Derive the expression for resultant capacitance, when capacitors are connected in series.

Question 102 of 122

Q. Derive the expression for resultant capacitance, when capacitors are connected in series.

Puducherry TnboardTamil Nadu HSC (DGE) Board 2022Subjective· 3mImportance★★★★★

84% · 102/122 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Capacitor Network Analysis

Capacitor Network Analysis

Imagine you have a bucket of water and a pipe. The bigger the bucket, the more water it can hold for a given water pressure. A capacitor does the same thing with electric charge — it stores charge when a voltage is applied. The "size" of the bucket is called capacitance ( $C$ ), measured in farads (F).

Now, what happens when you connect several buckets together with pipes? That's a capacitor network. The analysis is about finding one equivalent bucket (a single capacitor) that behaves exactly like the whole network.

The Core Idea: Charge and Voltage Must Match

When you connect capacitors, two things are always true:

Charge conservation: Total charge in a closed part of the circuit stays the same unless a battery pushes more in.
Voltage is shared: The voltage across each capacitor depends on how they're wired.

There are only two basic ways to connect them. Everything else is a combination of these two.

Series Connection: One Path, Shared Charge

Connect capacitors end-to-end, like train cars. The same current flows through each, so each capacitor stores the same amount of charge $Q$ .

But the total voltage across the combination is the sum of the individual voltages:

V_{\text{total}} = V_1 + V_2 + V_3 + \dots

Since $V = Q/C$ for each capacitor, we get:

\frac{Q}{C_{\text{eq}}} = \frac{Q}{C_1} + \frac{Q}{C_2} + \frac{Q}{C_3} + \dots

Cancel $Q$ (it's the same everywhere):

\frac{1}{C_{\text{eq}}} = \frac{1}{C_1} + \frac{1}{C_2} + \frac{1}{C_3} + \dots

Intuition: Adding capacitors in series makes the equivalent capacitance smaller than the smallest individual one. Why? Because you're effectively making the "bucket" longer and narrower — harder to fill.

Watch out

A common mistake: students treat series capacitors like series resistors (adding reciprocals for resistors, but adding directly for capacitors). It's the opposite. For resistors in series: $R_{\text{eq}} = R_1 + R_2$ . For capacitors in series: $1/C_{\text{eq}} = 1/C_1 + 1/C_2$ .

Parallel Connection: Multiple Paths, Same Voltage

Connect capacitors side by side, like buckets with their bottoms connected by a wide pipe. Each capacitor sees the same voltage $V$ across it.

But the total charge stored is the sum of charges on each:

Q_{\text{total}} = Q_1 + Q_2 + Q_3 + \dots

Since $Q = CV$ for each:

C_{\text{eq}} V = C_1 V + C_2 V + C_3 V + \dots

Cancel $V$ :

C_{\text{eq}} = C_1 + C_2 + C_3 + \dots

Intuition: Adding capacitors in parallel makes the equivalent capacitance larger — you're just adding more bucket area. Easy to fill.

Tip

| Connection | Equivalent Formula | What happens to $C_{\text{eq}}$ |

|------------|-------------------|----------------------------------|

| Series | $1/C_{\text{eq}} = \sum 1/C_i$ | Gets smaller than smallest |

| Parallel | $C_{\text{eq}} = \sum C_i$ | Gets larger than largest |

How to Analyze Any Network

Spot the pattern: Look for capacitors that are clearly in series (only two terminals, no branching between them) or clearly in parallel (both ends connected together).
Replace step by step: Replace each simple series or parallel group with its equivalent capacitor. Redraw the circuit after each step.
Repeat until you have one capacitor.

Note

This is exactly like simplifying resistor networks — but with the reciprocal formula for series. If you can do resistor networks, you can do capacitor networks. Just flip the series formula.

A Worked Example

Suppose you have three capacitors: $C_1 = 2\ \mu\text{F}$ , $C_2 = 3\ \mu\text{F}$ , $C_3 = 6\ \mu\text{F}$ . $C_2$ and $C_3$ are in parallel, and that combination is in series with $C_1$ . …

Start your 14-day free trial to unlock the full solution →

Because series-connected capacitors all carry the same charge, their individual voltage drops add up, giving a reciprocal-sum formula for the equivalent capacitance.

Working

Consider three capacitors $C_1$ , $C_2$ , $C_3$ connected in series between points A and B, with a battery maintaining a potential difference $V$ across the whole combination.

In a series connection, each capacitor carries the exact same charge $Q$ (charge induced by electrostatic induction is identical on each capacitor in the chain).

The voltage across each capacitor:

$V_1=\dfrac{Q}{C_1},\qquad V_2=\dfrac{Q}{C_2},\qquad V_3=\dfrac{Q}{C_3}$

The total voltage across the series combination is the sum of the individual voltage drops:

$V=V_1+V_2+V_3=Q\left(\dfrac1{C_1}+\dfrac1{C_2}+\dfrac1{C_3}\right)$

If $C_{eq}$ is the equivalent capacitance carrying the same charge $Q$ at the same total voltage $V$ : $V=Q/C_{eq}$ . Comparing: …

Start your 14-day free trial to unlock the full solution →

←Previous questionQ28 — What is corona discharge ?→Next questionQ30 — (a) Derive an expression for electrostatic potential due to an electri…

Q.Derive the expression for resultant capacitance, when capacitors are connected in series.

🎓Unlock everything free for 14 days

Unlock everything free for 14 days