(a) A metallic rod of length 'l' and resistance 'R' is rotated with a frequency 'v' with one end hinged at the

Question

Q. (a) A metallic rod of length 'l' and resistance 'R' is rotated with a frequency 'v' with one end hinged at the centre and the other end at the circumference of a circular metallic ring of radius 'l', about an axis passing through the centre and perpendicular to the plane of the ring. A constant and uniform magnetic field 'B' parallel to the axis is present everywhere.

(i) Derive the expression for the induced emf and the current in the rod.

(ii) Due to the presence of current in the rod and of the magnetic field, find the expression for the magnitude and direction of the force acting on this rod.

(iii) Hence, obtain an expression for the power required to rotate the rod.

(b) A copper coil is taken out of a magnetic field with a fixed velocity. Will it be easy to remove it from the same field if its ohmic resistance is increased?

(OR)

(a) A rectangular coil rotates in a uniform magnetic field. Obtain an expression for induced emf and current at any instant. Also find their peak values. Show the variation of induced emf versus angle of rotation (

\omega t

) on a graph.

(b) An iron bar falling through the hollow region of a thick cylindrical shell made of copper experiences a retarding force. What can you conclude about the nature of the iron bar? Explain.

CBSECBSE Class XII Board 2019Subjective· 5mImportance★★★★★

🔒 Locked · start free trial →

You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.

Start your 14-day free trial to unlock the full solution →

Part (a)Concept understanding — Motional Emf

Motional Emf

When a conductor moves through a magnetic field, the free charges inside it experience a magnetic force. This force pushes the charges along the conductor, setting up a potential difference across its ends — a motional emf. It is electromagnetic induction viewed from a moving conductor rather than from a changing field.

Origin: the Lorentz force

Consider a straight rod of length $l$ moving with velocity $\vec{v}$ perpendicular to a uniform field $\vec{B}$ . Each free charge $q$ feels a force

\vec{F} = q\,(\vec{v}\times\vec{B})

of magnitude $qvB$ directed along the rod. Charges pile up at the ends until the electric field they create balances the magnetic force. The resulting potential difference — the motional emf — is

\varepsilon = Bvl

Consistency with Faraday's law

Let the rod of length $l$ slide along parallel conducting rails, sweeping out a distance $x$ . The enclosed area is $A = lx$ , so the flux is $\Phi = Blx$ . Then

\varepsilon = -\frac{d\Phi}{dt} = -Bl\frac{dx}{dt} = -Blv

The magnitude $Bvl$ matches the Lorentz-force result, showing that the flux rule and the force picture agree.

Worked example

A rod of length $0.4\,\text{m}$ moves at $5\,\text{m/s}$ perpendicular to a field of $0.5\,\text{T}$ :

\varepsilon = Bvl = 0.5\times5\times0.4 = 1\,\text{V}

If the circuit resistance is $2\,\Omega$ , the induced current is $I = \varepsilon/R = 0.5\,\text{A}$ .

Force and energy …

Why this formula?

Motional EMF: Why the Formula Holds

Let's build this from first principles — understanding the why before the formula.

The Core Idea

Motional EMF arises when a conductor moves through a magnetic field. The key insight: moving charges in a magnetic field experience a magnetic force, which acts like a battery pushing charges around the conductor.

Step 1: The Force on a Moving Charge

A charge $q$ moving with velocity $\vec{v}$ in a magnetic field $\vec{B}$ feels the Lorentz magnetic force:

\vec{F}_m = q (\vec{v} \times \vec{B})

This force is perpendicular to both velocity and magnetic field.

Step 2: What Happens Inside a Moving Conductor

Consider a straight metal rod of length $L$ moving with constant velocity $\vec{v}$ perpendicular to a uniform magnetic field $\vec{B}$ (pointing into the page).

Free electrons in the rod are moving with the rod at velocity $\vec{v}$ .
Each electron experiences a magnetic force:

\vec{F}_m = -e (\vec{v} \times \vec{B})

(negative sign because electron charge is $-e$ )

This force pushes electrons along the rod — say, toward one end.

Step 3: Charge Separation Creates an Electric Field

As electrons accumulate at one end, that end becomes negatively charged, leaving the other end positively charged.

