Q.Suggest a reagent for the following conversion. The starting material is a secondary allylic alcohol, pent-3-en-2-ol (CH3-CH(OH)-CH=CH-CH3), and the product is the corresponding alpha,beta-unsaturated ketone, pent-3-en-2-one (CH3-CO-CH=CH-CH3); the carbon-carbon double bond is retained unchanged and only the -CH(OH)- group is oxidised to a >C=O group.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Alcohol Oxidation
Alcohol Oxidation: The Intuition First
Imagine you have a molecule of ethanol — the alcohol in your hand sanitizer or a drink. It has a carbon atom bonded to an –OH group. Now picture that –OH group as a "handle" that can be transformed. Oxidation, in organic chemistry, doesn't always mean adding oxygen — it often means removing hydrogen from a carbon that already has a bond to oxygen. For alcohols, oxidation is like "stripping away" hydrogen atoms from the carbon that holds the –OH, turning the alcohol into a more oxidized functional group.
Think of it this way: a primary alcohol (R–CH₂–OH) has two hydrogens on the carbon with the –OH. If you remove one hydrogen and the hydrogen from the –OH, you get an aldehyde (R–CHO). Remove both hydrogens (and the –OH hydrogen), and you get a carboxylic acid (R–COOH). A secondary alcohol (R–CHOH–R') has only one hydrogen on that carbon — remove it, and you get a ketone (R–CO–R'). A tertiary alcohol has no hydrogen on that carbon — so it cannot be oxidized without breaking the carbon skeleton.
That's the core intuition: oxidation of an alcohol is about removing hydrogens from the carbon bearing the –OH group. The more hydrogens you can remove, the more oxidized the product.
The Precise Statement
Alcohol oxidation is the process in which an alcohol loses hydrogen atoms (dehydrogenation) from the carbon bonded to the –OH group, increasing the number of C–O bonds (or decreasing C–H bonds). The outcome depends on the class of the alcohol:
| Alcohol Class | Structure | Product after oxidation | Reagent example |
|---|---|---|---|
| Primary (1°) | R–CH₂–OH | Aldehyde (R–CHO) then Carboxylic acid (R–COOH) | PCC (stops at aldehyde); K₂Cr₂O₇/H⁺ (goes to acid) |
| Secondary (2°) | R–CHOH–R' | Ketone (R–CO–R') | K₂Cr₂O₇/H⁺, CrO₃, etc. |
| Tertiary (3°) | R₃C–OH | No reaction (under normal conditions) | — |
A common mistake: students think "oxidation" always adds oxygen. For alcohols, it's removal of hydrogen from the carbon with the –OH. The oxygen from the –OH stays — it's the hydrogens that leave.
Why Does Tertiary Alcohol Not Oxidize?
Look at the carbon with the –OH in a tertiary alcohol: it has three carbon groups attached and no hydrogen. To form a C=O bond, you'd need to remove a hydrogen from that carbon — but there is none. The only way to oxidize a tertiary alcohol is to break a C–C bond (strong and difficult), which is not typical oxidation. So in standard organic chemistry, tertiary alcohols are inert to mild oxidizing agents.
A Real-World Analogy
Think of the alcohol carbon as a "parking spot" with a certain number of hydrogen "cars." Primary alcohol has two cars parked. Oxidation is like towing away one car (→ aldehyde) or both cars (→ carboxylic acid). Secondary alcohol has one car — tow it away, and you get a ketone. Tertiary alcohol has zero cars — nothing to tow, so no reaction.
Key Reagents to Remember (for exams)
- PCC (pyridinium chlorochromate): oxidizes 1° alcohols to aldehydes only — stops there.
- K₂Cr₂O₇ / H₂SO₄ (acidified potassium dichromate): oxidizes 1° alcohols all the way to carboxylic acids; 2° alcohols to ketones. (Not to be confused with Jones reagent, which is specifically CrO₃ dissolved in dilute aqueous H₂SO₄, often used in acetone — a related but distinct oxidant with the same general 1°→acid / 2°→ketone outcome.) …
Why this formula?
