An ether is given as CH3-CH(CH3)-O-CH3, that is a methoxy group (-O-CH3) attached to the central carbon of a p

NCERT Exemplar · Q9

Q. An ether is given as CH3-CH(CH3)-O-CH3, that is a methoxy group (-O-CH3) attached to the central carbon of a propane skeleton (isopropyl methyl ether). What is its IUPAC name?

(i) 1-methoxy-1-methylethane

(ii) 2-methoxy-2-methylethane

(iii) 2-methoxypropane

(iv) isopropylmethyl ether

Gujarat GsebMCQ· 1mImportance★★★★★

45% · 61/135 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — IUPAC Nomenclature

IUPAC Nomenclature (Organic Compounds)

IUPAC nomenclature is a systematic way to name a compound so that its name alone tells you its exact structure, with no ambiguity. Every organic name follows the same underlying recipe, whatever the functional group.

The Recipe

Identify the principal characteristic group. If the molecule has a functional group senior enough to be named as a suffix (carboxylic acid > ester > amide > nitrile > aldehyde > ketone > alcohol > amine, and so on down the seniority order), that group decides the suffix and must be included in the parent chain. A halogen is never senior enough to be a suffix — it is always named as a prefix ("halo-"), whatever else is present.
Choose the parent chain. The parent is the longest continuous carbon chain that contains the principal characteristic group (if there is one). Among chains of the same length, the one with the most substituents wins.
Number the chain. Number from whichever end gives the LOWEST LOCANT to the principal characteristic group first. If there is no principal group (e.g. a simple haloalkane, or an alkene with a halogen substituent), lowest locant goes to the site of unsaturation (double/triple bond) first, then to substituents as a set.

Watch out

When two numbering directions give the SAME locant for the principal group/unsaturation (a genuine tie), the tie-break is the lowest locant SET for the substituents as a group — compare the two sets at their first point of difference. Only if the sets are themselves tied does the alphabetically-first substituent get the lower number.
Name and cite the substituents as prefixes, in alphabetical order (ignoring multiplying prefixes like di-/tri- but not ignoring structural prefixes like iso-/cyclo-), each with its own locant.
Assemble the name: locants + substituent prefixes (alphabetical) + parent chain name + suffix (if any).

Worked Example

$CH_3-CH(Cl)-CH(CH_3)-CH_2-CH_3$ : the longest chain is 5 carbons (pentane), no principal characteristic group (just a halogen substituent), so number for the lowest locant set. From the left: Cl at C2, methyl at C3 → set {2,3}. From the right: methyl at C3, Cl at C4 → set {3,4}. {2,3} is lower, so numbering from the left wins: 2-chloro-3-methylpentane. …

Why this formula?

IUPAC Nomenclature: Why the Rules Work the Way They Do

IUPAC nomenclature is not a single formula, but a system of rules designed to give every organic compound a unique, unambiguous name. The "why" behind these rules lies in clarity, consistency, and communication — ensuring that a chemist in Tokyo and one in Toronto draw the same structure from the same name.

1. The Core Principle: The Longest Carbon Chain

Rule: Identify the longest continuous chain of carbon atoms. This becomes the parent chain (e.g., pentane, hexane).

Why?

The longest chain represents the backbone of the molecule.
It gives the most stable, fundamental name — shorter chains would be branches, not the main structure.
Example: In a molecule with 5 carbons in a row and a 2-carbon branch, calling it "pentane" (not "ethane") tells you the core skeleton is 5 carbons long.

Key idea: The parent chain is the maximum continuous path — not necessarily the one that looks "straight" on paper.

2. Numbering: Lowest Locants (The "First Point of Difference" Rule)

Rule: Number the parent chain so that substituents get the smallest possible numbers. When there's a tie, compare the first point of difference.

Why?

This ensures reproducibility — two chemists will always number the same way.
It avoids ambiguity: "2-methylpentane" is unambiguous; "3-methylpentane" would be a different compound.
The first point of difference rule: If you have substituents at positions 2,4 and 3,5, choose 2,4 because 2 < 3 (the first number is smaller).

