What is the product when $C_6H_5CH_2NH_2$ reacts with $HNO_2$?

> [!TLDR] > The reaction of benzylamine ($C_6H_5CH_2NH_2$) with nitrous acid ($HNO_2$) proceeds via diazotization followed by spontaneous decomposition to give benzyl alcohol ($C_6H_5CH_2OH$) as the major product, along with nitrogen gas. ## Concept and Intuition This question tests your understanding of **nucleophilic substitution reactions** — specifically, the reaction of primary amines with nitrous acid. The key here is that $HNO_2$ is unstable and generated *in situ* (usually from NaNO₂ + dilute HCl). It reacts with a primary amine to form a **diazonium salt**. But here’s the critical distinction: - **Aromatic primary amines** (like aniline, $C_6H_5NH_2$) form stable diazonium salts at low temperatures (0–5°C), which can be used in coupling reactions. - **Aliphatic primary amines** (like benzylamine, $C_6H_5CH_2NH_2$) form highly unstable diazonium salts that immediately decompose, even at low temperatures, to give a **carbocation** — and then a mixture of products. Benzylamine is special because it’s a **benzylic primary amine**: the $–CH_2NH_2$ group is attached directly to a benzene ring. The resulting carbocation ($C_6H_5CH_2^+$) is resonance-stabilized, making it relatively stable and leading to a cleaner product than with simple alkyl amines. > [!WARNING] > A common mistake is to treat benzylamine like an aromatic amine and expect a stable diazonium salt. Remember: the $–NH_2$ group is on an $sp^3$ carbon, not directly on the ring — so it behaves as an **aliphatic** primary amine, not an aromatic one. ## Step-by-Step Solution **1. Formation of nitrous acid** $HNO_2$ is prepared in the reaction mixture by mixing sodium nitrite with a dilute acid (typically HCl or $H_2SO_4$): $$NaNO_2 + HCl \rightarrow HNO_2 + NaCl$$ **2. Diazotization of benzylamine** The primary amine group reacts with $HNO_2$ to form an **unstable diazonium salt**: $$C_6H_5CH_2NH_2 + HNO_2 + HCl \rightarrow [C_6H_5CH_2N_2^+Cl^-] + 2H_2O$$ This is the same type of reactio

What is the product when C₆H₅CH₂NH₂ reacts with HNO₂?

NCERT Exemplar · Q30

C_6H_5CH_2NH_2

Karnataka PUCShort· 2mImportance★★★★★

54% · 58/108 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Nucleophilic Substitution Reactions

Nucleophilic Addition – From Intuition to Precision

Imagine you have a molecule with a carbon–oxygen double bond — a carbonyl group ( $\ce{C=O}$ ). That oxygen is greedy for electrons; it pulls them away from carbon, leaving the carbon slightly positive ( $\delta^+$ ) and the oxygen slightly negative ( $\delta^-$ ). Now, if you bring a species that is rich in electrons (a nucleophile, meaning "nucleus-loving"), it will naturally be attracted to that electron-deficient carbon. The nucleophile attacks the carbon, the $\pi$ bond breaks, and the oxygen picks up a proton (or some other electrophile) to become stable. That, in a nutshell, is nucleophilic addition.

Note

The key idea: a nucleophile adds across a polar multiple bond (usually $\ce{C=O}$ or $\ce{C≡N}$ ), breaking the $\pi$ bond and forming two new sigma bonds.

The Precise Statement

Nucleophilic addition is a reaction in which a nucleophile (an electron-rich species) forms a sigma bond with an electrophilic carbon atom of a polar multiple bond (typically a carbonyl group, $\ce{C=O}$ , or a nitrile, $\ce{C≡N}$ ), while the $\pi$ bond breaks. The resulting intermediate then captures a proton (or another electrophile) to give a neutral product.

In general form:

\ce{R2C=O + Nu^- ->[H^+] R2C(OH)Nu}

The nucleophile ( $\ce{Nu^-}$ ) attacks the carbonyl carbon; the oxygen becomes negatively charged; then a proton ( $\ce{H^+}$ ) from the medium attaches to the oxygen, yielding an alcohol.

Why It Happens – The Driving Force

The carbonyl carbon is electrophilic because:

Oxygen is more electronegative than carbon, so the $\ce{C=O}$ bond is polarised: $\ce{C^{\delta+}=O^{\delta-}}$ .
The $\pi$ bond is weaker than a $\sigma$ bond, so it can break relatively easily.

