Q.A small candle, 2.5 cm in size is placed at 27 cm in front of a concave mirror of radius of curvature 36 cm. At what distance from the mirror should a screen be placed in order to obtain a sharp image? Describe the nature and size of the image. If the candle is moved closer to the mirror, how would the screen have to be moved?
Concept understanding — Spherical Mirror Equation
The Spherical Mirror Equation: From Intuition to Formula
Imagine you're standing in front of a concave mirror — the kind that makes your face look bigger when you're close, but flips everything upside down when you step far back. That change isn't magic; it's geometry. The spherical mirror equation is the single relationship that predicts exactly where an image will form, and whether it's real or virtual, for any spherical mirror.
The Core Idea
Every point on an object sends out light rays in all directions. A mirror redirects those rays. The mirror equation tells you: given the mirror's curvature and the object's distance, where will those rays meet again (or appear to meet)?
There are only three quantities you need:
- u — object distance (from the mirror's pole)
- v — image distance (from the mirror's pole)
- f — focal length (a property of the mirror's curvature)
The equation is:
v1+u1=f1
The power is in the sign convention, because every distance can point in one of two directions.
The Sign Convention (New Cartesian Sign Convention)
This is where most students slip. The equation works for all spherical mirrors — concave and convex — only if you follow the convention used throughout NCERT and CBSE:
- All distances are measured from the mirror's pole.
- The incident light is taken to travel left to right, so distances measured in that same direction (to the right) are positive, and distances measured against it (to the left) are negative.
- Heights above the principal axis are positive; heights below are negative.
Because a real object is always placed in front of the mirror (to the left, where the incident light originates), its distance u is always negative.
Under this convention, the focal length of a concave mirror is negative (its focus F sits in front of the mirror, on the same side as the object), and the focal length of a convex mirror is positive (its focus lies behind the mirror). This is one of the most frequently tested facts in CBSE board exams.
A very common mistake is writing f as positive for a concave mirror because "it converges light." Convergence tells you the type of mirror, not the sign — the sign comes purely from where the focus physically sits relative to the pole, under the convention above.
Where Does the Formula Come From?
For a concave mirror, parallel rays from a distant object converge at the focus, a point at (signed) distance f from the mirror. The derivation uses similar triangles from a ray diagram.
›Proof
Consider an object of height ho in front of a concave mirror. Draw the ray parallel to the axis: it reflects through the focus F. Draw the ray through the centre of curvature C: it strikes the mirror normally and reflects straight back on itself. These two reflected rays cross to form the image, of height hi.
From similar triangles formed by the ray through C:
hiho=R−vu−R
where R=2f is the radius of curvature (with the same sign convention as f).
From similar triangles formed by the ray through F:
hiho=fu−f
Equating the two ratios and simplifying (using R=2f) gives:
v1+u1=f1
What the Equation Tells You
Rearranging for v:
v=u−fuf
Because u is negative for a real object, and v takes the sign the geometry dictates:
- v negative → the image forms in front of the mirror → real image (can be projected on a screen).
- v positive → the image forms behind the mirror → virtual image.
For a concave mirror (f negative), using the magnitude of the object distance ∣u∣ measured from the pole:
- ∣u∣>2∣f∣ → real, inverted, diminished image between f and 2f
- ∣u∣=2∣f∣ → real, inverted, same-size image at 2f
- ∣f∣<∣u∣<2∣f∣ → real, inverted, magnified image beyond 2f
- ∣u∣=∣f∣ → image at infinity
- ∣u∣<∣f∣ → virtual, erect, magnified image behind the mirror (the "shaving mirror" case)
For a convex mirror (f positive), any real object gives a virtual, erect, diminished image behind the mirror — the familiar "rear-view mirror" case.
The Magnification Link
m=hohi=−uv
A negative m means the image is inverted relative to the object; a positive m means it is erect.