Example:

For a methyl group on carbon 2 vs. carbon 4 of a 5-carbon chain:
- 2-methylpentane (correct)
- 4-methylpentane (wrong — higher number)

3. Alphabetical Order of Substituents

Rule: List substituents in alphabetical order (ignoring prefixes like di-, tri-, sec-, tert- but not iso-).

Why?

Alphabetical order is a universal sorting convention — no need to remember priority based on size or complexity.
It makes names searchable and predictable.
Example: "3-ethyl-2-methylpentane" (e before m) — not "2-methyl-3-ethylpentane".

Exception: Prefixes like iso- and neo- are considered part of the name (e.g., isopropyl comes before methyl because "i" < "m").

4. Multiple Bonds: The "Lowest Locant" Rule for Alkenes/Alkynes

Rule: Number the chain so that the double or triple bond gets the lowest possible number, even if it means giving a substituent a higher number.

Why?

The functional group (alkene/alkyne) is more important than alkyl substituents.
The bond position defines the compound's reactivity and geometry.
Example: In pent-2-ene (not pent-3-ene), the double bond is between carbons 2 and 3 — the lower number (2) is used.

Priority order:

Principal functional group (e.g., -OH, -COOH, C=C)
Multiple bonds
Substituents (alkyl, halo, etc.)

5. The "Suffix" and "Prefix" System …

Start your 14-day free trial to unlock the full solution →

Ethers are named substitutively by treating the smaller -OR group as an alkoxy substituent on the parent chain formed by the larger alkyl group. Here the larger group is propane and the substituent is methoxy at C-2, so the name is 2-methoxypropane.

Concept

For R-O-R', the IUPAC substitutive rule takes the larger/longer alkyl group as the parent hydrocarbon; the remaining -O-R' group is named as an alkoxy prefix.

Steps

Split the ether: the two groups on oxygen are isopropyl, (CH3)2CH-, and methyl, CH3-.
Larger group = isopropyl (three carbons) -> parent hydrocarbon propane.
The other group is -O-CH3 = methoxy, attached to the central (C-2) carbon of propane.
Name -> 2-methoxypropane. …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

GSEB Higher Secondary Certificate (HSC) Examination 2026Set ANNUAL1 markMCQ
$Q. How many H and O atoms are present in vanillin respectively?$
(a) 8 and 4
(b) 9 and 3
(c) 9 and 4
(d) 8 and 3
›Reveal solutionSolution

Vanillin's molecular formula is C8H8O3 (4-hydroxy-3-methoxybenzaldehyde), giving 8 H atoms and 3 O atoms.

Vanillin, a naturally occurring aromatic aldehyde (the primary flavour compound of vanilla), has the structure of a benzene ring bearing three substituents: –CHO (aldehyde), –OH (hydroxyl), and –OCH3 (methoxy), with 3 remaining ring hydrogens.

Its molecular formula is C8H8O3: …

Start your 14-day free trial to see the full solution →
GUJCET 2025Set 031 markMCQ
$-COOH, -OH, -OC_{2}H_{5}$
›Reveal solutionSolution
[!TLDR]

Vanillin contains $-CHO$ , $-OH$ and $-OCH_3$ groups.

Concept

Vanillin is the aromatic aldehyde 4-hydroxy-3-methoxybenzaldehyde, responsible for the smell of vanilla.

Solution

Its structure is a benzene ring bearing:

an aldehyde group $-CHO$ ,

a phenolic hydroxyl group $-OH$ , …
Start your 14-day free trial to see the full solution →
GSEB Higher Secondary Certificate (HSC) Examination 2025Set ANNUAL1 markMCQ
$Q. Which one is the correct IUPAC name of Phenyl isopentyl ether.$
(a) 3 - Methyl butoxy benzene
(b) 2 - Methyl butoxy benzene
(c) 4 - Phenoxy 2-Methyl butane
(d) 1 - Phenoxy - 3 - Methyl butane
›Reveal solutionSolution

Phenyl isopentyl ether is C6H5-O-CH2CH2CH(CH3)2; naming the isopentyl (3-methylbutyl) chain as the substituent alkoxy group on benzene gives 3-methylbutoxybenzene.