This charge separation creates an internal electric field $\vec{E}$ inside the rod, pointing from positive to negative end.
The electric field exerts an opposing force on the electrons:

\vec{F}_e = -e \vec{E}

Step 4: Equilibrium — The "Battery" is Formed

Charge keeps moving until the electric force balances the magnetic force:

\vec{F}_e + \vec{F}_m = 0

-e \vec{E} - e (\vec{v} \times \vec{B}) = 0

\vec{E} = - (\vec{v} \times \vec{B})

Magnitude-wise (for perpendicular $\vec{v}$ and $\vec{B}$ ):

E = vB

Step 5: From Electric Field to EMF

The motional EMF $\mathcal{E}$ is the work done per unit charge to move a test charge from one end to the other:

\mathcal{E} = \int_{\text{negative}}^{\text{positive}} \vec{E} \cdot d\vec{l}

For a uniform field along the rod of length $L$ :

\mathcal{E} = E \cdot L = vBL

The Key Formula

Motional EMF for a straight conductor moving perpendicular to $\vec{B}$ :

$\boxed{\mathcal{E} = B L v}$

Why This Makes Physical Sense

Quantity	Role
$B$	Stronger magnetic field → larger force on charges
$L$	Longer conductor → more charge separation possible

Part (b)Concept understanding — Electromagnetic Induction

Electromagnetic Induction

Electromagnetic induction is the phenomenon in which a changing magnetic flux through a circuit produces an electromotive force (emf) — and hence a current, if the circuit is closed. It is the single idea behind generators, transformers, inductors, and the entire AC power grid.

The Central Discovery

Michael Faraday found (1831) that a current is induced in a coil not when a magnet sits still near it, but only while the magnet moves — that is, only while the magnetic flux linked with the coil is changing. A steady magnet, however strong, induces nothing.

Magnetic Flux

The key quantity is magnetic flux $\Phi_B$ through a surface of area $A$ in a field $\vec{B}$ :

\Phi_B = \vec{B} \cdot \vec{A} = BA\cos\theta

where $\theta$ is the angle between $\vec{B}$ and the area's normal. Its SI unit is the weber (Wb), where $1\ \text{Wb} = 1\ \text{T}\cdot\text{m}^2$ .

Flux can change in three distinct ways, and any of them induces an emf:

the field strength $B$ changes,
the area $A$ of the loop changes,
the orientation $\theta$ changes (a coil rotating in a field — the basis of the generator).

Faraday's Law

The induced emf equals the negative rate of change of flux. For a coil of $N$ turns:

\mathcal{E} = -N\,\frac{d\Phi_B}{dt}

The faster the flux changes, the larger the emf. This is why a magnet dropped quickly through a coil gives a bigger deflection than one moved slowly.

Lenz's Law — the Minus Sign

The negative sign expresses Lenz's law: the induced current flows in the direction that opposes the change producing it. Push a magnet's north pole toward a coil, and the coil's near face becomes a north pole to repel it; pull it away, and the face becomes a south pole to attract it. This is simply energy conservation — you must do work against this opposition, and that work becomes the electrical energy of the induced current.

Motional emf

A special, very useful case: a conducting rod of length $l$ moving with speed $v$ perpendicular to a field $B$ sweeps out area and develops an emf

\mathcal{E} = Blv

Here the emf arises because the free charges in the rod experience a magnetic force $q\vec{v}\times\vec{B}$ , which drives them along the rod. …

Why this formula?

Electromagnetic Induction

Electromagnetic induction is the effect discovered by Faraday: a changing magnetic flux through a circuit drives an induced EMF (and hence a current). The key word is changing — a steady field, however strong, induces nothing.

Magnetic flux

Flux measures how many field lines thread a surface bounded by the loop:

\Phi_B = \int \vec{B} \cdot d\vec{A} = BA\cos\theta

It can change three ways: by changing $B$ , by changing the area $A$ , or by rotating the loop (changing $\theta$ ).

Faraday's law

The induced EMF equals the rate of change of flux:

\mathcal{E} = -\frac{d\Phi_B}{dt}

For a coil of $N$ turns, $\mathcal{E} = -N\,\dfrac{d\Phi_B}{dt}$ . The EMF depends on how fast the flux changes, not on the flux itself — a slow change gives a small EMF, a rapid change a large one.

Lenz's law — the minus sign …

Start your 14-day free trial to unlock the full solution →

Rotating rod: $\mathcal E=\tfrac12 B\omega l^2=\pi B\nu l^2$ , $I=\dfrac{B\omega l^2}{2R}$ , tangential force $F=\dfrac{B^2\omega l^3}{2R}$ , power $P=\dfrac{B^2\omega^2 l^4}{4R}$ ; higher coil resistance makes removal easier.
Rotating coil: $\mathcal E=NBA\omega\sin\omega t$ (peak $NBA\omega$ ); the retarded iron bar must be a magnet.

