First a set of $n$ equal resistors of $R$ each are connected in series to a battery of emf $E$ and internal resistance $R$. A current $I$ is observed to flow. Then the $n$ resistors are connected in parallel to the same battery. It is observed that the current is increased 10 times. What is '$n$'?

First a set of n equal resistors of R each are connected in series to a battery of emf E and internal resistan

NCERT Exemplar · Q16

n

Uttar Pradesh UpmspSubjective· 3mImportance★★★★★

76% · 32/42 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Internal Resistance

Internal Resistance – The Battery That Fights Itself

Imagine you have a bucket of water with a tap at the bottom. When you open the tap fully, water flows out freely. But if the pipe is narrow or clogged, the flow is weaker even though the bucket is full. A battery behaves the same way: it has a "full bucket" of electrical energy (its emf, or electromotive force), but inside the battery, there is always some "clogged pipe" that resists the flow of charge. That clog is called internal resistance.

The Intuition

Every real battery is not a perfect source of voltage. If you connect a small bulb to a fresh battery, it glows brightly. But if you connect a powerful motor that draws a large current, the same battery might struggle — the voltage at its terminals drops, and the motor runs slower. Why? Because inside the battery, the chemical reactions and the materials themselves have a natural opposition to the flow of charge. This opposition is internal resistance, denoted by $r$ (or sometimes $R_{\text{int}}$ ).

Think of it this way: the battery has two "battles" to fight. First, it must push charge through the external circuit (the bulb, the motor, the wires). Second, it must push charge through its own internal structure. The harder it has to push (i.e., the larger the current), the more voltage it "loses" inside itself.

The Precise Statement

Internal resistance is the opposition to the flow of electric current offered by the materials and chemical processes inside a source of emf (like a battery, cell, or generator). It is measured in ohms ( $\Omega$ ).

For a cell or battery, the relationship between the emf ( $\mathcal{E}$ ), the terminal voltage ( $V$ ), the current ( $I$ ), and the internal resistance ( $r$ ) is given by:

V = \mathcal{E} - I r

This is the single most important equation to remember.

V = \mathcal{E} - I r

Here:

$\mathcal{E}$ is the electromotive force — the maximum voltage the battery can provide when no current flows (open circuit). Think of it as the "ideal" voltage.
$V$ is the terminal voltage — the actual voltage you measure across the battery's terminals when it is delivering current.
$I$ is the current flowing through the circuit (and therefore through the battery itself).
$r$ is the internal resistance.

The term $I r$ is the voltage drop inside the battery. It is the "price" the battery pays for delivering current.

What Happens in Different Situations?

Condition	Current $I$	Terminal Voltage $V$	Why?
Open circuit (no load)	$I = 0$	$V = \mathcal{E}$	No current means no internal drop.
Small load (e.g., a dim bulb)	Small $I$	$V \approx \mathcal{E}$	The $I r$ term is tiny.
Large load (e.g., a powerful motor)	Large $I$	$V < \mathcal{E}$ significantly	The $I r$ drop becomes noticeable.
Short circuit (wires directly across terminals)	Very large $I$	$V \approx 0$	Almost all voltage is lost inside the battery; the battery heats up and may be damaged.

Watch out

A common mistake is to think that internal resistance is a "bad" thing that can be eliminated. It cannot — every real source has some internal resistance. Even a brand new AA battery has a small $r$ (typically $0.1$ to $0.5\ \Omega$ ). Old or weak batteries have much larger $r$ , which is why they fail to power high-current devices.

Why Does Internal Resistance Matter?

Power loss inside the battery: The power dissipated as heat inside the battery is $P_{\text{loss}} = I^2 r$ . This is why batteries get warm when delivering large currents.
Maximum power transfer: There is a famous theorem (Maximum Power Transfer Theorem) that says a source delivers maximum power to an external load when the load resistance equals the internal resistance ( $R_{\text{load}} = r$ ). But this is inefficient — half the power is wasted inside the source. …

Why this formula?

Internal Resistance: Why the Key Formulas Hold

Internal resistance is a fundamental concept in real-world circuits. No battery is perfect — every practical source has some internal resistance ( $r$ ) that opposes the flow of current inside the source itself.

1. The Core Idea: A Real Battery = An Ideal Source + A Resistor

Think of a real battery as:

An ideal EMF source ( $\mathcal{E}$ ) — provides constant voltage with zero internal resistance.
A small resistor ( $r$ ) — connected in series inside the battery.

