Q.Prove that the function f defined by f(x)=⎩⎨⎧∣x∣+2x2x,k,x=0x=0 remains discontinuous at x=0, regardless the choice of k.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity at a point — if the one-sided limits differ, no value of k can restore continuity.
Left of 0 (x<0, so ∣x∣=−x):
f(x)=−x+2x2x=x(−1+2x)x=−1+2x1x→0−−11=−1.
Right of 0 (x>0, so ∣x∣=x):
f(x)=x+2x2x=x(1+2x)x=1+2x1x→0+1. …
Splitting on the sign of x gives a right-hand limit of 1 and a left-hand limit of −1 — a finite jump — so limx→0f(x) does not exist and no choice of k makes f continuous at x=0.
Why the choice of k can't help
k only sets the single value f(0). Continuity needs the limit to exist and equal that value. If the left and right limits disagree, the limit itself fails to exist, and then there is nothing f(0) can match — k is powerless.
The absolute value ∣x∣ makes f behave differently on the two sides of 0, so we examine each side.
Step-by-step
1. Right side (x>0). Here ∣x∣=x, so
f(x)=x+2x2x=x(1+2x)x=1+2x1.
Cancelling x is legal because x=0. As x→0+, 1+2x→1, so
limx→0+f(x)=1.
2. Left side (x<0). Here ∣x∣=−x, so
f(x)=−x+2x2x=x(−1+2x)x=−1+2x1.
As x→0−, −1+2x→−1, so
limx→0−f(x)=−1. …
Method: Proving Discontinuity Is Unavoidable for Every Value of a Parameter
This method applies when a problem asks you to show that no choice of a constant k (used to define f(a)) can make a piecewise function continuous at a — the constant only controls the function's value at the point, not the limit approaching it.
Steps
Step 1: Recognise what the constant can and cannot fix
A constant like k defined as f(a)=k only sets the single value at the point. It cannot change what the function does on either side of a. So continuity is only possible if x→alimf(x) exists in the first place — if it doesn't, no k can rescue continuity.
Step 2: Split the expression by sign and simplify each branch …
Common Mistakes
Mistake 1: Sign error when replacing ∣x∣ on the two sides of the point
Why it's wrong: students often use ∣x∣=x on both sides, or forget that ∣x∣=−x for x<0 — this silently changes the algebra and can make a genuine jump discontinuity look removable. Correct approach: explicitly write ∣x∣=−x for x<0 and ∣x∣=x for x>0 before simplifying, treating the two cases completely separately.
Mistake 2: Believing the constant k could still "fix" a jump discontinuity …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2024Set eng-2024-05-23-FN1 markMCQQ.If f(x)=⎩⎨⎧a+x−a−xa2−ax+x2−x2+ax+a2,K,x=0x=0 is continuous at x=0, then K= (A) −a (B) a (C) −1 (D) a+a
›Reveal solutionSolution
This is a 0/0 form at x=0; rationalizing both the numerator and denominator turns it into a clean limit that evaluates to −a.
Concept and Intuition
Whenever both numerator and denominator vanish at the point of interest, multiplying each by its conjugate surd converts the difference-of-square-roots into a simple polynomial difference, which then cancels the common factor causing the indeterminacy.
Step-by-Step Solution
- Let N(x)=a2−ax+x2−a2+ax+x2. Multiply and divide by the conjugate:
N(x)=a2−ax+x2+a2+ax+x2(a2−ax+x2)−(a2+ax+x2)=a2−ax+x2+a2+ax+x2−2ax
- Let D(x)=a+x−a−x. Similarly,
D(x)=a+x+a−x(a+x)−(a−x)=a+x+a−x2x
- So f(x)=D(x)N(x)=a2−ax+x2+a2+ax+x2−2ax×2xa+x+a−x. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2021Set eng-2021-08-23-AN1 markMCQQ.If the function f(x), defined below, is continuous everywhere, then 'k' equals ______ f(x)=⎩⎨⎧1+x−12x−1,k,−1≤x<∞,x=0x=0 (A) 21loge2 (B) loge4 (C) loge8 (D) loge2
›Reveal solutionSolution
Continuity at x=0 requires k to equal the limit of f(x) as x→0, which works out to ln4 using standard small-x approximations.
Concept and Intuition
For f to be continuous at x=0, we need x→0limf(x)=f(0)=k. Both numerator and denominator vanish as x→0 (this is a 0/0 form), so we use the standard first-order approximations 2x−1≈xln2 and 1+x−1≈x/2 near x=0.
Step-by-Step Solution
- Numerator: 2x−1=exln2−1≈xln2 for small x.
- Denominator: 1+x−1=(1+x)1/2−1≈2x for small x (binomial expansion).
- So x→0lim1+x−12x−1=x→0limx/2xln2=2ln2. …
- AP EAPCET 2021Set eng-2021-08-19-FN1 markMCQQ.f(x)=⎩⎨⎧2−1+cosx72x−9x−8x+1,klog2log3,x=0x=0 Find the value of 'k' for which the function f is continuous. (A) 2 (B) 24 (C) 183 (D) 242
›Reveal solutionSolution
Factoring the numerator as (9x−1)(8x−1) and expanding the denominator via 1+cosx=2cos2(x/2) gives the limit 242ln2ln3, so k=242.