Part (a) — Rod rotating in a magnetic field

Induced emf and current. As the rod turns with angular speed $\omega=2\pi\nu$ , an element at distance $r$ from the hinge moves with speed $v=\omega r$ . Its motional emf is $d\mathcal E=Bv\,dr=B\omega r\,dr$ . Integrating from centre to rim: $\mathcal E=\int_0^l B\omega r\,dr=\tfrac12 B\omega l^2=\pi B\nu l^2.$ The rod (resistance $R$ ) closes through the ring, so $I=\frac{\mathcal E}{R}=\frac{B\omega l^2}{2R}.$
Force on the rod. The same current $I$ flows through every cross-section. Since the current is directed radially and $\vec B$ is along the axis (perpendicular to the plane), $\vec F=I\,\vec l\times\vec B$ is tangential — directed opposite to the motion (Lenz braking): $F=\int_0^l I B\,dr=IBl=\frac{B\omega l^2}{2R}\cdot Bl=\frac{B^2\omega l^3}{2R}.$
Watch out

The force is not radial. With radial current and axial field, $\vec l\times\vec B$ is azimuthal (tangential), which is why it opposes the rotation.
Power required. The magnetic force on element $dr$ gives torque $d\tau=r\,dF=IBr\,dr$ , so $\tau=\tfrac12 IBl^2$ and $P=\tau\omega=\tfrac12 IBl^2\,\omega=\frac{B^2\omega^2 l^4}{4R}.$ Check by dissipation: $P=I^2R=\left(\dfrac{B\omega l^2}{2R}\right)^2 R=\dfrac{B^2\omega^2 l^4}{4R}.$ ✓ …

Start your 14-day free trial to unlock the full solution →

Same / Similar Concept — real previous-year questions on the same or a closely similar concept, not this exact question.

Showing the 12 most recent of 54 on this concept.

CBSE 2026Set 55/2/11 markMCQ
$Q. A magnet held vertically, with its north pole down, is dropped along the axis of a closed solenoid placed vertically on a table. If the observer looks down from the top, (A) the induced current will flow in the anticlockwise direction. (B) the induced current will flow in the clockwise direction. (C) no induced current will flow in the solenoid. (D) the magnet will fall with a constant velocity.$
›Reveal solutionSolution
As the magnet falls with its north pole down, the downward magnetic flux through the solenoid increases. By Lenz's law the induced current opposes this change — it must produce an upward field inside the solenoid, making the top face a north pole that repels the approaching magnet. That requires an anticlockwise current as seen from above. The correct option is (A).

Why this approach works

Electromagnetic induction is about change: a current is induced in the solenoid only because the flux through it is changing as the magnet falls. The direction of that current is fixed by Lenz's law — the induced current always flows so that its own magnetic field opposes the change in flux that produced it. This is not an arbitrary rule; it is energy conservation. If the induced current aided the magnet's fall, the magnet would speed up and generate ever more electrical energy from nothing.

So the plan is: track what the flux is doing, decide what field the solenoid must create to oppose it, then convert that field direction into a current sense using the right-hand rule.

Step-by-step reasoning

Set up the situation.

The solenoid stands vertically on the table. The magnet is dropped along its axis from above, north pole downward. The observer looks down from the top.

What is the flux doing?

Field lines emerge from the magnet's north pole — here, pointing downward toward the solenoid. As the magnet approaches, the downward flux through the solenoid's turns increases.

What must the induced current do?

By Lenz's law it must oppose the increase of downward flux — so it must produce an upward magnetic field inside the solenoid. Equivalently: the top face of the solenoid must behave as a north pole, repelling the incoming north pole of the magnet.

Convert the field direction into a current sense.

Use the right-hand rule for a coil: curl the fingers of the right hand along the current, and the thumb gives the field inside. For the thumb to point up (toward the observer looking down), the fingers must curl anticlockwise as seen from above. So the induced current is anticlockwise for the top observer.

Tip

Quick pole check: the solenoid must repel the approaching north pole, so its top face is a north pole. Looking at a face that is a north pole, the current always appears anticlockwise (a south-pole face appears clockwise — remember by writing N and S with arrowheads on the letter ends). Same conclusion. …
Start your 14-day free trial to see the full solution →
CBSE 2026Set 55/3/11 markMCQ
$50$
›Reveal solutionSolution
The induced emf is found from Faraday’s law: the change in magnetic flux divided by the time taken. The flux changes from maximum to zero as the loop rotates by $90^\circ$ , giving an average emf of $2.5$ V — but the options are in the range $0.25$ – $1.0$ V, so we must check the calculation carefully. The correct value is $2.5$ V, which does not match any given option; however, if the side length is $50$ cm = $0.5$ m, area $= 0.25$ m², flux change $= 3.0 \times 0.25 = 0.75$ Wb, time $= 0.3$ s, emf $= 0.75/0.3 = 2.5$ V. None of the options are correct as stated.

