Q.Integrate the function (x+1)(x2+9)5x
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Partial Fraction Decomposition
Partial Fraction Decomposition
Adding x−12+x+23 over a common denominator gives x2+x−25x+1. Partial fraction decomposition reverses this — it breaks one complicated rational function back into a sum of simple pieces. Those pieces are far easier to integrate: ∫x−12dx=2log∣x−1∣ is immediate, while the combined fraction is not.
When it applies
You need a proper rational function, degP<degQ. If the numerator's degree is equal or higher, first do polynomial long division. The denominator Q(x) must be factored into linear and/or irreducible quadratic factors.
The standard forms
For Q(x)P(x) with Q fully factored, each factor contributes a term:
- Distinct linear (ax+b) → ax+bA.
- Repeated linear (ax+b)n → ax+bA1+(ax+b)2A2+⋯+(ax+b)nAn.
- Irreducible quadratic (ax2+bx+c) → ax2+bx+cAx+B — a linear numerator, not just a constant.
The unknown constants are found from the resulting equations; the decomposition is unique, which is what lets us solve for them systematically.
Worked example
Decompose x2−3x+23x+5. Factor the denominator: (x−1)(x−2). Set
(x−1)(x−2)3x+5=x−1A+x−2B.
Clear denominators: 3x+5=A(x−2)+B(x−1). Substituting the roots, x=1 gives 8=−A so A=−8, and x=2 gives 11=B. Hence
x2−3x+23x+5=x−1−8+x−211.
With distinct linear factors, substitute each factor's root to knock out all but one term — much faster than equating coefficients. …
The denominator has a linear factor and an irreducible quadratic, so
(x+1)(x2+9)5x=x+1A+x2+9Bx+C.
Clearing: 5x=A(x2+9)+(Bx+C)(x+1). Put x=−1: −5=10A⇒A=−21. Match x2: A+B=0⇒B=21; match constants: 9A+C=0⇒C=29 (check x-coeff: B+C=5 ✓).
Integrate term by term:
−21∫x+1dx=−21log∣x+1∣,21∫x2+9xdx=41log(x2+9), …
Decompose into x+1A+x2+9Bx+C with A=−21,B=21,C=29, then integrate to get −21log∣x+1∣+41log(x2+9)+23arctan3x+C.
Set-up
The factor x+1 is linear and x2+9 is irreducible (no real roots), so the irreducible quadratic gets a linear numerator:
(x+1)(x2+9)5x=x+1A+x2+9Bx+C.
1. Solve for the constants
Multiply through by (x+1)(x2+9):
5x=A(x2+9)+(Bx+C)(x+1).
- x=−1: −5=A(1+9)=10A⇒A=−21.
- Coefficient of x2: A+B=0⇒B=21.
- Constant term: 9A+C=0⇒C=29.
- Check coefficient of x: B+C=21+29=5 ✓.
So
(x+1)(x2+9)5x=−2(x+1)1+x2+921x+29.
2. Integrate each piece
−21∫x+1dx=−21log∣x+1∣.
For the quadratic part, split 21x+29: …
Method: Partial fractions with an irreducible quadratic factor
Use this for (x−r)(x2+c)P(x) where x2+c has no real roots: the quadratic gets a linear numerator Bx+C, not a constant.
Steps
Step 1: Set up the decomposition.
(x−r)(x2+c)P(x)=x−rA+x2+cBx+C.
Step 2: Solve for A,B,C.
Substitute the real root to get A quickly, then match coefficients of x2 and the constant term for B and C; verify with the x-coefficient. …
Common Mistakes
Mistake 1: Using a constant numerator over x2+9.
Why it's wrong: an irreducible quadratic factor needs a linear numerator Bx+C; a bare constant cannot represent the general partial fraction. Correct approach: write x2+9Bx+C.
Mistake 2: Not splitting the quadratic term before integrating. …
Showing the 12 most recent of 33 on this concept.
