The electric dipole placed in uniform electric fie – 2nd PUC Physics | ConceptFirst

Question of 67

Q. The electric dipole placed in uniform electric field is unstable, if the angle between electric field and dipole moment is

(a)

0^\circ

(b)

60^\circ

(c)

90^\circ

(d)

180^\circ

Karnataka PUCKarnataka II PUC Board 2024MCQ· 1mImportance★★★★★

0% · 0/67 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Electric Dipole in a Field

Electric Dipole in a Uniform Field — First Look

Imagine you have a tiny bar magnet. If you place it in a uniform magnetic field, it doesn't get pulled anywhere — but it does twist to align with the field. An electric dipole behaves in exactly the same way when placed in a uniform electric field.

An electric dipole is simply a pair of equal and opposite charges, $+q$ and $-q$ , separated by a small distance $d$ . Think of it as a tiny "stretched" charge. The dipole has a dipole moment $\vec{p}$ , a vector that points from the negative charge to the positive charge, with magnitude $p = qd$ .

Now place this dipole in a uniform electric field $\vec{E}$ . Uniform means the field has the same strength and direction everywhere in that region.

What happens? Two forces, one twist

The positive charge feels a force $F_+ = +qE$ in the direction of the field. The negative charge feels a force $F_- = -qE$ opposite to the field. These two forces are equal in magnitude but opposite in direction — so they cancel out as far as net force is concerned. The dipole as a whole does not accelerate linearly.

But the forces are not along the same line. They are separated by the distance $d$ , so they form a couple — a pair of equal, opposite, parallel forces that produce a torque. This torque tries to rotate the dipole so that its dipole moment $\vec{p}$ aligns with the field $\vec{E}$ .

Note

No net force means the centre of mass of the dipole stays put. Only rotation happens.

The torque formula

Let the dipole make an angle $\theta$ with the field direction (so $\theta = 0$ when $\vec{p}$ and $\vec{E}$ point the same way). The lever arm for each force about the centre is $(d/2)\sin\theta$ . The torque from each force is $F \times \text{lever arm} = qE \cdot (d/2)\sin\theta$ . Since both forces contribute in the same rotational sense, the total torque is:

\tau = 2 \cdot qE \cdot \frac{d}{2}\sin\theta = qd\,E\sin\theta

But $qd = p$ , the dipole moment. So:

\tau = pE\sin\theta

The direction of the torque is such that it tries to reduce $\theta$ — to bring $\vec{p}$ into alignment with $\vec{E}$ . In vector form:

\vec{\tau} = \vec{p} \times \vec{E}

What does this mean physically?

When $\theta = 0$ (dipole aligned with field), $\sin 0 = 0$ , so torque is zero. This is the stable equilibrium position.
When $\theta = 90^\circ$ (dipole perpendicular to field), torque is maximum: $\tau_{\text{max}} = pE$ . …

Start your 14-day free trial to unlock the full solution →

(d) $180^\circ$ …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

Showing the 12 most recent of 16 on this concept.

CBSE 2026Set ANNUAL1 markMCQ
$Q. The size of ideal dipole is :$
(a) Zero
(b) Infinite
(c) One
(d) None of the above
›Reveal solutionSolution

An ideal dipole is the point-dipole limit: separation → 0 with dipole moment finite, so its size is zero.

An electric dipole consists of two equal and opposite charges +q and −q separated by a small distance 2a, with dipole moment p = q(2a). An 'ideal' (or point) dipole is the mathematical limit in which the separation 2a is made vanishingly small (2a → 0) while simultaneously making q very large …

Start your 14-day free trial to see the full solution →
CBSE 2025Set X11 mark
$Q. An electric dipole placed in a uniform electric field experiences a net ________.$
›Reveal solutionSolution

torque In a uniform field the forces on the two charges of the dipole are equal and opposite, so the net force is zero, but they act along different lines and constitute a couple that produces a …

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 mark
$+q$
(i) Write the unit of electric dipole moment.
›Reveal solutionSolution

Dipole moment $p=q\times2a$ has units of charge $\times$ distance.

The electric dipole moment is defined as $p = q\times(2a)$ , the product of the magnitude of either charge and the separation between the two charges. Since charge is measured in coulombs (C) and separation in metres (m), the SI unit …

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 mark
$+q$
(iii) What is polar molecule?
›Reveal solutionSolution

Polar molecules have a built-in charge asymmetry that gives them a permanent dipole moment.