Alcohol Oxidation: Why the Reactions Work the Way They Do
Alcohol oxidation is a fundamental reaction in organic chemistry, and understanding why it proceeds as it does is crucial for Indian board exams (Class 12, JEE, NEET). Let's break it down step-by-step.
1. The Core Idea: Loss of Hydrogen
Oxidation in organic chemistry means loss of hydrogen (or gain of oxygen). For alcohols, this happens at the carbon bearing the –OH group.
- Primary alcohol (R−CH2OH): Has two hydrogens on the carbon attached to –OH.
- Secondary alcohol (R2CHOH): Has one hydrogen on that carbon.
- Tertiary alcohol (R3COH): Has zero hydrogens on that carbon.
Key insight: The number of hydrogens on the carbon with –OH determines if and how far oxidation can go.
2. Why Primary Alcohols Give Aldehydes (Then Carboxylic Acids)
Step 1: Aldehyde formation
When a primary alcohol (R−CH2OH) is oxidized, the first product is an aldehyde (R−CHO).
Why? The oxidizing agent (like K2Cr2O7 / H2SO4 or PCC) removes two hydrogens:
- One from the –OH group
- One from the carbon atom
The carbon–oxygen bond becomes a double bond (C=O), forming the aldehyde.
R−CH2OH[O]R−CHO+H2O
But why stop here? The aldehyde still has one hydrogen on the carbonyl carbon. If a strong oxidant is present, it can remove that hydrogen too.
Step 2: Carboxylic acid formation
With excess strong oxidant (e.g., K2Cr2O7 / H2SO4, heat), the aldehyde is further oxidized to a carboxylic acid (R−COOH).
R−CHO[O]R−COOH
Why does this happen? The aldehyde's carbonyl carbon is electrophilic (partially positive). Water (from the reaction medium) adds to it, forming a gem-diol intermediate. The oxidant then removes two more hydrogens, giving the acid.
Exam tip: To stop at the aldehyde, use a mild oxidant like PCC (pyridinium chlorochromate) in anhydrous conditions — no water means no gem-diol formation.
3. Why Secondary Alcohols Give Ketones (and Stop)
A secondary alcohol (R2CHOH) has only one hydrogen on the carbon with –OH. Oxidation removes:
- One hydrogen from –OH
- One hydrogen from the carbon
This forms a ketone (R2C=O).
R2CHOH[O]R2C=O+H2O
Why does it stop here? The ketone has no hydrogen on the carbonyl carbon. Without that hydrogen, further oxidation (under normal conditions) is impossible — you'd need to break a C−C bond, which requires much harsher conditions.
Key result: Secondary alcohols cannot be oxidized further than ketones under standard conditions.
4. Why Tertiary Alcohols Do NOT Oxidize
A tertiary alcohol (R3COH) has zero hydrogens on the carbon bearing –OH.
What happens if you try? The oxidant cannot remove any hydrogen from that carbon. The only possible reaction would be breaking a C−C bond, which doesn't happen under normal oxidation conditions.
Result: Tertiary alcohols are resistant to oxidation under mild to moderate conditions. They require strong heating with powerful oxidants (like K2Cr2O7 / H2SO4, heat) to break carbon–carbon bonds — this is destructive oxidation, not useful for synthesis.
5. The "Why" in One Table
| Alcohol Type | Hydrogens on C–OH | Product | Why? |
|---|---|---|---|
| Primary (1∘) | 2 | Aldehyde → Carboxylic acid | Two hydrogens available; aldehyde still has one more |
A secondary alcohol has to be oxidised to a ketone without touching the C=C double bond. Pyridinium chlorochromate (PCC) is a mild oxidant that does exactly this. …
The transformation is oxidation of a secondary alcohol to a ketone while the carbon-carbon double bond must survive. A mild, selective oxidant is needed - pyridinium chlorochromate (PCC) - because strong oxidants (like KMnO4 or acidic dichromate) would attack the alkene as well.
Concept
Secondary alcohols oxidise to ketones. The requirement here is chemoselectivity: keep the C=C double bond intact. That rules out harsh reagents and calls for a mild Cr(VI) reagent.
