Chemistry · Class 12 Science
Ch 14The p-Block Elements — Class 12 Chemistry, concept-first.
Group 15 of the periodic table is headed by nitrogen and continues through phosphorus, arsenic, antimony, bismuth, and the synthetic element moscovium. Moving down the group, the character of the elements gradually changes from non-metallic to metallic, passing through an intermediate metalloidic stage on the way.
Key concepts
Hover a concept to preview it and jump to its most relevant Q&A.
Nitrogen Family - General Characteristics
Group 15 elements (N, P, As, Sb, Bi) share the outer electronic configuration , a half-filled p-subshell that gives unusually high ionisation enthalpy and small atomic size at the top of the group.
Most relevant Q&A
- Though nitrogen exhibits +5 oxidation state, it does not form pentahalide. Give reason.Free
- Discuss the general characteristics of Group 15 elements with reference to their electronic configuration, oxidation state, atomic size, ion…Free
- Why does the reactivity of nitrogen differ from phosphorus?Free
- Discuss the trends in chemical reactivity of group 15 elements.Free
- Explain why NH3 is basic while BiH3 is only feebly basic.Preview
In previous exams
How often this chapter’s concepts have been examined — real appearance data, never estimated.
Chapter contents
The NCERT structure, section by section. Open a section to see its questions, then read the concept-first solution.
Group 15 Elements
Group 15 of the periodic table is headed by nitrogen and continues through phosphorus, arsenic, antimony, bismuth, and the synthetic element moscovium.
Occurrence
Molecular nitrogen, , makes up about 78% of the atmosphere by volume, making it by far the largest reservoir of the element.
Electronic Configuration
Every element of Group 15 carries the same valence-shell electronic configuration, . The subshell is completely filled while the three orbitals each hold exactly one electron, giving a symmetrical, ha…
Atomic and Ionic Radii
Both the covalent radius and the ionic radius (measured in a given oxidation state) grow larger on descending Group 15, as expected from the addition of successive electron shells.
Ionisation Enthalpy
Ionisation enthalpy falls steadily on moving down Group 15, a direct consequence of the gradual increase in atomic size, which pulls the outermost electron further from the nucleus and makes it easier…
Electronegativity
Electronegativity in Group 15 broadly decreases on going down the group, tracking the steady increase in atomic size — a larger atom holds a shared pair of electrons less tightly.
Physical Properties
Every element in Group 15 is polyatomic in its elemental form, but dinitrogen is the odd one out — it exists as the diatomic gas , whereas all the other members of the group are solids at room tempera…
Chemical Properties
The elements of Group 15 most commonly display the oxidation states , and . Descending the group, size and metallic character both increase, and this steadily weakens the tendency to adopt the state —…
Dinitrogen
Dinitrogen is manufactured on an industrial scale by liquefying air and then separating it by fractional distillation: liquid nitrogen, which boils at the lower temperature of 77.2 K, distils off firs…
+−Worked Examplesi1 question
Ammonia
Small amounts of ammonia are present naturally in air and soil, produced by the decay of nitrogen-containing organic matter such as urea:
+−Worked Examplesi1 question
Oxides of Nitrogen
Nitrogen is unusual in forming a whole family of oxides spanning almost every oxidation state from to .
+−Worked Examplesi1 question
Nitric Acid
Nitrogen forms a small family of oxoacids — hyponitrous acid (), nitrous acid (), and nitric acid () — of which nitric acid is by far the most important.
Phosphorus — Allotropic Forms
Elemental phosphorus does not exist as a single form — it occurs as several allotropes, of which white, red and black phosphorus are the most important.
Phosphine
Phosphine () is the simplest hydride of phosphorus, and both its preparation and its chemistry closely parallel — while also contrasting with — ammonia.
+−Worked Examplesi1 question
Phosphorus Halides
Beyond its hydride, phosphorus forms an extensive series of halides with the halogens. Two general families exist, distinguished by the oxidation state of phosphorus: the trihalides (formed with all f…
Phosphorus Trichloride
Phosphorus trichloride () is the most important of the phosphorus trihalides.
+−Worked Examplesi1 question
Phosphorus Pentachloride
Phosphorus pentachloride () is the best-known phosphorus pentahalide and an important chlorinating agent in the laboratory.
+−Worked Examplesi1 question
Oxoacids of Phosphorus
Phosphorus forms a rich family of oxoacids, summarised in Table 7.5 along with their formulas, oxidation states, characteristic bonds, and how each is prepared.
