A $1000\ \text{W}$ electric immersion heater is used to heat $2\ \text{kg}$ of water from $20\,^\circ\text{C}$ to $80\,^\circ\text{C}$. Assuming all the electrical energy supplied is converted into heat with no losses to the surroundings, and taking the specific heat capacity of water as $4200\ \text{J kg}^{-1}\text{K}^{-1}$, find the time taken.

A 1000W electric immersion heater is used to heat 2kg of water from 20circC to 80circC. Assuming all the elect

Numerical · Q22

1000\ \text{W}

West Bengal WbchseTextbookSubjectiveImportance★★★★★

96% · 22/23 Questions

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Concept understanding — Specific Heat Capacity

What is Specific Heat Capacity?

Imagine you have two identical stoves, two identical pots, and you put 1 kg of water in one pot and 1 kg of iron in the other. You turn both stoves to the same flame. After 2 minutes, the iron is scorching hot — you can't touch it. The water is still lukewarm.

Why? Because different substances need different amounts of heat to raise their temperature by the same amount. That's the core idea behind specific heat capacity.

The Intuition

Think of heat as "energy currency" and temperature rise as "buying a degree." Some materials are "cheap" — a little heat buys a big temperature rise. Others are "expensive" — you need to spend a lot of heat to get even a small rise.

Iron is cheap: a small heat input → large temperature jump.
Water is expensive: a large heat input → small temperature jump.

This "expensiveness" is what we call specific heat capacity. It tells you how much heat energy is needed to raise the temperature of 1 kg of a substance by 1 °C (or 1 K).

The Precise Definition

c = \frac{Q}{m \Delta T}

Where:

$c$ = specific heat capacity (J/kg·°C or J/kg·K)
$Q$ = heat energy supplied (J)
$m$ = mass of the substance (kg)
$\Delta T$ = change in temperature (°C or K)

In words: Specific heat capacity is the amount of heat required to raise the temperature of one kilogram of a substance by one degree Celsius (or one Kelvin).

Key Points to Remember

It's a property of the material, not the object. A small iron nail and a giant iron beam have the same $c$ value — but the beam needs more total heat because it has more mass.
Units matter. Common values:
- Water: $c = 4186 \text{ J/kg·°C}$ (or ≈ 4200 J/kg·°C in many problems)
- Iron: $c \approx 450 \text{ J/kg·°C}$
- Copper: $c \approx 390 \text{ J/kg·°C}$
Notice water's value is about 10 times that of iron — that's why water heats up so slowly compared to metals.
The formula works both ways. If a substance cools down, it releases the same amount of heat it would absorb to warm up by the same $\Delta T$ .

A Common Mistake to Avoid

Watch out

Don't confuse specific heat capacity ( $c$ ) with heat capacity ( $C$ ). Heat capacity is for an entire object: $C = mc$ . A large iron block can have a higher heat capacity than a small cup of water, even though iron's $c$ is much smaller. Always check: are we talking about per kg or for the whole thing?

Worked Example (Exam-Style)

Problem: How much heat is needed to raise the temperature of 2 kg of water from 20 °C to 50 °C? (Take $c_{\text{water}} = 4200 \text{ J/kg·°C}$ )

Solution:

$m = 2 \text{ kg}$
$\Delta T = 50 - 20 = 30 \text{ °C}$
$c = 4200 \text{ J/kg·°C}$

Q = mc\Delta T = 2 \times 4200 \times 30 = 252\,000 \text{ J} = 252 \text{ kJ}

Answer: 252 kJ of heat is required.

Why This Matters …

Start your 14-day free trial to unlock the full solution →

Given: $m = 2\ \text{kg}$ , $c = 4200\ \text{J kg}^{-1}\text{K}^{-1}$ , $\Delta T = 80-20 = 60\,^\circ\text{C}$ , heater power $P = 1000\ \text{W}$ .

Heat required:

Q = mc\,\Delta T = 2 \times 4200 \times 60 = 504{,}000\ \text{J}

Time taken, since power is energy delivered per second, $P = Q/t$ :

$t = \frac{Q}{P} = \frac{504{,}000}{1000} = 504\ \text{s}$ …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

Showing the 12 most recent of 13 on this concept.

CBSE 2026Set ANNUAL1 markMCQ
$Q. What is the S.I. unit of specific heat capacity?$
(a) J kg^-2 K^-1
(b) J kg^-1 K^-1
(c) J^-1 kg^-1 K^-1
(d) J kg^-1 K^-2
›Reveal solutionSolution

The SI unit of specific heat capacity is J kg⁻¹ K⁻¹.

Specific heat capacity is defined as the heat required to raise the temperature of unit mass of a substance by one unit (kelvin/°C): s = Q/(mΔT). Since Q is measured in joules (J), m in kilograms (kg), and ΔT …

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 mark
$Q. Write the definition of Specific Heat.$
›Reveal solutionSolution

Specific heat s = Q/(mΔT) — the heat needed per unit mass per unit rise in temperature.

When an amount of heat Q is supplied to a body of mass m, its temperature rises by some amount ΔT (as long as no phase change occurs). The specific heat (or specific heat capacity) of the substance is defined as the heat required to raise the temperature of a unit mass of that substance by one unit (one kelvin or one degree Celsius): s = Q/(mΔT), with SI unit J kg⁻¹ K⁻¹. It is an intrinsic property of the material — e.g. water ha …

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 markMCQ
$Q. SI unit of specific heat capacity is$
(a) J kg K^-1
(b) J kg^-1 K^-1
(c) J kg^-1 K^-2
(d) J mol^-1 K^-1
›Reveal solutionSolution

SI unit of specific heat capacity is J kg^-1 K^-1. Answer (B).