- TG EAPCET 2023Set eng-2023-05-13-FN1 markMCQQ.∫(x−2)(x2+1)1dx= (A) log∣x−2∣x2+1+2tan−1x+c (B) logx2+1∣x−2∣+2tan−1x+c (C) 51[log7+x2∣x−2∣+2tan−1x]+c (D) 51[log1+x2∣x−2∣−2tan−1x]+c
›Reveal solutionSolution
The integral is solved by partial fraction decomposition, leading to a combination of a logarithmic term and an arctangent term. The correct result is 51[logx2+1∣x−2∣+2tan−1x]+c, which matches option (C).
We have a rational function whose denominator factors into a linear term (x−2) and an irreducible quadratic (x2+1). The natural strategy is partial fractions, because the integrand is a proper rational function (degree of numerator < degree of denominator). This will break the integral into simpler pieces we can integrate directly.
1. Set up the partial fraction decomposition
We write:
(x−2)(x2+1)1=x−2A+x2+1Bx+C
The numerator for the quadratic term is linear because x2+1 cannot be factored further over the reals.
2. Clear denominators
Multiply both sides by (x−2)(x2+1):
1=A(x2+1)+(Bx+C)(x−2)
3. Expand and collect like terms
1=Ax2+A+Bx(x−2)+C(x−2)
=Ax2+A+Bx2−2Bx+Cx−2C
=(A+B)x2+(−2B+C)x+(A−2C)
4. Equate coefficients
Since the left side is 1=0x2+0x+1, we have:
⎩⎨⎧A+B=0−2B+C=0A−2C=1
5. Solve the system
From the first equation: B=−A.
From the second: C=2B=−2A.
Substitute into the third: A−2(−2A)=A+4A=5A=1, so A=51.
Then B=−51, C=−52.
6. Write the decomposed integrand
(x−2)(x2+1)1=x−21/5+x2+1−51x−52
7. Integrate term by term
∫(x−2)(x2+1)1dx=51∫x−2dx−51∫x2+1xdx−52∫x2+1dx
- First term: ∫x−2dx=log∣x−2∣+c1
- Second term: Let u=x2+1, du=2xdx, so ∫x2+1xdx=21log(x2+1)+c2
- Third term: ∫x2+1dx=tan−1x+c3
8. Combine results
=51log∣x−2∣−51⋅21log(x2+1)−52tan−1x+C
=51[log∣x−2∣−21log(x2+1)−2tan−1x]+C
9. Simplify the logarithmic part
Recall −21log(x2+1)=log((x2+1)−1/2)=logx2+11.
So:
log∣x−2∣+logx2+11=logx2+1∣x−2∣
Thus:
∫(x−2)(x2+1)1dx=51[logx2+1∣x−2∣−2tan−1x]+C …
- TG EAPCET 2021Set eng-2021-08-05-AN1 markMCQQ.The partial fraction decomposition of (x+3)(x2+1)9x−7 is (A) 5(x+3)17−5(x2+1)(17x−6) (B) 5(x+3)−17−5(x2+1)(17x−6) (C) 5(x+3)17+5(x2+1)(17x−6) (D) 5(x+3)−17+5(x2+1)(17x−6)
›Reveal solutionSolution
The key idea is to decompose a rational function with an irreducible quadratic factor into a sum of a linear-over-quadratic term and a constant-over-linear term, then solve for the unknown coefficients. The correct decomposition is option (D).
When you see a denominator with a linear factor (x+3) and an irreducible quadratic factor (x2+1), the standard partial fraction form is:
(x+3)(x2+1)9x−7=x+3A+x2+1Bx+C
The numerator over the quadratic must be linear (degree 1) because the denominator is degree 2 — a common point where students mistakenly put just a constant. The goal is to find A, B, and C by clearing denominators and equating coefficients.
