Q.The standard potential of the electrode, Zn2+ (0.02 M) ∣Zn (s) is - 0.76 V. Calculate its potential.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Nernst Equation
The Nernst Equation: Why Batteries Don't Always Give Their Rated Voltage
Imagine you have a fresh AA battery. It says 1.5 V on the side. But if you measure it with a voltmeter, you might get 1.58 V when it's new, and 1.2 V when it's almost dead. Why does the voltage change? The Nernst equation is the tool that tells you exactly why.
The Core Idea: Concentration Drives Voltage
Every electrochemical cell works because of a chemical reaction that wants to happen. But here's the key: how badly the reaction wants to happen depends on how much of each chemical is present.
Think of it like a slope. A steep hill gives you more energy when you roll down. A shallow hill gives you less. In a battery, the "hill" is the difference in concentration (or more precisely, activity) of ions between the two electrodes. When the battery is fresh, the hill is steep — lots of reactants, few products. As the battery runs, reactants get used up, products build up, the hill flattens, and the voltage drops.
The Nernst equation is the mathematical formula that calculates the exact voltage for any given set of concentrations.
The Precise Statement
For a general electrochemical reaction:
aA+bB→cC+dD
The cell potential E under non-standard conditions is:
E=E∘−nFRTlnQ
Where:
- E = cell potential under the given conditions (what you actually measure)
- E∘ = standard cell potential (the voltage when all reactants and products are at 1 M concentration, 1 atm pressure, 25°C)
- R = universal gas constant (8.314 J/mol·K)
- T = temperature in Kelvin
- n = number of moles of electrons transferred in the balanced reaction
- F = Faraday constant (96,485 C/mol)
- Q = reaction quotient = [A]a[B]b[C]c[D]d (using concentrations for now)
At 25°C (298 K), the constants combine into a simpler form:
E=E∘−n0.0592log10Q
The 0.0592 comes from F2.303RT at 298 K. The 2.303 converts natural log to base-10 log, which is more convenient for calculations.
What It Actually Means
The equation has three parts:
-
E∘ — the "ideal" voltage when everything is at standard conditions. This is what you'd get in a textbook table.
-
nFRT — a scaling factor. It tells you how sensitive the voltage is to concentration changes. More electrons transferred (n) means less sensitivity.
-
lnQ — the "concentration penalty". When Q is small (lots of reactants, few products), lnQ is negative, so E is higher than E∘. When Q is large (products building up), lnQ is positive, so E drops below E∘.
A Concrete Example
Consider the Daniell cell: Zn∣Zn2+∣∣Cu2+∣Cu
The reaction is: Zn+Cu2+→Zn2++Cu
E∘=1.10 V, n=2
If [Cu2+]=0.1 M and [Zn2+]=1.0 M:
Q=[Cu2+][Zn2+]=0.11.0=10
E=1.10−20.0592log10(10)=1.10−0.0296×1=1.07 V …
For the electrode reduction Zn2+ + 2e− → Zn, the Nernst equation is EZn=EZn0−20.0592log10[Zn2+]1. …
EZn=EZn0+20.0592log10[Zn2+] with log10(0.02)=−1.6990 gives −0.76−0.0503=−0.81 V.
Step 1. Electrode reaction: Zn2+ (0.02M)+2e−⟶Zn (s), n = 2.
Step 2. Nernst equation for the electrode: EZn=EZn0−n0.0592log10[Zn2+]1=EZn0+20.0592log10[Zn2+].
Step 3. log10(0.02)=−1.6990, so the correction term is 20.0592×(−1.6990)=−0.0503 V. …
Apply the single-electrode Nernst equation for the reduction Zn2+ + 2e- -> Zn: the log term is 1/[Zn2+], equ …
- Sign error on the log term: log10(1/0.02) = +1.699 subtracted, or log10(0.02) = -1.699 added -- both give -0.81 V; mixing the two conventions gives -0.71 V, wrong.
