Q.Find the domain and range of the real function f(x)=x−4.
Concept understanding — Domain and Range of a Function
For a real function given only by its algebraic formula, the domain (unless stated otherwise) is the largest subset of R on which the formula is well-defined — found by excluding any x that makes a denominator zero, makes the expression under an even root negative, or makes the argument of a logarithm non-positive. The range is the actual set of output values the formula produces as x runs over the domain, found by algebraic reasoning (such as solving y=f(x) for x and asking which y give a real, in-domain x) rather than by a single fixed rule, since it depends entirely on the specific formula.
Need x−4≥0 for the domain; a square root is never negative, giving the range.
Domain =[4,∞), range =[0,∞)
Step 1: x−4 needs x−4≥0, i.e. x≥4; domain =[4,∞).
Step 2: As x increases from 4 to ∞, x−4 increases from 0 to ∞, so x−4 increases from 0 to ∞ without bound.
Step 3: Range =[0,∞).
Domain =[4,∞), range =[0,∞)
Set the expression under the root ≥0 for the domain, then track the resulting range of values the root can take.
- Writing the domain as x>4 (strict inequality), forgetting that x=4 gives 0=0, which is defined.
- Reporting the range starting from a value other than 0.
- CBSE 2026Set ANNUAL1 markMCQQ.The range of f(x)=x2+3 for x∈R is(a) [3,∞)(b) (−∞,3](c) (3,∞)(d) (−∞,3)∪(3,∞)
›Reveal solutionSolution
The minimum value of x2 over all reals is 0 (at x=0), so the minimum of f(x)=x2+3 is 3; f can take any value from 3 upward.
For f(x)=x2+3 with x∈R: since the square of any real number is never negative, x2≥0 for all x. Adding 3 to both sides, f(x)=x2+3≥3. The minimum value 3 is attained at x=0, and as ∣x∣ grows without bound, f(x) increases without bound. So f(x) takes every value in [3,∞) and no value below 3 — this is the range.
✓Final answer(a) [3,∞).
- CBSE 2025Set ANNUAL1 markMCQQ.Range of the modulus function f(x)=∣x∣ is(a) Range(f)=[0,∞)(b) Range(f)=(0,∞)(c) Range(f)=(−∞,∞)(d) None of these
›Reveal solutionSolution
∣x∣≥0 for every real x, and every value y≥0 is achieved (e.g. by x=y), so the range is [0,∞).
The modulus function is defined as:
f(x)=∣x∣={x,−x,x≥0x<0
In both cases the output is non-negative, so f(x)≥0 always -- the value 0 is included (at x=0), and it's a closed lower bound, so the interval starts with a square bracket: [0,∞).
There is no upper bound since ∣x∣ can be made arbitrarily large.
✓Final answer(a) Range(f)=[0,∞)
- CBSE 2025Set sz1 markMCQQ.The domain of the function f:R→R given by f(x)=x2−4 is :(a) [0, 4](b) [-2, 2](c) (-2, 2)(d) (4, 0)
›Reveal solutionSolution
The literal stem f(x)=x2−4 has domain (−∞,−2]∪[2,∞), which is not one of the four choices — the choices match f(x)=4−x2 instead, so that is very likely the intended function, giving domain [−2,2].
Working the literal stem first, honestly: for f(x)=x2−4 to be real-valued we need the expression under the root to be non-negative:
x2−4≥0⟹x2≥4⟹x≤−2 or x≥2.
So the true domain of the function exactly as printed is (−∞,−2]∪[2,∞) — and none of options (a) [0,4], (b) [-2,2], (c) (-2,2), (d) (4,0) equal this set.
Because every one of the four options is a bounded interval centred on 0 (or close to it), and option (b) is exactly the domain of the closely related function f(x)=4−x2 (a very standard NCERT domain example), the most reasonable reading is that the paper has a sign slip and intended 4−x2 under the root, not x2−4.
For f(x)=4−x2: need 4−x2≥0⟹x2≤4⟹−2≤x≤2, i.e. domain [−2,2].
✓Final answerAs literally printed, no option is correct (true domain is (−∞,−2]∪[2,∞)). Reconciled against the printed choices, the intended function is f(x)=4−x2 with domain [−2,2] — option (b).
- CBSE 2024Set hz1 markMCQQ.Range of the function f:R→R given by f(x)=∣x−1∣ is:(a) (−∞,∞)(b) (−∞,0](c) [0,∞)(d) None of these
›Reveal solutionSolution
f(x)=∣x−1∣ can never be negative and attains every non-negative value, so its range is [0,∞).
For f:R→R, f(x)=∣x−1∣.
By definition, the absolute value ∣x−1∣≥0 for every real x, so f(x) can never be negative.
As x varies over all of R: when x=1, f(x)=0 (the minimum value); as x→±∞, f(x)→∞. Since ∣x−1∣ is continuous and takes every value between 0 and ∞ (e.g. f(1+k)=k for any k≥0), the range is exactly [0,∞).
✓Final answerThe correct option is (C) [0,∞).
- CBSE 2023Set annual1 markMCQQ.Domain of the function f(x)=9−x2 is:(a) (−3,3)(b) (−3,0)(c) (0,3)(d) [−3,3]
›Reveal solutionSolution
The expression under a square root must be non-negative, giving the domain [−3,3].
For f(x)=9−x2 to give a real value, the radicand must satisfy
9−x2≥0⟹x2≤9⟹−3≤x≤3.
So the domain is the closed interval [−3,3] (both endpoints included, since 9−x2=0 is allowed).
✓Final answerThe correct option is (D) [−3,3].
- CBSE 2022Set ANNUAL1 markMCQQ.If f(x) = 1/(1-x^2), then the domain of f(x) is –(i) R(ii) R - {-1, 1}(iii) {-1, 1}(iv) R - {1}
›Reveal solutionSolution
f(x) is undefined wherever the denominator 1 − x² = 0, so those points are excluded from the domain.
For f(x)=1/(1−x2) to be defined we need the denominator to be non-zero:
1−x2=0⇒x2=1⇒x=1 and x=−1
So f(x) is defined for every real number except x = 1 and x = −1.
✓Final answerDomain of f = R − {−1, 1} (option ii).
- CBSE 2018Set ANNUAL1 markMCQQ.The domain of the function f(x)=∣x∣x is(a) R−{0}(b) R(c) Z(d) W
›Reveal solutionSolution
The function is defined exactly where its denominator ∣x∣ is nonzero.
f(x)=∣x∣x requires ∣x∣=0, i.e. x=0.
So the domain is all real numbers except 0.
✓Final answerDomain =R−{0}, option (a).
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.