Q.A passenger arriving in a new town wishes to go from the station to a hotel located $10\ \text{km}$ away on a straight road from the station. A dishonest cabman takes him along a circuitous path $23\ \text{km}$ long and reaches the hotel in $28\ \text{min}$. What is

The problem is about relative motion in two dimensions. When you are inside a moving train and look at a motorcyclist outside, what you see is not the motorcyclist’s actual velocity, but the velocity of the motorcyclist relative to you — that is, the vector difference between the motorcyclist’s velocity and the train’s velocity.

The motorcyclist goes north at $10\ \mathrm{m/s}$. The train goes north-west at $10\sqrt{2}\ \mathrm{m/s}$. North-west means exactly halfway between north and west — a direction that makes a $45^\circ$ angle with both north and west. So the train’s velocity has equal components northward and westward.

We want the direction of the motorcyclist as seen from the train. That is the direction of the relative velocity vector $\vec{v}_{MT} = \vec{v}_M - \vec{v}_T$.

1. Set up coordinates. Let north be the $+y$ direction and east be the $+x$ direction. Then:

   • Motorcyclist’s velocity: $\vec{v}_M = 10\ \hat{j}\ \mathrm{m/s}$.
   • Train’s velocity: north-west means $45^\circ$ west of north. So its components are:
     • Northward: $10\sqrt{2} \cos 45^\circ = 10\sqrt{2} \times \frac{1}{\sqrt{2}} = 10\ \mathrm{m/s}$.
     • Westward: $10\sqrt{2} \sin 45^\circ = 10\ \mathrm{m/s}$.
     • Since west is the negative $x$-direction, $\vec{v}_T = -10\ \hat{i} + 10\ \hat{j}\ \mathrm{m/s}$.

2. Find the relative velocity. The velocity of the motorcyclist as seen by the passenger in the train is:

That is, $\vec{v}_{MT} = 10\ \mathrm{m/s}$ due east. …

The core idea here is relative motion. When an observer is moving, the rate at which they encounter objects that are also moving changes. This is because the relative speed between the observer and the objects determines how quickly the distance between them closes or opens.

Imagine a series of buses, equally spaced, moving along a road. If you stand still, you see a bus every $T$ minutes. This means the distance between any two consecutive buses is $v_b T$, where $v_b$ is the speed of the bus. Now, if you start moving, this observed time interval will change.

• If you move in the same direction as the buses, and slower than them, the buses will still overtake you, but they will appear to pass less frequently than if you were standing still. This is because the relative speed between you and the bus is reduced.
• If you move in the opposite direction to the buses, they will appear to pass more frequently. This is because the relative speed between you and the bus is increased.

We will use this principle to set up two equations based on the man's observations, and then solve for $T$.

1. Define variables and the constant spacing:

   Let $v_b$ be the speed of a bus and $v_m$ be the speed of the man.

   Buses leave every $T$ minutes. This means that at any given instant, the distance between two consecutive buses moving in the same direction is constant. Let's call this distance $L$.

   In time $T$, a bus travels a distance $v_b T$. So, the distance between two consecutive buses is $L = v_b T$. This distance $L$ is the key to relating the observed time intervals to the actual time interval $T$.

2. Consider buses moving in the same direction as the man (X to Y):

   The man is moving from X to Y. Buses also leave from X to Y.

   The man observes a bus passing him every $t_1$ minutes. For a bus to "go past him in the direction of his motion", the bus must be moving faster than the man. So, $v_b > v_m$.

   The relative speed of a bus with respect to the man is $v_{rel,1} = v_b - v_m$.

   In the time $t_1$, the man observes one bus pass, and then the next bus (which was $L$ distance behind the first one) also passes him. This means that in time $t_1$, the relative distance covered by the bus with respect to the man is $L$.

   Therefore, we can write:

   $L = v_{rel,1} \times t_1$

   Substituting $L = v_b T$ and $v_{rel,1} = v_b - v_m$:

3. Consider buses moving in the opposite direction to the man (Y to X): The man is moving from X to Y. Buses also leave from Y to X, meaning they are moving opposite to the man's direction. The man observes a bus passing him every $t_2$ minutes. …

The displacement–time relation $x = t^2 + 7$ encodes all the kinematics. Velocity comes from differentiating once, acceleration from differentiating twice. Once we have acceleration, Newton's second law gives the force, and the work–energy theorem connects force and displacement to the work done. The key is to extract each piece systematically.

Finding displacement when velocity is 2 m/s

1. Differentiate to find velocity.

2. Solve for the time when $v = 2$ m/s.

3. Substitute $t = 1$ s into the displacement equation.

Finding work done during the first 10 s

The cleanest route is the work–energy theorem: work done equals the change in kinetic energy.

4. Find the velocity at $t = 0$ s and $t = 10$ s.

   At $t = 0$: $v_0 = 2(0) = 0$ m/s

   At $t = 10$: $v_{10} = 2(10) = 20$ m/s

5. Compute the change in kinetic energy.

   $\Delta KE = \frac{1}{2}m v_{10}^2 - \frac{1}{2}m v_0^2 = \frac{1}{2}(2)(20)^2 - 0 = 400 \text{ J}$ …

The key idea here is that average velocity is not the same as instantaneous velocity. It’s simply the straight-line rate of change of position over a finite interval:

We don’t need calculus for this — just plug the given times into the position function and compute.

1. Find the position at $t = 2.00$ s

2. Find the position at $t = 4.00$ s

3. Compute the displacement

4. Compute the time interval

5. Average velocity …

The key idea is that the car leaves the cliff horizontally, so its initial vertical speed is zero. Gravity only affects the vertical motion, while horizontal speed stays constant (no air resistance). At the peak Z, the car has fallen a certain vertical distance, gaining vertical speed. The total speed is the vector sum of horizontal and vertical components. Instead of using time, we can use energy conservation: the loss in gravitational potential energy equals the gain in kinetic energy. That gives the final speed directly.

1. Identify the given data and the goal.

   Initial horizontal speed: $v_x = 10\ \mathrm{m/s}$ (constant throughout).

   Height fallen from cliff to peak Z: from the figure (not shown here, but typical in such problems) it is $h = 40\ \mathrm{m}$.

   We need the speed $v$ at Z.

2. Apply conservation of mechanical energy.

   Initial energy (at cliff X):

(taking the cliff as height $h$ above Z).

Final energy (at Z, height = 0):

Since no air resistance, $E_i = E_f$:

3. Cancel mass and solve for $v$.

Multiply by 2:

Substitute $v_x = 10\ \mathrm{m/s}$, $g = 10\ \mathrm{m/s^2}$, $h = 40\ \mathrm{m}$:

$v^2 = (10)^2 + 2 \cdot 10 \cdot 40 = 100 + 800 = 900$ …

Set up the two velocity vectors (origin, $x$ horizontal, $y$ vertical)

• Body 1, straight up: $\vec v_1 = (0,\ 10)~\text{m/s}$.
• Body 2, at $60^\circ$ to the vertical: vertical component $10\cos 60^\circ = 5$, horizontal component $10\sin 60^\circ = 5\sqrt3$, so $\vec v_2 = (5\sqrt3,\ 5)~\text{m/s}$.

Use relative motion

Both bodies have identical acceleration $\vec a = (0,-g)$, so the relative acceleration is zero. The relative velocity is constant:

$\Delta\vec v = \vec v_1 - \vec v_2 = (0-5\sqrt3,\ 10-5) = (-5\sqrt3,\ 5)~\text{m/s}.$ …