Isopentyl (isoamyl) group = 3-methylbutyl = -CH2-CH2-CH(CH3)-CH3 (numbering the 4-carbon chain from the point of attachment, with a methyl branch at C3).

Phenyl isopentyl ether: C6H5-O-CH2-CH2-CH(CH3)-CH3

…

Start your 14-day free trial to see the full solution →
GSEB Higher Secondary Certificate (HSC) Examination 2025Set ANNUAL1 markMCQ
$Q. What is number of Hydrogen atom in Cinnamaldehyde?$
(a) 8
(b) 9
(c) 7
(d) 5
›Reveal solutionSolution
Cinnamaldehyde is C6H5-CH=CH-CHO (molecular formula C9H8O); counting hydrogens on the phenyl ring, the vinyl carbons, and the aldehyde group gives 8 in total.

Cinnamaldehyde structure: C6H5-CH=CH-CHO (3-phenylprop-2-enal)

Count hydrogens:

Phenyl ring (C6H5-): 5 H

=CH-CH= (the two vinylic carbons): 1 H each = 2 H …
Start your 14-day free trial to see the full solution →
GSEB Higher Secondary Certificate (HSC) Examination 2024Set ANNUAL1 markMCQ
$Q. Name the following compound according to IUPAC system: (CH3)2-CH-CH2-CH(OH)-CH-(CH2OH)-CH3$
(a) 2,5-dimethyl-Hexane-1,3-diol
(b) 2-methyl-4-Hydroxy-5-(methyl alcohol) Hexane
(c) 2,5 dimethyl-Hexane-4,6-diol
(d) 5 methyl-3-Hydroxy-(methyl alcohol) Hexane
›Reveal solutionSolution

Naming this compound needs choosing the longest carbon chain that includes BOTH hydroxyl-bearing carbons (since -diol suffix groups must be part of the principal chain), then numbering to give the OH groups the lowest locants.

Structure: (CH3)2CH-CH2-CH(OH)-CH(CH2OH)-CH3

The two -OH groups are on: the middle CH(OH) carbon, and the terminal -CH2OH carbon (attached as a branch off the next carbon). To include both in the main chain (required since they are the principal characteristic group, -diol), trace a 6-carbon path: start at the CH2OH carbon (C1), through the carbon bearing it (C2, which also carries a -CH3 branch), through the CH-OH carbon (C3), the CH2 (C4), the CH bearing the remaini …

Start your 14-day free trial to see the full solution →
GSEB Higher Secondary Certificate (HSC) Examination 2023Set ANNUAL1 markMCQ
$Q. Which compound will give yellow precipitate on reaction with sodium hypoiodite?$
(a) sec-Butyl alcohol
(b) tert-Butyl alcohol
(c) isobutyl alcohol
(d) n-Butyl alcohol
›Reveal solutionSolution

The iodoform test (yellow CHI3) is positive for CH3-CH(OH)- alcohols; sec-butyl alcohol fits.

Sodium hypoiodite (NaOI = NaOH + I2) gives a yellow precipitate of iodoform (CHI3) with compounds containing the CH3-CO- group or an alcohol that oxidises to it, i.e. the CH3-CH(OH)- unit. …

Start your 14-day free trial to see the full solution →
GSEB Higher Secondary Certificate (HSC) Examination 2022Set ANNUAL1 markMCQ
$Q. What is the correct structural formula of cinnamaldehyde?$
(a) Ph-CH=CH-CHO
(b) Ph-CH2-CH2-CHO
(c) Ph-C#C-CHO
(d) Ph-CH2-CH=CH-CHO
›Reveal solutionSolution

Cinnamaldehyde is the alpha,beta-unsaturated aldehyde responsible for cinnamon's flavour/aroma, with a phenyl group conjugated through a C=C double bond to the aldehyde.

Its structure is Ph-CH=CH-CHO (3-phenylprop-2-enal): a benzene ring attached to a -CH=CH-CHO chain, giving full conjugation between the ring, the alkene, and the carbonyl. Option (b) is the saturated (dihydro) analogue, option (c) has a triple bond in …

Start your 14-day free trial to see the full solution →
GUJCET 2021Set 151 markMCQ
$CH_3$
›Reveal solutionSolution
Lowest-locant rule fixes the gem-dimethyl carbon as C-1, giving 2-ethoxy-1,1-dimethylcyclohexane.