A Worked Example
A concave mirror has focal length of magnitude 20 cm, so f=−20 cm. An object is placed 30 cm in front, so u=−30 cm.
v1=f1−u1=−201−−301=−201+301=60−3+2=−601
v=−60 cm
v is negative, so the image is real, 60 cm in front of the mirror. Magnification: m=−v/u=−(−60)/(−30)=−2 — the image is twice the object's size and inverted, matching the ∣f∣<∣u∣<2∣f∣ case above.
The Big Picture
The spherical mirror equation is one instance of a pattern that recurs across optics: the lens formula, the refraction-at-a-spherical-surface formula, and even more advanced optical-system equations share the same reciprocal-distance structure. Master the mirror equation together with its sign convention, and the rest of ray optics — telescopes, microscopes, your own eye — follows the same logic.
The spherical mirror equation, 1/v + 1/u = 1/f, together with the Cartesian sign convention, is one of the most heavily tested formulas in the NCERT Class 12 Physics chapter on ray optics, appearing in nearly every CBSE board paper and in JEE Main/NEET. Searches for "mirror formula sign convention numericals class 12 physics" will find this concave-versus-convex-mirror derivation matches the NCERT textbook precisely.
Why this formula?
Spherical Mirror Equation: Why the Formula Holds
The spherical mirror equation — also called the mirror formula — relates the object distance (u), image distance (v), and focal length (f) of a spherical mirror. Let's build the reasoning step by step.
1. The Key Formula
For a spherical mirror (concave or convex):
f1=u1+v1
Where:
- f = focal length (positive for concave, negative for convex)
- u = object distance from pole (always negative by sign convention)
- v = image distance from pole (sign depends on image location)
2. Why This Formula Holds — The Derivation
Step 1: Start with a ray diagram
Consider a concave mirror with:
- Pole P
- Centre of curvature C (radius R)
- Focus F (midpoint of PC, so f=R/2)
Take an object placed beyond C. Draw two rays from the object's tip:
- A ray parallel to the principal axis → reflects through F
- A ray through C → reflects back along itself
These rays meet at the image point.
Step 2: Use similar triangles
Let the object height be ho and image height be hi.
From the geometry of the ray through C:
- Triangle formed by object, C, and axis is similar to triangle formed by image, C, and axis.
This gives:
hiho=R−vu−R
(Here u and v are distances from P, with sign conventions applied later.)
Step 3: Use the parallel ray
From the ray parallel to the axis:
- Triangle formed by object, F, and axis is similar to triangle formed by image, F, and axis.
This gives:
hiho=fu−f
Step 4: Equate the two ratios
Since both ratios equal ho/hi:
R−vu−R=fu−f
Step 5: Substitute R=2f
For a spherical mirror, the focal length is half the radius of curvature:
R=2f
Substitute:
2f−vu−2f=fu−f
Step 6: Cross-multiply and simplify
Cross-multiply:
f(u−2f)=(u−f)(2f−v)
Expand:
fu−2f2=2fu−uv−2f2+fv
Cancel −2f2 on both sides:
fu=2fu−uv+fv
Bring all terms to one side:
0=fu−uv+fv
Rearrange:
uv=fu+fv
Step 7: Divide by uvf
Divide both sides by uvf:
f1=v1+u1
This is the mirror formula.
3. Why the Sign Convention Matters
The derivation above used distances as positive magnitudes. In actual problem-solving, we use the Cartesian sign convention:
- Distances measured against incident light are negative
- Distances measured along incident light are positive
For a concave mirror:
- u is negative (object in front)
- f is negative (focus in front)
- v is negative for real images (in front)
The formula f1=u1+v1 remains valid with these signed values.
4. Key Insight — Why It's Not Just a Formula
The mirror equation is not an arbitrary rule. It emerges from:
- Geometry (similar triangles from ray paths)
- Physics (law of reflection: angle of incidence = angle of reflection)
- Approximation (paraxial rays — rays close to the axis, so sinθ≈θ)
For rays far from the axis (marginal rays), spherical mirrors show spherical aberration — the formula breaks down.
