Q.If a=i^+j^+2k^ and b=2i^+j^−2k^, find the unit vector in the direction of
Concept understanding — Unit Vector Scaling
Unit Vector Scaling: From Intuition to Precision
Imagine you're drawing an arrow on graph paper. It has a direction and a length. Now suppose you want to keep the direction exactly the same, but make the arrow exactly one unit long. That's the core idea of unit vector scaling: take any vector and shrink or stretch it so its length becomes 1, without changing where it points.
The Intuition First
Think of a vector as a "directed step." A step of 3 metres north-east is a vector of length 3 in the north-east direction. To get a unit vector in the same direction, you'd take a step of exactly 1 metre north-east — scaling the original down by a factor of 3.
The key insight: direction is independent of length. A vector pointing north-east at length 5 and one at length 1 share the same direction. Unit vector scaling isolates that direction by forcing the length to be exactly 1.
The Precise Statement
v^=∥v∥v
Here v is any non-zero vector, ∥v∥ is its magnitude, and v^ ("v-hat") is the unit vector in the same direction. The operation: divide each component by the vector's length.
Example in 2D
Take v=(3,4). Its length is:
∥v∥=32+42=25=5
The unit vector is v^=(53,54).
Check: (3/5)2+(4/5)2=25/25=1. Direction unchanged — the ratio 3:4 is preserved.
Example in 3D
For v=(2,−1,2):
∥v∥=22+(−1)2+22=9=3
v^=(32,−31,32)
Why This Matters
Unit vectors are the building blocks of direction. In physics they represent pure directions for forces, velocities, or fields; in computer graphics, camera orientations and light directions. In mathematics they simplify dot products and projections — the dot product of a unit vector with another vector directly gives the component of that vector along the unit vector's direction.
You cannot scale the zero vector to a unit vector — division by zero is undefined. The zero vector has no direction to preserve.
The One-Line Summary
Unit vector scaling takes any non-zero vector and divides it by its own length, producing a vector of length 1 that points exactly where the original pointed.
Normalising a vector into a unit vector is a routine computation throughout the NCERT Class 12 Vector Algebra chapter and appears constantly in CBSE board numericals and JEE Main problems. "Unit vector formula class 12 with examples" is a common search among students building up to direction-cosine and dot-product questions.
A unit vector in the direction of v is ∣v∣v. Note 6b points the same way as b.
a=i^+j^+2k^, b=2i^+j^−2k^.
(i) 6b=12i^+6j^−12k^, ∣6b∣=144+36+144=18.
Unit vector =1812i^+6j^−12k^=31(2i^+j^−2k^).
(ii) 2a−b=(2−2)i^+(2−1)j^+(4+2)k^=j^+6k^, ∣2a−b∣=0+1+36=37.
Unit vector =37j^+6k^.
- 31(2i^+j^−2k^);
- 371(j^+6k^)
6b has the same direction as b, giving unit vector 31(2i^+j^−2k^); and 2a−b=j^+6k^ gives unit vector 371(j^+6k^).
The idea
A unit vector in the direction of a non-zero vector v is v^=∣v∣v. Multiplying a vector by a positive scalar (like 6) does not change its direction, only its length — so 6b and b share the same unit vector.
Part (i): direction of 6b
6b=6(2i^+j^−2k^)=12i^+6j^−12k^
∣6b∣=122+62+(−12)2=144+36+144=324=18
6b=1812i^+6j^−12k^=31(2i^+j^−2k^)
Part (ii): direction of 2a−b
2a=2i^+2j^+4k^
2a−b=(2−2)i^+(2−1)j^+(4−(−2))k^=0i^+j^+6k^
Mind the sign on the k^ term: 4−(−2)=6.
∣2a−b∣=02+12+62=37
unit=37j^+6k^
- 31(2i^+j^−2k^);
- 371(j^+6k^)
Method: Unit vectors of scaled and combined vectors
Use this for "find the unit vector in the direction of kb / ma+nb" type parts.
Steps
Step 1: Exploit that a positive scalar does not change direction.
A vector like 6b points the same way as b, so it has the same unit vector as b — you may normalise b directly and skip multiplying by 6. This shortcut applies only to a single positive multiple, not to a genuine combination.
Step 2: Form each target vector by component arithmetic, watching signs.
For a combination such as 2a−b, compute component by component and be careful subtracting a negative coordinate (e.g. 4−(−2)=6).
Step 3: Divide each target vector by its own magnitude.
v^=∣v∣v.
Common Mistakes
Mistake 1: Computing the unit vector of 6b as ∣b∣6b.