Choice of reagent
- Pyridinium chlorochromate (PCC), C5H5NH+ ClCrO3-, in an anhydrous solvent such as dichloromethane, cleanly oxidises the secondary allylic alcohol -CH(OH)- to the ketone >C=O.
- PCC does not oxidise (cleave) the alkene and does not over-oxidise, so the alpha,beta-unsaturated ketone pent-3-en-2-one is obtained. …
Method: Chemoselective Oxidant-Choice Method (PCC for Allylic/Alkene-Compatible Oxidation)
Core Concept
When a synthesis requires oxidising a secondary (or primary) alcohol to a carbonyl WITHOUT disturbing a nearby C=C double bond, the reagent must be chosen for chemoselectivity, not just for "being an oxidant" — strong non-selective oxidants (KMnO4, hot acidic K2Cr2O7) will also attack/cleave the alkene, so a mild Cr(VI) reagent like pyridinium chlorochromate (PCC) is required instead.
Steps
- Compare the starting material and product functional-group by functional-group: identify which bond(s) must change (here, -CH(OH)- -> >C=O) and which must NOT change (here, the C=C double bond).
- List candidate oxidants capable of converting a secondary alcohol to a ketone: PCC, Jones reagent (H2SO4/Na2Cr2O7 or K2Cr2O7), KMnO4, Cu/573K dehydrogenation, Swern oxidation, etc.
- Screen out any oxidant known to also react with (oxidatively cleave or dihydroxylate) a C=C double bond — this eliminates KMnO4 and hot acidic dichromate/Jones reagent.
- Screen out any method not compatible with the substrate class (e.g., catalytic Cu dehydrogenation is a vapour-phase method, not practical/selective for a delicate allylic system here). …
Showing the 12 most recent of 14 on this concept.
- GUJCET 2025Set 031 markMCQQ.Identify R', R'' and R''' for the following reaction. [FIGURE: a ketone R'R''C=O reacting via(i) R'''MgX(ii) H2O to give 2-methylbutane-2-ol.] (A) R′=C2H5,R′′=C2H5,R′′′=CH3 (B) R′=CH3,R′′=C2H5,R′′′=CH3 (C) R′=C2H5,R′′=CH3,R′′′=C2H5 (D) R′=CH3,R′′=CH3,R′′′=CH3
›Reveal solutionSolution
Ketone R′R′′C=O + R′′′MgX→R′R′′R′′′C−OH; the product's three alkyls are CH3, CH3, C2H5.
Concept — Grignard synthesis of tertiary alcohols. A ketone gives a tertiary alcohol whose carbinol carbon bears the ketone's two groups plus the Grignard's group.
Steps.
- 2-methylbutan-2-ol: CH3−C(OH)(CH3)−CH2CH3. The C–OH carbon carries CH3, CH3, C2H5.
- So {R′,R′′,R′′′}={CH3,CH3,C2H5}. …
- GUJCET 2025Set 031 markMCQQ.For the given reaction, identify the proper reagent. [FIGURE: (hydroxymethyl)cyclohexane (cyclohexane ring bearing a CH2OH group) converted to cyclohexanecarbaldehyde (cyclohexane ring bearing a CHO group).] (A) KMnO4/H2SO4 (B) O3/H2O−Zn dust (C) C5H5NH+CrO3Cl− (D) CrO3+(CH3CO)2O
›Reveal solutionSolution
[!TLDR]
Oxidising a primary alcohol to an aldehyde requires the mild, selective reagent PCC (C5H5NH+CrO3Cl−).
Concept
Primary alcohols are oxidised to aldehydes and can be further oxidised to carboxylic acids by strong oxidants. To stop cleanly at the aldehyde, a mild oxidant such as PCC (in anhydrous dichloromethane) is used.
Solution
The substrate (hydroxymethyl)cyclohexane has a −CH2OH group that must become −CHO (cyclohexanecarbaldehyde) — a controlled oxidation to the aldehyde.
- (A) KMnO4/H2SO4: strong oxidant, over-oxidises to the carboxylic acid.