+−Worked Examplesi1 question
Group 16 Elements
Moving from Group 15 to the next column of the p-block, Group 16 comprises oxygen, sulphur, selenium, tellurium, polonium and the synthetic element livermorium.
Occurrence
Oxygen is the single most abundant element on Earth. It makes up about 46.6% by mass of the earth's crust, and dry air itself is 20.946% oxygen by volume — the element most of terrestrial chemistry an…
Electronic Configuration
Every element of Group 16 has six electrons in its outermost shell, giving the general valence configuration .
Atomic and Ionic Radii
As with every group of the periodic table, moving down Group 16 adds successive electron shells, so both the atomic radius and the ionic radius () increase steadily from oxygen to polonium (see Table…
Ionisation Enthalpy
Ionisation enthalpy decreases down Group 16, the expected consequence of increasing atomic size — the outermost electron sits progressively farther from the nucleus and is easier to remove.
Electron Gain Enthalpy
Electron gain enthalpy in Group 16 does not fall into a single simple trend. Oxygen, despite being the most electronegative element in the group, has a less negative electron gain enthalpy than sulphu…
Electronegativity
Oxygen has the second-highest electronegativity of any element, exceeded only by fluorine. Moving down Group 16, electronegativity decreases steadily with increasing atomic number, from oxygen through…
Physical Properties
The physical properties collected in Table 7.6 reveal a clear metal–nonmetal transition running down Group 16: oxygen and sulphur are non-metals, selenium and tellurium are metalloids, and polonium is…
Chemical Properties
Group 16 elements display a wide range of oxidation states (Table 7.6). The stability of the state falls steadily down the group, and polonium barely shows it at all.
+−Worked Examplesi1 question
Dioxygen
Dioxygen () is the elemental, molecular form in which oxygen is normally encountered, and it is central both to laboratory chemistry and to industrial gas production.
Simple Oxides
When oxygen combines with any other element, the resulting binary compound is called an oxide. Because oxygen forms compounds with almost every element in the periodic table, oxides are extremely nume…
Ozone
Ozone, , is an allotropic form of dioxygen that is far more reactive than and therefore does not persist for long once formed at ground level.
Sulphur — Allotropic Forms
Sulphur exhibits numerous allotropes — different structural forms of the same element — of which the yellow rhombic (-sulphur) and monoclinic (-sulphur) forms are by far the most important.
+−Worked Examplesi1 question
Sulphur Dioxide
Burning sulphur in air or oxygen produces sulphur dioxide along with a small amount (6–8%) of sulphur trioxide as a by-product: In the laboratory, is conveniently generated by treating a sulphite salt…
Oxoacids of Sulphur
Sulphur forms a remarkably wide range of oxoacids, including (sulphurous acid), (thiosulphuric acid), , , the family (with to ), (sulphuric acid), (pyrosulphuric acid, i.e.
Sulphuric Acid
Sulphuric acid ranks among the most important industrial chemicals produced anywhere in the world — a nation's industrial strength is sometimes judged by how much sulphuric acid it manufactures and co…
Group 17 Elements
Group 17 of the periodic table brings together fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and the radioactive elements astatine (At) and tennessine (Ts).
Occurrence
Fluorine and chlorine occur fairly abundantly in nature, while bromine and iodine are comparatively scarce.
Electronic Configuration
All noble gases have completely filled valence shells — helium is and every other member has the general configuration (e.g. neon , argon ).
Atomic and Ionic Radii
Within their respective periods, the halogens have the smallest atomic radii of any group, a consequence of the maximum effective nuclear charge they experience relative to other elements in the same…
Ionisation Enthalpy
Because the halogens sit only one electron short of a stable noble-gas configuration, they show very little inclination to give up an electron of their own — and this shows up as a very high ionisatio…
Electron Gain Enthalpy
Halogens record the most negative electron gain enthalpies of any elements in their respective periods — unsurprising, since accepting one more electron completes their octet and gives them a noble-ga…
Electronegativity
Since the noble gases have a complete octet and essentially no tendency to attract a shared pair of electrons, electronegativity is not normally defined for most of them — a value is only meaningful f…
Physical Properties
The halogens show textbook-smooth trends in their physical behaviour. At room temperature, fluorine and chlorine are gases, bromine is a liquid, and iodine is a solid — and both melting and boiling po…
Chemical Properties
Every halogen shows the –1 oxidation state, simply by picking up the one electron it needs to complete its octet.
