Q.Find whether the function is continuous or discontinuous at the indicated point: f(x)=⎩⎨⎧(x−a)sinx−a1,0,x=ax=a at x=a.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity At A Point — A function f is continuous at x=a if limx→af(x)=f(a).
Step 1: Check f(a). From the definition, f(a)=0.
Step 2: Evaluate limx→af(x). For x=a, we have f(x)=(x−a)sinx−a1. As x→a, the factor (x−a)→0, while sinx−a1 oscillates between −1 and 1 (bounded). By the Squeeze Theorem:
−∣x−a∣≤(x−a)sinx−a1≤∣x−a∣ …
The function is continuous at x=a because the limit as x→a exists and equals the function value f(a)=0, due to the Squeeze Theorem.
Why This Problem Matters
Continuity at a point is a three-part test:
- The function must be defined at the point.
- The limit must exist as x approaches that point.
- The limit must equal the function value.
Here, the function is defined piecewise — a "normal" expression for x=a and a separate value at x=a. The only potential trouble is whether the limit matches the assigned value. The trick is that the expression (x−a)sinx−a1 involves a sine of something that blows up, but it's multiplied by something that shrinks to zero. That's a classic squeeze-play situation.
Step-by-Step Solution
1. Check the function value at x=a
From the definition, f(a)=0. So condition (1) is satisfied.
2. Examine the limit as x→a
We need x→alimf(x). For x=a, f(x)=(x−a)sinx−a1.
As x→a, the factor (x−a)→0. The sine factor, however, oscillates wildly between −1 and 1 because its argument x−a1 goes to ±∞. So we cannot directly substitute.
3. Use the Squeeze Theorem
We know that for any real t, −1≤sint≤1. Therefore, for x=a:
−∣x−a∣≤(x−a)sinx−a1≤∣x−a∣
Both the lower bound −∣x−a∣ and the upper bound ∣x−a∣ approach 0 as x→a. …
Method: Constructing a Squeeze-Theorem Bound Around a General Point x=a
This is the general procedure for handling a limit of the form (x−a)⋅h(x−a1), where h is a bounded oscillating function (sine or cosine) — the same core idea as bounding-and-squeezing, but written so it applies at any point a, not just x=0.
Steps
Step 1: Isolate the vanishing factor and the oscillating factor.
Here the vanishing factor is (x−a), which tends to 0 as x→a by definition; the oscillating factor is sin(x−a1), whose argument grows without bound as x→a, so the factor itself has no limit.
Step 2: Use the universal bound on sine, −1≤sin(⋅)≤1, and translate it into a bound on the whole product using absolute values rather than a direct inequality (this avoids sign issues when (x−a) can be negative).
Since sin(x−a1)≤1 for all valid inputs, …
Common Mistakes
Mistake 1: Believing the limit fails to exist because sinx−a1 has no limit as x→a.
Why it's wrong: exactly as with a bare oscillating factor, the vanishing factor (x−a) tames the unbounded oscillation of sinx−a1; the product's limit exists and equals 0 even though the sine factor by itself never settles. Correct approach: isolate the vanishing linear factor and bound the whole product using ∣sin(⋅)∣≤1, rather than trying to evaluate the oscillating part directly.
Mistake 2: Forgetting that the bound must use ∣x−a∣, not (x−a), since (x−a) can be negative. …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2025Set eng-2025-05-27-FN1 markMCQQ.If the function f defined by f(x)=⎩⎨⎧x21−cos4x,a,16+x−4x,x<0x=0x>0 is continuous at x=0, then a= (A) 1 (B) 2 (C) 4 (D) 8
›Reveal solutionSolution
Continuity at x=0 requires the left limit, the right limit, and f(0)=a to all agree; both one-sided limits work out to 8. Answer: a=8.
Concept and Intuition
For a piecewise function to be continuous at a junction point, the value defined there (a) must equal both the limit approaching from the left and the limit approaching from the right. Each side here needs a standard trick: the trig side uses the double-angle identity 1−cosθ=2sin2(θ/2), and the surd side needs rationalisation to remove the − indeterminate form.