A polar molecule is one in which the centre of the positive charge distribution and the centre of the negative charge distribution do not coincide, due to the asymmetric arrangement of atoms and the unequal sharing of electrons between them (unequal electronegativities). As a result, such a molecule possesses a permanent (built-in) electric dipole moment, which exists even in the absence of any external electric field. Common examples include water (H₂O), HCl, and NH₃. This is in contrast to a non-polar molecule (like $\text{O}_2$ or $\text{CO}_2$ ), where the positive and negative charge centres coincide, giving zero perma …

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 mark
$Q. Define the electric dipole moment.$
›Reveal solutionSolution

An electric dipole moment measures the strength and orientation of a pair of equal and opposite charges separated by a small distance.

An electric dipole consists of two equal and opposite point charges $+q$ and $-q$ separated by a small distance $2a$ . Its electric dipole moment is defined as the vector:

$\vec{p} = q(2\vec{a})$

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. What orientation of an electric dipole in uniform electric field is said to be in stable equilibrium ?$
(a) θ = 0
(b) θ = 90
(c) θ = 120
(d) θ = 180
›Reveal solutionSolution
A dipole is in stable equilibrium when its dipole moment is parallel to the field, i.e. θ = 0°.

The torque on a dipole in a uniform field is $\tau = pE\sin\theta$ , and its potential energy is $U = -pE\cos\theta$ .

Both θ = 0° and θ = 180° give zero torque (equilibrium positions), but they are not equally stable:

At θ = 0°, $U = -pE$ (minimum energy) → any small angular displacement creates a restoring torque that brings p back to alignment with E. This is stable equilibrium. …
Start your 14-day free trial to see the full solution →
CBSE 2024Set A11 markMCQ
$Q. The electric dipole placed in uniform electric field is unstable, if the angle between electric field and dipole moment is$
(a) $0^\circ$
(b) $60^\circ$
(c) $90^\circ$
(d) $180^\circ$
›Reveal solutionSolution

(d) $180^\circ$ …

Start your 14-day free trial to see the full solution →
CBSE 2024Set IMPROVEMENT1 markMCQ
$_2$
(a) Both A and R are correct and R is the correct explanation of A.
(b) Both A and R are correct but R is not the correct explanation of A.
(c) A is correct but R is incorrect.
(d) Both A and R are incorrect.
›Reveal solutionSolution

Water is a polar molecule because its bent geometry separates the centres of positive and negative charge, giving it a permanent dipole moment.

Assertion (A) is correct: the water molecule H $_2$ O possesses a permanent electric dipole moment even without any external field, because it is a polar molecule. Reason (R) is also correct: a permanent dipole moment arises in molecules whose positive and negative charge centres do not coincide — in H $_2$ O, the bent (non-linear) shape of the molecule means the centre of the negative charge (near the oxygen) does …

Start your 14-day free trial to see the full solution →
CBSE 2023Set F1 markMCQ
$Q. What is the angle between the electric dipole moment P and the electric field strength E when the dipole is in a stable equilibrium? (A) pi/4 (B) pi (C) pi/2 (D) 0$
›Reveal solutionSolution
Stable equilibrium ⇒ P parallel to E ⇒ angle = 0.

The potential energy of a dipole in a uniform field is $U = -pE\cos\theta$ , and the torque is $\tau = pE\sin\theta$ .

At $\theta = 0$ : $\tau = 0$ and $U = -pE$ (minimum energy) → stable equilibrium. …
Start your 14-day free trial to see the full solution →
CBSE 2022Set M1 mark
$Q. Define 'electric dipole moment'.$
›Reveal solutionSolution

Dipole moment = charge × separation, directed −q → +q.

An electric dipole is a pair of equal and opposite charges $+q$ and $-q$ separated by a small distance $2a$ .

The electric dipole moment is defined as the product of the magnitude of either charge and the distance of separation between them:

$\vec{p} = q \,(2\vec{a})$ …
Start your 14-day free trial to see the full solution →
CBSE 2022Set ANNUAL1 mark
$Q. Write SI unit and dimensional formula of electric dipole moment.$
›Reveal solutionSolution

Electric dipole moment p = q × 2a; its unit follows directly from charge × length, and its dimensional formula follows from [charge] = [A T] and [length] = [L].

The electric dipole moment of a pair of equal and opposite charges +q and −q separated by a distance 2a is defined as

$p = q \times 2a$

directed from the negative to the positive charge.

SI unit: Since q is in coulomb (C) and 2a is in metre (m), the unit of p is coulomb-metre (C·m).

…

Start your 14-day free trial to see the full solution →
CBSE 2021Set ANNUAL1 mark
$Q. Whether electric dipole moment is a vector or a scalar quantity? Write the SI unit of electric dipole moment.$
›Reveal solutionSolution

Dipole moment has both magnitude and direction (from negative to positive charge), so it is a vector, measured in C·m.

An electric dipole consists of two equal and opposite charges $+q$ and $-q$ separated by a distance $2a$ . Its dipole moment is defined as

$\vec{p} = q(2a)\,\hat{n}$ …

Start your 14-day free trial to see the full solution →