The core idea here is Faraday’s law of electromagnetic induction: whenever the magnetic flux through a loop changes, an emf is induced. The flux depends on three things — the field strength $B$ , the area $A$ of the loop, and the angle $\theta$ between the field and the normal to the loop. When you rotate the loop, you change $\theta$ , and that changes the flux. The induced emf is the rate of change of flux.

In this problem, the field is uniform and perpendicular to the loop initially. That means the initial angle between the field and the normal is $0^\circ$ , so the flux is maximum. After a $90^\circ$ rotation, the plane of the loop is parallel to the field, so the flux becomes zero. The change in flux is simply the initial flux minus zero.

Let’s work it out step by step.

Find the area of the loop.

Side length $= 50$ cm $= 0.5$ m.

Area $A = (0.5)^2 = 0.25$ m².

Initial magnetic flux.

Flux $\Phi = B A \cos\theta$ .

Initially $\theta = 0^\circ$ , so $\cos 0 = 1$ .

$\Phi_i = 3.0 \times 0.25 \times 1 = 0.75$ Wb.

Final magnetic flux.

After $90^\circ$ rotation, $\theta = 90^\circ$ , $\cos 90 = 0$ .

$\Phi_f = 3.0 \times 0.25 \times 0 = 0$ Wb.

Change in flux.

$\Delta\Phi = \Phi_f - \Phi_i = 0 - 0.75 = -0.75$ Wb.

The magnitude of the change is $0.75$ Wb.

Average induced emf.

By Faraday’s law, $|\mathcal{E}| = \left|\frac{\Delta\Phi}{\Delta t}\right|$ .

$\Delta t = 0.3$ s.

$|\mathcal{E}| = \frac{0.75}{0.3} = 2.5$ V.

Watch out

A common mistake is to forget that the side is given in cm and not convert to metres. If you use $50$ cm as $50$ m, you get an absurdly large area and emf. Another pitfall: using the angle between the field and the plane of the loop instead of the normal. Here, the field is perpendicular to the plane initially, so the normal is parallel to the field — that’s $\theta = 0^\circ$ , not $90^\circ$ . …
Start your 14-day free trial to see the full solution →
CBSE 2026Set V11 markMCQ
$Q. The working principle of an A.C. generator is :$
(a) mutual induction
(b) eddy currents
(c) self induction
(d) electromagnetic induction
›Reveal solutionSolution

(d) electromagnetic induction …

Start your 14-day free trial to see the full solution →
CBSE 2026Set A1 markMCQ
$Q. An example of natural electromagnetic induction is (A) radio (B) television (C) battery charging (D) lightning strike$
›Reveal solutionSolution

Lightning involves huge, rapidly changing currents/fields that induce emf in nearby conductors — natural electromagnetic induction.

Electromagnetic induction is the production of emf by a changing magnetic flux (Faraday's law). A lightning strike carries an enormous, rapidly varying current, producing a fast-changing magnetic field that induces emf/current in nearby loops and conductors — a natu …

Start your 14-day free trial to see the full solution →
CBSE 2026Set A1 markMCQ
$Q. If magnetic field is same but the area of the loop is increased, then the flux (A) increases (B) decreases (C) becomes zero (D) remains unchanged$
›Reveal solutionSolution

Magnetic flux Φ = BA cosθ; with B constant, a larger area gives greater flux.

The magnetic flux through a loop is:

$\Phi=BA\cos\theta$

…

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 markMCQ
$Q. A bicycle wheel with 10 spokes is rotating at a rate of 2 Cycle Per Second perpendicular to the horizontal component of the earth's magnetic field. This produces an induced emf 'E' between the axle and rim of the wheel. If the number of spokes is doubled, then the value of induced emf will be$
(a) 4E
(b) 2E
(c) E
(d) E/2
›Reveal solutionSolution

Each spoke is an independent conducting rod rotating about the same axle in the same field, so each develops the SAME emf; connecting more of them in parallel between axle and rim does not add up their emfs, so E stays unchanged.