Specific heat capacity c is defined by Q = m c dT, so c = Q/(m dT).

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. The heat capacity of a vessel is 520 cal gm^-1. Its water equivalent will be (A) 520 cal (B) 520 gm (C) 52 gm (D) none of these$
›Reveal solutionSolution

A vessel with heat capacity 520 cal/°C has a water equivalent of 520 g.

Heat capacity (thermal capacity) of a body is the amount of heat required to raise its temperature by 1°C: $S = mc$ (units cal/°C).

Water equivalent $W$ is defined as the mass of water that would absorb (or need) the same amount of heat as the given body for the same temperature change:

$W \times c_{water} = S \Rightarrow W = \dfrac{S}{c_{water}}$

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. On which law is the principle of calorimetry based? (A) The law of energy conservation (B) The law of momentum conservation (C) The law of angular momentum conservation (D) None of these$
›Reveal solutionSolution

The principle of calorimetry (heat lost = heat gained) is a direct application of the law of conservation of energy.

When a hot and a cold substance are mixed in an isolated system (no heat exchange with surroundings), the principle of calorimetry states:

$\text{Heat lost by hot body} = \text{Heat gained by cold body}$

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 markMCQ
$Q. If Cp and Cv are the specific heat capacity at constant pressure and specific heat capacity at constant volume, then which option is correct?$
(a) Cp < Cv
(b) Cp > Cv
(c) Cp = Cv
(d) Cp ~ Cv
›Reveal solutionSolution

Cp (specific heat at constant pressure) is always greater than Cv (specific heat at constant volume) because at constant pressure some of the supplied heat goes into doing expansion work, not just raising temperature.

At constant volume, all the heat supplied to a gas goes entirely into increasing its internal energy (raising temperature), since the gas cannot expand and do work.

…

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANNUAL1 mark
$Q. Answer in one word or one sentence: Write the value of specific heat of water in SI unit.$
›Reveal solutionSolution

Water's specific heat capacity is about 4186 J kg^-1 K^-1 in SI units.

Specific heat capacity (c) is the amount of heat required to raise the temperature of a unit mass of a substance by one degree (kelvin or Celsius). For water, this value is unusually high compared to most substances, which is why water is an effective coolant and moderates climate near large water bodies. In SI units, c(water) is approximately 4186 J kg …

Start your 14-day free trial to see the full solution →
CBSE 2025Set ANN1 mark
$Q. Name the substance which has the highest specific heat capacity.$
›Reveal solutionSolution

Water has the highest specific heat capacity among common substances, about 4186 J per kg per kelvin.

Specific heat capacity c is the amount of heat required to raise the temperature of 1 kg of a substance by 1 K (or 1 degree C): Q = m c (delta T).

…

Start your 14-day free trial to see the full solution →
CBSE 2024Set ANNUAL1 markMCQ
$Q. Which of the following materials has the highest specific heat capacity?$
(a) Ice
(b) Glass
(c) Iron
(d) Water
›Reveal solutionSolution

Water's specific heat capacity (~4186 J/kg·K, i.e. 1 cal/g·°C) is exceptionally high compared to other common substances — much higher than ice, glass, or iron.

Approximate specific heat capacities: Water ≈ 4186 J/(kg·K); Ice ≈ 2100 J/(kg·K); Glass ≈ 840 J/(kg·K); Iron ≈ 450 J/(kg·K).

…

Start your 14-day free trial to see the full solution →
CBSE 2024Set SET-AP55001 mark
$Q. What is specific heat capacity?$
›Reveal solutionSolution

Specific heat capacity (c) is the heat required to raise the temperature of 1 kg (unit mass) of a substance by 1°C (or 1 K).

When an amount of heat Q is supplied to a body of mass m and its temperature rises by ΔT, the heat capacity of the whole body is Q/ΔT (heat needed per degree). Dividing further by the mass gives a property that depends only on the MATERIAL, not on how much of it there is:

c = Q / (m ΔT)

…

Start your 14-day free trial to see the full solution →
CBSE 2024Set ANNUAL1 markMCQ
$Q. The SI unit for specific heat capacity is:$
(a) J kg^-1 K^-1
(b) J kg^-1
(c) K kg^-1 J^-1
(d) J kg K^-1
›Reveal solutionSolution

Specific heat capacity s is defined by Q = m s ΔT, so s = Q/(m ΔT), giving SI unit J kg^-1 K^-1.

Specific heat capacity is defined as the amount of heat required to raise the temperature of a unit mass of a substance by one unit (one kelvin).

From Q = m s ΔT, we get s = Q / (m ΔT).

…

Start your 14-day free trial to see the full solution →
CBSE 2023Set ANNUAL1 markMCQ
$Q. SI unit of specific heat capacity is:$
(a) cal/g/k
(b) kcal/g
(c) J/kg/k
(d) J/kg
›Reveal solutionSolution

SI unit of specific heat capacity = J kg^-1 K^-1 (J/kg/K).

Specific heat capacity c is defined by Q = mcΔT, so c = Q/(mΔT).

…

Start your 14-day free trial to see the full solution →

←Previous questionQ21 — Treating the Sun as a black-body sphere of radius R = 6.96×10⁸m with a…→Next chapterCh 11Thermodynamics

🎓Unlock everything free for 14 days

Unlock everything free for 14 days