Concept and Intuition
Both numerator and denominator vanish as x→0 — a 0/0 form best handled by recognizing the standard small-x approximations ax−1≈xloga and 1−cosθ≈θ2/2, rather than repeated L'Hôpital. Spotting that 72=9×8 lets the numerator factor neatly, turning a messy expression into a clean product of two standard limits.
Step-by-Step Solution
- Since 72=9×8: 72x−9x−8x+1=9x8x−9x−8x+1=(9x−1)(8x−1).
- As x→0: 9x−1∼xln9, 8x−1∼xln8, so numerator ∼x2ln9ln8.
- 1+cosx=2cos2(x/2), so 1+cosx=2cos(x/2) (for small x).
- Denominator =2−2cos(x/2)=2(1−cos2x)∼2⋅2(x/2)2=82x2.
- Limit =2x2/8x2ln9ln8=28ln9ln8. …
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.Which one of the following function is discontinuous at x=1? (A) f(x)=sin2x+tan2x+cos2x−sec2x (B) f(x)=1+2sinx1 (C) f(x)=⎩⎨⎧∣x−1∣+2(x−1)2x−1,1,x=1x=1 (D) f(x)=ex+5
›Reveal solutionSolution
Options (A), (B), (D) simplify to functions that are continuous everywhere; option (C)'s one-sided limits at x=1 disagree (+1 from the right, −1 from the left), so it alone is discontinuous at x=1.
Concept and Intuition
For piecewise/rational-looking expressions, check whether the identity sin2x+cos2x=1 and sec2x−tan2x=1 collapse them to constants (continuous), whether a denominator can vanish, and — for absolute-value expressions — whether the left and right limits genuinely agree.
Step-by-Step Solution
- (A) f(x)=sin2x+tan2x+cos2x−sec2x=(sin2x+cos2x)−(sec2x−tan2x)=1−1=0 for all x where tan,sec are defined; at x=1 (radian) cos1=0, so it's fine and continuous (≡0 near x=1).
- (B) f(x)=1+2sinx1: since 2sinx>0 always, the denominator never vanishes (≥1+2−1=1.5); continuous everywhere, including x=1.
- (C) For x=1, let t=x−1: f=∣t∣+2t2t.
- As t→0+ (x→1+): ∣t∣=t, so f=t+2t2t=1+2t1→1.
- As t→0− (x→1−): ∣t∣=−t, so f=−t+2t2t=−1+2t1→−1. …
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
- AP EAPCET 2026Set eng-2026-05-14-FN1 markMCQQ.If f(x)=⎩⎨⎧(π−x)22+cosx−1,k,x=πx=π is continuous at x=π, then k= (A) 1 (B) 21 (C) 2 (D) 41
›Reveal solutionSolution
Continuity at x=π requires k to equal the limit of the given expression as x→π; using a small-angle substitution, that limit is 41.
Concept and Intuition
For f to be continuous at x=π, we need k=x→πlim(π−x)22+cosx−1. Substituting x=π−h (so h→0 as x→π) converts the trig limit into a small-h approximation problem, where standard expansions (cosh≈1−h2/2, 1+t≈1+t/2) make the limit easy to evaluate.
Step-by-Step Solution
- Let x=π−h, so as x→π, h→0, and π−x=h.
- cosx=cos(π−h)=−cosh.
- So 2+cosx=2−cosh. Using cosh≈1−2h2 for small h: 2−cosh≈2−1+2h2=1+2h2.
- 2+cosx≈1+2h2≈1+4h2 (using 1+t≈1+t/2 with t=h2/2).
- So 2+cosx−1≈4h2.
- The denominator is (π−x)2=h2. …
- AP EAPCET 2026Set eng-2026-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧(2+5x22+3x2)x28+3,k,for x=0for x=0 is a continuous function at x=0, then k= (A) e−2 (B) e−4 (C) e−8 (D) e−16
›Reveal solutionSolution
This tests the standard 1∞ exponential limit technique. Taking logs and expanding to first order in x2 gives k=e−8.
Concept and Intuition
Expressions of the form (base →1)power→∞ are evaluated by writing L=elim(power)⋅log(base) and expanding log(1+u)≈u for the small quantity u= base−1. The constant added to the exponent (here +3) never survives, since it multiplies a term that itself →0.
Step-by-Step Solution
- For continuity at x=0: k=limx→0(2+5x22+3x2)8/x2+3.
- Let L denote this limit. Then logL=limx→0(x28+3)log(2+5x22+3x2).
- Write the base as 1+u where u=2+5x22+3x2−1=2+5x2−2x2≈−x2 for small x (to leading order).
- log(1+u)≈u≈−x2 for small x. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.f(x)=⎩⎨⎧x+1(2x2−ax+1)−(ax2+3bx+2),k,if x=−1if x=−1 is a real valued function. If a,b,k∈R and f is continuous on R then k= (A) −31 (B) 6 (C) a−2 (D) a−3
›Reveal solutionSolution
Continuity at the removable-type point requires the numerator to vanish there (fixing b) and then simplifying the quotient to evaluate k as a limit. The answer is k=a−3.