A nucleophile (like $\ce{OH^-}$ , $\ce{CN^-}$ , or $\ce{NH3}$ ) has a lone pair or a negative charge. It seeks positive centres. The attack forms a new $\sigma$ bond, and the $\pi$ electrons move entirely to oxygen, creating an alkoxide ion ( $\ce{R2C-O^-}$ ). This intermediate is then quenched by a proton.

Watch out

A common mistake: thinking the nucleophile attacks the oxygen. No — oxygen is already electron-rich; the nucleophile goes to the carbon because it is electron-deficient.

A Concrete Example – Addition of HCN to a Ketone

Take acetone ( $\ce{CH3COCH3}$ ) and hydrogen cyanide ( $\ce{HCN}$ ). In the presence of a base, $\ce{CN^-}$ (the nucleophile) attacks the carbonyl carbon:

\ce{CH3COCH3 + CN^- -> CH3C(O^-)(CN)CH3}

The alkoxide intermediate then picks up a proton from $\ce{HCN}$ (or from water) to give a cyanohydrin:

\ce{CH3C(O^-)(CN)CH3 + H^+ -> CH3C(OH)(CN)CH3}

The product is acetone cyanohydrin. Notice: two new sigma bonds formed ( $\ce{C-CN}$ and $\ce{O-H}$ ), and the $\pi$ bond is gone.

What Makes a Good Nucleophile?

Strong nucleophiles are usually negatively charged or have lone pairs:

$\ce{OH^-}$ , $\ce{CN^-}$ , $\ce{NH2^-}$ , $\ce{CH3O^-}$ , $\ce{H^-}$ (from hydride reagents like $\ce{NaBH4}$ or $\ce{LiAlH4}$ )
Neutral but polarisable: $\ce{NH3}$ , $\ce{H2O}$ (weaker, but can add under acidic conditions) …

Why this formula?

Nucleophilic Substitution Reactions: Why the Key Formulas Hold

Nucleophilic substitution reactions are a cornerstone of organic chemistry. Instead of just memorizing the rate laws, let's understand why they arise from the molecular events.

1. The Two Main Mechanisms: A Tale of Timing

The key formulas (rate laws) for nucleophilic substitution come directly from how many molecules are involved in the rate-determining step (RDS) — the slowest step that controls the overall reaction speed.

SN1: Unimolecular — The Leaving Group Goes First

The Rate Law:

\text{Rate} = k[\text{RX}]

Why?

The reaction happens in two steps:

Slow step (RDS): The C–X bond breaks spontaneously, forming a carbocation intermediate. Only the substrate ( $\text{RX}$ ) is involved.

\text{RX} \xrightarrow{\text{slow}} \text{R}^+ + \text{X}^-

Fast step: The nucleophile ( $\text{Nu}^-$ ) attacks the carbocation.

\text{R}^+ + \text{Nu}^- \xrightarrow{\text{fast}} \text{RNu}

Since the slow step depends only on the concentration of $\text{RX}$ , the rate law has no dependence on $[\text{Nu}^-]$ . The nucleophile arrives after the carbocation is formed — it cannot affect the speed of the first step.

Key insight: The rate is determined by how easily the leaving group leaves, not by how fast the nucleophile attacks.

SN2: Bimolecular — Simultaneous Attack and Departure

The Rate Law:

\text{Rate} = k[\text{RX}][\text{Nu}^-]

Why?

The reaction occurs in one concerted step:

The nucleophile attacks the carbon from one side at the same time as the leaving group departs from the opposite side.
Both $\text{RX}$ and $\text{Nu}^-$ must collide with the correct orientation and sufficient energy.

The rate depends on the frequency of productive collisions between the two molecules. This is directly proportional to the product of their concentrations:

\text{Rate} \propto [\text{RX}] \times [\text{Nu}^-]

Key insight: Both partners are involved in the transition state simultaneously — if either is missing, the reaction cannot proceed.

2. The Transition State: Why the Formulas Are Not Just "Given"

For SN2, the transition state has a pentavalent carbon (five bonds partially formed/broken). The energy barrier depends on steric hindrance — bulkier groups around carbon make it harder for the nucleophile to approach, which is why SN2 is favored at primary carbons. …

Start your 14-day free trial to unlock the full solution →

The reaction of benzylamine ( $C_6H_5CH_2NH_2$ ) with nitrous acid ( $HNO_2$ ) proceeds via diazotization followed by spontaneous decomposition to give benzyl alcohol ( $C_6H_5CH_2OH$ ) as the major product, along with nitrogen gas.