5. Quick Summary
| Step | What we did |
|---|---|
| Drew two special rays | Parallel ray → through F; Ray through C → reflects back |
| Used similar triangles | Two pairs of similar triangles from geometry |
| Equated height ratios | ho/hi from both pairs |
| Substituted R=2f | Key relation for spherical mirrors |
| Simplified algebra | Cross-multiplied, cancelled, rearranged |
| Divided by uvf | Got f1=u1+v1 |
Bottom line: The mirror formula is a direct consequence of the law of reflection applied to a spherical surface, under the paraxial approximation. It's geometry + physics, not magic.
Concept: Reflection by a spherical mirror — use the mirror formula and magnification relation.
Step 1 — Find focal length.
For a concave mirror, f=2R=236=18 cm.
Object distance u=−27 cm (sign convention: object in front).
Step 2 — Apply mirror formula.
v1+u1=f1
v1+−271=−181
v1=−181+271=54−3+2=−541
Thus v=−54 cm. The negative sign means the image is real and on the same side as the object.
Step 3 — Magnification and image size.
m=−uv=−−27−54=−2
Image height hi=m×ho=−2×2.5=−5 cm.
Negative m means inverted; ∣m∣>1 means enlarged.
Step 4 — Effect of moving candle closer.
If the candle is moved closer (i.e., ∣u∣ decreases), v becomes more negative (image moves farther behind the mirror). Since the image is real, the screen must be moved away from the mirror to keep the image sharp.
The screen should be placed at 54 cm in front of the mirror; the image is real, inverted, and 5 cm tall. Moving the candle closer requires moving the screen farther away.
Using the mirror formula f1=u1+v1 with f=−18 cm (concave mirror) and u=−27 cm, we find v=−54 cm. The screen must be placed 54 cm in front of the mirror. The image is real, inverted, and 5.0 cm tall. Moving the candle closer requires moving the screen away from the mirror until the object reaches the focal point.
1. Understanding the physics: Why the mirror formula works
A concave mirror converges light. When an object is placed beyond the centre of curvature (C), the image forms between C and F — real and inverted. When the object is between F and the pole, the image is virtual and erect. The mirror formula ties object distance u, image distance v, and focal length f:
f1=u1+v1
Sign convention (Cartesian): distances measured from the pole. For a concave mirror, f is negative, u is negative (object in front), and v is negative for a real image (in front of the mirror).
2. Step-by-step solution
Step 1: Find the focal length.
Radius of curvature R=36 cm. For any spherical mirror, f=R/2.
f=236=18 cm
Since it's concave, f=−18 cm.
Step 2: Write the object distance.
Object is placed 27 cm in front of the mirror.
u=−27 cm
Step 3: Apply the mirror formula.
v1=f1−u1=−181−−271=−181+271
Find a common denominator (LCM = 54):
−543+542=−541
Thus:
v=−54 cm
A common mistake is forgetting the negative signs. If you plug u=27 and f=18 without signs, you get v=54 cm — but that would be for a convex mirror. Always apply the sign convention.
Step 4: Interpret v.
The negative sign means the image is formed in front of the mirror — real and inverted. The screen must be placed 54 cm from the mirror on the same side as the object.
Step 5: Find the magnification and image size.
Magnification m=−uv:
m=−(−27)(−54)=−2754=−2
The negative sign indicates inversion. Image height hi=m×ho:
hi=(−2)×2.5 cm=−5.0 cm
The magnitude 5.0 cm tells the size; the negative sign confirms inversion.
Magnification ∣m∣>1 means the image is enlarged. Here ∣m∣=2, so the image is twice the object size.
Step 6: Describe the image.
- Real (can be projected on a screen)
- Inverted (upside down)
- Magnified (5.0 cm tall)
- Formed 54 cm in front of the mirror
Step 7: What happens when the candle is moved closer?