For a single conducting rod of length R rotating with angular speed omega in a field B (perpendicular to the plane of rotation), the motional emf between the centre and the rim is E = (1/2) B omega R^2. Every spoke, being identical in length and rotating at the same rate in the same field, develops this same emf E between the axle and the rim. All spokes are connected between the same two po …

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 mark
$Q. What is electromagnetic induction?$
›Reveal solutionSolution

Any change of magnetic flux through a circuit produces an EMF in that circuit - this is electromagnetic induction.

Electromagnetic induction is the phenomenon in which an electromotive force (emf) is induced in a coil or conductor whenever the magnetic flux linked with it changes with time - whether the change is caused by a changing magnetic field, relative motion between the conductor and the field source, or a changing orientation/area of the loop. If the circuit is closed, this induced emf drives an induced current. It is quantitatively described by Faraday's law, EMF = -d(phi)/dt …

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 mark
$Q. When will the magnetic flux linked with a coil held in the magnetic field be zero?$
›Reveal solutionSolution

Flux is zero whenever the field lines lie entirely in the plane of the coil.

Magnetic flux linked with a coil is $\Phi = BA\cos\theta$ , where $\theta$ is the angle between the coil's area vector (normal) and the magnetic field $\vec{B}$ . This is zero when $\cos\theta=0$ , i.e. $\theta=90°$ — meaning the normal to the coil is perpendicular to $\vec{B}$ , which is the same as saying the field lines lie entirely within (parallel to) the plane of the coil, pa …

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 markMCQ
$Q. A conducting rod of length l, rotates about one of its ends in a uniform magnetic field B, with a constant angular velocity ω. If the plane of rotation is perpendicular to B, the e.m.f. induced between the ends of rod is ______.$
(a) (1/2)Bωl²
(b) Bωl²
(c) 2Bωl²
(d) Bωl
›Reveal solutionSolution

A rod rotating about one end sweeps out a circle; summing the motional emf $Bv\,dr$ over its length gives $\varepsilon = \tfrac12 B\omega l^2$ .

Consider a small element of the rod at distance $r$ from the pivoted end, of length $dr$ . Its linear speed is $v = \omega r$ (perpendicular to the rod, in the plane of rotation, hence also perpendicular to $B$ ). The motional emf induced across this element is:

$d\varepsilon = Bv\,dr = B\omega r\,dr$

…

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 mark
$Q. Match the Column A with Column B and write the correct pair. Column A: Magnetic flux. Column B:$
(i) μ₀nI,
(ii) Volt × second,
(iii) μ₀nI/2,
(iv) Volt × meter,
(v) Volt × meter⁻¹,
(vi) Volt.
›Reveal solutionSolution

Magnetic flux unit = weber = Volt × second (from Faraday's law emf = dΦ/dt), option (ii).

Faraday's law states that the induced emf equals the rate of change of magnetic flux: emf = −dΦ/dt. Rearranging, Φ = emf × time (dimensionally). Since emf is in volts and time in seconds, magneti …

Start your 14-day free trial to see the full solution →
CBSE 2026Set ANNUAL1 mark
$Q. Match the Column A with Column B and write the correct pair. Column A: Motional emf. Column B:$
(i) μ₀nI,
(ii) Volt × second,
(iii) μ₀nI/2,
(iv) Volt × meter,
(v) Volt × meter⁻¹,
(vi) Volt.
›Reveal solutionSolution

Motional emf ε = Bvl is a voltage; its unit is volt, option (vi).

When a conductor of length l moves with velocity v perpendicular to a magnetic field B, an emf is induced across it: ε = Bvl. This is an electromotive force, so its …

Start your 14-day free trial to see the full solution →
CBSE 2025Set X11 markMCQ
$Q. Consider the following statements : Statement - 1: A.C. Generator works on the principle of electromagnetic induction Statement - 2: In an A.C. Generator, as the armature is rotated in a uniform magnetic field, the magnetic flux linked with the coil changes which induces an emf in the coil. Among the above two statements :$
(a) Both Statements are true
(b) Both Statements are false
(c) Statement-1 is true and Statement-2 is false
(d) Statement-1 is false and Statement-2 is true
›Reveal solutionSolution

(a) Both Statements are true. An A.C. generator works on electromagnetic induction (Statement 1). As the armature coil rotates in a uniform magnetic field, the flux $\phi = NBA\cos\omega t$ linked …

Start your 14-day free trial to see the full solution →

Part (a) — Rod rotating in a magnetic field

🎓Unlock everything free for 14 days

Unlock everything free for 14 days