Concept and Intuition

This question tests your understanding of nucleophilic substitution reactions — specifically, the reaction of primary amines with nitrous acid. The key here is that $HNO_2$ is unstable and generated in situ (usually from NaNO₂ + dilute HCl). It reacts with a primary amine to form a diazonium salt.

But here’s the critical distinction:

Aromatic primary amines (like aniline, $C_6H_5NH_2$ ) form stable diazonium salts at low temperatures (0–5°C), which can be used in coupling reactions.
Aliphatic primary amines (like benzylamine, $C_6H_5CH_2NH_2$ ) form highly unstable diazonium salts that immediately decompose, even at low temperatures, to give a carbocation — and then a mixture of products.

Benzylamine is special because it’s a benzylic primary amine: the $–CH_2NH_2$ group is attached directly to a benzene ring. The resulting carbocation ( $C_6H_5CH_2^+$ ) is resonance-stabilized, making it relatively stable and leading to a cleaner product than with simple alkyl amines.

Watch out

A common mistake is to treat benzylamine like an aromatic amine and expect a stable diazonium salt. Remember: the $–NH_2$ group is on an $sp^3$ carbon, not directly on the ring — so it behaves as an aliphatic primary amine, not an aromatic one.

Step-by-Step Solution

1. Formation of nitrous acid

$HNO_2$ is prepared in the reaction mixture by mixing sodium nitrite with a dilute acid (typically HCl or $H_2SO_4$ ):

NaNO_2 + HCl \rightarrow HNO_2 + NaCl

2. Diazotization of benzylamine

The primary amine group reacts with $HNO_2$ to form an unstable diazonium salt:

C_6H_5CH_2NH_2 + HNO_2 + HCl \rightarrow [C_6H_5CH_2N_2^+Cl^-] + 2H_2O

This is the same type of reaction as with any primary amine — the $–NH_2$ group is converted to $–N_2^+$ .

3. Spontaneous decomposition

Unlike aromatic diazonium salts, this aliphatic diazonium salt is extremely unstable and decomposes instantly, even at 0°C, releasing nitrogen gas:

[C_6H_5CH_2N_2^+] \rightarrow C_6H_5CH_2^+ + N_2 \uparrow

The loss of $N_2$ is driven by the formation of an extremely stable $N\equiv N$ triple bond.

4. Carbocation reacts with water …

Start your 14-day free trial to unlock the full solution →

The Reaction

The compound is benzylamine ( $C_6H_5CH_2NH_2$ ).

When treated with nitrous acid ( $HNO_2$ ), the product is benzyl alcohol ( $C_6H_5CH_2OH$ ), along with nitrogen gas ( $N_2$ ).

Why?

Benzylamine is a primary aliphatic amine (the $NH_2$ is attached to a $CH_2$ group, not directly to the benzene ring).

$HNO_2$ converts primary aliphatic amines into diazonium salts, which are unstable and spontaneously decompose to give a carbocation. This carbocation reacts with water to form an alcohol.

The balanced equation:

C_6H_5CH_2NH_2 + HNO_2 \rightarrow C_6H_5CH_2OH + N_2 + H_2O

Common Mistakes & How to Avoid Them

1. ✗ Mistaking benzylamine for an aromatic amine

Error: Students think the $NH_2$ is attached directly to the benzene ring (like aniline), so they predict a diazonium salt as the product.
Why it’s wrong: In benzylamine, the $NH_2$ is on a side chain — it’s aliphatic, not aromatic. Aromatic diazonium salts are stable at low temperatures; aliphatic ones decompose instantly.
How to avoid: Always check where the $NH_2$ is attached. If it’s on a carbon that is part of an alkyl chain (even if that chain is attached to a ring), treat it as aliphatic.

2. ✗ Forgetting that $N_2$ gas is released

Error: Writing only the alcohol as the product, omitting nitrogen gas.
Why it’s important: $N_2$ evolution is a key test for primary aliphatic amines — it’s often asked in exams.
How to avoid: Memorize: primary aliphatic amine + $HNO_2$ → alcohol + $N_2$ + $H_2O$ . Always include $N_2$ in the product list.