- Set up the equation Multiply both sides by (x+3)(x2+1):
9x−7=A(x2+1)+(Bx+C)(x+3)
- Expand the right-hand side
A(x2+1)=Ax2+A
(Bx+C)(x+3)=Bx2+3Bx+Cx+3C=Bx2+(3B+C)x+3C
Adding them:
9x−7=(A+B)x2+(3B+C)x+(A+3C)
- Equate coefficients Comparing coefficients of x2, x, and the constant term gives three equations:
⎩⎨⎧A+B=03B+C=9A+3C=−7(coefficient of x2)(coefficient of x)(constant term)
- Solve the system From the first equation: B=−A. Substitute into the second: 3(−A)+C=9⟹−3A+C=9. The third equation is A+3C=−7. Solve these two:
−3A+CA+3C=9=−7
Multiply the first equation by 3: −9A+3C=27. Subtract the second equation from this:
(−9A+3C)−(A+3C)=27−(−7)⟹−10A=34⟹A=−1034=−517
Then B=−A=517. …
- TG EAPCET 2021Set eng-2021-08-06-AN1 markMCQQ.The partial fraction decomposition of (x−1)2(x+2)3x+1 is (A) 34(x−1)21+95x−11+95x+21 (B) −95(x+21)+34(x−1)21+x−12 (C) −95(x+21)+95x−11+34(x−1)21 (D) −95(x+21)+95x−11+(x−1)22
›Reveal solutionSolution
For a repeated linear factor (x−1)2, the partial fraction form must include both x−1A and (x−1)2B, plus x+2C. Solving gives the decomposition −95x+21+95x−11+34(x−1)21, which matches option (C).
The key idea: when a denominator has a repeated linear factor like (x−1)2, you cannot just write one term for it. You need a term for each power, from 1 up to the exponent. That’s the whole reason the standard form looks the way it does.
- Set up the correct form. Since (x−1)2 is a repeated factor, the decomposition is
(x−1)2(x+2)3x+1=x−1A+(x−1)2B+x+2C.
Notice: A goes with the first power, B with the square. A common mistake is to forget the A/(x−1) term entirely — that would be wrong.
- Clear denominators. Multiply both sides by (x−1)2(x+2):
3x+1=A(x−1)(x+2)+B(x+2)+C(x−1)2.
-
Solve for the constants.
The smartest way is to plug in convenient x values that make factors zero.
- For B: Set x=1. Then (x−1)=0, so the A and C terms vanish:
3(1)+1=B(1+2)⇒4=3B⇒B=34.
- For C: Set x=−2. Then (x+2)=0, so the A and B terms vanish:
3(−2)+1=C(−2−1)2⇒−5=C(9)⇒C=−95.
- For A: Now pick any other x, say x=0, and substitute B and C:
3(0)+1=A(0−1)(0+2)+34(0+2)+(−95)(0−1)2.
That gives1=A(−1)(2)+34(2)−95(1)=−2A+38−95.
Combine the fractions: $\frac{8}{3} = \frac{24}{9}$, so $\frac{24}{9} - \frac{5}{9} = \frac{19}{9}$. Then $$ … - TG EAPCET 2025Set eng-2025-05-02-AN1 markMCQQ.If (x+2)(x2+1)x2−3=x+2A+x2+1Bx+C then 3A+2B−C= (A) 58 (B) 516 (C) 53 (D) 519
›Reveal solutionSolution
Solving the partial-fraction system gives A=51, B=54, C=−58, so 3A+2B−C=519, option (D).
Clear denominators in (x+2)(x2+1)x2−3=x+2A+x2+1Bx+C:
x2−3=A(x2+1)+(Bx+C)(x+2)=(A+B)x2+(2B+C)x+(A+2C).
Matching coefficients:
A+B=1,2B+C=0,A+2C=−3. …
- TG EAPCET 2021Set eng-2021-08-04-AN1 markMCQQ.If (x+3)(x2+1)9x−7=x+3A+x2+1Bx+C where A,B,C∈R, then A+B+C= (A) 517 (B) 5−6 (C) 56 (D) 5−17
›Reveal solutionSolution
Use partial fractions to match coefficients; solving gives A=−517, B=517, C=−56, so A+B+C=−56.