- Using n = 1 for the divalent zinc reduction. …
- CBSE 2025Set 56/4/11 markMCQQ.In an electrochemical cell, the following reaction takes place : 2Cu+(aq)+Zn(s)→2Cu(s)+Zn2+(aq) Ecell∘=1⋅28 V As the reaction progresses, what will happen to the overall voltage of the cell ? (A) Voltage will remain constant. (B) It will decrease as [Zn2+] increases. (C) It will increase as [Cu+] increases. (D) It will increase as [Zn2+] increases.
›Reveal solutionSolution
The cell voltage depends on the reaction quotient via the Nernst equation. As the reaction proceeds, [Zn2+] increases and [Cu+] decreases, so the voltage decreases. The correct option is (B).
The Nernst equation tells us that the actual voltage of an electrochemical cell under non-standard conditions is:
Ecell=Ecell∘−n0.059logQ
where Q is the reaction quotient. For the given reaction:
2Cu+(aq)+Zn(s)→2Cu(s)+Zn2+(aq)
the reaction quotient is:
Q=[Cu+]2[Zn2+]
(Remember: pure solids like Zn and Cu have activity = 1, so they don’t appear in Q.)
The number of electrons transferred, n, is 2 (each Cu⁺ gains one electron, and two Cu⁺ ions are reduced; Zn loses two electrons).
So the Nernst equation becomes:
Ecell=1.28−20.059log[Cu+]2[Zn2+]
Now, as the reaction progresses:
- [Zn2+] increases — Zn metal is oxidised to Zn²⁺, so its concentration in solution rises.
- [Cu+] decreases — Cu⁺ ions are reduced to Cu metal, so their concentration falls.
- Both changes make the fraction [Cu+]2[Zn2+] larger.
- A larger Q means logQ is larger (more positive).
- Since we subtract this term, Ecell decreases.
Watch outA common mistake is to think that because [Zn2+] appears in the numerator, the voltage might increase. But the Nernst equation has a minus sign in front of the log term — so anything that increases Q actually lowers the voltage. …
- CBSE 2024Set ANNUAL1 markQ.In an electrochemical cell the free energy change is related to EMF of the cell as ______.
›Reveal solutionSolution
The free energy change of a cell reaction is related to its EMF by Delta G = -nFE, which is the thermodynamic basis for the Nernst equation.
The electrical work done by a galvanic cell is equal to the product of the total charge passed and the EMF of the cell. The total charge passed when n moles of electrons flow is nF (F = Faraday constant = 96500 C/mol).
Maximum electrical work obtainable = nFE (E = EMF of the cell)
This maximum work done by the system equals the decrease in Gibbs free energy of the system, so:
Delta G = -nFE
…
- CBSE 2021Set A1 markMCQQ.The Electromotive force (EMF) of the cell for the cell reaction at equilibrium state is(a) positive(b) zero(c) negative(d) none of these
›Reveal solutionSolution
At equilibrium a galvanic cell is fully discharged, so its EMF = 0.
As a galvanic cell operates, the concentrations change until the reaction reaches equilibrium (the cell is 'dead').
From the Nernst equation: Ecell = E°cell − (0.059/n) log Q.
At equilibrium Q = K and Ecell = 0, giving the relation E°cell = (0.059/n) log K.
…
- CBSE 2020Set ANNUAL1 markQ.What is the relation between standard Gibbs' free energy and standard emf of the cell?
›Reveal solutionSolution
The standard Gibbs free energy change of a cell reaction is related to the standard cell emf by ΔG∘=−nFEcell∘.
The maximum electrical work obtainable from a galvanic cell equals the decrease in Gibbs free energy of the cell reaction. The electrical work done is the product of the total charge passed (nF, where n is the number of moles of electrons transferred in the balanced cell reaction and F is Faraday's constant, 96500 C/mol) and the cell's emf:
Electrical work = nFE_cell
Since this work is done at the expense of the free energy of the system, ΔG=−nFEcell, and under standard conditions:
…
- CBSE 2020Set ANNUAL1 markQ.How is equilibrium constant related to standard Gibb's energy?