If the object moves toward the mirror (i.e., ∣u∣ decreases), the image distance v changes. Let's examine two cases:
- Object beyond C (∣u∣>36 cm): Image between C and F, real and smaller.
- Object between C and F (18<∣u∣<36): Image beyond C, real and enlarged.
- Object at F (∣u∣=18 cm): Image at infinity — no sharp image on any screen.
- Object between F and pole (∣u∣<18 cm): Image virtual, behind the mirror — cannot be caught on a screen.
In our problem, the candle is at 27 cm (between C and F). Moving it closer to the mirror means ∣u∣ decreases from 27 toward 18 cm. From the mirror formula:
v1=f1−u1
As ∣u∣ decreases, ∣u∣1 increases, so v1 becomes more negative — meaning ∣v∣ increases. The screen must be moved farther away from the mirror.
When the candle reaches 18 cm (the focal point), v→∞ — no image on any screen. Beyond that, the image becomes virtual and the screen is useless.
For a concave mirror, as the object moves from infinity toward the focus, the real image moves from the focus toward infinity. The screen must be moved away from the mirror to keep the image sharp — until the object reaches the focus, after which no real image forms.
The screen must be placed 54 cm in front of the concave mirror to obtain a sharp, real, inverted image of size 5.0 cm. If the candle is moved closer to the mirror, the screen must be moved farther away until the candle reaches the focal point, beyond which no real image is formed.
Method: Mirror Formula and Magnification Approach
This problem uses the Mirror Formula combined with Magnification relations — the standard method for all spherical mirror image-location problems in ray optics.
Step 1: Identify given data and sign convention
Sign convention: Cartesian sign convention (all distances measured from pole, direction of incident light is positive).
- Object size, ho=+2.5 cm
- Object distance, u=−27 cm (negative: object is in front of mirror)
- Radius of curvature, R=−36 cm (negative for concave mirror)
Step 2: Find focal length
For a spherical mirror:
f=2R
f=2−36=−18 cm
Step 3: Apply mirror formula to find image distance
Mirror formula:
v1+u1=f1
Substitute u=−27 cm, f=−18 cm:
v1+−271=−181
v1−271=−181
v1=−181+271
Take LCM (54):
v1=54−3+2=−541
v=−54 cm
Screen should be placed 54 cm in front of the mirror.
Step 4: Find magnification and image size
Magnification:
m=−uv=−(−27)(−54)=−2754=−2
Image size:
hi=m×ho=(−2)×(2.5)=−5 cm
Step 5: Describe the nature of the image
- Real (since v is negative, image is in front of mirror)
- Inverted (since m is negative)
- Magnified (since ∣m∣>1)
- Size: 5 cm (inverted)
Step 6: Effect of moving candle closer
If the candle is moved closer to the mirror (i.e., ∣u∣ decreases):
- For a concave mirror, as object moves from beyond C toward F, the image moves farther away from the mirror (beyond C).
- The screen must be moved away from the mirror to capture the sharp image.
Rule: For a concave mirror, object moving toward mirror → image moves away from mirror (until object reaches focus, after which image becomes virtual).
Final Answer Summary
| Quantity | Value |
|---|---|
| Screen distance | 54 cm in front of mirror |
| Image nature | Real, inverted, magnified |
| Image size | 5 cm |
| If candle moves closer | Move screen away from mirror |
Here are the common mistakes students make with this exact problem, and how to avoid each one.
1. Confusing Radius of Curvature (R) with Focal Length (f)
The Mistake:
Students plug R=36 cm directly into the mirror formula as f.
Why it’s wrong:
For a spherical mirror, the focal length is half the radius of curvature:
f=2R
How to avoid:
Always write the relation first:
f=2R=236=18 cm
Then use f=−18 cm (concave mirror → negative focal length as per Cartesian sign convention).
2. Forgetting the Sign Convention (Cartesian)
The Mistake:
Using u=27 cm as positive, or treating f as positive.
Why it’s wrong:
In the Cartesian sign convention:
- Distances measured against the incident light direction are negative.