Step-by-Step Solution
- Left-hand limit (x→0−): 1−cos4x=2sin2(2x), so
limx→0−x21−cos4x=limx→0−x22sin2(2x)=2limx→0(2xsin2x)2⋅4=2⋅1⋅4=8.
- Right-hand limit (x→0+): rationalise 16+x−4x by multiplying top and bottom by 16+x+4: (16+x)−16x(16+x+4)=xx(16+x+4)=16+x+4. …
- AP EAPCET 2025Set eng-2025-05-21-AN1 markMCQQ.If a function f defined by f(x)=⎩⎨⎧x21−cos4x,a,16+x−4x,x<0x=0x>0 is continuous at x=0, then a= (A) 8 (B) 4 (C) 3 (D) 2
›Reveal solutionSolution
Both one-sided limits at x=0 evaluate to 8 (via 1−cosθ=2sin2(θ/2) on the left, and rationalizing on the right), so a=8.
Concept and Intuition
For f to be continuous at 0, the left-hand limit, right-hand limit, and f(0)=a must all agree. The left piece is a classic 0/0 trig limit solved via the half-angle identity for 1−cosθ; the right piece is a classic surd limit solved by rationalizing the denominator.
Step-by-Step Solution
- Left limit: 1−cos4x=2sin2(2x), so x21−cos4x=x22sin2(2x)=8(2xsin2x)2.
- As x→0−, 2xsin2x→1, so this limit →8(1)2=8.
- Right limit: let t=x (so t→0+ as x→0+): 16+x−4x=16+t−4t.
- Rationalize: multiply by 16+t+416+t+4: (16+t)−16t(16+t+4)=tt(16+t+4)=16+t+4. …
- AP EAPCET 2024Set eng-2024-05-23-FN1 markMCQQ.If f(x)=⎩⎨⎧a+x−a−xa2−ax+x2−x2+ax+a2,K,x=0x=0 is continuous at x=0, then K= (A) −a (B) a (C) −1 (D) a+a
›Reveal solutionSolution
This is a 0/0 form at x=0; rationalizing both the numerator and denominator turns it into a clean limit that evaluates to −a.
Concept and Intuition
Whenever both numerator and denominator vanish at the point of interest, multiplying each by its conjugate surd converts the difference-of-square-roots into a simple polynomial difference, which then cancels the common factor causing the indeterminacy.
Step-by-Step Solution
- Let N(x)=a2−ax+x2−a2+ax+x2. Multiply and divide by the conjugate:
N(x)=a2−ax+x2+a2+ax+x2(a2−ax+x2)−(a2+ax+x2)=a2−ax+x2+a2+ax+x2−2ax
- Let D(x)=a+x−a−x. Similarly,
D(x)=a+x+a−x(a+x)−(a−x)=a+x+a−x2x
- So f(x)=D(x)N(x)=a2−ax+x2+a2+ax+x2−2ax×2xa+x+a−x. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=⎩⎨⎧2−xx2−4,a,log(x−2),for x<2for x=2for x>2 is a real valued function and 'a' is a finite real number, then (A) f is continuous at x = 2 when a = 0 (B) f is left continuous at x = 2 when a = 0 (C) f is right continuous at x = 2 when a = log 2 (D) f is not continuous at x = 1
›Reveal solutionSolution
This tests one-sided limits at a piecewise junction; the left-hand limit at x=2 is 0 while the right-hand limit diverges to −∞, so option (B) is the only correct statement.
Concept and Intuition
For left continuity at x=2 we only need limx→2−f(x)=f(2); the behaviour on the other side is irrelevant. Since log(x−2)→−∞ as x→2+, no finite value of a can make f right-continuous or fully continuous at x=2 — so those statements must be false.
Step-by-Step Solution
- Left-hand limit: let x=2−h, h→0+. Then x2−4=(2−h)2−4=h2−4h=h(h−4) and 2−x=h.
- So 2−xx2−4=hh(h−4)=h(h−4)→0⋅(−4)=0.