Concept — lowest locants. The substituents are one ethoxy and two methyl groups, on two adjacent ring carbons. Compare the two possible numbering directions:

gem-dimethyl carbon = C1, ethoxy carbon = C2 → locant set $\{1,1,2\}$

ethoxy carbon = C1, gem-dimethyl carbon = C2 → locant set $\{1,2,2\}$ …
Start your 14-day free trial to see the full solution →
GUJCET 2019Set 131 markMCQ
$Q. Give the IUPAC name for methyl salicylate. (A) Methyl - 3 - hydroxy benzoate (B) Methyl - 2 - hydroxy benzoate (C) 2' - hydroxy benzoic acid (D) Methoxy benzoic acid$
›Reveal solutionSolution

Methyl salicylate is the methyl ester of salicylic acid (2-hydroxybenzoic acid): methyl 2-hydroxybenzoate.

Concept — naming an ester. Salicylic acid is 2-hydroxybenzoic acid (OH ortho to COOH). Its methyl ester replaces the acid –OH with –OCH₃, giving methyl 2-hydroxybenzoate. …
Start your 14-day free trial to see the full solution →
GSEB Higher Secondary Certificate (HSC) Examination 2018Set ANNUAL1 markMCQ
$Q. What is the IUPAC name of 'Acrolein'?$
(a) Pentanal
(b) 3-methoxy propanal
(c) But-2-enal
(d) Prop-2-enal
›Reveal solutionSolution

Acrolein = CH2=CH-CHO = prop-2-enal.

Acrolein (acrylaldehyde) has the structure CH2=CH-CHO: a three-carbon chain with an aldehyde group (C1) and a double bond between C2 and C3. …

Start your 14-day free trial to see the full solution →
GUJCET 2015Set C1 markMCQ
$Q. What is IUPAC name for isophthalic acid? (A) Benzene-1,2 dicarboxylic acid (B) Benzene-1,3 dicarboxylic acid (C) Benzene-1,4 dicarboxylic acid (D) Benzene-1,5 dicarboxylic acid$
›Reveal solutionSolution
[!TLDR]

Isophthalic acid = benzene-1,3-dicarboxylic acid.

Concept

The three benzene dicarboxylic acids: phthalic acid = benzene-1,2- (ortho), isophthalic acid = benzene-1,3- (meta), terephthalic acid = benzene-1,4- (para).

Solution …
Start your 14-day free trial to see the full solution →

←Previous questionQ8 — IUPAC name of m-cresol is ______. (i) 3-methylphenol (ii) 3-chlorophen…→Next questionQ10 — Four anionic species are given: (a) hydroxide ion, HO-; (b) an alkoxid…

Q.An ether is given as CH3-CH(CH3)-O-CH3, that is a methoxy group (-O-CH3) attached to the central carbon of a propane skeleton (isopropyl methyl ether). What is its IUPAC name?

Concept understanding — IUPAC Nomenclature

IUPAC Nomenclature (Organic Compounds)

The Recipe

Worked Example

Why this formula?

IUPAC Nomenclature: Why the Rules Work the Way They Do

1. The Core Principle: The Longest Carbon Chain

2. Numbering: Lowest Locants (The "First Point of Difference" Rule)

3. Alphabetical Order of Substituents

4. Multiple Bonds: The "Lowest Locant" Rule for Alkenes/Alkynes

5. The "Suffix" and "Prefix" System …

Concept

Steps

Method: Larger-Group-as-Parent Method for Naming a Simple Ether

Core Concept

Steps

Concept

Solution

Concept

Solution …

Q.An ether is given as CH3-CH(CH3)-O-CH3, that is a methoxy group (-O-CH3) attached to the central carbon of a propane skeleton (isopropyl methyl ether). What is its IUPAC name?

Concept

Steps

🎓Unlock everything free for 14 days

Unlock everything free for 14 days