The core idea here is partial fraction decomposition — breaking a rational function into simpler pieces that are easier to integrate or manipulate. The given form tells us exactly what denominators to expect: a linear factor (x+3) and an irreducible quadratic (x2+1). The numerator over the quadratic is linear (Bx+C) because the quadratic can't factor further over the reals.
We don't integrate here; we just find the constants A, B, C by equating numerators after clearing denominators.
- Clear denominators. Multiply both sides by (x+3)(x2+1):
9x−7=A(x2+1)+(Bx+C)(x+3).
- Expand the right-hand side:
A(x2+1)=Ax2+A,
(Bx+C)(x+3)=Bx2+3Bx+Cx+3C=Bx2+(3B+C)x+3C.
Adding them:
(A+B)x2+(3B+C)x+(A+3C).
-
Equate coefficients with the left-hand side 9x−7, which is 0x2+9x−7:
- Coefficient of x2: A+B=0 → B=−A.
- Coefficient of x: 3B+C=9.
- Constant term: A+3C=−7.
-
Solve the system. From B=−A, substitute into 3B+C=9:
3(−A)+C=9⇒−3A+C=9.
Now we have:
−3A+C=9,
A+3C=−7.
Solve these. Multiply the first equation by 3: −9A+3C=27. Subtract the second equation from this: …
- TG EAPCET 2026Set eng-2026-05-09-FN1 markMCQQ.If (x4+5x2+6)(x6+x4)x2+1=x4A+x2B+x2+2C+x2+3D, then A−B= (A) 3613 (B) 3611 (C) 92 (D) −21
›Reveal solutionSolution
The key is to factor the denominator completely, then match the given partial-fraction form to the actual decomposition. After simplifying, we find A−B=3611, which is option (B).
The problem gives a partial-fraction expansion with four terms, but the left-hand side has a denominator that factors into products of quadratics and powers of x. The trick is that the given form is not the standard partial-fraction decomposition — it’s a specific rearrangement. We need to find A and B by comparing coefficients after clearing denominators.
Let’s work through it step by step.
- Factor the denominator completely. The left-hand side is
(x4+5x2+6)(x6+x4)x2+1.
First, x6+x4=x4(x2+1).
Next, x4+5x2+6 is quadratic in x2: let u=x2, then u2+5u+6=(u+2)(u+3)=(x2+2)(x2+3).
So the whole denominator is
(x2+2)(x2+3)⋅x4(x2+1).
Notice the x2+1 in the numerator cancels with the x2+1 in the denominator!
Hence the expression simplifies to
x4(x2+2)(x2+3)1.
- Set up the given partial-fraction form. We are told
x4(x2+2)(x2+3)1=x4A+x2B+x2+2C+x2+3D.
Multiply both sides by x4(x2+2)(x2+3) to clear denominators:
1=A(x2+2)(x2+3)+Bx2(x2+2)(x2+3)+Cx4(x2+3)+Dx4(x2+2).
-
Expand and collect powers of x.
Compute each term:
- A(x2+2)(x2+3)=A(x4+5x2+6).
- Bx2(x4+5x2+6)=B(x6+5x4+6x2).
- Cx4(x2+3)=C(x6+3x4).
- Dx4(x2+2)=D(x6+2x4).
Summing, the coefficient of each power of x on the right must match the left side, which is just the constant 1 (i.e., coefficient of x0 is 1, all others 0).
Collect by powers:
- x6: B+C+D=0
- x4: A+5B+3C+2D=0 …
- TG EAPCET 2023Set eng-2023-05-12-AN1 markMCQQ.If (x2+1)(x−1)2x+1=x2+1Ax+B+x−1C+(x−1)2D, then A+B+C+D= (A) −21 (B) 21 (C) 1 (D) 23
›Reveal solutionSolution
We decompose the given rational function into partial fractions by equating numerators and solving for the coefficients A,B,C,D. The sum A+B+C+D is 21.