3. ✗ Writing the wrong alcohol

Error: Writing phenol ( $C_6H_5OH$ ) instead of benzyl alcohol.
Why it’s wrong: The carbocation forms on the $CH_2$ group, not on the ring. Water attacks that carbon, giving $C_6H_5CH_2OH$ .
How to avoid: Track the carbon that originally held the $NH_2$ — that’s where the $OH$ ends up.

4. ✗ Confusing with the reaction of aniline

Error: Applying the same logic as for aniline ( $C_6H_5NH_2$ ), which gives a stable diazonium salt at 0–5°C.
Why it’s wrong: Aniline is an aromatic primary amine — its diazonium salt is stable in cold conditions. Benzylamine is aliphatic, so no stable diazonium salt forms.
How to avoid: Distinguish clearly:
- Aromatic primary amine → stable diazonium salt (cold) …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

COMEDK 2026Set 2026-A1 markMCQ
$\text { A compound }[X] \text { undergoes reactions as given. Identify compounds }[C] \text { and }[D] \text { formed in these reactions. }$
(ii) } \mathrm{Na}2 \mathrm{CO}{3(\text { aq })}+\mathrm{I}_2]{\text { (i)aq. } \mathrm{KOH}} [\mathrm{D}] \quad+\mathrm{CH}_3 \mathrm{COONa} $(A)$ \text { [C]: Benzoquinone [D]: lodoform } $(B) [C]: Benzene [D]: 2-iodo-propane (C) [C]: Benzoic acid [D]: lodoform (D)$ \text { [C]: 4-lodophenol [D]: 1-iodo-propane } $$
›Reveal solutionSolution
The compound [X] is isopropyl phenyl ether (C₆H₅–O–CH(CH₃)₂). Cleavage with concentrated HI gives phenol ([A]) and isopropyl iodide ([B]). Oxidation of phenol yields benzoquinone ([C]), and the iodoform reaction on isopropyl iodide gives iodoform ([D]) and sodium acetate. Thus the correct option is (A).

Concept & Intuition

This problem tests two classic organic reactions: ether cleavage by HI and the iodoform reaction. The key is to recognize that the ether [X] is an aryl alkyl ether (phenol derivative). When treated with concentrated HI, the C–O bond breaks selectively at the alkyl side (since the aryl–O bond is stronger due to resonance), producing phenol and an alkyl iodide. Then, phenol can be oxidized to benzoquinone, and the alkyl iodide (if it has a methyl group adjacent to the carbonyl or a secondary alcohol that can be oxidized to a methyl ketone) will undergo the iodoform test.

Let’s walk through each step.

Step-by-step reasoning

Identify [X] and its cleavage products

The figure shows a benzene ring with an –O–CH(CH₃)₂ group. That is isopropyl phenyl ether (C₆H₅–O–CH(CH₃)₂).

With concentrated HI, the ether bond breaks. The mechanism: HI protonates the oxygen, then iodide attacks the less hindered carbon (the isopropyl carbon, since it’s primary-like in the sense of being less sterically hindered than the aromatic ring). This gives phenol (C₆H₅OH) as the aromatic product [A] and isopropyl iodide (CH₃–CHI–CH₃) as [B].

Watch out

A common mistake is to think the aromatic ring gets iodinated. But under these conditions, the C–O bond on the alkyl side breaks, not the aryl–O bond. The aromatic ring remains intact as phenol.

Reaction of [A] (phenol) with Cr₂O₇²⁻/H⁺ → [C]

Phenol is easily oxidized. Chromic acid (Cr₂O₇²⁻/H⁺) is a strong oxidizing agent. It oxidizes phenol to 1,4-benzoquinone (often just called benzoquinone). The reaction involves two-electron oxidation: the –OH group becomes a carbonyl, and the ring is rearranged to a quinoid structure.

So [C] = Benzoquinone.