- For a concave mirror, both u and f are negative.
How to avoid:
Always draw a quick ray diagram and label directions. Then:
u=−27 cm,f=−18 cm
3. Using the Lens Formula Instead of the Mirror Formula
The Mistake:
Writing f1=v1−u1 (lens formula) instead of the mirror formula.
Why it’s wrong:
The mirror formula is:
f1=v1+u1
How to avoid:
Memorise separately:
- Mirror: f1=v1+u1
- Lens: f1=v1−u1
Write the correct one before substituting.
4. Sign Error When Solving for v
The Mistake:
After substituting u=−27 and f=−18, students get the algebra wrong and end up with v positive when it should be negative (or vice versa).
How to avoid:
Do the algebra step-by-step:
v1=f1−u1=−181−−271=−181+271
Find LCM = 54:
v1=54−3+2=−541
Thus:
v=−54 cm
Check: Negative v means the image is in front of the mirror (real image), which matches the problem’s requirement for a screen.
5. Misinterpreting Magnification Sign
The Mistake:
Using m=uv without signs, or forgetting that m negative means inverted image.
How to avoid:
Use the signed formula:
m=−uv=−(−27)(−54)=−2754=−2
- Negative m → image is inverted.
- ∣m∣=2 → image is magnified (twice the object size).
6. Calculating Image Size Incorrectly
The Mistake:
Using hi=m×ho but forgetting the sign of m or ho.
How to avoid:
Object size ho=+2.5 cm (always positive). Then:
hi=m×ho=(−2)×(2.5)=−5.0 cm
- ∣hi∣=5.0 cm → size.
- Negative sign → image is inverted relative to object.
7. Describing the Image Incorrectly
The Mistake:
Saying “real, inverted, diminished” when it’s actually magnified.
How to avoid:
Check ∣m∣:
- ∣m∣>1 → magnified
- ∣m∣<1 → diminished
- ∣m∣=1 → same size
Here ∣m∣=2, so the image is real, inverted, and magnified.
8. Answering the “Move the Screen” Part Wrong
The Mistake:
Saying “move the screen away” when the candle is moved closer, without checking the new u.
How to avoid:
If the candle is moved closer (say u becomes less negative, e.g., −20 cm), recalculate v:
v1=−181−−201=−181+201=180−10+9=−1801
So v=−180 cm — farther from the mirror.
Key rule: For a concave mirror, as the object moves from infinity toward the focus, the image moves away from the mirror (from focus to infinity). So the screen must be moved farther from the mirror.
Quick Summary Checklist
| Step | Common Mistake | Correct Approach |
|---|---|---|
| f | Use R directly | f=R/2=−18 cm |
| Signs | u positive | u=−27 cm |
| Formula | Lens formula | f1=v1+u1 |
| v | Algebra slip | Solve stepwise → v=−54 cm |
| m | Forget sign | m=−v/u=−2 |
| hi | Wrong sign | hi=m×ho=−5.0 cm |
| Nature | Wrong description | Real, inverted, magnified |
| Screen move | Wrong direction | Move away from mirror |
Final Answer for the problem:
- Screen distance: 54 cm in front of the mirror
- Image: real, inverted, 5.0 cm tall
- If candle is moved closer: move screen farther from the mirror
- CBSE 2026Set ANNUAL1 markMCQQ.A 4.5 cm needle is placed 12 cm away from a convex mirror of focal length 15 cm. The location of the image is(a) formed at 6.67 cm behind the mirror.(b) formed at 67 cm behind the mirror.(c) formed at 70 cm same side of the mirror.(d) formed at 5.57 cm same side of the mirror.
›Reveal solutionSolution
Using the mirror formula with the correct sign convention, the convex mirror forms a virtual image 6.67 cm behind the mirror.
Given: Needle height h=4.5 cm, object distance u=−12 cm (object in front, so negative by convention), convex mirror so focal length f=+15 cm (behind the mirror, positive).