Concept and Intuition
Partial fraction decomposition is a technique used to break down a complex rational function (a fraction where the numerator and denominator are polynomials) into a sum of simpler fractions. This process is particularly useful in calculus for integration, but it's also a fundamental algebraic skill.
The core idea is that any proper rational function Q(x)P(x) (where the degree of P(x) is less than the degree of Q(x)) can be expressed as a sum of simpler fractions whose denominators are the factors of Q(x). The form of these simpler fractions depends on the nature of the factors in the denominator Q(x):
- Linear Factor (ax+b): For each non-repeated linear factor, there is a term of the form ax+bA.
- Repeated Linear Factor (ax+b)n: For each repeated linear factor, there are n terms of the form ax+bA1+(ax+b)2A2+⋯+(ax+b)nAn.
- Irreducible Quadratic Factor (ax2+bx+c): For each non-repeated irreducible quadratic factor (one that cannot be factored into linear factors with real coefficients, i.e., b2−4ac<0), there is a term of the form ax2+bx+cAx+B.
- Repeated Irreducible Quadratic Factor (ax2+bx+c)n: For each repeated irreducible quadratic factor, there are n terms of the form ax2+bx+cA1x+B1+(ax2+bx+c)2A2x+B2+⋯+(ax2+bx+c)nAnx+Bn.
In this problem, the denominator is (x2+1)(x−1)2.
- (x2+1) is an irreducible quadratic factor.
- (x−1)2 is a repeated linear factor.
The given partial fraction form x2+1Ax+B+x−1C+(x−1)2D correctly follows these rules. Our task is to find the unknown coefficients A,B,C,D.
Step-by-Step Solution
- Combine the terms on the right-hand side: To find the coefficients, we first combine the partial fractions on the right-hand side using a common denominator, which will be (x2+1)(x−1)2.
x2+1Ax+B+x−1C+(x−1)2D=(x2+1)(x−1)2(Ax+B)(x−1)2+C(x2+1)(x−1)+D(x2+1)
- Equate the numerators: Since the denominators are identical, the numerators must be equal.
x+1=(Ax+B)(x−1)2+C(x2+1)(x−1)+D(x2+1)
This equation must hold true for all values of $x$. We can use a combination of substituting convenient values of $x$ and equating coefficients of powers of $x$ to find $A, B, C, D$.3. Find the coefficients using substitution and equating coefficients:
* **Substitute $x=1$:** This value makes the terms involving $(x-1)$ and $(x-1)^2$ zero, allowing us to find $D$ directly.1+1=(A(1)+B)(1−1)2+C(12+1)(1−1)+D(12+1)
2=(A+B)(0)+C(2)(0)+D(2)
2=2D⟹D=1
* **Substitute $x=0$:** This value often simplifies expressions involving $x$. Substitute $D=1$ into the main numerator equation:x+1=(Ax+B)(x−1)2+C(x2+1)(x−1)+(x2+1)
Now, substitute $x=0$:0+1=(A(0)+B)(0−1)2+C(02+1)(0−1)+(02+1)
1=B(1)2+C(1)(−1)+1
1=B−C+1
0=B−C⟹B=C
* **Substitute $x=-1$:** This is another convenient value. Substitute $D=1$ and $B=C$ into the main numerator equation: … - TG EAPCET 2022Set eng-2022-07-19-AN1 markMCQQ.If dxd((x+1)2(x−2)2x+1)=(x−2)2A+(x+2)3B+(x+1)2C then A+B+C= (A) 3−2 (B) 32 (C) 31 (D) 3−1
›Reveal solutionSolution
The problem asks for the sum of constants in a partial-fraction-like decomposition of a derivative. By differentiating the given rational function and matching the form, we find A+B+C=−32, which corresponds to option (A).
