Q.Find whether the function is continuous or discontinuous at the indicated point: f(x)=⎩⎨⎧1+e1/xe1/x,0,x=0x=0 at x=0.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity At A Point — A function is continuous at x=a if limx→af(x)=f(a). For piecewise functions, check the left-hand limit, right-hand limit, and the function value.
Step 1: Evaluate f(0)
Given directly: f(0)=0.
Step 2: Compute limx→0+f(x)
As x→0+, x1→+∞, so e1/x→∞.
Then f(x)=1+e1/xe1/x→∞∞→1 (divide numerator and denominator by e1/x: e−1/x+11→1).
Thus limx→0+f(x)=1.
Step 3: Compute limx→0−f(x)
As x→0−, x1→−∞, so e1/x→0. …
The function is discontinuous at x=0 because the left-hand limit (0) and the right-hand limit (1) are different, so the limit does not exist.
The Core Idea: Continuity at a Point
A function is continuous at a point x=a if three things hold:
- f(a) is defined.
- limx→af(x) exists.
- limx→af(x)=f(a).
Here, f(0)=0 is given, so condition 1 is satisfied. The real question is whether the limit exists. The function involves e1/x, which behaves very differently depending on whether x approaches 0 from the left (x→0−) or from the right (x→0+). This is because 1/x shoots to −∞ on the left and +∞ on the right. So we must check the one-sided limits separately.
Step-by-Step Solution
1. Understand the behaviour of e1/x near x=0.
When x is a small positive number (say x=0.001), 1/x is a large positive number, so e1/x becomes enormous. As x→0+, 1/x→+∞, hence e1/x→+∞.
When x is a small negative number (say x=−0.001), 1/x is a large negative number, so e1/x becomes very close to 0. As x→0−, 1/x→−∞, hence e1/x→0.
This difference is the key to the entire problem.
2. Compute the right-hand limit (x→0+).
We need x→0+lim1+e1/xe1/x.
Since e1/x→∞, both numerator and denominator blow up. A standard trick is to divide the numerator and denominator by e1/x:
1+e1/xe1/x=e−1/x+11
Now as x→0+, e−1/x→e−∞=0. So the expression approaches 0+11=1.
Thus, x→0+limf(x)=1.
3. Compute the left-hand limit (x→0−).
We need x→0−lim1+e1/xe1/x.
Here, e1/x→0. So the numerator tends to 0 and the denominator tends to 1+0=1. Therefore, the whole fraction tends to 0/1=0.
Thus, x→0−limf(x)=0. …
Method: Testing Continuity via One-Sided Limits of an Exponential Expression
This method applies whenever a function involves e1/x (or any eg(x) where g(x)→+∞ from one side and g(x)→−∞ from the other side of the point being tested) — the exponential's behaviour is fundamentally different on the two sides, so a single substitution is never valid here.
Steps
Step 1: Analyse how the inner expression behaves on each side of the point.
For x1 at x=0: as x→0+, x1→+∞; as x→0−, x1→−∞. This asymmetry is the whole reason one-sided limits are unavoidable.
Step 2: Translate that into exponential behaviour.
et→∞ as t→+∞,et→0 as t→−∞.
So e1/x→∞ as x→0+ and e1/x→0 as x→0−.
Step 3: Handle the ∞/∞ side by dividing numerator and denominator by the dominant exponential term. …
Common Mistakes
Mistake 1: Evaluating the limit as if e1/x behaves the same way from both sides of x=0.
Why it's wrong: x1→+∞ as x→0+ but x1→−∞ as x→0−, so e1/x blows up on one side and vanishes on the other — treating them identically (e.g. substituting a single limit value for e1/x everywhere) produces a wrong, and often self-contradictory, result. Correct approach: always split into the right-hand limit (x→0+) and left-hand limit (x→0−) and evaluate each with its own behaviour of e1/x.
