Q.A ball of mass 2 kg moving at 3 m/s collides elastically, head-on, with a stationary ball of mass 1 kg. Find the velocity of each ball after the collision, and verify that both momentum and kinetic energy are conserved.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Elastic Collision
Elastic Collision – From Intuition to Precision
Imagine two billiard balls on a table. They smash into each other, bounce apart, and keep moving. Now imagine two lumps of clay that collide and stick together — they stop moving as separate objects. The first case feels like nothing is lost; the second clearly loses motion. That feeling is the seed of the idea.
An elastic collision is the idealised version of that first case: a collision where no kinetic energy is turned into heat, sound, or permanent deformation. All the motion-energy that went in comes out again as motion-energy of the same total amount. The objects bounce perfectly.
The precise statement
For any collision between two bodies (call them A and B), two things are always true if no external force acts:
- Total linear momentum is conserved — this is a law of physics, always.
- Total kinetic energy may or may not be conserved — that depends on the nature of the collision.
An elastic collision is defined by the second condition: both total momentum and total kinetic energy are conserved.
Let the masses be m1, m2 and the velocities before collision be u1, u2; after collision, v1, v2. Then:
m1u1+m2u2=m1v1+m2v2
21m1u12+21m2u22=21m1v12+21m2v22
These two equations together define an elastic collision.
What this means physically
In an elastic collision, the objects do not get dented, heated, or stuck. They exchange energy and momentum purely through reversible deformation — like two perfect springs that compress and then fully recover. Real collisions are never perfectly elastic (some energy always leaks into sound or heat), but many are close enough: billiard balls, steel ball bearings, gas molecules.
A common mistake is to think "elastic" means the objects themselves are elastic (like a rubber band). That's not the point. The collision is elastic — the total kinetic energy is the same before and after. A rubber ball hitting a wall can be nearly elastic; a lump of clay hitting a wall is not.
A useful derived result
From the two conservation equations, you can derive a neat relation for one-dimensional collisions:
u1−u2=−(v1−v2)
That is, the relative speed of approach equals the relative speed of separation. This is often easier to use than the full energy equation in problems. …
Use the standard elastic-collision formulas for v1′ and v2′, then check momentum and KE are both conserved. …
Given: m1=2 kg, u1=3 m/s; m2=1 kg, u2=0 (elastic, head-on).
Using the standard elastic-collision formulas: v1′=m1+m2(m1−m2)u1+2m2u2=2+1(2−1)(3)+0=33=1 m/s v2′=m1+m2(m2−m1)u2+2m1u1=30+2(2)(3)=312=4 m/s
Checking momentum conservation: before, pi=m1u1=2×3=6 kgm/s; after, pf=m1v1′+m2v2′=2(1)+1(4)=2+4=6 kgm/s. Equal, as required. …
Substitute directly into the standard elastic-collision formulas for v1′ and v2′ with u2=0, then independently v …
- Swapping which mass is m1 and which is m2 in the formulas, which flips the results. …
- CBSE 2026Set ANNUAL1 markMCQQ.A ball of mass 2 kg moving with a speed of 10 m/s collides elastically with another ball of mass 3 kg at rest. What will be the speed of the 3 kg ball after collision ?(a) 0 m/s(b) 2 m/s(c) − 2 m/s(d) 8 m/s
›Reveal solutionSolution
Elastic collision: v2 = 2 m1 u/(m1 + m2) = 8 m/s. Answer (D).
For a one-dimensional elastic collision where mass m2 is initially at rest, the velocity of the struck body is:
v2 = 2 m1 u /(m1 + m2).
…
- CBSE 2025Set ANNUAL1 markMCQQ.For perfect elastic collision (A) e = 1 (B) e > 1 (C) e < 1 (D) e = 0
›Reveal solutionSolution
A perfectly elastic collision has coefficient of restitution e = 1.
The coefficient of restitution is defined as:
e=relative velocity of approachrelative velocity of separation
For a perfectly elastic collision, both momentum and kinetic energy are conserved, which mathematically requires the relative speed of separation to exactly equal the relative speed of approach, giving e=1. For an inelastic collision …
- CBSE 2020Set ANNUAL1 markQ.Two identical solid balls, one of ivory and the other of wet-clay, are dropped from the same height on the floor. Which one will rise to a greater height after striking the floor and why?
›Reveal solutionSolution
Ivory is a hard, elastic material, so its collision with the floor is close to perfectly elastic and it rebounds to nearly the same height it was dropped from; wet clay is soft and deforms permanently on impact (a highly inelastic collision), losing almost all of its kinetic energy, so it barely rises after striking the floor.
When a ball is dropped and strikes the floor, the height h' to which it rebounds depends on how much of its kinetic energy just before impact is retained just after impact (rather than being lost to permanent deformation, heat, and sound during the collision) — this is measured by the coefficient of restitution, e, of the collision (e close to 1 = nearly elastic, e close to 0 = highly inelastic).
Ivory is a hard, relatively rigid and elastic material. When an ivory ball strikes the floor, it undergoes very little permanent deformation — it compresses briefly on impact and then springs back to its original shape, converting most of the kinetic energy back into the ball's motion. So the collision is close to perfectly elastic (e close to 1), and the ball rebounds to nearly the height it was dropped from.
…
- CBSE 2019Set ANNUAL1 markQ.The bob A of a pendulum released from 30° to the vertical hits another bob B of the same mass at rest on a table as shown in Fig. How high does the bob A rise after the collision? Neglect the size of the bobs and assume the collision to be elastic.
›Reveal solutionSolution
Elastic collision + equal masses + target initially at rest ⇒ velocities are exchanged, so the striking bob (A) stops completely and rises to zero height.
For a head-on elastic collision between two bodies of equal mass m, where the second body (B) is initially at rest, momentum and kinetic-energy conservation together give the standard result that the velocities are exchanged: body A (the one that was moving) ends up at rest, and body B moves off with A's original velocity.
Let A be released from 30° to the vertical. By energy conservation on the way down (before the collision), A arrives at the bottom (table level) with some speed v, having converted its initial gravitational PE fully into KE.
At the collision: since mA=mB=m and it is elastic, the exchange-of-velocity result gives:
- A's velocity after collision =0
- B's velocity after collision =v (A's velocity just before collision) …
- CBSE 2018Set ANNUAL1 markMCQQ.In Elastic Collision:(a) Both momentum and K.E are conserved(b) Both momentum and K.E are not conserved(c) Momentum is conserved and K.E is not conserved(d) Momentum is not conserved and K.E is conserved
›Reveal solutionSolution
Elastic collision = momentum conserved AND kinetic energy conserved; this is what distinguishes it from an inelastic collision.
In any collision (elastic or inelastic), as long as no external force acts on the system, linear momentum is always conserved — this follows directly from Newton's third law (the colliding bodies exert equal and opposite forces on each other for equal times, so their net impulse on the system is zero).
…
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.