The key insight here is that the derivative of a rational function can be expressed as a sum of simpler fractions, but the given form is not a standard partial fraction decomposition — it’s a template for the derivative itself. The constants A, B, C are not from splitting the original function, but from rewriting its derivative in that specific pattern. So we must differentiate first, then compare.
Let’s work through it.
-
Differentiate the given function.
Let f(x)=(x+1)2(x−2)2x+1.
Use the quotient rule: f′(x)=v2u′v−uv′, where u=2x+1 and v=(x+1)2(x−2).
First, u′=2.
For v′, use the product rule: v=(x+1)2⋅(x−2).
Derivative: v′=2(x+1)(1)⋅(x−2)+(x+1)2⋅1=2(x+1)(x−2)+(x+1)2.
Simplify: v′=(x+1)[2(x−2)+(x+1)]=(x+1)(2x−4+x+1)=(x+1)(3x−3)=3(x+1)(x−1).
So f′(x)=(x+1)4(x−2)22⋅(x+1)2(x−2)−(2x+1)⋅3(x+1)(x−1).
-
Simplify the numerator.
Factor out (x+1) from the numerator (common factor):
Numerator =(x+1)[2(x+1)(x−2)−3(2x+1)(x−1)].
Expand inside:
2(x+1)(x−2)=2(x2−x−2)=2x2−2x−4.
3(2x+1)(x−1)=3(2x2−2x+x−1)=3(2x2−x−1)=6x2−3x−3.
Subtract: (2x2−2x−4)−(6x2−3x−3)=−4x2+x−1.
So numerator =(x+1)(−4x2+x−1).
Thus f′(x)=(x+1)4(x−2)2(x+1)(−4x2+x−1)=(x+1)3(x−2)2−4x2+x−1.
-
Match to the given form.
We are told f′(x)=(x−2)2A+(x+2)3B+(x+1)2C.
But our denominator has factors (x+1)3 and (x−2)2 — note the (x+2)3 term in the given form is suspicious. That’s likely a typo in the problem statement (common in such questions); it should be (x+1)3 instead of (x+2)3. We’ll proceed assuming the intended form is (x−2)2A+(x+1)3B+(x+1)2C.
So we need to decompose (x+1)3(x−2)2−4x2+x−1 into partial fractions with denominators as above.
-
Set up the decomposition.
Write:
(x+1)3(x−2)2−4x2+x−1=(x−2)2A+(x+1)3B+(x+1)2C.
Multiply both sides by (x+1)3(x−2)2:
−4x2+x−1=A(x+1)3+B(x−2)2+C(x+1)(x−2)2.
- Find constants by substitution.
- Put x=2: −4(4)+2−1=−16+1=−15. …
-
- TG EAPCET 2025Set eng-2025-05-03-AN1 markMCQQ.If (x2+2)(x2+3)x2+1=x2+2Ax+B+x2+3Cx+D, then A+B+C+D= (A) 0 (B) 1 (C) −1 (D) 6
›Reveal solutionSolution
We decompose the rational function into partial fractions with linear numerators, then equate coefficients to solve for A, B, C, D; summing them gives 0.
We are given:
(x2+2)(x2+3)x2+1=x2+2Ax+B+x2+3Cx+D
and need A+B+C+D.
Concept & Intuition
Since the denominator factors are irreducible quadratics, each partial fraction gets a linear numerator (Ax+B form). The standard method: multiply through by the common denominator, expand, and equate coefficients of like powers of x. This yields a system of equations for A,B,C,D. Summing them is then trivial.
Step-by-step
- Clear denominators Multiply both sides by (x2+2)(x2+3):
x2+1=(Ax+B)(x2+3)+(Cx+D)(x2+2)
- Expand each term
(Ax+B)(x2+3)=Ax3+3Ax+Bx2+3B
(Cx+D)(x2+2)=Cx3+2Cx+Dx2+2D
- Combine like powers
x2+1=(A+C)x3+(B+D)x2+(3A+2C)x+(3B+2D)
-
Equate coefficients
- Coefficient of x3: A+C=0
- Coefficient of x2: B+D=1
- Coefficient of x1: 3A+2C=0
- Constant term: 3B+2D=1
-
Solve the system
From A+C=0 we have C=−A.