Mistake 2: Leaving the ∞/∞ side unresolved instead of dividing through by the dominant exponential term. …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.Which one of the following function is discontinuous at x=1? (A) f(x)=sin2x+tan2x+cos2x−sec2x (B) f(x)=1+2sinx1 (C) f(x)=⎩⎨⎧∣x−1∣+2(x−1)2x−1,1,x=1x=1 (D) f(x)=ex+5
›Reveal solutionSolution
Options (A), (B), (D) simplify to functions that are continuous everywhere; option (C)'s one-sided limits at x=1 disagree (+1 from the right, −1 from the left), so it alone is discontinuous at x=1.
Concept and Intuition
For piecewise/rational-looking expressions, check whether the identity sin2x+cos2x=1 and sec2x−tan2x=1 collapse them to constants (continuous), whether a denominator can vanish, and — for absolute-value expressions — whether the left and right limits genuinely agree.
Step-by-Step Solution
- (A) f(x)=sin2x+tan2x+cos2x−sec2x=(sin2x+cos2x)−(sec2x−tan2x)=1−1=0 for all x where tan,sec are defined; at x=1 (radian) cos1=0, so it's fine and continuous (≡0 near x=1).
- (B) f(x)=1+2sinx1: since 2sinx>0 always, the denominator never vanishes (≥1+2−1=1.5); continuous everywhere, including x=1.
- (C) For x=1, let t=x−1: f=∣t∣+2t2t.
- As t→0+ (x→1+): ∣t∣=t, so f=t+2t2t=1+2t1→1.
- As t→0− (x→1−): ∣t∣=−t, so f=−t+2t2t=−1+2t1→−1. …
- AP EAPCET 2021Set eng-2021-08-20-AN1 markMCQQ.If f(x)=sinx3loge(1+x2(tanx)), x=0 is to be continuous at x=0, then f(0) must be equal to ______ (A) 1 (B) 0 (C) 21 (D) −1
›Reveal solutionSolution
Using the small-angle equivalences loge(1+u)∼u, tanx∼x, and sinx3∼x3 near x=0, the limit of f(x) works out to 1, so f(0)=1 is required for continuity.
Concept and Intuition
For a function to be continuous at a removable-looking point like x=0, its value there must be defined equal to the limit of the function as x→0. Standard small-x equivalences (loge(1+u)∼u for small u; tanx∼x; sinx∼x) let us evaluate the 00-type limit cleanly.
Step-by-Step Solution
- As x→0, let u=x2tanx. Since tanx∼x for small x, u∼x2⋅x=x3→0.
- Using loge(1+u)∼u for small u: loge(1+x2tanx)∼x2tanx∼x3.
- For the denominator, sin(x3)∼x3 as x→0 (since sinθ∼θ for small θ, here θ=x3→0).
- So f(x)=sin(x3)loge(1+x2tanx)→x3x3=1 as x→0. …
- AP EAPCET 2024Set eng-2024-05-21-AN1 markMCQQ.If the function f(x)=x1+x−1 is continuous at x=0 then f(0)= (A) −21 (B) 31 (C) 21 (D) −31
›Reveal solutionSolution
Rationalizing the numerator turns the 0/0 form into a simple limit, which must equal f(0) for continuity.
Concept and Intuition
For f to be continuous at x=0, we need f(0)=x→0limf(x). Since the given formula for f(x) is 0/0 at x=0, we must simplify it algebraically first.
Step-by-Step Solution
- x1+x−1=x(1+x+1)(1+x−1)(1+x+1)=x(1+x+1)(1+x)−1=x(1+x+1)x=1+x+11.
- As x→0: 1+11=21. …
- AP EAPCET 2025Set eng-2025-05-23-AN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧(1+sinx)cosecx,a,ae2/x+be3/xe2/x+e3/x,−π/2<x<0x=00<x<π/2 is continuous at x = 0, then ab= (A) e (B) e2 (C) 1 (D) −1
›Reveal solutionSolution
The left-hand limit is the classical 1∞ form giving e, fixing a=e;
the right-hand limit needs dividing by the dominant exponential to fix b.