Mirror formula:
v1+u1=f1
v1=f1−u1=151−−121=151+121
Taking LCM (60): v1=604+605=609=203
v=320=6.67 cm
Since v is positive, the image is formed BEHIND the mirror (virtual), as expected for a convex mirror with a real object — convex mirrors always give a virtual, erect, diminished image for real objects.
✓Final answer(a) The image is formed at 6.67 cm behind the mirror.
- CBSE 2025Set 55/4/11 markMCQQ.The magnification produced by a spherical mirror is −2.0. The mirror used and the nature of the image formed will be: (A) Convex and virtual (B) Concave and real (C) Concave and virtual (D) Convex and real
›Reveal solutionSolution
A magnification of −2.0 means the image is inverted (negative sign) and magnified (magnitude > 1). Only a concave mirror can produce an inverted, magnified image, and such an image is always real. So the mirror is concave and the image is real — option (B).
Concept and Intuition
The magnification m of a spherical mirror tells you two things at once: the sign tells you orientation, and the magnitude tells you size.
- If m is positive, the image is virtual and erect (upright).
- If m is negative, the image is real and inverted (upside down).
The magnitude ∣m∣ tells you relative size:
- ∣m∣>1 → image is magnified (larger than object)
- ∣m∣<1 → image is diminished (smaller)
- ∣m∣=1 → same size
Here m=−2.0 means the image is inverted (negative) and twice as large as the object (∣m∣=2).
Now, which mirror can produce an inverted, magnified image? A convex mirror always gives a virtual, erect, and diminished image — so it can never produce a negative magnification. A concave mirror, however, can produce both real (inverted) and virtual (erect) images depending on where the object is placed. The real image from a concave mirror is always inverted, and when the object is between the centre of curvature and the focus, that real image is also magnified.
So the only mirror that fits m=−2.0 is a concave mirror, and the image must be real.
Step-by-step reasoning
-
Interpret the sign of m
m=−2.0 is negative. For spherical mirrors, a negative magnification always means the image is inverted relative to the object. An inverted image formed by a single mirror is always real (it can be projected on a screen). So the image is real.
-
Interpret the magnitude of m
∣m∣=2.0>1, so the image is magnified — larger than the object.
-
Eliminate convex mirror
A convex mirror always produces a virtual, erect, and diminished image for any real object. That means m is always positive and ∣m∣<1. Since our m is negative and ∣m∣>1, a convex mirror is impossible. This eliminates options (A) and (D).
-
Check concave mirror possibilities
A concave mirror can produce:
- A real, inverted, magnified image when the object is placed between F and C (focus and centre of curvature).
- A virtual, erect, magnified image when the object is placed between P and F (pole and focus). In that case m is positive.
Since our m is negative, the image cannot be virtual. So the only possibility is the real, inverted, magnified case — which is exactly what a concave mirror gives for an object between F and C.
-
Confirm the mirror type
Only a concave mirror can produce a real, inverted, magnified image. Therefore the mirror is concave and the image is real.
Watch outA common mistake is to think that a negative magnification always means a concave mirror — but a convex mirror can never give a negative m at all. Also, don't confuse "magnified" with "virtual": a concave mirror gives a magnified virtual image only when the object is very close (between pole and focus), and that image is erect (positive m). So m=−2.0 cannot be virtual.
TipYou can remember the four cases for concave mirrors with a simple table:
| Object position | Image type | m sign | ∣m∣ |
|----------------|------------|----------|-------|
| Beyond C | Real, inverted, diminished | negative | <1 |
| At C | Real, inverted, same size | negative | =1 |
| Between C and F | Real, inverted, magnified | negative | >1 |
| Between F and P | Virtual, erect, magnified | positive | >1 |
Our m=−2.0 fits the third row perfectly.
✓Final answerThe mirror is concave and the image is real, so the correct option is (B).