- (B) O3/H2O–Zn: ozonolysis, cleaves C=C double bonds — not applicable to an alcohol. …
- GUJCET 2023Set 091 markMCQQ.Which of the following alcohol undergo dehydration reaction with Cu (Copper) metal at 573 K temperature? (A) Secondary and Tertiary (B) Primary & Secondary (C) Primary and Tertiary (D) Only Tertiary
›Reveal solutionSolution
With Cu at 573 K: 1° and 2° alcohols dehydrogenate (→ aldehyde/ketone), while only tertiary alcohols dehydrate (→ alkene).
Concept. Passing alcohol vapour over heated copper at 573 K:
- Primary → aldehyde (dehydrogenation, loss of H2)
- Secondary → ketone (dehydrogenation)
- Tertiary → has no α-H on the carbinol carbon to lose as H2, so it instead loses water and dehydrates to an alkene. …
- GSEB Higher Secondary Certificate (HSC) Examination 2023Set ANNUAL1 markMCQQ.R'-X --Na/ether--> 2,3-dimethylbutane. Identify R'.(a) (CH3)2CH-(b) (C2H5)2CH-(c) (CH3CH2)3C-(d) (CH3)3C-
›Reveal solutionSolution
2,3-dimethylbutane is symmetric, made by Wurtz coupling of two isopropyl (2-propyl) groups.
Wurtz reaction: 2 R'-X + 2 Na --dry ether--> R'-R' + 2 NaX. It couples two alkyl groups to give a symmetrical alkane.
…
- GUJCET 2022Set 171 markMCQQ.Which product is obtained from following reaction? [FIGURE: a cyclohexanone ring (C=O on the ring) bearing a −CH2−CO−OCH3 substituent at the 2-position] NaBH4 (A) Cyclohexanol ring (ring bearing OH) with a −CH2−CH2−OCH3 substituent (B) Cyclohexane ring with a −CH2−CO−OCH3 substituent (no ring OH) (C) Cyclohexenol ring (ring bearing OH and a ring double bond) with a −CH2−CO−OCH3 substituent (D) Cyclohexanone ring (ring C=O) with a −CH2−CH2−OCH3 substituent
›Reveal solutionSolution
NaBH4 is a mild reducing agent — it reduces aldehydes/ketones to alcohols but does NOT reduce esters.
Concept: Sodium borohydride selectively reduces the cyclohexanone carbonyl (C=O) to a secondary alcohol (CH−OH), converting the ring ketone into a ring alcohol. The methyl ester group −CH2−CO−OCH3 is unreactive toward NaBH4 and is retained unchanged. Among the options, only the choic …
- GUJCET 2021Set 151 markMCQQ.Which Grignard reagent gives 2-methylpropan-1-ol with reaction with methanal? (A) CH3−CH2−CH2−Mg−X (B) CH3−CH(CH3)−Mg−X (C) CH3−CH=CH−Mg−X (D) CH3−CH(CH3)−CH2−Mg−X
›Reveal solutionSolution
Grignard + methanal → primary alcohol R−CH2OH; work backwards to find R.
Concept: R−MgX+HCHO→R−CH2−OMgXH2OR−CH2OH. Methanal always adds one carbon and gives a primary alcohol. …
- GUJCET 2021Set 151 markMCQQ.Which reagent is used to convert Allyl alcohol to propenal? (A) PCC (B) O3/H2O - Zn (Powder) (C) DIBAL-H (D) All above
›Reveal solutionSolution
PCC cleanly oxidises 1° alcohol → aldehyde and leaves the double bond intact.
Concept: Pyridinium chlorochromate (PCC) is a mild oxidant that stops at the aldehyde stage and does not attack C=C.