Chlorine
Chlorine was first isolated in 1774 by Scheele, who obtained it by reacting hydrochloric acid with manganese dioxide.
Hydrogen Chloride
Hydrogen chloride was first prepared by Glauber in 1648, who heated common salt with concentrated sulphuric acid.
Oxoacids of Halogens
Because of its high electronegativity and small atomic size, fluorine forms only a single oxoacid: HOF, known as fluoric(I) acid or hypofluorous acid.
Interhalogen Compounds
When two different halogens combine directly, they produce an interhalogen compound. Because halogens differ in size and electronegativity, these compounds always pair a larger, more electropositive h…
+−Worked Examplesi1 question
Group 18 Elements
Group 18 of the periodic table brings together helium, neon, argon, krypton, xenon, radon and oganesson.
Occurrence
With the exception of radon and the synthetic element oganesson, every noble gas occurs naturally in the atmosphere.
+−Worked Examplesi1 question
Electronic Configuration
Every noble gas except helium shares the same valence-shell pattern, — a completely filled outer and subshell.
Ionisation Enthalpy
Because their electronic configuration is so stable, noble gas atoms hold onto their electrons unusually tightly, giving the group very high ionisation enthalpies — among the highest of any elements i…
Atomic Radii
Moving down Group 18, from helium to radon, atomic radius increases steadily — visible directly in Table 7.12, where the radius grows from 120 pm for He to 220 pm for Xe.
Electron Gain Enthalpy
Since a noble gas atom already has a completely filled, exceptionally stable electronic configuration, it has essentially no inclination to accept an additional electron — doing so would force that ex…
Physical Properties
All members of Group 18 exist as single, uncombined atoms (monoatomic gases) rather than as diatomic or polyatomic molecules — a direct consequence of their filled-shell inertness, since there is no d…
+−Worked Examplesi1 question
Chemical Properties
Noble gases are, as a rule, the least chemically reactive elements in the periodic table. Two structural reasons explain this inertness:
+−Worked Examplesi1 question
Exercises
+−Show 40 questionsHide questions40 questions
- 7.1Discuss the general characteristics of Group 15 elements with reference to their electronic configuration, oxidation state, atomic size, ion…Free
- 7.2Why does the reactivity of nitrogen differ from phosphorus?Free
- 7.3Discuss the trends in chemical reactivity of group 15 elements.Free
- 7.4Why does NH3 form hydrogen bond but PH3 does not?Preview
- 7.5How is nitrogen prepared in the laboratory? Write the chemical equations of the reactions involved.Preview
- 7.6How is ammonia manufactured industrially?Preview
- 7.7Illustrate how copper metal can give different products on reaction with HNO3.Preview
- 7.8Give the resonating structures of NO2 and N2O5.Preview
- 7.9The HNH angle value is higher than HPH, HAsH and HSbH angles. Why? [Hint: Can be explained on the basis of sp3 hybridisation in NH3 and only…Preview
- 7.10Why does R3P = O exist but R3N = O does not (R = alkyl group)?Preview
- 7.11Explain why NH3 is basic while BiH3 is only feebly basic.Preview
- 7.12Nitrogen exists as diatomic molecule and phosphorus as P4. Why?Preview
- 7.13Write main differences between the properties of white phosphorus and red phosphorus.Preview
- 7.14Why does nitrogen show catenation properties less than phosphorus?Preview
- 7.15Give the disproportionation reaction of H3PO3.Preview
- 7.16Can PCl5 act as an oxidising as well as a reducing agent? Justify.Preview
- 7.17Justify the placement of O, S, Se, Te and Po in the same group of the periodic table in terms of electronic configuration, oxidation state a…Preview
- 7.18Why is dioxygen a gas but sulphur a solid?Preview
- 7.19Knowing the electron gain enthalpy values for O → O- and O → O2- as –141 and 702 kJ mol-1 respectively, how can you account for the formatio…Preview
- 7.20Which aerosols deplete ozone?Preview
- 7.21Describe the manufacture of H2SO4 by contact process?Preview
- 7.22How is SO2 an air pollutant?Preview