Why series? Because the current that leaves the battery must first pass through its internal material (electrolyte, electrodes), which offers resistance.

2. The Terminal Voltage Formula

When the battery delivers current $I$ to an external circuit:

The ideal source produces $\mathcal{E}$ .
The internal resistor $r$ drops some voltage: $V_{\text{drop}} = I r$ (Ohm's law).
The voltage available at the terminals ( $V$ ) is what's left:

V = \mathcal{E} - I r

Why this makes sense:

If $I = 0$ (open circuit), $V = \mathcal{E}$ — you measure the full EMF.
If $I$ increases, $V$ decreases — the internal drop grows.
If $I$ is huge (short circuit), $V \to 0$ and all voltage is lost inside.

3. The Short-Circuit Current Formula

If you connect the terminals directly (external resistance $R = 0$ ):

The only resistance in the circuit is $r$ .
By Ohm's law: $I_{\text{short}} = \frac{\mathcal{E}}{r}$

Why this holds:

The entire EMF is now dropped across $r$ alone.
This is the maximum current the battery can deliver — limited by its internal resistance.
In practice, this can damage the battery (heating, chemical damage).

4. Power Delivered to External Load

When the battery is connected to an external load $R$ :

Total circuit resistance: $R + r$
Current: $I = \frac{\mathcal{E}}{R + r}$
Power delivered to the external load ( $P_{\text{out}}$ ):

P_{\text{out}} = I^2 R = \left( \frac{\mathcal{E}}{R + r} \right)^2 R

Why this matters:

Power is not simply $\mathcal{E}^2 / R$ — because $r$ limits current. …

Start your 14-day free trial to unlock the full solution →

The key idea is to apply Ohm’s law to both series and parallel configurations, using the battery’s internal resistance $R$ in each case. The condition that the parallel current is 10 times the series current leads to a quadratic in $n$ , whose positive solution is $n = 10$ .

Why this approach works

The problem gives you two circuits built from the same battery (emf $E$ , internal resistance $R$ ) and the same $n$ identical resistors (each of value $R$ ). In the series case, the total external resistance is $nR$ ; in the parallel case, it is $R/n$ . The battery’s internal resistance $R$ is always in series with the external load. So the total circuit resistance in each case is just the sum of the external resistance and the internal resistance. Then Ohm’s law gives the current. The only unknown is $n$ , and the ratio of the two currents is given as 10. That gives an equation you can solve.

Step-by-step solution

Series connection When $n$ resistors, each $R$ , are connected in series, the total external resistance is

R_{\text{ext, series}} = nR.

The battery has internal resistance $R$ , so the total circuit resistance is

R_{\text{total, series}} = nR + R = (n+1)R.

The current $I$ is therefore

I = \frac{E}{(n+1)R}.

Parallel connection When the same $n$ resistors are connected in parallel, the equivalent external resistance is

R_{\text{ext, parallel}} = \frac{R}{n}.

Adding the internal resistance $R$ gives

R_{\text{total, parallel}} = \frac{R}{n} + R = R\left(1 + \frac{1}{n}\right) = R\left(\frac{n+1}{n}\right).

The current in this case, call it $I'$ , is

I' = \frac{E}{R\left(\frac{n+1}{n}\right)} = \frac{nE}{(n+1)R}.

Using the given ratio The problem states that the parallel current is 10 times the series current:

I' = 10 I.

Substitute the expressions from steps 1 and 2: …

Start your 14-day free trial to unlock the full solution →

←Previous questionQ15 — A cell of emf E and internal resistance r is connected across an exter…→Next questionQ17 — Let there be n resistors R₁ … Rₙ with Rmax = max(R₁ … Rₙ) and Rmin = m…

Concept understanding — Internal Resistance

Internal Resistance – The Battery That Fights Itself

The Intuition

The Precise Statement

What Happens in Different Situations?

Why Does Internal Resistance Matter?

Why this formula?

Internal Resistance: Why the Key Formulas Hold

1. The Core Idea: A Real Battery = An Ideal Source + A Resistor

2. The Terminal Voltage Formula

3. The Short-Circuit Current Formula

4. Power Delivered to External Load

Method: Comparing Series vs Parallel Combinations Through a Real Battery

Steps

🎓Unlock everything free for 14 days

Unlock everything free for 14 days