Substitute into 3A+2C=0: 3A+2(−A)=A=0 → A=0, then C=0.
From B+D=1 we have D=1−B. …
- TG EAPCET 2025Set eng-2025-05-03-FN1 markMCQQ.If (x2+2)(x2+3)x2+1=x2+2Ax+B+x2+3Cx+D, then A+B+C+D= (A) 1 (B) 0 (C) −1 (D) 6
›Reveal solutionSolution
The key idea is to combine the partial fractions into a single rational expression, equate numerators, and solve for the constants. The sum A+B+C+D turns out to be 0.
We are given the partial fraction decomposition:
(x2+2)(x2+3)x2+1=x2+2Ax+B+x2+3Cx+D
We need A+B+C+D. The natural approach: combine the right-hand side over a common denominator, match coefficients, and solve.
1. Combine the fractions on the right.
x2+2Ax+B+x2+3Cx+D=(x2+2)(x2+3)(Ax+B)(x2+3)+(Cx+D)(x2+2)
Since the denominators are already equal, we equate the numerators:
x2+1=(Ax+B)(x2+3)+(Cx+D)(x2+2)
2. Expand both products.
First term: (Ax+B)(x2+3)=Ax3+3Ax+Bx2+3B
Second term: (Cx+D)(x2+2)=Cx3+2Cx+Dx2+2D
Add them:
(A+C)x3+(B+D)x2+(3A+2C)x+(3B+2D)
So we have:
x2+1=(A+C)x3+(B+D)x2+(3A+2C)x+(3B+2D)
3. Equate coefficients.
The left side has no x3 term, no x term, constant term 1, and x2 coefficient 1. So:
- Coefficient of x3: A+C=0
- Coefficient of x2: B+D=1
- Coefficient of x: 3A+2C=0
- Constant term: 3B+2D=1
4. Solve the system.
From A+C=0 we have C=−A.
Plug into 3A+2C=0: 3A+2(−A)=3A−2A=A=0.
Thus A=0 and then C=0. …
- TG EAPCET 2026Set eng-2026-05-09-AN1 markMCQQ.
[!FORMULA] x4−5x2+42x3+x−3=
(A) 4(x2−3x+2)5(x−1)+4(x2+3x+2)3x+1 (B) 4(x2−3x+2)5(x+1)+4(x2+3x+2)3x−1 (C) x−12+4(x−2)5−x+11+4(x+2)7 (D) 4(x−2)5−x+11+4(x+2)7›Reveal solutionSolution
The key idea is to decompose the rational function into partial fractions by factoring the denominator completely, then matching the result to one of the given options. The correct decomposition is option (C).
We start with the rational expression:
x4−5x2+42x3+x−3
Concept and Intuition
Partial fraction decomposition is the reverse of combining fractions. Here, the denominator is a quartic that factors nicely into quadratics, and then into linear factors. Since the numerator’s degree (3) is less than the denominator’s (4), we can decompose directly into simpler fractions with linear denominators. The trick is to factor carefully and then solve for constants by equating coefficients or substituting convenient values.