- 7.23Why are halogens strong oxidising agents?Preview
- 7.24Explain why fluorine forms only one oxoacid, HOF.Preview
- 7.25Explain why inspite of nearly the same electronegativity, nitrogen forms hydrogen bonding while chlorine does not.Preview
- 7.26Write two uses of ClO2.Preview
- 7.27Why are halogens coloured?Preview
- 7.28Write the reactions of F2 and Cl2 with water.Preview
- 7.29How can you prepare Cl2 from HCl and HCl from Cl2? Write reactions only.Preview
- 7.30What inspired N. Bartlett for carrying out reaction between Xe and PtF6?Preview
- 7.31What are the oxidation states of phosphorus in the following: (i) H3PO3 (ii) PCl3 (iii) Ca3P2 (iv) Na3PO4 (v) POF3?Preview
- 7.32Write balanced equations for the following: (i) NaCl is heated with sulphuric acid in the presence of MnO2. (ii) Chlorine gas is passed into…Preview
- 7.33How are xenon fluorides XeF2, XeF4 and XeF6 obtained?Preview
- 7.34With what neutral molecule is ClO- isoelectronic? Is that molecule a Lewis base?Preview
- 7.35How are XeO3 and XeOF4 prepared?Preview
- 7.36Arrange the following in the order of property indicated for each set: (i) F2, Cl2, Br2, I2 - increasing bond dissociation enthalpy. (ii) HF…Preview
- 7.37Which one of the following does not exist? (i) XeOF4 (ii) NeF2 (iii) XeF2 (iv) XeF6Preview
- 7.38Give the formula and describe the structure of a noble gas species which is isostructural with: (i) ICl4- (ii) IBr2- (iii) BrO3-Preview
- 7.39Why do noble gases have comparatively large atomic sizes?Preview
- 7.40List the uses of neon and argon gases.Preview
More questions
+−Show 34 questionsHide questions34 questions
- Q1Why are pentahalides of P, As, Sb and Bi more covalent than their trihalides?Free
- Q2Why is BiH3 the strongest reducing agent amongst all the hydrides of Group 15 elements ?Free
- Q3Why is N2 less reactive at room temperature?Free
- Q4Mention the conditions required to maximise the yield of ammonia.Preview
- Q5How does ammonia react with a solution of Cu2+?Preview
- Q6What is the covalence of nitrogen in N2O5 ?Preview
- Q7(a) Bond angle in PH4+ is higher than that in PH3. Why? (b) What is formed when PH3 reacts with an acid?Preview
- Q8What happens when white phosphorus is heated with concentrated NaOH solution in an inert atmosphere of CO2 ?Preview
- Q9What happens when PCl5 is heated?Preview
- Q10Write a balanced equation for the reaction of PCl5 with water.Preview
- Q11What is the basicity of H3PO4?Preview
- Q12What happens when H3PO3 is heated?Preview
- Q13List the important sources of sulphur.Preview
- Q14Write the order of thermal stability of the hydrides of Group 16 elements.Preview
- Q15Why is H2O a liquid and H2S a gas ?Preview
- Q16Which of the following does not react with oxygen directly? Zn, Ti, Pt, FePreview
- Q17Complete the following reactions: (i) C2H4 + O2 -> (ii) 4Al + 3 O2 ->Preview
- Q18Why does O3 act as a powerful oxidising agent?Preview
- Q19How is O3 estimated quantitatively?Preview
- Q20What happens when sulphur dioxide is passed through an aqueous solution of Fe(III) salt?Preview
- Q21Comment on the nature of two S-O bonds formed in SO2 molecule. Are the two S-O bonds in this molecule equal ?Preview
- Q22How is the presence of SO2 detected ?Preview
- Q23Mention three areas in which H2SO4 plays an important role.Preview
- Q24Write the conditions to maximise the yield of H2SO4 by Contact process.Preview
- Q25Why is Ka2 > Ka1 for H2SO4 in water?Preview
- Q26Considering the parameters such as bond dissociation enthalpy, electron gain enthalpy and hydration enthalpy, compare the oxidising power of…Preview
- Q27Give two examples to show the anomalous behaviour of fluorine.Preview
- Q28Sea is the greatest source of some halogens. Comment.Preview
- Q29Give the reason for bleaching action of Cl2.Preview
- Q30Name two poisonous gases which can be prepared from chlorine gas.Preview
- Q31Why is ICl more reactive than I2?Preview
- Q32Why is helium used in diving apparatus?Preview
- Q33Balance the following equation: XeF6 + H2O → XeO2F2 + HFPreview
- Q34Why has it been difficult to study the chemistry of radon?Preview