Continuity forces both, and ab=1.
Concept and Intuition
A piecewise function is continuous at a point only if the left-hand limit,
right-hand limit, and the function's value there all agree. Here the left
piece is a 1∞ indeterminate form (standard trick: exponentiate and use
log(1+u)∼u), and the right piece is a ratio of two exponentials growing at
different rates as x→0+ (since 1/x→+∞), so the faster-growing
exponential e3/x dominates and everything else becomes negligible after
dividing through by it.
Step-by-Step Solution
- Left limit: L=limx→0−(1+sinx)cosecx. Take logs: logL=limcosecx⋅log(1+sinx)=limsinxsinx(1+O(sinx))→1. So L=e. Continuity requires f(0)=a=L=e.
- Right limit: R=limx→0+ae2/x+be3/xe2/x+e3/x. Divide numerator and denominator by e3/x: R=limx→0+ae−1/x+be−1/x+1. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2021Set eng-2021-08-25-FN1 markMCQQ.If the function defined by f(x)=x2log(1+x)1+x−x1, x=0 is continuous at x=0, then 6f(0)= ______ (A) 2 (B) 3 (C) 1 (D) 6
›Reveal solutionSolution
Expand log(1+x) as a Taylor series to resolve the 0/0-type limit and identify the continuous value f(0).
Concept and Intuition
f is defined by a formula that's indeterminate at x=0; continuity forces f(0) to equal the limiting value as x→0, which we extract via the Taylor series of log(1+x).
Step-by-Step Solution
- f(x)=x2log[(1+x)1+x]−x1=x2(1+x)log(1+x)−x1.
- Expand log(1+x)=x−2x2+3x3−⋯.
- (1+x)log(1+x)=(x−2x2+3x3)+(x2−2x3)+O(x4)=x+2x2−6x3+O(x4).
- Divide by x2: x1+21−6x+O(x2).
- Subtract x1: f(x)=21−6x+O(x2)→21 as x→0. …
- AP EAPCET 2021Set eng-2021-08-23-AN1 markMCQQ.If the function f(x), defined below, is continuous everywhere, then 'k' equals ______ f(x)=⎩⎨⎧1+x−12x−1,k,−1≤x<∞,x=0x=0 (A) 21loge2 (B) loge4 (C) loge8 (D) loge2
›Reveal solutionSolution
Continuity at x=0 requires k to equal the limit of f(x) as x→0, which works out to ln4 using standard small-x approximations.
Concept and Intuition
For f to be continuous at x=0, we need x→0limf(x)=f(0)=k. Both numerator and denominator vanish as x→0 (this is a 0/0 form), so we use the standard first-order approximations 2x−1≈xln2 and 1+x−1≈x/2 near x=0.
Step-by-Step Solution
- Numerator: 2x−1=exln2−1≈xln2 for small x.
- Denominator: 1+x−1=(1+x)1/2−1≈2x for small x (binomial expansion).
- So x→0lim1+x−12x−1=x→0limx/2xln2=2ln2. …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If f:R→R defined by f(x)=⎩⎨⎧xsinx−sin2x,x3/2x2+x−x,x<0x>0 is continuous on R, then f(0)= (A) 1/2 (B) 3/2 (C) 1 (D) −1
›Reveal solutionSolution
This tests continuity of a piecewise function at the junction point using standard small-x approximations; both one-sided limits equal 1/2.
Concept and Intuition
A piecewise function is continuous at a boundary point only if the left-hand limit, right-hand limit, and the defined value at that point all agree. Here f(0) isn't given directly by either branch (both blow up as 0/0), so we must compute the limits from each side and set f(0) equal to their common value.
Step-by-Step Solution
- Left-hand limit (x→0−):
limx→0−xsinx−sin(x/2)
Use the small-angle expansion sint=t−6t3+⋯:
sinx−sin2x=(x−6x3)−(2x−48x3)+⋯=2x+O(x3)
Dividing by x: the limit is 21.