- Left continuity at x=2 requires f(2)=a to equal this limit, i.e. a=0. So (B) is true.
- Right-hand limit: as x→2+, x−2→0+, so log(x−2)→−∞ — unbounded, so no finite a (in particular a=log2) can match it. So (C) is false, and (A) (needing both sides equal) is also false. …
- AP EAPCET 2023Set eng-2023-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧x−2x−[x],b,a(2+x−x2)∣x2−x−2∣,2a−b,x>2x=2−1<x≤2x≤−1 is continuous on R, then x→0limx2sin2ax+xtanbx= (A) 0 (B) 1 (C) 2 (D) 3
›Reveal solutionSolution
Continuity of the piecewise function pins down a=1,b=1; substituting these into the limit expression and using standard small-angle limits gives 2.
Concept and Intuition
For a piecewise function to be continuous at a junction point, the one-sided limits and the defined value there must all agree. Here the junctions at x=2 and x=−1 give the equations needed to solve for the unknown constants a,b before the actual limit can be evaluated.
Step-by-Step Solution
- Right limit at x=2: for x slightly >2, [x]=2, so f(x)=x−2x−2=1. So limx→2+f(x)=1.
- Left limit at x=2 (third piece): x2−x−2=(x−2)(x+1) and 2+x−x2=−(x−2)(x+1). For x near 2−: (x−2)<0,(x+1)>0, so ∣x2−x−2∣=(2−x)(x+1) and 2+x−x2=(2−x)(x+1) too. So the ratio simplifies to a1 throughout (−1,2).
- Continuity at x=2: 1=b=a1⇒a=1, b=1.
- Check at x=−1: piece 4 value =2a−b=2−1=1; piece 3's limit as x→−1+ is also a1=1. Consistent ✓. …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If f:R→R defined by f(x)=⎩⎨⎧xsinx−sin2x,x3/2x2+x−x,x<0x>0 is continuous on R, then f(0)= (A) 1/2 (B) 3/2 (C) 1 (D) −1
›Reveal solutionSolution
This tests continuity of a piecewise function at the junction point using standard small-x approximations; both one-sided limits equal 1/2.
Concept and Intuition
A piecewise function is continuous at a boundary point only if the left-hand limit, right-hand limit, and the defined value at that point all agree. Here f(0) isn't given directly by either branch (both blow up as 0/0), so we must compute the limits from each side and set f(0) equal to their common value.
Step-by-Step Solution
- Left-hand limit (x→0−):
limx→0−xsinx−sin(x/2)
Use the small-angle expansion sint=t−6t3+⋯:
sinx−sin2x=(x−6x3)−(2x−48x3)+⋯=2x+O(x3)
Dividing by x: the limit is 21.
- Right-hand limit (x→0+):
limx→0+x3/2x2+x−x=limx→0+x3/2x(x+1−1)=limx→0+xx+1−1
Using 1+x≈1+2x−8x2+⋯:
xx+1−1≈xx/2=21 …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2023Set eng-2023-05-19-FN1 markMCQQ.If a function f(x) defined on [a,b] is discontinuous at x=α∈(a,b), then (A) x→α−limf(x)=x→α+limf(x)=f(α) (B) x→αlimf(x)=f(α) (C) x→a−limf(x)=f(a) (D) x→b+limf(x)=f(b)
›Reveal solutionSolution
Discontinuity at an interior point is, by definition, the failure of "limit equals function value" there.
Concept and Intuition
A function is continuous at α iff limx→αf(x)=f(α) (which subsumes both one-sided limits agreeing with each other and with f(α)). Discontinuity is simply the negation of this statement.
Step-by-Step Solution
- Continuity at α∈(a,b) means limx→α−f(x)=limx→α+f(x)=f(α) — this is option (A), which must be false since f is given to be discontinuous at α.