›Reveal solutionSolution
The standard Gibbs energy change of a reaction and its equilibrium constant are linked by ΔG∘=−RTlnK.
For any reaction at equilibrium, thermodynamics gives the relation
ΔG∘=−RTlnK=−2.303RTlogK
where R is the gas constant, T the absolute temperature, and K the equilibrium constant.
This connects directly to electrochemistry through the Nernst equation. Since ΔG∘=−nFEcell∘ (where n = number of electrons transferred, F = Faraday constant, Ecell∘ = standard cell potential), equating the two expressions for ΔG∘ gives
−nFEcell∘=−RTlnK⇒Ecell∘=nFRTlnK=n0.0591logK (at 298 K)
…
- CBSE 2019Set ANNUAL1 markQ.Write the Nernst equation for following cell: Sn(s) | Sn²⁺ || H⁺ | H₂(g)(1bar) | Pt(s).
›Reveal solutionSolution
For the cell Sn(s) | Sn²⁺ || H⁺ | H₂(g)(1 bar) | Pt(s), n = 2 and the Nernst equation is Ecell=Ecell∘−20.0591log[H+]2[Sn2+]pH2.
From the cell notation, the left electrode (Sn) is the anode (oxidation) and the right electrode (Pt, with H₂/H⁺) is the cathode (reduction):
Anode (oxidation): Sn(s)→Sn2+(aq)+2e−
Cathode (reduction): 2H+(aq)+2e−→H2(g)
Overall cell reaction: Sn(s)+2H+(aq)→Sn2+(aq)+H2(g)
Here the number of electrons transferred, n=2.
The general Nernst equation is Ecell=Ecell∘−n0.0591logQ, where Q is the reaction quotient (products over reactants, each raised to its stoichiometric coefficient, gases as partial pressure, solids/pure liquids omitted):
Q=[H+]2[Sn2+]pH2
So:
…
- CBSE 2019Set ANNUAL1 markMCQQ.The electrode potential of any electrode does not depend on(a) the nature of metal and its ions(b) concentration of ions present in solution(c) pressure(d) temperature
›Reveal solutionSolution
By the Nernst equation, electrode potential depends on the nature of the metal/ions, their concentration and temperature, but not on pressure (for a metal electrode), so option (c).
The potential of an electrode is governed by the Nernst equation:
E = E° - (RT/nF) ln (1/[M^n+])
From this and the nature of the half-cell:
- It depends on the nature of the metal and its ions (through E°).
- It depends on the concentration of the ions in solution (the [M^n+] term). …
- CBSE 2018Set ANNUAL1 markMCQQ.For HO-C6H4-OH ⇌ O=C6H4=O + 2H+ + 2e-, E° = 1.30 V. At pH = 2, Electrode potential is -(a) 1.36 V(b) 1.30 V(c) 1.42 V(d) 1.20 V
›Reveal solutionSolution
E = E° + 0.059·pH for this couple → 1.30 + 0.118 = 1.42 V.
For the quinhydrone-type couple written as H₂Q ⇌ Q + 2H⁺ + 2e⁻ (n = 2), the Nernst equation for the reaction as written is
E = E° − (0.059/2)·log([Q][H⁺]²/[H₂Q]).
Taking activities of quinone and hydroquinone as unity: …
- CBSE 2016Set ANNUAL1 markQ.Write an equation for the relation between standard free energy change and standard cell potential.
›Reveal solutionSolution
Standard free energy change and standard cell potential are linked by ΔG∘=−nFEcell∘.
The maximum electrical work obtainable from a galvanic cell equals the decrease in Gibbs free energy of the cell reaction. Electrical work done = charge × potential = nFEcell∘, and since this work is done by the system (free energy decreases), we get
ΔG∘=−nFEcell∘
…
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.