- CBSE 2025Set IMPROVEMENT1 markMCQQ.Assertion (A): The radius of curvature of a concave mirror is 20 cm. If an object is placed in front of the mirror at a distance of 10 cm from its pole, its image is formed at infinity. Reason (R): The image of an object placed at the focus of a spherical mirror is formed at infinity. Select the correct option.(a) Both A and R are correct and R is the correct explanation of A.(b) Both A and R are correct but R is not the correct explanation of A.(c) A is correct but R is incorrect.(d) Both A and R are incorrect.
›Reveal solutionSolution
Both statements are true, and the reason correctly explains why the assertion is true.
For a concave mirror of radius of curvature R=20cm, the focal length is f=R/2=10cm. In Assertion (A), the object is placed at a distance of 10 cm from the pole — exactly at the focus. Using the mirror formula v1+u1=f1, when u=f, we get v1=f1−f1=0, so v→∞ — the image is indeed formed at infinity. This is exactly the general principle stated in Reason (R): rays from an object placed at the focus of a spherical mirror emerge parallel after reflection and meet only at infinity. So R is a true, general statement, and it directly and correctly explains why A is true.
✓Final answer(a) Both A and R are correct and R is the correct explanation of A.
- CBSE 2024Set ANNUAL1 markMCQQ.Focal length of a concave mirror in air is 25 cm. Its focal length in water will be -(a) 50 cm(b) 12.5 cm(c) ∞(d) 25 cm
›Reveal solutionSolution
A mirror's focal length depends only on its radius of curvature, not on the surrounding medium.
For a spherical mirror, f=R/2, where R is the radius of curvature -- a purely geometrical quantity. Since reflection (unlike refraction) does not depend on the refractive index of the surrounding medium, the focal length of a mirror does not change when it is placed in a different medium such as water. So the focal length remains 25 cm.
✓Final answer(d) 25 cm
- CBSE 2024Set A1 markMCQQ.The correct relationship between the radius of curvature (R) and focal length(f) of a spherical mirror is ______.(a) R = 2f(b) f = 2R(c) R = f/2(d) R = 1/f
›Reveal solutionSolution
For a spherical mirror, R = 2f because the focal point lies midway between the pole and the centre of curvature.
For a spherical mirror (concave or convex), a ray parallel to the principal axis, after reflection, passes through (or appears to diverge from) the focus F. Using the mirror geometry, for paraxial rays, the focal length f is related to the radius of curvature R by:
f=2R⇒R=2f
This is because the focus F lies exactly midway between the pole (P) of the mirror and the centre of curvature (C).
✓Final answer(a) R = 2f.
- CBSE 2024Set ANNUAL1 markQ.The radius of curvature of a concave mirror is 24 cm. The value of its focal length will be __________ cm.
›Reveal solutionSolution
For a spherical mirror, f = R/2, a direct geometric consequence of paraxial ray reflection.
For any spherical mirror (concave or convex), the focal length is related to the radius of curvature by:
f=2R
Given R=24 cm:
f=224=12 cm
✓Final answer12 cm.
- CBSE 2023Set 55/1/11 markMCQQ.For a concave mirror of focal length f, the minimum distance between an object and its real image is :(a) zero(b) f(c) 2f(d) 4f
›Reveal solutionSolution
For a concave mirror, the object and its real image can be brought arbitrarily close together, but the minimum possible distance between them is zero — achieved when the object is at the centre of curvature and the image coincides with it.
The question asks for the minimum distance between an object and its real image formed by a concave mirror. This is a classic problem that tests your understanding of the mirror formula and the concept of real images.
The core idea
A real image is formed when rays actually converge after reflection. For a concave mirror, a real image is formed only when the object is placed beyond the focus (i.e., u>f). The image distance v is then positive (real) and given by the mirror formula:
u1+v1=f1
The distance between the object and its image is ∣u−v∣. We want to find the smallest possible value of this distance for real images.
