive to transverse waves, where oscillation direction (perpendicular to propagation) can be confined to a plane; sound waves in air are longitudinal (oscillation along the direction of propagation), so there is no perpendicular plane to restrict -- hence they cannot be polarized.

Polarization refers to restricting the oscillations of a transverse wave to a single plane containing the direction of propagation. This is possible only when the oscillation direction is perpendicular to the direction the wave travels (as with light or a wave on a string), since there are multiple perpendicular directions to choose from/restrict.

Sound waves in air are longitudinal waves -- the air molecules oscillate back and forth ALONG the same direction the wave travels (compressions and rarefactions), not perpendicular to it. There is no perpendicular plane of oscillation to selectively restrict, so the very concept of polarization does not apply to sound in air.

(Options (a), (b), (d) describe real properties of sound but are not the reason polarization is impossible.)

✓Final answer
$(c) these are longitudinal.$
CBSE 2025Set ANNUAL1 markMCQ
$Q. Which of the following is an example of longitudinal wave?$
(a) Sound wave in air
(b) Water waves
(c) Light waves
(d) Electromagnetic waves
›Reveal solutionSolution

Sound waves in air are longitudinal waves.

In a longitudinal wave, particles of the medium oscillate parallel to the direction of wave propagation, producing alternating regions of compression (particles close together) and rarefaction (particles spread apart). Sound waves in air are the classic example of this — as a sound wave passes through air, air molecules vibrate back and forth along the same line the sound travels.

In contrast, water waves and light waves (and electromagnetic waves in general) are transverse waves, where the oscillation is perpendicular to the direction of propagation.

✓Final answer
$The correct option is (a) Sound wave in air.$
CBSE 2025Set ANNUAL1 mark
$Q. Fill in the blank: The distance travelled by a wave in one time period is called .........$
›Reveal solutionSolution

The distance a wave travels in one time period is its wavelength.

A travelling wave repeats its pattern in space after a distance called the wavelength (lambda), and it repeats its pattern in time after an interval called the time period (T). Since the wave moves with speed v, and it advances exactly one wavelength during one time period, the two are related by v = lambda/T, or lambda = vT. Thus the distance covered by the wave in one time period is, by definition, one wavelength.

✓Final answer
$The distance travelled by a wave in one time period is called the wavelength (lambda).$
CBSE 2024Set ANNUAL1 markMCQ
$Q. Waves produced in open organ pipe is (A) longitudinal (B) transverse (C) both longitudinal and transverse (D) none of these$
›Reveal solutionSolution

Waves in an organ pipe (sound in air) are longitudinal.

In an organ pipe, the vibrating air column produces sound by alternating compressions and rarefactions of air, with the air particles oscillating back and forth parallel to the pipe's length (the direction of wave propagation) — the defining property of a longitudinal wave, unlike transverse waves where the oscillation is perpendicular to propagation.

✓Final answer
$(A) longitudinal.$
CBSE 2024Set ANNUAL1 markMCQ
$Q. What type of waves are produced in a vibrating string or organ pipe?$
(a) Transverse waves
(b) Longitudinal waves
(c) Electromagnetic waves
(d) Surface waves
›Reveal solutionSolution

A vibrating stretched string produces transverse waves; an organ pipe's air column actually produces longitudinal waves — these are two different cases, and since the question groups them together with only one answer choice allowed, this needs an honest caveat rather than a guess.

A vibrating string (as in a guitar or veena) has its particles oscillating perpendicular to the string's length, while the wave itself travels along the string — this is a transverse wave.

An organ pipe, however, produces sound through a vibrating AIR COLUMN, where air particles oscillate back and forth ALONG the direction the wave travels — this is a longitudinal wave, not transverse.

Both cases do form stationary (standing) waves by the superposition of incident and reflected waves, but their particle-motion TYPE differs: transverse for the string, longitudinal for the organ pipe's air column. Since only one of Transverse/Longitudinal/Electromagnetic/Surface can be picked and the question as worded combines two physically different examples, I've answered for the classic 'vibrating string' case (transverse waves); if the specific intent was the organ-pipe half, the correct answer there would instead be longitudinal waves.

✓Final answer
$(a) Transverse waves (for the vibrating-string case; the organ pipe's air column instead produces longitudinal waves — the question as worded combines two different examples).$
CBSE 2024Set SET-AP55001 mark
$Q. What are progressive waves?$
›Reveal solutionSolution

Progressive waves are waves that travel continuously through a medium, transferring energy from one point to another, unlike stationary waves which stay fixed in place.

In a progressive wave, disturbance (and the energy associated with it) actually propagates through the medium with a definite wave speed v. Every particle of the medium undergoes the SAME kind of periodic (often simple harmonic) oscillation with the same amplitude and frequency, but a particle farther along the direction of travel lags in phase behind particles closer to the source — this progressive phase lag is what makes the wave pattern appear to move.

This is different from a stationary (standing) wave, where the wave pattern itself does not move — certain points (nodes) never move at all, and there's no continuous transport of energy along the medium.

✓Final answer
$Progressive waves are waves that travel continuously through a medium carrying energy, with each particle performing the same oscillation but with an increasing phase lag along the direction of propagation.$
CBSE 2024Set ANNUAL1 markMCQ
$Q. Water waves are$
(a) longitudinal
(b) transverse
(c) both longitudinal & transverse
(d) neither longitudinal nor transverse
›Reveal solutionSolution

Water-surface waves make particles trace elliptical paths, combining both longitudinal and transverse motion at once.

In a purely longitudinal wave, particles oscillate parallel to the direction of wave propagation (e.g. sound); in a purely transverse wave, they oscillate perpendicular to it (e.g. a wave on a string). Water waves are neither purely one nor the other: a water particle at the surface moves in a roughly circular or elliptical path, which has both a component along the direction of propagation and a component perpendicular to it. Hence water waves are classified as having both longitudinal and transverse character.

✓Final answer
$The correct option is (c) both longitudinal & transverse.$

←Previous question · 11.13Q2 — Write down the types of waves.→Next question · 11.13Q4 — What are longitudinal waves? Give one example.

Q.What are transverse waves? Give one example.

🎓Unlock everything free for 14 days

Unlock everything free for 14 days