CH2=CH−CH2OHPCCCH2=CH−CHO (propenal) …
- GUJCET 2020Set 071 markMCQQ.Cyclohexanone bearing a −CH2−C(=O)−OCH3 (methyl ester) substituent at the alpha position NaBH4 "X". What is "X" in the reaction? [FIGURE: structures shown for the substrate and each option] (A) The corresponding cyclohexanol (ring C=O reduced to CH-OH) still bearing the −CH2−C(=O)−OCH3 ester group (B) Cyclohexanone (ring C=O intact) bearing a −CH2−CH(OH)−CH3 group (C) Cyclohexanol bearing a −CH2−CH2−CH2−OH group (D) Cyclohexanol bearing a −CH2−CH2−CH3 group
›Reveal solutionSolution
NaBH₄ reduces the ketone (→ cyclohexanol) and does not touch the ester. …
- GUJCET 2020Set 071 markMCQQ.Which reagent is required to convert cyclohexanol to cyclohexanone? (A) Anhydrous CrO3 (B) O3/H2O - Zn dust (C) PCC (D) DIBAL-H
›Reveal solutionSolution
[!TLDR] Secondary alcohol → ketone needs a mild oxidant; PCC cleanly gives cyclohexanone.
Concept
Secondary alcohols are oxidised to ketones. PCC (pyridinium chlorochromate) is a mild, selective, non-aqueous oxidant that converts secondary alcohols to ketones without further oxidation. Ozonolysis reagents and DIBAL-H are not alcohol-oxidation reagents.
Solution
- (A) Anhydrous CrO3: a strong Cr(VI) oxidant, generally used with acid; not the selective mild reagent intended here. …
- GSEB Higher Secondary Certificate (HSC) Examination 2019Set ANNUAL1 markMCQQ.Substance A, on reaction with Cu at 573 K, gives Isobutylene. Which is the structural formula of substance A in this reaction?(a) CH3-CH(OH)-CH2-CH3(b) CH3-CH2-CH2-CH2-OH(c) CH3-CH(CH3)-CH2-OH(d) CH3-C(CH3)(CH3)-OH (i.e. (CH3)3C-OH)
›Reveal solutionSolution
Passed over hot copper at 573 K, a TERTIARY alcohol cannot dehydrogenate (it has no H on the carbinol carbon to lose alongside the O-H), so it instead undergoes dehydration to an alkene; a primary or secondary alcohol would dehydrogenate to an aldehyde or ketone instead.
Alcohols passed over copper catalyst at 573 K behave differently by class:
- Primary alcohols dehydrogenate to aldehydes (R-CH2-OH -> R-CHO + H2).
- Secondary alcohols dehydrogenate to ketones. …
- GSEB Higher Secondary Certificate (HSC) Examination 2018Set ANNUAL1 markMCQQ.Give the IUPAC name of the product obtained when Phenol is oxidized by chromic acid. (Na2Cr2O7 + Conc. H2SO4).(a) Cyclohexa-2,5-diene-1,4-dione(b) Cyclohexa-1,4-dione(c) Cyclohexanone(d) Cyclohexa-1,4-diene-2,5-dione
›Reveal solutionSolution
Phenol + Na2Cr2O7/conc. H2SO4 -> benzoquinone = cyclohexa-2,5-diene-1,4-dione.
Phenol on oxidation with chromic acid (from Na2Cr2O7 + conc. H2SO4) is converted to para-benzoquinone. Its IUPAC name is cyclohexa-2,5-diene-1,4-dione: a six-membered ring with C= …
- GSEB Higher Secondary Certificate (HSC) Examination 2018Set ANNUAL1 markMCQQ.Identify Pyridinium chlorochromate from the following.(a) pyridine ring, N+ - H . CrO3Cl^-(b) pyridine ring, N+ - H . CrO2Cl^-(c) pyridine ring, N+ - CrO3Cl^-(d) pyridine ring, N+ - H2 . CrO3Cl^-
›Reveal solutionSolution
PCC = pyridinium (C5H5N-H+) chlorochromate (CrO3Cl-), i.e. option (a).
Pyridinium chlorochromate (PCC) is a mild oxidising reagent (C5H5NH+ ClCrO3-) used to oxidise primary alcohols to aldehydes (without over-oxidation to acids). It consists of:
- the pyridinium cation: pyridine protonated at nitrogen, so N carries a positive charge and an N-H bond, and …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.