Step-by-step solution
- Factor the denominator Notice x4−5x2+4 is quadratic in x2. Let u=x2:
u2−5u+4=(u−1)(u−4)=(x2−1)(x2−4)
Then factor each difference of squares:
x2−1=(x−1)(x+1),x2−4=(x−2)(x+2)
So the denominator is:
(x−1)(x+1)(x−2)(x+2)
- Set up the partial fraction form Since all factors are linear and distinct, we write:
(x−1)(x+1)(x−2)(x+2)2x3+x−3=x−1A+x+1B+x−2C+x+2D
- Clear denominators Multiply both sides by (x−1)(x+1)(x−2)(x+2):
2x3+x−3=A(x+1)(x−2)(x+2)+B(x−1)(x−2)(x+2)+C(x−1)(x+1)(x+2)+D(x−1)(x+1)(x−2)
-
Solve for constants using convenient x values
- For x=1: The terms with B,C,D vanish because they contain (x−1). Left side: 2(1)3+1−3=0. Right side: A(2)(−1)(3)=−6A. So −6A=0⇒A=0.
- For x=−1: Terms with A,C,D vanish (contain x+1). Left side: 2(−1)3+(−1)−3=−2−1−3=−6. Right side: B(−2)(−3)(1)=6B. So 6B=−6⇒B=−1.
- For x=2: Terms with A,B,D vanish (contain x−2). Left side: 2(8)+2−3=16−1=15. Right side: C(1)(3)(4)=12C. So 12C=15⇒C=1215=45.
- For x=−2: Terms with A,B,C vanish (contain x+2). Left side: 2(−8)−2−3=−16−5=−21. Right side: D(−3)(−1)(−4)=−12D. So −12D=−21⇒D=1221=47.
-
Write the decomposition
With A=0, B=−1, C=45, D=47:
x4−5x2+42x3+x−3=x−10+x+1−1+x−25/4+x+27/4
Simplify:
=−x+11+4(x−2)5+4(x+2)7
- Match with the options Option (C) is: x−12+4(x−2)5−x+11+4(x+2)7 …
- TG EAPCET 2025Set eng-2025-05-04-FN1 markMCQQ.If (x−1)2(x2+1)3x+1=x−1A+(x−1)2B+x2+1Cx+D, then 2(A−C+B+D)= (A) −1 (B) 2 (C) 0 (D) 1
›Reveal solutionSolution
This is a partial fractions problem where we equate numerators after finding a common denominator, solve for the constants by comparing coefficients or substituting strategic values, and then evaluate the given expression. The final value is 0.
The key idea here is that when you have a rational function and its partial fraction decomposition, the two expressions are identically equal for all x (except at the poles). That means the numerators must match after putting everything over the common denominator. We can find A, B, C, and D by either comparing coefficients of powers of x or by substituting convenient values of x that simplify the algebra.
Let’s work through it step by step.
- Set up the equation. We are given:
(x−1)2(x2+1)3x+1=x−1A+(x−1)2B+x2+1Cx+D
Multiply both sides by the common denominator (x−1)2(x2+1):
3x+1=A(x−1)(x2+1)+B(x2+1)+(Cx+D)(x−1)2
-
Expand each term carefully.
- First term: A(x−1)(x2+1)=A[(x)(x2+1)−1⋅(x2+1)]=A(x3+x−x2−1)=A(x3−x2+x−1)
- Second term: B(x2+1)=Bx2+B
- Third term: (Cx+D)(x−1)2=(Cx+D)(x2−2x+1) Expand: Cx(x2−2x+1)=Cx3−2Cx2+Cx and D(x2−2x+1)=Dx2−2Dx+D So together: Cx3+(−2C+D)x2+(C−2D)x+D
-
Combine all terms on the right-hand side.
Collecting by powers of x:
x3x2x1x0:A+C:−A+B−2C+D:A+C−2D:−A+B+D
The left-hand side is 3x+1, which is 0⋅x3+0⋅x2+3x+1.
- Equate coefficients. This gives us a system of equations:
⎩⎨⎧A+C=0−A+B−2C+D=0A+C−2D=3−A+B+D=1(1)(2)(3)(4)
- Solve the system. From (1): C=−A. Substitute into (3): A+(−A)−2D=3⟹−2D=3⟹D=−23. Now (4): −A+B−23=1⟹−A+B=25. And (2): −A+B−2(−A)−23=0⟹−A+B+2A−23=0⟹A+B=23. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.