- Right-hand limit (x→0+):
limx→0+x3/2x2+x−x=limx→0+x3/2x(x+1−1)=limx→0+xx+1−1
Using 1+x≈1+2x−8x2+⋯:
xx+1−1≈xx/2=21 …
- AP EAPCET 2026Set eng-2026-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧(2+5x22+3x2)x28+3,k,for x=0for x=0 is a continuous function at x=0, then k= (A) e−2 (B) e−4 (C) e−8 (D) e−16
›Reveal solutionSolution
This tests the standard 1∞ exponential limit technique. Taking logs and expanding to first order in x2 gives k=e−8.
Concept and Intuition
Expressions of the form (base →1)power→∞ are evaluated by writing L=elim(power)⋅log(base) and expanding log(1+u)≈u for the small quantity u= base−1. The constant added to the exponent (here +3) never survives, since it multiplies a term that itself →0.
Step-by-Step Solution
- For continuity at x=0: k=limx→0(2+5x22+3x2)8/x2+3.
- Let L denote this limit. Then logL=limx→0(x28+3)log(2+5x22+3x2).
- Write the base as 1+u where u=2+5x22+3x2−1=2+5x2−2x2≈−x2 for small x (to leading order).
- log(1+u)≈u≈−x2 for small x. …
- AP EAPCET 2024Set eng-2024-05-20-AN1 markMCQQ.The values of a and b for which the function f(x)=⎩⎨⎧1+∣sinx∣a/∣sinx∣,b,etan2x/tan3x,6−π<x<0x=00<x<6π is continuous at x=0 are (A) a=1,b=32 (B) a=32,b=e2/3 (C) a=32,b=23 (D) a=−1,b=e2/3
›Reveal solutionSolution
Both one-sided limits must equal b; the right side gives e2/3 directly, and the left side (a (1+u)1/u→e-type limit) matches it when a=2/3 — (B).
Concept and Intuition
Continuity at x=0 requires x→0−limf(x)=f(0)=x→0+limf(x). The right branch is a standard eratio of small angles limit, and the left branch is the classical exponential limit (1+u)1/u→e as u→0, raised to a power a.
Step-by-Step Solution
- Right-hand limit: as x→0+, tan2x≈2x and tan3x≈3x, so tan3xtan2x→32. Hence x→0+limetan2x/tan3x=e2/3.
- Left-hand limit: let u=∣sinx∣→0+ as x→0−. The left branch is (1+u)a/u=[(1+u)1/u]a. Since (1+u)1/u→e, this tends to ea.
- For continuity: left limit = right limit =f(0)=b, i.e. ea=e2/3=b. …
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
- AP EAPCET 2023Set eng-2023-05-18-AN1 markMCQQ.Let Sn=1+3x+9x2+27x3+…n terms and −31<x<31. If limn→∞Sn=f(x), then f(x) is discontinuous at the point x= (A) 0 (B) 31 (C) 1 (D) −1
›Reveal solutionSolution
The infinite geometric series sums to f(x)=1/(1−3x) on (−1/3,1/3), and this function has an infinite discontinuity exactly at x=1/3, the edge of the interval where the series stops converging.
Concept and Intuition
An infinite geometric series 1+r+r2+… converges to 1−r1 only when ∣r∣<1; as r→1 this sum diverges to infinity. Here r=3x, so the series converges for ∣x∣<1/3 and the resulting closed-form function has a vertical asymptote right at the boundary x=1/3.
Step-by-Step Solution
- Sn=1+3x+(3x)2+⋯+(3x)n−1, a geometric series with first term 1 and common ratio 3x.
- Sum: Sn=1−3x1−(3x)n (for 3x=1).
- For −31<x<31, ∣3x∣<1, so (3x)n→0 as n→∞.
- Hence f(x)=limn→∞Sn=1−3x1.
- This function f(x)=1−3x1 is undefined/blows up exactly where 1−3x=0, i.e. x=31 — an infinite discontinuity right at the edge of the domain of convergence. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.