Reaction of [B] (isopropyl iodide) with (i) aq. KOH, then (ii) Na₂CO₃(aq) + I₂ → [D] + CH₃COONa

Step (i): Aqueous KOH will hydrolyze the alkyl iodide to an alcohol. Isopropyl iodide gives isopropyl alcohol (propan-2-ol, CH₃–CHOH–CH₃). …
Start your 14-day free trial to see the full solution →
KCET 2025Set D-41 markMCQ
$Q. Match the compounds given in List - I with the items given in List - II. List - I (I) Benzenesulphonyl Chloride (II) Sulphanilic acid (III) Alkyl Diazonium salts (IV) Aryl Diazonium salts List - II$
(a) Zwitterion
(b) Hinsberg reagent
(c) Dyes
(d) Conversion to alcohols (A) 1 – c, II – b, III – a, IV – d (B) 1 – a, II – c, III – b, IV – d (C) 1 – c, II – a, III – d, IV – b (D) 1 – b, II – a, III – d, IV – c
›Reveal solutionSolution

Benzenesulphonyl chloride = Hinsberg reagent, sulphanilic acid = zwitterion, alkyl diazonium salts → alcohols, aryl diazonium salts → azo dyes.

Step 1 — (I) Benzenesulphonyl chloride → (b) Hinsberg reagent.

$\mathrm{C_6H_5SO_2Cl}$ is known as Hinsberg's reagent. It reacts with 1° amines to give a sulphonamide with an acidic N–H (soluble in alkali), with 2° amines to give a sulphonamide with no N–H (insoluble in alkali), and does not react with 3° amines — the classical test for distinguishing the three classes.

Step 2 — (II) Sulphanilic acid → (a) Zwitterion.

The $-\mathrm{SO_3H}$ group is strongly acidic and the $-\mathrm{NH_2}$ group is basic, so an internal proton transfer occurs:
$\mathrm{H_2N{-}C_6H_4{-}SO_3H} \;\rightleftharpoons\; \mathrm{{}^+H_3N{-}C_6H_4{-}SO_3^-}$
This dipolar internal salt is a zwitterion (which is why sulphanilic acid has a high melting point and low solubility in organic solvents).

Step 3 — (III) Alkyl diazonium salts → (d) Conversion to alcohols.

Alkyl diazonium ions ( $\mathrm{R{-}N_2^+}$ ) are extremely unstable because $\mathrm{N_2}$ is an excellent leaving group and there is no resonance stabilisation. They decompose at once, and water traps the resulting carbocation: …
Start your 14-day free trial to see the full solution →
KCET 2024Set B-21 markMCQ
$\xrightarrow{\mathrm{NaNO_2}/\mathrm{dil. HCl}}$
›Reveal solutionSolution
Diazotisation of aniline gives the benzenediazonium salt (P); azo-coupling of that weak electrophile with phenoxide occurs at the para position, so Q is para-hydroxyazobenzene.

1. Step 1 — Diazotisation gives P

A primary aromatic amine treated with nitrous acid (generated in situ from $\mathrm{NaNO_2 + dil.\ HCl}$ ) at 273–278 K gives an arenediazonium salt:
$\mathrm{C_6H_5NH_2} \xrightarrow[\;273-278\ \mathrm{K}\;]{\mathrm{NaNO_2/dil.\ HCl}} \mathrm{C_6H_5\overset{+}{N}\equiv N\ Cl^{-}}$
So $\mathbf{P} =$ benzenediazonium chloride. (The aryl diazonium ion is stabilised by delocalisation into the ring — this is why it survives, unlike an alkyl diazonium ion.) Note that option (A) is P, not Q — a classic distractor.

2. Step 2 — Azo coupling gives Q

The diazonium ion is only a weak electrophile, so it can attack a ring only if that ring is strongly activated. Phenol in NaOH is deprotonated to the phenoxide ion, $\mathrm{C_6H_5O^-}$ , whose $-\mathrm{O^-}$ is a very powerful electron-releasing group (strong $+M$ ), pumping electron density onto the ortho and para carbons.

Electrophilic substitution therefore occurs at those positions, but coupling takes place essentially exclusively at the para position because:

the para carbon is sterically unhindered, whereas an ortho attack would place the bulky $\mathrm{-N=N-C_6H_5}$ group right next to the $-\mathrm{OH}$ ;

the para-coupled azo product is the thermodynamically favoured, fully conjugated dye. …
Start your 14-day free trial to see the full solution →
COMEDK 2023Set 2023-M1 markMCQ
$Q. Identify A, B and C. (A) (B) (C) (D)$
›Reveal solutionSolution
The reaction scheme shows a neopentyl bromide undergoing SN1 (to B), SN2 (to A), and elimination (to C). The correct products are: A = neopentyl ethyl ether, B = 2-ethoxy-2-methylbutane (rearranged), C = 2-methyl-2-butene. Only option (A) matches all three.