Why it's wrong: you must divide by the magnitude of the same vector, ∣6b∣=6∣b∣=18; dividing by ∣b∣ leaves a length-6 vector. Correct approach: divide 6b by ∣6b∣ — or just note 6b shares b's unit vector.
Mistake 2: Sign slip in 2a−b on the k^ term.
Why it's wrong: 4−(−2)=6, not 2; subtracting a negative adds. Correct approach: substitute the sign explicitly before subtracting.
Mistake 3: Writing j^+6k^ as the final answer for part (ii).
Why it's wrong: that is the direction vector, not yet a unit vector. Correct approach: divide by ∣2a−b∣=37.
- AP EAPCET 2025Set eng-2025-05-23-AN1 markMCQQ.If aˉ=2iˉ−3jˉ+5kˉ and bˉ=−iˉ+3jˉ+3kˉ are two vectors, then the vector of magnitude 28 units in the direction of the vector aˉ−bˉ is (A) 3iˉ+6jˉ−2kˉ (B) 12iˉ−24jˉ+8kˉ (C) 3iˉ−6jˉ−2kˉ (D) 12iˉ+24jˉ−8kˉ
›Reveal solutionSolution
Compute aˉ−bˉ, normalize it, then scale to magnitude 28; the answer is 12iˉ−24jˉ+8kˉ.
Concept and Intuition
Any vector of a required magnitude m in the direction of a vector vˉ is m⋅∣vˉ∣vˉ — scale the unit vector along vˉ by m.
Step-by-Step Solution
- aˉ−bˉ=(2−(−1))iˉ+(−3−3)jˉ+(5−3)kˉ=3iˉ−6jˉ+2kˉ.
- ∣aˉ−bˉ∣=32+(−6)2+22=9+36+4=49=7.
- Unit vector along aˉ−bˉ: 71(3iˉ−6jˉ+2kˉ).
- Required vector of magnitude 28: 28×71(3iˉ−6jˉ+2kˉ)=4(3iˉ−6jˉ+2kˉ)=12iˉ−24jˉ+8kˉ.
Common Mistakes
- Computing bˉ−aˉ instead of aˉ−bˉ, which flips every sign.
- Forgetting to divide by the magnitude before rescaling.
✓Final answerThe correct option is (B) — 12iˉ−24jˉ+8kˉ.
ANSWER: B
- AP EAPCET 2025Set eng-2025-05-24-FN1 markMCQQ.If the vectors 2iˉ+4jˉ−3kˉ, −iˉ+2jˉ+3kˉ and piˉ−2jˉ+kˉ are coplanar, then the unit vector in the direction of the vector 9piˉ−4jˉ+4kˉ is (A) 61(2iˉ−4jˉ+4kˉ) (B) 571(5iˉ−4jˉ+4kˉ) (C) 681(6iˉ−4jˉ+4kˉ) (D) 91(−7iˉ−4jˉ+4kˉ)
›Reveal solutionSolution
Tests the coplanarity condition (scalar triple product = 0) followed by unit-vector normalization; the answer is (D).
Concept and Intuition
Three vectors uˉ,vˉ,wˉ are coplanar exactly when their scalar triple product [uˉ vˉ wˉ]=uˉ⋅(vˉ×wˉ) vanishes — equivalently, the determinant formed from their rectangular components is zero. This is because a nonzero triple product measures the (signed) volume of the parallelepiped spanned by the three vectors; coplanar vectors span zero volume.
Step-by-Step Solution
- Write the determinant condition for uˉ=2iˉ+4jˉ−3kˉ, vˉ=−iˉ+2jˉ+3kˉ, wˉ=piˉ−2jˉ+kˉ:
2−1p42−2−331=0
- Expand along the first row: 2(2⋅1−3⋅(−2))−4((−1)⋅1−3p)+(−3)((−1)(−2)−2p) =2(8)−4(−1−3p)−3(2−2p)=16+4+12p−6+6p=14+18p.
- Set 14+18p=0⇒p=−1814=−97.
- Compute the target vector: 9piˉ−4jˉ+4kˉ=9(−97)iˉ−4jˉ+4kˉ=−7iˉ−4jˉ+4kˉ.
- Its magnitude: (−7)2+(−4)2+42=49+16+16=81=9.
- Unit vector =91(−7iˉ−4jˉ+4kˉ).
Common Mistakes
- Forgetting to substitute p back into the target vector expression 9piˉ−4jˉ+4kˉ (using the original piˉ−2jˉ+kˉ instead).
- Sign errors in the cofactor expansion of the 3×3 determinant.
✓Final answerThe correct option is (D) — 91(−7iˉ−4jˉ+4kˉ).
ANSWER: D
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.