Concept and Intuition
A rational expression x+1N(x) can only have a finite limit as x→−1 if N(−1)=0 (otherwise the limit is ±∞ and no choice of k can make f continuous there). So the first job is to use that vanishing condition to pin down any free constant, then simplify by cancelling the common factor.
Step-by-Step Solution
- Numerator: (2x2−ax+1)−(ax2+3bx+2)=(2−a)x2−(a+3b)x−1.
- At x=−1: (2−a)(1)+(a+3b)−1=1+3b. For the limit (hence continuity) to exist finitely, this must be 0: b=−31.
- With b=−1/3, numerator becomes (2−a)x2−(a−1)x−1.
- Factor out (x+1): writing (2−a)x2−(a−1)x−1=(x+1)[(2−a)x−1] (verified by expansion, matching all coefficients). …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If f:R→R defined by f(x)=⎩⎨⎧xsinx−sin2x,x3/2x2+x−x,x<0x>0 is continuous on R, then f(0)= (A) 1/2 (B) 3/2 (C) 1 (D) −1
›Reveal solutionSolution
This tests continuity of a piecewise function at the junction point using standard small-x approximations; both one-sided limits equal 1/2.
Concept and Intuition
A piecewise function is continuous at a boundary point only if the left-hand limit, right-hand limit, and the defined value at that point all agree. Here f(0) isn't given directly by either branch (both blow up as 0/0), so we must compute the limits from each side and set f(0) equal to their common value.
Step-by-Step Solution
- Left-hand limit (x→0−):
limx→0−xsinx−sin(x/2)
Use the small-angle expansion sint=t−6t3+⋯:
sinx−sin2x=(x−6x3)−(2x−48x3)+⋯=2x+O(x3)
Dividing by x: the limit is 21.
- Right-hand limit (x→0+):
limx→0+x3/2x2+x−x=limx→0+x3/2x(x+1−1)=limx→0+xx+1−1
Using 1+x≈1+2x−8x2+⋯:
xx+1−1≈xx/2=21 …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=⎩⎨⎧2−xx2−4,a,log(x−2),for x<2for x=2for x>2 is a real valued function and 'a' is a finite real number, then (A) f is continuous at x = 2 when a = 0 (B) f is left continuous at x = 2 when a = 0 (C) f is right continuous at x = 2 when a = log 2 (D) f is not continuous at x = 1
›Reveal solutionSolution
This tests one-sided limits at a piecewise junction; the left-hand limit at x=2 is 0 while the right-hand limit diverges to −∞, so option (B) is the only correct statement.
Concept and Intuition
For left continuity at x=2 we only need limx→2−f(x)=f(2); the behaviour on the other side is irrelevant. Since log(x−2)→−∞ as x→2+, no finite value of a can make f right-continuous or fully continuous at x=2 — so those statements must be false.
Step-by-Step Solution
- Left-hand limit: let x=2−h, h→0+. Then x2−4=(2−h)2−4=h2−4h=h(h−4) and 2−x=h.
- So 2−xx2−4=hh(h−4)=h(h−4)→0⋅(−4)=0.
- Left continuity at x=2 requires f(2)=a to equal this limit, i.e. a=0. So (B) is true.
- Right-hand limit: as x→2+, x−2→0+, so log(x−2)→−∞ — unbounded, so no finite a (in particular a=log2) can match it. So (C) is false, and (A) (needing both sides equal) is also false. …
- AP EAPCET 2022Set eng-2022-07-04-AN1 markMCQQ.Let f(x)=⎩⎨⎧∣x∣1,ax2+b,for ∣x∣>1for ∣x∣≤1. If x→1limf(x) and x→−1limf(x) exist, then the possible values for a and b are (A) a=b=1 (B) a=−21,b=−23 (C) a=23,b=−21 (D) a=21,b=−23
›Reveal solutionSolution
Both one-sided limits at x=±1 force a+b=1; checking the options, only a=23,b=−21 satisfies this.
Concept and Intuition
The function is piecewise, switching definition exactly at ∣x∣=1. For the limit to exist at a switch-point, the two pieces must approach the same value from either side — this is the usual "match the boundary values" condition for piecewise functions.
Step-by-Step Solution
- Near x=1: for x slightly less than 1 we're in the ax2+b branch (∣x∣≤1); for x slightly more than 1 we're in the 1/∣x∣ branch.
- Left limit: a(1)2+b=a+b.
- Right limit: ∣1∣1=1.
- Condition: a+b=1.
- Near x=−1: for x slightly less than −1 (i.e. ∣x∣>1), branch is 1/∣x∣; for x slightly more than −1 (i.e. ∣x∣<1), branch is ax2+b.
- Left limit: 1/∣−1∣=1.
- Right limit: a(−1)2+b=a+b.
- Condition: a+b=1 (same equation again). …
- Near x=1: for x slightly less than 1 we're in the ax2+b branch (∣x∣≤1); for x slightly more than 1 we're in the 1/∣x∣ branch.
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.