Concept & Intuition

Neopentyl bromide (1-bromo-2,2-dimethylpropane) is a classic case where the substrate’s structure dictates reaction pathways. The carbon bearing bromine is primary, but it’s attached to a quaternary carbon (three methyl groups). For SN2, the backside attack is severely hindered by the bulky neopentyl group, making it very slow. For SN1, the primary carbocation would normally be unstable, but under solvolytic conditions (ethanol), the reaction proceeds via a rearranged tertiary carbocation (a methyl shift), giving a more stable intermediate. Elimination also favors the more substituted alkene (Zaitsev product). The question tests recognition of these rearrangements and the correct structures.

Step-by-step reasoning

Identify the substrate The central structure is neopentyl bromide:

$\text{CH}_3\text{–C(CH}_3)_2\text{–CH}_2\text{Br}$
The bromine is on a primary carbon, but the carbon is neopentyl (tert-butylmethyl). This is crucial.

SN2 pathway (→ A) SN2 requires a clean backside attack. The neopentyl group is extremely bulky, so SN2 is very slow. However, in ethanol (C₂H₅OH) as solvent, the ethoxide ion (from ethanol) can act as a nucleophile. The product is the unrearranged ethyl ether:

$\text{CH}_3\text{–C(CH}_3)_2\text{–CH}_2\text{–O–C}_2\text{H}_5$
This is neopentyl ethyl ether. No rearrangement occurs because SN2 is concerted.

Check options: Only option (A) shows this exact structure for A.

SN1 pathway (→ B) SN1 proceeds via carbocation formation. The primary carbocation (CH₃–C(CH₃)₂–CH₂⁺) is very unstable. It immediately undergoes a 1,2-methyl shift to form the more stable tertiary carbocation:

$\text{CH}_3\text{–C}^+(\text{CH}_3)\text{–CH}_2\text{CH}_3$
This tertiary carbocation is then trapped by ethanol (solvent) to give the ethyl ether:
$\text{CH}_3\text{–C(OC}_2\text{H}_5)(\text{CH}_3)\text{–CH}_2\text{CH}_3$
This is 2-ethoxy-2-methylbutane.

Check options: Only option (A) shows B as exactly this structure (with OC₂H₅ on the quaternary carbon and an ethyl group on the adjacent carbon).

Elimination pathway (→ C) …
Start your 14-day free trial to see the full solution →
KCET 2022Set B-31 markMCQ
$_2$
›Reveal solutionSolution
A secondary amine is defined by the number of alkyl/aryl groups attached to nitrogen — specifically, two organic groups replace two hydrogens of ammonia. The correct answer is (B).

The key to this question is understanding how amines are classified. Amines are derivatives of ammonia ( $\text{NH}_3$ ), and the classification — primary, secondary, or tertiary — depends entirely on how many of the three hydrogen atoms on nitrogen have been replaced by carbon-containing groups (alkyl or aryl). It has nothing to do with the position of a carbon atom, the number of carbon atoms in the molecule, or the count of $\text{NH}_2$ groups.

Let’s examine each option carefully.

Option (A) says “a compound with an $\text{NH}_2$ group on the carbon atom in number 2 position.” This describes a structural detail about where an amino group is attached on a carbon chain (like on C-2 of propane). That is a matter of positional isomerism, not amine classification. A primary amine can have its $\text{NH}_2$ on carbon-2, and so can a secondary or tertiary amine if they also have other groups. This definition misses the point entirely.

Option (B) says “a compound in which 2 of the hydrogen of $\text{NH}_3$ have been replaced by organic groups.” This is exactly the definition. Ammonia has three hydrogens. Replace one → primary amine ( $\text{RNH}_2$ ). Replace two → secondary amine ( $\text{R}_2\text{NH}$ ). Replace three → tertiary amine ( $\text{R}_3\text{N}$ ). So a secondary amine has two alkyl/aryl groups attached to nitrogen, with one hydrogen remaining. …
Start your 14-day free trial to see the full solution →
COMEDK 2021Set 2021-B1 markMCQ
$Q. What are the products formed when Anisole is reacted with Hydroiodic acid and heated? (A) Iodobenzene + Methane (B) Phenol + Methanol (C) Phenol + Iodomethane (D) Iodobenzene + Methanol$
›Reveal solutionSolution

Anisole $C_6H_5-O-CH_3 + HI \to C_6H_5OH$ (phenol) $+ CH_3I$ (iodomethane).