Step-by-step reasoning
- Set up the mirror formula For a concave mirror, f is positive. Let u be the object distance (positive, measured from the mirror). For a real image, v is also positive. The mirror formula gives:
v1=f1−u1=ufu−f
So:
v=u−fuf
- Write the distance between object and image Let D=∣u−v∣. Since both u and v are positive and measured from the mirror, the object and image lie on the same side of the mirror. The distance between them is:
D=∣u−v∣=u−u−fuf
- Simplify the expression Factor u:
D=u1−u−ff=uu−fu−f−f=uu−fu−2f
Since for real images u>f, the denominator u−f>0. The sign of u−2f depends on u. So:
D=u⋅u−f∣u−2f∣
-
Analyse the behaviour
- If u>2f, then u−2f>0, so D=u⋅u−fu−2f.
- If f<u<2f, then u−2f<0, so D=u⋅u−f2f−u.
In both cases, D is positive. The question is: can D become zero?
-
When does D=0?
D=0 when ∣u−2f∣=0, i.e., when u=2f.
At u=2f, the mirror formula gives:
v=2f−f2f⋅f=f2f2=2f
So the image is also at 2f — the object and image coincide at the centre of curvature. The distance between them is 0.
- Is this a real image? Yes. At u=2f, the image is real, inverted, and of the same size as the object. It is formed at the same point as the object. So the distance is indeed zero.
Watch outA common mistake is to think the minimum distance is 4f (which is the minimum distance between an object and its real image when the image is not at the same location — that's a different problem). Here, the object and image can actually coincide, so the distance can be zero.
TipThe condition u=2f gives v=2f, so D=0. This is the only case where the object and its real image are at the same point. For any other u, D>0.
✓Final answerThe minimum distance is zero, so the correct option is (a).
- CBSE 2023Set F1 markMCQQ.A spherical mirror is immersed in water. Its focal length will (A) decrease (B) increase (C) remain same (D) none of these
›Reveal solutionSolution
A mirror's focal length depends only on its radius, so immersing it in water does not change f.
Unlike a lens (whose focal length depends on the refractive index of the medium through the lens-maker's formula), a spherical mirror forms images purely by reflection. Its focal length is
f=2R,
where R is the radius of curvature. This is a geometric property of the mirror and is independent of the medium in which the mirror is placed. Hence in water the focal length remains the same.
✓Final answer(C) remain same.
- CBSE 2023Set ANNUAL1 markQ.The radius of curvature of a concave mirror is 28 cm, its focal length will be?
›Reveal solutionSolution
For a spherical mirror, the focal length is half the radius of curvature: f = R/2.
For a concave mirror, the focus lies midway between the pole and the centre of curvature, so f=2R.
Given R=28 cm: f=228=14 cm.
✓Final answerf = 14 cm.
- CBSE 2023Set TERM21 markMCQQ.Focal length of Plane mirror is :(a) Infinite(b) Zero(c) 10 cm(d) 20 cm
›Reveal solutionSolution
A plane mirror can be thought of as a spherical mirror whose radius of curvature is infinite, so its focal length is also infinite.
For a spherical mirror, f=R/2, where R is the radius of curvature. A plane mirror is the limiting case of a spherical mirror with R→∞ (an infinitely large sphere looks flat locally). Hence its focal length is also infinite — parallel rays incident on a plane mirror remain parallel after reflection and never converge to a real focal point (nor a virtual one at a finite distance).
✓Final answer(a) Infinite.
- CBSE 2019Set ANNUAL1 markQ.A convex mirror is placed inside water. Will its focal length change? (Write 'Yes' or 'No')
›Reveal solutionSolution
A mirror's focal length depends only on its radius of curvature (f = R/2), not on the medium, so it does not change in water.
Reflection at a mirror obeys the law of reflection regardless of the medium in which it is placed. The focal length of a spherical mirror is fixed purely by its geometry:
f = R/2,
where R is the radius of curvature. There is no refractive index in this relation. This is unlike a lens, whose focal length depends on the refractive index of the surrounding medium. Hence a convex mirror's focal length is unchanged when placed in water.
✓Final answerNo.
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.