Skip to content
Miscellaneous Exercise · Q3

Q.The cable of a uniformly loaded suspension bridge hangs in the form of a parabola. The roadway which is horizontal and 100100 m long is supported by vertical wires attached to the cable, the longest wire being 3030 m and the shortest being 66 m. Find the length of a supporting wire attached to the roadway 1818 m from the middle.

Punjab PsebTextbookSubjective· 3mImportance★★★★★est
57% · 84/148 Questions
✓ Free question

The cable forms a parabola symmetric about the midpoint. Using the vertex at the lowest point (shortest wire = 6 m) and the endpoint (longest wire = 30 m, half-span = 50 m), we find the parabola’s equation. Substituting x=18x = 18 m gives the wire length as 9.119.11 m.

The problem describes a suspension bridge where the cable hangs in a parabola. The roadway is horizontal, 100 m long, and vertical wires connect the cable to the roadway. The longest wire (at the ends) is 30 m, the shortest (at the middle) is 6 m. We need the length of the wire 18 m from the middle.

The key insight: the parabola is symmetric about the midpoint. The shortest wire is at the vertex (lowest point of the cable), and the longest wires are at the ends. So we set up a coordinate system with the vertex at the origin, and the parabola opening upward.


1. Set up the coordinate system

Place the vertex of the parabola at (0,0)(0, 0). Since the shortest wire is 6 m, the vertex is 6 m above the roadway. But careful: the wire length is the vertical distance from the roadway to the cable. If the roadway is horizontal, we can think of the cable’s height above the roadway. Let the roadway be the x-axis, and the cable’s height above it be yy. Then at the vertex, y=6y = 6 (shortest wire). But if we set the vertex at (0,0)(0,0), then the roadway is 6 m below it. That’s fine — we just need consistent coordinates.

Better: Let the roadway be the line y=0y = 0. The cable is above it. The shortest wire (at the middle) is 6 m, so the vertex of the parabola is at (0,6)(0, 6). The longest wire (at the ends) is 30 m, so at x=±50x = \pm 50 (half of 100 m), the cable height is 30.

So the parabola has vertex at (0,6)(0, 6) and opens upward. Its equation in standard form is:

(x−h)2=4a(y−k)(x - h)^2 = 4a(y - k)

Here h=0h = 0, k=6k = 6, so:

x2=4a(y−6)x^2 = 4a(y - 6)


2. Find the value of aa using the endpoint condition

At x=50x = 50, y=30y = 30. Substitute:

502=4a(30−6)50^2 = 4a(30 - 6)

2500=4a×242500 = 4a \times 24

2500=96a2500 = 96a

a=250096=62524a = \frac{2500}{96} = \frac{625}{24}

So the parabola equation is:

x2=4⋅62524(y−6)=6256(y−6)x^2 = 4 \cdot \frac{625}{24} (y - 6) = \frac{625}{6} (y - 6)


3. Find the wire length 18 m from the middle

We need yy when x=18x = 18:

182=6256(y−6)18^2 = \frac{625}{6} (y - 6)

324=6256(y−6)324 = \frac{625}{6} (y - 6)

Multiply both sides by 6:

1944=625(y−6)1944 = 625 (y - 6)

y−6=1944625y - 6 = \frac{1944}{625}

y=6+1944625y = 6 + \frac{1944}{625}


4. Simplify

1944625=3.1104\frac{1944}{625} = 3.1104

So y=9.1104y = 9.1104 m.

Thus the wire length is approximately 9.119.11 m.

Watch out

A common mistake is to set the vertex at (0,0)(0,0) and forget to shift for the 6 m shortest wire. Always check: the vertex corresponds to the minimum wire length, not zero.

Tip

You can also set the vertex at (0,0)(0,0) and let the roadway be y=−6y = -6, then the ends are at y=24y = 24 (since 30 - 6 = 24). The equation becomes x2=4ayx^2 = 4ay, and at x=50x=50, y=24y=24 gives a=2500/96a = 2500/96 same as before. Then at x=18x=18, y=324/(4a)=324×96/10000=3.1104y = 324/(4a) = 324 \times 96/10000 = 3.1104, and wire length = y+6=9.1104y + 6 = 9.1104. Both methods work — pick the one that feels more natural.

✓Final answer

The length of the supporting wire 18 m from the middle is 9.11\boxed{9.11} m.

Unlock everything free for 14 days

  • Full step-by-step solutions
  • Concept-first explanations
  • Methods, shortcuts & mistakes
  • PYQ mapping + timed mock tests

Full access for 14 days. No credit card required.