In cleavage of aryl alkyl ethers by $HI$ , the bond broken is the $O-alkyl$ bond, not the $O-aryl$ bond, because forming an aryl cation/attack at the aromatic carbon is very unfavourable. $I^-$ attacks the methyl carbon ( $S_N2$ ), …
Start your 14-day free trial to see the full solution →
KCET 2019Set A-11 markMCQ
$\mathrm{NO_2}$
›Reveal solutionSolution

Li $^+$ is tiny and highly polarising, so it distorts the nitrate ion enough to break it right down to the oxide + $\mathrm{NO_2}$ ; the bigger alkali cations only take it as far as the nitrite.

Step 1 — The two possible decomposition routes

Alkali-metal nitrates decompose on heating by one of two paths:

Path 1 — to the nitrite (Na, K, Rb, Cs):
$2\mathrm{MNO_3} \xrightarrow{\;\Delta\;} 2\mathrm{MNO_2} + \mathrm{O_2}\uparrow$
Only oxygen is evolved — no brown fumes.

Path 2 — to the oxide (Li):
$4\mathrm{LiNO_3} \xrightarrow{\;\Delta\;} 2\mathrm{Li_2O} + 4\mathrm{NO_2}\uparrow + \mathrm{O_2}\uparrow$
Here the nitrate ion is destroyed completely, giving the characteristic brown $\mathrm{NO_2}$ gas.

Step 2 — Why lithium is the odd one out (Fajans' rules)

The polarising power of a cation scales as $\dfrac{\text{charge}}{(\text{radius})^2}$ . Among the alkali metals:
$\mathrm{Li^+ (76\ pm)} \;<\; \mathrm{Na^+ (102)} \;<\; \mathrm{K^+ (138)} \;<\; \mathrm{Rb^+ (152\ pm)}$
So $\mathrm{Li^+}$ is by far the smallest and therefore the most polarising. It pulls electron density out of the large, soft $\mathrm{NO_3^-}$ anion, weakening the N–O bonds so much that the anion breaks apart entirely into $\mathrm{O^{2-}}$ (which stays with Li as $\mathrm{Li_2O}$ ) and $\mathrm{NO_2}$ .

The larger cations $\mathrm{Na^+, K^+, Rb^+}$ cannot distort the nitrate that strongly. Their nitrates only shed one oxygen atom, stopping at the stable nitrite.

Step 3 — The wider pattern (worth remembering) …
Start your 14-day free trial to see the full solution →

←Previous questionQ29 — Why is -NH₂ group of aniline acetylated before carrying out nitration?→Next questionQ31 — What is the best reagent to convert nitrile to primary amine?

Q.What is the product when $C_6H_5CH_2NH_2$ reacts with $HNO_2$ ?

Concept understanding — Nucleophilic Substitution Reactions

Nucleophilic Addition – From Intuition to Precision

The Precise Statement

Why It Happens – The Driving Force

A Concrete Example – Addition of HCN to a Ketone

What Makes a Good Nucleophile?

Why this formula?

Nucleophilic Substitution Reactions: Why the Key Formulas Hold

1. The Two Main Mechanisms: A Tale of Timing

SN1: Unimolecular — The Leaving Group Goes First

SN2: Bimolecular — Simultaneous Attack and Departure

2. The Transition State: Why the Formulas Are Not Just "Given"

Concept and Intuition

Step-by-Step Solution

Concept: Diazotisation & Sandmeyer Reaction / Decomposition of Primary Amines

Why this method?

Steps of the method:

The Reaction

Common Mistakes & How to Avoid Them

1. ✗ Mistaking benzylamine for an aromatic amine

2. ✗ Forgetting that $N_2$ gas is released

3. ✗ Writing the wrong alcohol

4. ✗ Confusing with the reaction of aniline

1. Step 1 — Diazotisation gives P

2. Step 2 — Azo coupling gives Q

Step 1 — The two possible decomposition routes

Step 2 — Why lithium is the odd one out (Fajans' rules)

Step 3 — The wider pattern (worth remembering) …

Q.What is the product when C6H5CH2NH2C_6H_5CH_2NH_2C6​H5​CH2​NH2​ reacts with HNO2HNO_2HNO2​?

Concept and Intuition

Step-by-Step Solution

🎓Unlock everything free for 14 days

Q.What is the product when $C_6H_5CH_2NH_2$ reacts with $HNO_2$ ?

Unlock everything free for 14 days