- The negation of continuity is exactly: the limit at α (however it behaves) is not equal to f(α) — option (B). …
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.Which one of the following function is discontinuous at x=1? (A) f(x)=sin2x+tan2x+cos2x−sec2x (B) f(x)=1+2sinx1 (C) f(x)=⎩⎨⎧∣x−1∣+2(x−1)2x−1,1,x=1x=1 (D) f(x)=ex+5
›Reveal solutionSolution
Options (A), (B), (D) simplify to functions that are continuous everywhere; option (C)'s one-sided limits at x=1 disagree (+1 from the right, −1 from the left), so it alone is discontinuous at x=1.
Concept and Intuition
For piecewise/rational-looking expressions, check whether the identity sin2x+cos2x=1 and sec2x−tan2x=1 collapse them to constants (continuous), whether a denominator can vanish, and — for absolute-value expressions — whether the left and right limits genuinely agree.
Step-by-Step Solution
- (A) f(x)=sin2x+tan2x+cos2x−sec2x=(sin2x+cos2x)−(sec2x−tan2x)=1−1=0 for all x where tan,sec are defined; at x=1 (radian) cos1=0, so it's fine and continuous (≡0 near x=1).
- (B) f(x)=1+2sinx1: since 2sinx>0 always, the denominator never vanishes (≥1+2−1=1.5); continuous everywhere, including x=1.
- (C) For x=1, let t=x−1: f=∣t∣+2t2t.
- As t→0+ (x→1+): ∣t∣=t, so f=t+2t2t=1+2t1→1.
- As t→0− (x→1−): ∣t∣=−t, so f=−t+2t2t=−1+2t1→−1. …
- AP EAPCET 2024Set eng-2024-05-20-AN1 markMCQQ.The values of a and b for which the function f(x)=⎩⎨⎧1+∣sinx∣a/∣sinx∣,b,etan2x/tan3x,6−π<x<0x=00<x<6π is continuous at x=0 are (A) a=1,b=32 (B) a=32,b=e2/3 (C) a=32,b=23 (D) a=−1,b=e2/3
›Reveal solutionSolution
Both one-sided limits must equal b; the right side gives e2/3 directly, and the left side (a (1+u)1/u→e-type limit) matches it when a=2/3 — (B).
Concept and Intuition
Continuity at x=0 requires x→0−limf(x)=f(0)=x→0+limf(x). The right branch is a standard eratio of small angles limit, and the left branch is the classical exponential limit (1+u)1/u→e as u→0, raised to a power a.
Step-by-Step Solution
- Right-hand limit: as x→0+, tan2x≈2x and tan3x≈3x, so tan3xtan2x→32. Hence x→0+limetan2x/tan3x=e2/3.
- Left-hand limit: let u=∣sinx∣→0+ as x→0−. The left branch is (1+u)a/u=[(1+u)1/u]a. Since (1+u)1/u→e, this tends to ea.
- For continuity: left limit = right limit =f(0)=b, i.e. ea=e2/3=b. …
- AP EAPCET 2025Set eng-2025-05-23-AN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧(1+sinx)cosecx,a,ae2/x+be3/xe2/x+e3/x,−π/2<x<0x=00<x<π/2 is continuous at x = 0, then ab= (A) e (B) e2 (C) 1 (D) −1
›Reveal solutionSolution
The left-hand limit is the classical 1∞ form giving e, fixing a=e;
the right-hand limit needs dividing by the dominant exponential to fix b.
Continuity forces both, and ab=1.
Concept and Intuition
A piecewise function is continuous at a point only if the left-hand limit,
right-hand limit, and the function's value there all agree. Here the left
piece is a 1∞ indeterminate form (standard trick: exponentiate and use
log(1+u)∼u), and the right piece is a ratio of two exponentials growing at
different rates as x→0+ (since 1/x→+∞), so the faster-growing
exponential e3/x dominates and everything else becomes negligible after
dividing through by it.
Step-by-Step Solution
- Left limit: L=limx→0−(1+sinx)cosecx. Take logs: logL=limcosecx⋅log(1+sinx)=limsinxsinx(1+O(sinx))→1. So L=e. Continuity requires f(0)=a=L=e.
- Right limit: R=limx→0+ae2/x+be3/xe2/x+e3/x. Divide numerator and denominator by e3/x: R=limx→0+ae−1/x+be−1/x+1. …
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.